Synthesis of ionic polymers by free radical polymerization using aprotic trimethylsilylmethyl-substituted monomers

Aprotic ionic polymers containing trimethylsilylmethyl-substituted imidazolium structures are synthesized using free radical polymerization of monomers comprising a vinyl group either at the cation or at the anion. Bulk polymerization is used for the room temperature ionic liquid monomer 1-trimethylsilylmethyl-3-vinylimidazolium bis(trifluoromethylsulfonyl)imide. In contrast to this, solution polymerization is applied for 1-trimethylsilylmethyl-3-methylimidazolium p-styrene sulfonate because this monomer undergoes self-polymerization during melting at a higher temperature than selected for bulk polymerization. Glass transition temperature (T _g) of the ionic polymers and intrinsic viscosity measurements indicate differences between these polymers, which are composed either of a polycation with a trimethylsilylmethyl substituent at each vinylimidazolium segment of the polymer chain and mobile bis(trifluoromethylsulfonyl)imide (NTf₂⁻) anions or a polyanion containing p-styrene sulfonate segments and mobile 1-trimethylsilylmethyl-3-methylimidazolium cations. The new aprotic ionic polymers containing trimethylsilylmethyl substituents may be interesting for application in adhesive, interlayer and membrane manufacturing.     

Surface grafted sulfobetaine polymers via atom transfer radical polymerization as superlow fouling coatings

One of the sulfobetaine methacrylate (SBMA) monomers, N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine, was polymerized onto initiator-covered gold surfaces using atom transfer radical polymerization (ATRP) to form uniform polymer brushes. Self-assembled monolayers (SAMs) with ATRP initiators were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The thickness of grafted poly(SBMA) films was measured by ellipsometry. Fibrinogen adsorption on poly(SBMA) grafted surfaces was measured with a surface plasmon resonance (SPR) sensor. Two approaches were compared to graft ATRP initiators onto gold surfaces for surface polymerization and subsequent protein adsorption on these polymer grafted surfaces. The first was to prepare a SAM from omega-mercaptoundecyl bromoisobutyrate onto a gold surface. Superlow fouling surfaces with well-controlled poly(SBMA) brushes were achieved using this approach (e.g., fibrinogen adsorption <0.3 ng/cm2). The second approach was to react bromoisobutyryl bromide with a hydroxyl-terminated SAM on a gold surface. Although protein adsorption decreased as the density of surface initiators increased, the surface prepared using the second approach was not able to achieve as low protein adsorption as the first approach. Key parameters to achieve superlow fouling surfaces were studied and discussed.     

Synthetic strategies to well-defined polymers by ionic polymerization

The living cationic polymerization and sequential copolymerization of isobutylene and styrene has been achieved. Polymethylmethacrylate-g-polyisobutylene graft copolymers have been prepared by the combination of living cationic and group transfer polymerization.     

Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.     

Microstructure of polymers obtained by cationic polymerization of endo-dicyclopentadiene

endo-Dicyclopentadiene (DCPD) was polymerized by various cationic initiating systems in different solvents. IR and ¹H NMR results show that four types of structural units are formed due to the corresponding addition modes: the addition on the norbornenic (NB) double bond generates unit I and rearranged unit II, while the addition on the cyclopentenic (CP) double bond produces unit III and rearranged unit IV. The reaction medium has a stronger effect on the microstructure of the polymer (PDCPD) than initiating systems. The polymers prepared in toluene and n-hexane contain all four structural units, while the polymer produced in methylene chloride is composed of structural units II and IV. © 1996 John Wiley & Sons, Inc.     

Tertiary amine-functionalized polymers by atom transfer radical polymerization

The quantitative synthesis of tertiary amine-functionalized polymers by atom transfer radical polymerization is reported. Tertiary amine-functionalized polystyrene was prepared with the adduct of 1-(bromoethyl)benzene with 1-(4-dimethyl-aminophenyl)-1-phenylethylene as an initiator in the atom transfer radical polymerization of styrene in the presence of a copper (I) bromide/2,2′-bipyridyl catalyst system. The polymerization proceeded via a controlled free-radical polymerization process to afford quantitative yields of the corresponding tertiary amine-functionalized polystyrene with predictable number-average molecular weights (1600–4400), narrow molecular weight distributions (1.09–1.31), and an initiator efficiency of 0.95. The polymerization process was monitored by gas chromatographic analysis. The tertiary amine-functionalized polymers were characterized by thin-layer chromatography, size exclusion chromatography, potentiometry, and spectroscopy. All experimental evidence was consistent with quantitative functionalization via the 1,1-diphenylethylene derivative. Polymerization kinetic measurements showed that the polymerization reaction followed first-order-rate kinetics with respect to monomer consumption and that the number-average molecular weight increased linearly with monomer conversion. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2058–2067, 2001     

