Electrochemical reduction of 1,4-dihalobutanes at carbon cathodes in dimethylformamide

Cyclic voltammetry and controlled-potential electrolysis have been employed to investigate the electrochemical behavior of 1,4-dibromo-, 1,4-diiodo-, 1-bromo-4-chloro- and 1-chloro-4-iodobutane at glassy carbon cathodes in dimethylformamide containing tetramethylammonium perchlorate. Depending on the identity of the 1,4-dihalobutane electrolyzed and the choice of potential, reduction of these compounds leads to a myriad of products including cyclobutane, n-butane, n-octane, 1-butene, cis-and trans-2-butene, 1,3-butadiene, ethylene, 1-chlorobutane, 1-bromobutane, 1-iodobutane, 1-iodooctane, 1,4-dichlorobutane, 1,8-dichlorooctane, and 1,8-diiodooctane. Experiments involving the use of proton donors (phenol and 1,1,1,3,3,3-hexafluoro-2-propanol), a radical trap (norbornylene), and several deuterium ion or atom donors have been utilized to elucidate the mechanisms by which the various electrolysis products are formed.     

1H-NMR study of polyisoprenes

¹H-NMR spectra of polyisoprene were assigned using polymers of isoprene-1,1,4,4-d₄, isoprene-1,1,5,5,5-d₅, and isoprene-4,4-d₂ polymerized with various catalysts. The methylene-proton signal at 2.1 ppm in cis-1,4 - and trans-1,4-polyisoprenes was divided into H₄- and H₁-proton signals; H₄ resonated at 2.21 ppm in both cis-1,4 and trans-1,4 units whereas H₁ resonated at 2.05, 2.21, and 2.15 ppm. Splitting due to the dyad sequences of 1,4 and 3,4 units was apparent. The methine-proton (H₃) in a 3,4 unit showed a broad peak centered around 1.5 ppm in C₆D₆. The overlapping of this signal with the methyl-proton signals at 1.73 and 1.63 ppm resulted in some uncertainty in the determination of the microstructure of polyisoprene which contained a considerable amount of 3,4 unit.     

Synthesis of difunctional 1,4-dimethyl-1,4-disilacyclohexanes

Transformations of HVinSiCl₂, HVinSi(Me)Cl, HVinSi(Me)Ph, and HVinSi(Me)NEt₂ in the presence of Pt catalyst were studied. In dilute solutions, the reaction gave a mixture of structural and stereoisomers of five- and six-membered disilacyclanes, resulting from intramolecular cyclization of the initially formed linear dimer. In the case of methyl(phenyl)disilacyclane, the structural isomers were separated andtrans-1,4-dimethyl-1,4-diphenyl-1,4-disilacyclohexane was isolated. The reaction of this product with HCl in the presence of AlCl₃ followed by hydrolysis resulted in the synthesis oftrans-1,4-dichloro- andtrans-1,4-dihydroxy-1,4-dimethyl-1,4-disilacyclohexanes. The structures of the structural and stereoisomers synthesized were confirmed by¹H,¹³C, and²⁹Si NMR and IR spectroscopies and mass spectrometry. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1734–1738, September, 1999.     

Polychloroprene. I. Etude de la microstructure par RMN 1H

The microstructure of polychloroprenes was studied by ¹H-NMR at high field (350 MHz). An examination with two solvents, CDCl₃ and C₆D₆, was necessary to show all the addition modes. The complementary information obtained made possible the quantitative determination of head-to-tail, head-to-head, tail-to-tail, trans-1–4, and cis-1–4, 1–2, and 3–4 additions.     

Fourier transform NMR investigations of organotin compounds : VIII. Propenyl- and isopropenyl-tin compounds; detection and identification of isomers using 119Sn and 13c NMR

Starting from the equilibrium mixture of cis- and trans-1-bromo-1-propene, isomeric mixtures of compounds Me_n Sn(CH=GHMe)_4-n (n = 0–3) have been prepared and studied. While proton NMR only allows distinction between the methyltin signals of the various isomers (except where n = 3), the ¹³C spectra show separate signals for almost all isomeric carbons even when n = 0. In the ¹¹⁹Sn spectra the signals due to the various isomers are separated by ca. 20 ppm for a given value of n; the peak areas can be used to estimate the proportions of cis- and trans-propenyl residues present in the mixtures. Addition of 2-bromo-propene to the starting 1-bromo-1-propenes leads to the formation of further isomers, which can in all cases be observed and identified in the ¹¹⁹Sn spectra; ¹¹⁹Sn shifts can be calculated using the shifts for the Me₃SnC₃H₅ isomers as increments.     

