Characteristics of ZnO–B2O3–CaO–Na2O–P2O5 glass powders prepared by spray pyrolysis

Fine-sized ZnO–B₂O₃–CaO–Na₂O–P₂O₅ glass powders with spherical shape were directly prepared by high temperature spray pyrolysis. The ZnO–B₂O₃–CaO–Na₂O–P₂O₅ powders prepared by spray pyrolysis at temperatures above 1200 °C had broad peaks at around 30° in the XRD patterns. The glass transition temperatures (T_g) of the glass powders obtained by spray pyrolysis at preparation temperatures between 900 °C and 1400 °C were near 480 °C regardless of the preparation temperatures. The dielectric layers formed from the glass powders prepared by spray pyrolysis at preparation temperatures above 1300 °C had clean surface and dense inner structure at the firing temperature of 580 °C. The transmittance of the dielectric layer formed from the glass powders obtained by spray pyrolysis at preparation temperature of 1400 °C was 90% at the firing temperature of 580 °C, in which the thickness of the dielectric layer was 13 μm. The UV cutoff edges gradually shift towards longer wavelength with increasing the preparation temperature of glass powders and the firing temperature of dielectric layers.     

Effect of CaO on the surface morphology and strength of water soaked Na2O–B2O3–Al2O3–SiO2 vitrified bond

The surface morphology of Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond with and without calcium oxide was studied by soaking vitrified bonded microcrystalline alumina composites in water. The content of water introduced to the vitrified bond was determined by thermal gravity analysis, and the effects of water and calcium on the phase separation and nucleation of the vitrified bond were investigated using scanning electron microscope and energy-dispersive X-ray spectrometer. Soaked in water for 72 h, the Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond presented a porous surface, and its bending strength declined with increasing sintering temperature. However, the Na₂O–CaO–B₂O₃–Al₂O₃–SiO₂ vitrified bond was more durable against aqueous coolant even needle-shape crystals were found clustered on the surface of the vitrified bond. The crystals were enriched with aluminosilicate tested by energy-dispersive X-ray spectrums. The appearance of crystals lessened the dissolution of the vitrified bond and made the bending strength increase in the sintering temperature region between 870 °C and 930 °C.     

Glass formation in the PbBr2–PbCl2–PbF2–PbO–P2O5 system

New glasses in the PbBr₂–PbCl₂–PbF₂–PbO–P₂O₅ system have been prepared and characterized. The glass-forming regions have been explored and the stability of the glasses against crystallization studied. Results show that the PbBr₂–PbCl₂–P₂O₅ ternary system has a broad glass-forming region which extends to 30 mol% P₂O₅. Most of the glasses in this system show strong stability against crystallization and some have glass transition temperatures as low as 146°C. When 5% PbO or 5% PbF₂ is introduced into the PbBr₂–PbCl₂–P₂O₅ system, the glass-forming region becomes smaller and the glass transition temperatures increase. However, the introduction of 2.5% PbF₂ and 2.5% PbO into the ternary system increases the glass transition temperature and broadens the glass-forming region. The introduction of PbF₂ alone improves the glass-forming ability of the system while the introduction of PbO alone lowers the glass-forming ability.     

Solubility of YBa2Cu3O7−δ and Nd1+xBa2−xCu3O7±δ in the BaO/CuO flux

The knowledge of the phase relations and solubilities in the Y–Ba–Cu–O and Nd–Ba–Cu–O systems are of fundamental importance for crystal growth and liquid-phase epitaxy of YBa₂Cu₃O_7−δ (YBCO) and Nd_1+xBa_2−xCu₃O_7±δ (NdBCO). The determination of the solubility curve of YBCO and NdBCO in a BaO/CuO flux containing 31 mol% BaO was done by observation of the formation and dissolution of crystals on the surface of the high-temperature solution. The heat of the solution of YBCO at 1000°C was found to be 34.7 kcal/mol, and for NdBCO at 1060°C, it was found to be 28.1 kcal/mol. The determination of the solubility curves requires special care, and the problems of the time-dependent shift of the solution composition due to the corrosion of the crucible is discussed. The scatter of the solubility data published by different authors could be due to the use of solutions with different Ba : Cu ratios, different determination methods, i.e. different crystallization mechanisms, different crucibles and starting chemicals.     