Effect of sovents on radiation-induced ionic graft polymerization

The influence of various solvents on radiation-induced cationic (grafting of vinyl-n-butyl ether onto polyethylene) and anionic (grafting of 2-methyl-5-vinylpyridine onto polyethylene) graft polymerization was studied. This ionic grafting was performed in thoroughly dried systems at room temperature. It was established that electron-acceptor solvents promote cationic grafting but that electron-donor solvents promote the anionic. A clear correlation between the donor number of solvents and grafting value by the anionic mechanism was shown. There was no correlation between dielectric constants and grafting values. The reaction orders, according to monomer concentration by 2-methyl-5-vinylpyridine grafting in various solvents, were equal to approximately 1.5 and 2 for the radical and anionic mechanisms, respectively. The effect of solvents on radiation-induced ionic graft polymerization is discussed. The results of this study indicate the correct choice of solvents for radiation-induced ionic grafting.     

Synthesis of water-soluble fullerene-containing vinyl polymers by low-temperature radiation-induced living polymerization

Water-soluble polymers of acrylamide and acrylic acid that contain fullerene (more than 90% C₆₀) have been prepared by the low-temperature radiation-induced living polymerization. In the absorption spectra of these polymers, a monotonically decaying absorption typical of the covalently bound fullerene or its associates is observed in the range 240–700 nm. The radiation initiation of the process allows preparation of high-purity polymers useful for designing medicinal preparations.     

Dehalogenation of polymers prepared by atom transfer radical polymerization

Polymers prepared by atom transfer radical polymerization (ATRP) have well‐defined end groups, predetermined by the initiator used. A typical initiator is an alkyl halide from which the halogen is transferred to one chain end. To remove the halogen end group, dehalogenation with trialkyltin hydride has been used. Procedures for the removal of the polymer halogen end groups are described, one of them being a one‐pot reaction where the dehalogenation of the polymer chain ends occurs immediately after polymerization.     

Tailoring of polymers by combination of ionic and radical controlled polymerizations

Poly(methyl methacrylate)s with terminal bromine atom, prepared by bromination of anionically polymerized MMA, were used as ATRP macroinitiators giving di- and triblock copolymers with MMA, styrene and butyl acrylate blocks. Multifunctional ATRP macroinitiators were synthesized by introducing bromomethyl or 2-bromoacyloxy groups onto the main chain of polystyrene or poly(4-methyl styrene) and used for ATRP grafting of tert-butyl acrylate leading to densely grafted copolymers with more or less uniform grafts.     

PMMA‐grafted dextran glycopolymers by atom transfer radical polymerization

The four‐step synthesis of amphiphilic glycopolymers associating dextran as backbone and poly(methyl methacrylate) (PMMA) as grafts is reported, using the “grafting from” strategy. In the first step, the dextran OH functions were partially acetylated. The second step consisted in linking initiator groups by reaction of 2‐bromoisobutyryl bromide (BⁱBB) with the unprotected OH functions. Third, the atom transfer radical polymerization (ATRP) of methyl methacrylate was carried out in DMSO from the resulting dextran derivative used as a macroinitiator. Finally, the cleavage of the acetate groups led to the expected glycopolymers. Careful attention was given both to the copolymer structure and the control of polymerization. PMMA grafts were analyzed by SEC‐MALLS after their deliberate cleavage from the backbone to evidence a controlled polymerization. Moreover, the mildness of the final deprotection conditions was proved to ensure acetate cleavage without either degrading dextran backbone and PMMA grafts or cleaving grafts from dextran backbone. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7606–7620, 2008     

The influence of ionic liquid's nature on free radical polymerization of vinyl monomers and ionic conductivity of the obtained polymeric materials