B NMR investigations in xV2O5–B2O3 and xV2O5–B2O3–PbO glasses

11B (I=3/2) MAS NMR in the binary glass system xV₂O₅–B₂O₃ (x=0.053, 0.43) and the ternary glass system xV₂O₅–B₂O₃–PbO (0.1x1.5) has been investigated at room temperature. In the xV₂O₅–B₂O₃ glasses, one NMR line due to BO₃ unit was observed. Meanwhile in the xV₂O₅–B₂O₃–PbO, two NMR lines which arise from BO₃ and BO₄ units were detected, where the appearance of BO₄ units is produced by the presence of PbO. From the computer-simulation of the ¹¹B NMR central transition line (m=−1/2↔1/2), the quadrupole parameters (e²qQ/h and η) for BO₃ units in xV₂O₅–B₂O₃, and those for BO₃ and BO₄ units in xV₂O₅–B₂O₃–PbO were obtained as a function of x. As the V₂O₅ content increases in xV₂O₅–B₂O₃–PbO, the e²qQ/h and η values of the BO₃⁻ associated resonance are found to slightly decrease and increase, respectively. Meanwhile, the e²qQ/h and η values of BO₄⁻ associated resonance in xV₂O₅–B₂O₃–PbO are found to slightly increase and decrease, respectively. By comparing the intensities of the total transitions (m=−3/2↔−1/2,m=−1/2↔1/2, and 1/2↔3/2) for the ¹¹B NMR line of BO₃ and BO₄ units contained in xV₂O₅–B₂O₃–PbO with those of respective standard samples of 0.053V₂O₅–B₂O₃ and NaBH₄, the quantitative fractions of BO₃ and BO₄ in xV₂O₅–B₂O₃–PbO were obtained as a function of x.     

Study of electrical properties of MoO3–Fe2O3–P2O5 and SrO–Fe2O3–P2O5 glasses by impedance spectroscopy. II

The electrical and dielectric properties for three series of MoO₃–Fe₂O₃–P₂O₅ and one series of SrO–Fe₂O₃–P₂O₅ glasses were measured by impedance spectroscopy in the frequency range from 0.01 Hz to 3 MHz and over the temperature range from 303 to 473 K. It was shown in Part I that the MoO₃ is incorporated into phosphate network and the structure/properties are strongly influenced by the overall O/P ratio. The Fe₂O₃ content and Fe(II)/Fe_tot ratio in these glasses have significant effects on the electrical conductivity and dielectric permittivity. With decreasing Fe₂O₃ content in MoO₃–Fe₂O₃–P₂O₅ glasses with O/P at 3.5 the dc conductivity, σ_dc(ω) decreases for two orders of magnitude, which indicates that the conductivity for these glasses depends on Fe₂O₃ and is independent of the MoO₃ content. Also, the dielectric properties such as ^′(ω), ^″(ω) and σ_ac(ω) and their variation with frequency and temperature indicates a decrease in relaxation intensity with increase in the concentration of MoO₃. On the other hand, the dc conductivity for MoO₃–Fe₂O₃–P₂O₅ glasses with O/P > 3.5 increases with the substitution of MoO₃ which has been explained by an increase in the number of non-bridging oxygens and formation of Fe–O–P bonds that are responsible for formation of small polarons. The increase in the dielectric permittivity, ^′(ω) with increasing MoO₃ content is attributed to the increase in the deformation of glass network with increasing bonding defects. For SrO–Fe₂O₃–P₂O₅ glasses the conductivity and dielectric permittivity remained constant with increasing SrO.     

Crystallization of In2O3 by vapor reaction

Crystallization of In₂O₃ occured in closed porcelain crucibles in air at 960–1200°C by vapor phase reaction of In₂O or In vapor with the oxygen diffusing into the system. The In₂O or In vapors were thermally generated from mixtures such as graphite/In₂O₃, graphite/In, In₂O₃/In and graphite/In₂O₃/In. The graphite/In₂O₃ system at a mole ratio of 30/1 and 1000°C produced yellow, transparent needle crystals with a maximum size of 0.5 X 0.5 X 8 mm and electrical resistivity of 5.5 X 10^-2 ω cm at 25°C.     

Solidification of superalloy in a SiO2–ZrO2–B2O3 coating mould

The preparation of glass-lined coating mould from gels in the ternary system of SiO₂–ZrO₂–B₂O₃ has been investigated. The crystallization characterization and high temperature structure stability of this coating mould are demonstrated. We can find that the crystallization of t-ZrO₂ as well as the tetragonal to monoclinic phase transformation are, respectively, retarded and impeded owing to the encasement of SiO₂ matrix. While the inhibitive effect of B₂O₃ on crystallization of the SiO₂–ZrO₂–B₂O₃ coating mould is explained. Finally, DD3 single crystal superalloy melt can realize highly undercooled rapid solidification by adopting this coating mould, which further evinces that SiO₂–ZrO₂–B₂O₃ coating mould has an ideal nucleation inhibition for superalloy.     

Synthesis of Y2O3:Eu phosphors by bicontinuous cubic phase process

A novel approach for preparation of red-emitting europium-doped yttrium oxide phosphor (Y₂O₃:Eu) by using the bicontinuous cubic phase (BCP) process was reported in this paper. The BCP system was composed of anionic surfactant sodium bis(2-ethylhexyl)sulfosuccinate (AOT) and aqueous yttrium nitrate/europium nitrate solution. Energy dispersive spectrometer analysis revealed the homogeneous precipitation occurred in the BCP structure. Thermogravimetric analysis measurements indicated the precursor powder was europium-doped yttrium hydroxide, Y_1−xEu_x(OH)₃. Scanning electron microscopy micrographs showed the precursor powder had a primary size about 30 nm and narrow size distribution. After heat treatment in furnace above 700 °C for 4 h, high crystallinity Y₂O₃:Eu phosphors was obtained. However, the primary size of particles grew to 50–200 nm and the dense agglomerates with a size below 1 μm were formed. X-ray diffraction patterns indicated the crystal structure of precursor powders and Y₂O₃:Eu phosphors were amorphous and body-centered cubic structure, respectively. The photoluminescence analysis showed that the obtained Y₂O₃:Eu phosphor had a strong red emitting at 612 nm and the quenching started at a Eu concentration of 10 mol%. This study indicated that the BCP process could be used to prepare the highly efficient oxide-based phosphors.     

Phase relations around langasite (La3Ga5SiO14) in the system La2O3–Ga2O3–SiO2 in air

Phase relations around langasite (LGS, La₃Ga₅SiO₁₄) were studied on the basis of phase assemblage observed during calcination and crystallization process of samples of various compositions in the ternary system La₂O₃–Ga₂O₃–SiO₂. A ternary compound of apatite structure, La₁₄Ga_xSi_9–xO_39–x/2 was found for the first time. Crystallization of this compound was observed in the cooling process of molten samples of stoichiometric LGS as well as LGS single crystal, demonstrating that LGS is an incongruent-melting compound. A phase diagram was established primarily based on the crystallization sequence in the cooling process.     

TiO2-SiO2 monolithic glass formation from sol-gel

This study demonstrates that hydrolysis should be carried out in a step manner in gel synthesis. The key to the increase in the amount of water added is the control of the hydrolysis rate of Ti(OC₄H₉)₄. The hydrolysis of Si(OC₂H₅)₄ can be carried out at about 75°C. The amount of added water (γ_WI), which varied with TiO₂ content (in mol%), was about 64–88% of the total amount of added water. The hydrolysis reaction should be performed at room temperature while Ti(OC₄H₉)₄ is added. The total amount of added water (γ_W) is related to the amount of solvent (R). For example, if TiO₂ is 40mol%, γ_W will vary from 3.2 to 8.0 when R varies from 0.8 to 2.0. The amount of added water was affected by the distribution of solvent in the metal alkoxides. The amount of added water can be increased when R_Si(OC2H5)4 = 1, R_Ti(OC4H9)4 > 1. The rate of rise in temperature of the thermolysis of the dried gel should be less than 10°C per hour, and the heat treatment temperatyre is related to the TiO₂ content (in mol%). Gel glasses without devitrification can only be obtained by thermolysis at 600°C from the gel with no less than 20 mol% TiO₂.     

Growth and spectroscopic properties of Er single doped and Er–Yb co-doped YAl3(BO3)4 crystals

Er³⁺-doped and Er³⁺–Yb³⁺ co-doped yttrium aluminum borate (YAB) single crystals have been grown by the top-seeded solution growth method using a new flux system, namely NaF–MoO₃–B₂O₃. The Er³⁺ concentrations were 1.3 mol% for both single doped and co-doped crystals and the Yb³⁺ concentration in the Er³⁺–Yb³⁺ co-doped crystal was 20.0 mol% in the raw materials. The distribution coefficients of Er³⁺ single doped and Er³⁺–Yb³⁺ co-doped crystals were measured. The polarized absorption and fluorescence spectra of Er³⁺–Yb³⁺ co-doped crystal were recorded and compared with those of Er³⁺ single doped crystal. The results demonstrate that Er³⁺–Yb³⁺ co-doped YAB crystal is a potential candidate for 1.55 μm laser materials.     