Various 1,3‐dialkylimidazolium and tetraalkylphosphonium ionic liquids (ILs), including novel ones, have been studied as reaction media for free radical polymerization of methyl methacrylate (MMA), acrylonitrile (AN) and 1‐vinyl‐3‐ethylimidazolium salts (ViEtIm⁺)Y^?. The influence of IL's nature upon the polymer formulation was investigated. The use of different ionic liquids allows not only to obtain the polymers with high molecular weight (PMMA, up to 5,770,000 g/mol; PAN, up to 735,000 g/mol and poly[(ViEtIm⁺)Y^?], up to 1,130,000 g/mol) in high yields, but also to control the polymerization rate and molecular mass. The physicochemical characteristics, including mechanical properties, thermal stability and heat‐resistance of the obtained polymers were studied in order to compare with those of polymers prepared in a traditional media. It was found that elongation, tensile modulus and strength of PAN, which was synthesized in ionic liquid, are reliatively higher. The influence of IL's nature upon their ionic conductivity and the formation of conductive polymers from molten‐salt‐type vinyl monomers was investigated. Molecular design of the polymers simultaneously with the influence of IL's nature in order to achieve higher ionic conductivity is discussed. Flexible, transparent polymer films, obtained in different ways, show relatively high ionic conductivity (of about 10^?5 S cm^?1 at 20°C). Copyright © 2006 John Wiley & Sons, Ltd.     

Hydrogels obtained by radiation-induced polymerization as delivery systems for peptide and protein drugs

The controlled release of peptides and proteins from hydrogels obtained by radiation-induced polymerization of 2-hydroxyethyl methacrylate at a low temperature was studied. It was found that the extent of release progressively decreased as protein molecular weight increased until no further release occurred above a critical value of the latter. However, an increasing rate of protein release was found if the polymerization was carried out in the presence of poly(ethylene glycol), PEG. Moreover, only with high molecular weight PEGs were large proteins released. The release data as a function of swellability and porosity of polymer matrices were discussed.     

Cell culture on polymers prepared by radiation-induced polymerization of various glass-forming monomers

The growth of cells on polymers prepared by the radiation polymerization of monomethacrylate and dimethacrylate was investigated. Cell growth was affected greatly by such properties of the polymers as water content, wettability, and porosity. Growth was promoted remarkably by rinsing the polymers with warm water at 60-70 degrees C and by irradiation of polymers with an electron beam. Cell growth decreased with increasing oxyethylene length (n) in the polymerized dimethacrylate of same series, CH2C(CH3)CO(OCH2CH2)nOCOC(CH3)CH2. A decrease in the hydrophilicity of the polymer increased cell growth rate. Formation of pore structures in the polymer films also increased the cell growth.     

New (Co)polymers by atom transfer radical polymerization

The fundamentals of atom transfer radical polymerization (ATRP) are presented. This includes the mechanistic considerations including structure of active and dormant species and structural features of the catalyst and reaction conditions as well as the nature of initiation and propagation steps. Extension of homogeneous polymerization to heterogeneous systems including emulsion polymerization is presented. Synthesis of (co)polymers with predefined molecular weights and low polydispersites as well as with controlled compositions, functionalities and architectures is reviewed.     

Glucose sensors based on enzyme immobilization onto biocompatible membranes obtained by radiation-induced polymerization

Amperometric glucose biosensors based on glucose oxidase immobilized onto poly(2-hydroxyethylmethacrylate) membranes obtained by γ radiation-induced polymerization were constructed. In a threeelectrode configuration, smooth or platinized platinum electrodes with different shapes were used, in order to detect the amount of hydrogen peroxide produced in the glucose oxidation. A saturated calomel electrode and a platinum foil were used as a reference and counterelectrode, respectively. The biocompatible obtained sensors were characterized as regards the temperature effect, the response, and lifetime. The determination of glucose in standard solutions was carried out, and linear calibration curves were obtained. Depending on the electrode configuration, the sensor had a response time of 1–4 min, and the measuring range extended from 5 × 10^?5 to 4 × 10^?3M.     

Multifunctional polymer dispersions for biomedical assays obtained by heterophase radical polymerization

Methods for the preparation of multifunctional dispersions of polymer particles (DPP) in the course of free radical heterophase polymerization, which provides careful control of both macromolecular and colloidal properties, are considered. Approaches that, according to the polymerization technique, make it possible to control the particle diameter and shape, particle size distribution, colloidal stability, morphology, surface chemistry and functionality, as well as the formation of organo-inorganic hybrid particles, are demonstrated. The possibilities of DPP application in homogeneous and heterogeneous assays and cell labelling are reviewed. The use of DPP leads to decrease the reaction scales and costs and to increase the speed, sensitivity, selectivity, and reproducibility of assays.