The effect of mixed alkaline earths on the diffusivity and the incorporation of iron in 5Na2O · xMgO · (15−x)CaO · yAl2O3 · (80−y)SiO2 melts

Diffusion coefficients of iron were measured in glass melts with the basic compositions 5Na₂O · xMgO · (15−x)CaO · yAl₂O₃ · (80−y)SiO₂ with x=5, 10 and y=0, 5, 7.5, 10 and 15. The melts were doped with 0.25 mol% Fe₂O₃ and studied in the temperature range from 1000 to 1600 °C using square-wave voltammetry. The voltammograms exhibited distinct peaks attributed to the reduction of Fe³⁺ to Fe²⁺, from which peak currents mixed diffusion coefficients of iron were calculated. Diffusion coefficients in all melt compositions which did not show crystallization could be fitted to Arrhenius equation. The diffusivities measured in different melt compositions were related to the same viscosity, i.e. not the same temperature. Increasing the alumina concentration from 5 to 10 mol% resulted in an increase of the viscosity corrected diffusivities. At further increasing alumina concentrations, the diffusivities get smaller again. This can be explained by the stabilizing effect of Na⁺ and Ca²⁺ on FeO⁻₄ and AlO⁻₄-tetrahedra, which strengthens the incorporation of Fe³⁺ into the glass structure.     

Facile synthesis of submicron BaTiO3 crystallites by a liquid–solid reaction method

Uniform, submicron BaTiO₃ crystallites in tetragonal structure were synthesized by a novel low-temperature liquid–solid reaction method mainly via two simple steps: firstly, BaO₂·H₂O₂ submicron particles of about 130–450 nm were precipitated from the reaction of BaCl₂ and H₂O₂ in a slightly alkaline (pH 8) aqueous solution under the ambient condition; secondly, tetragonal phase BaTiO₃ submicrocrystals with the size in the range of 180 to 400 nm could be produced by subjecting the as-prepared BaO₂·H₂O₂ and commercial TiO₂ submicron particles to thermal treatment in air at 700 °C for 10 h. The as-obtained products were characterized by X-ray powder diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and inductively coupled plasma-atomic emission spectroscopy, and scanning electron microscopy.     

The effect of MgO on the thermodynamics of the Fe/Fe-redox equilibrium and the incorporation of iron in soda-magnesia-aluminosilicate melts

Melts with the basic compositions 10Na₂O · 10MgO · xAl₂O₃ · (80−x)SiO₂ (x=0, 5, 10, 15 and 20), 10Na₂O · xMgO · 10Al₂O₃ · (80−x)SiO₂ (x=5, 10, 15 and 20) and xNa₂O · 10MgO · 10Al₂O₃ · (80−x)SiO₂ (x=5, 10 and 15) all doped with 0.25 mol% Fe₂O₃ were studied using square-wave voltammetry. The temperatures applied were in the range of 1000–1600 °C. The square-wave voltammograms recorded show peaks caused by the reduction of Fe³⁺ to Fe²⁺. The attributed peak potentials measured decreased linearly with decreasing temperatures. Increasing the MgO-concentration led to more negative peak potentials. Introducing alumina in the melt first resulted in less negative peak potentials. If the molar Al₂O₃-concentration is equal to that of Na₂O (=10 mol%) the peak potentials are least negative. Further increase of the Al₂O₃-concentration led to more negative peak potentials. The variation of the Na₂O-concentration led to a maximum in the peak potentials at an Na₂O-concentration of 10 mol%. An empirical formula which allows the calculation of standard potentials from the chemical composition is proposed. Furthermore, a structural explanation for the effect of the chemical composition is given. Especially, the incorporation of Al₂O₃ as AlO₄⁻-tetrahedra at [Al₂O₃] < [Na₂O] and as network modifier at larger concentrations was structurally explained by the similarities of Fe²⁺ and Mg²⁺, with respect to cation radii and metal–oxygen bond lengths.     

Mössbauer studies on some glasses and crystals in the Na2O---Fe2O3---SiO2 system

Mössbauer absorption measurements have been made at room temperature on ⁵⁷Fe in iron sodium silicate glasses containing 3–15 mol% Fe₂O₃ and various iron alkali silicate crystals in order to study the state of iron in these glasses. The spectra of all the glasses gave one doublet with a quadrupole splitting varying from 0.73–0.78 mm s⁻¹, while those of Na₂O · Fe₂O₃ · 4 SiO₂ and 5 Na₂O · Fe₂O₃ · 8 SiO₂ crystals showed much smaller quadrupole splitting, 0.28 mm s⁻¹ and 0.10 mm s⁻¹, respectively, and an asymmetrical doublet of much narrower linewidth. When sodium was replaced by other alkali metals of larger size, such as K and Cs, in MFeSi₂O₆ and MFeSi₃O₈ crystals, the quadrupole splitting became wider and approached to 0.73 mm s⁻¹. Such a variation was not observed for glasses. These results suggest that a larger number of non-identical sites exist in iron sodium silicate glasses than in the corresponding crystals.     

Hydrothermal growth of single-crystal CaV6O16·3H2O nanoribbons

CaV₆O₁₆·3H₂O nanoribbons have been prepared by the hydrothermal method in the presence of sodium dodecyl sulfate (SDS) at 160°C for 10 h. X-ray diffraction pattern indicates that the sample is monoclinic phase of CaV₆O₁₆·3H₂O with the lattice contents a=12.18 Å, b=3.598 Å, c=18.39 Å, β=118.03°. Field emission scanning electron microscopy shows that the nanoribbons have widths in the range of 150–500 nm, thicknesses of 30–60 nm and lengths of 500 mm X-ray photoelectron spectrum measurements further confirm the formation of the CaV₆O₁₆·3H₂O phase. The formation of CaV₆O₁₆·3H₂O nanoribbons is a self-assembling process, in which surfactant SDS plays the role of soft template.     

Viscosity matching of new PbF2–InF3–GaF3 based fluoride glasses and ZBLAN for high NA optical fiber

New multicomponent PbF₂–InF₃–GaF₃ bulk glasses have been investigated. They show lower phonon energy (540 cm⁻¹) in comparison with 580 cm⁻¹ for ZBLAN. Large PbF₂ concentration provided glasses with high refractive index up to 1.582 and the viscosity curves revealed an excellent thermal compatibility with ZBLAYN glass. A multimode fiber with a numerical aperture of 0.51, a loss of 0.85 dB/m at 1.3 μm was fabricated using the rotational casting method.     

Growth and self-frequency doubling laser output of Nd : Ca4Gd0.275Y0.725O(BO3)3 crystal

In this letter, Nd : Ca₄Gd_0.275Y_0.725O(BO₃)₃ (Nd : GdYCOB) single crystal with good optical quality and large size has been grown by the Czochralski method. The absorption and fluorescence spectra have been measured. The self-frequency doubling (SFD) laser output of Nd : GdYCOB at 0.53 μm has been demonstrated when a Nd : GdYCOB crystal sample with dimensions of 3 mm×3 mm×7 mm (the phase-matched angle is θ=78.8°, Φ=90°) is pumped by a cw Ti : sapphire laser.     

Characterisation of semiconducting V2O5–Bi2O3–TeO2 glasses through ultrasonic measurements

Tellurite containing vanadate (50−x)V₂O₅–xBi₂O₃–50TeO₂ glasses with different bismuth (x=0, 5, 10, 15, 20 and 25 wt%) contents have been prepared by rapid quenching method. Ultrasonic velocities (both longitudinal and shear) and attenuation (for longitudinal waves only) measurements have been made using a transducer operated at the fundamental frequency of 5 MHz in the temperature range from 150 to 480 K. The elastic moduli, Debye temperature, and Poisson’s ratio have been obtained both as a function of temperature and Bi₂O₃ content. The room temperature study on ultrasonic velocities, attenuation, elastic moduli, Poisson’s ratio, Debye temperature and glass transition temperature show the absence of any anomalies with addition of Bi₂O₃ content. The observed results confirm that the addition of Bi₂O₃ modifier changes the rigid formula character of TeO₂ to a matrix of regular TeO₃ and ionic behaviour bonds (NBOs). A monotonic decrease in velocities and elastic moduli, and an increase in attenuation and acoustic loss as a function of temperature in all the glass samples reveal the loose packing structure, which is attributed to the instability of TeO₄ trigonal bipyramid units in the network as temperature increases. It is also inferred that the glasses with low Bi₂O₃ content are more stable than with high Bi₂O₃ content.