A kinetic study of the chemistry of the SO2 (3B1) reactions with cis- and trans-2-butene

The chemical reactions of SO₂(³B₁) molecules with cis- and trans-2-butene have been studied in gaseous mixtures at 25°C by excitation of SO₂ within the SO₂(³B₁) → SO₂(+, ¹A₁) ‘forbidden’ band using 3500–4100-Å light. The initial quatum yields of olefin isomerization were determined as a function of the [SO₂]/[2-butene] ratio and added gases, He and O₂. The kinetic treatment of these data suggests that there is formed in the SO₂(³B₁) quenching step with either cis- or trans-2-butene, some common intermediate, probably a triplet addition complex between SO- and olefin. It decomposes very rapidly to form the 2-butene isomers in the ratio [trans-2-butene]/[cis-2-butene] = 1.8. In another series of experiments SO₂ was excited using a 3630 ± 1-Å laser pulse of short duration, and the SO₂(³B₁) quenching rate constants with the 2-butenes were determined from the SO₂(³B₁) lifetime measurements. The rate constants at 21°C are (1.29 ± 0.18) × 10¹¹ and (1.22 ± 0.15) × 10¹¹ l/mole·sec with cis-2-butene and trans-2-butene, respectively, as the quencher molecule. Within the experimental error these quenching constants equal those derived from the quantum yield data. Thus the rate-determining step in the isomerization reaction is suggested to be the quenching reaction, presumably the formation of the triplet SO₂-2-butene addition complex. In a third series of experiments using light scattering measurements, it was found that the aerosol formation probably originates largely from SO₃ and H₂SO₄ mist formed following the reaction SO₂(³B₁) + SO₂ → SO₃ + SO(³Σ^?). Aerosol formation from photochemically excited SO₂-olefin interaction is probably unimportant in these systems and must be unimportant in the atmosphere.     

Etude structurale du poly (pentadiene-1,3) par RMN du proton a 100 ET 220 MHz

High-resolution proton NMR spectra of C₆D₆ solutions of samples of poly(1,3-pentadiene) having different structures and different stereoregularities are presented and interpreted. Methylene resonances of isotactic and syndiotactic cis-1,4-polypentadienes measured at 220 MHz exhibit three-peak and eight-peak patterns, respectively, indicating that the methylene protons are non-equivalent in the syndiotactic polymer. Methyl groups of cis-1,4 units are about 0.02 ppm more shielded than those of trans-1,4 units. Spectra of trans-1,2-polypentadiene and spectra of polypentadiene prepared with lithiumnaphthalene in tetrahydrofuran are also interpreted.     

Sign Reversal of a Large Circularly Polarized Luminescence Signal by the Twisting Motion of a Bidentate Ligand

This work demonstrates sign reversal of large circularly polarized luminescence (CPL) signal based on the hinge‐like twisting motion of a bidentate ligand, 3,3‐bis(diphenylphosphoryl)‐2,2‐bipyridine (BIPYPO), in a cis–trans isomerization of chiral europium(III) complexes. X‐ray diffraction analysis revealed that twisting motion of BIPYPO provides s‐cis and s‐trans geometries of a chiral Eu^III complex containing either tris[3‐(trifluoromethylhydroxymethylene)‐(+)‐camphorate] (D ‐ 1 ) or tris[3‐(heptafluoropropylhydroxymethylene)‐(+)‐camphorate] (D ‐ 2 ). The s‐cis Eu^III complexes show eight‐coordinate geometry around the Eu^III ion, in which the chelate between the phosphoryl oxygen and the Eu^III ion forces the s‐cis geometry of BIPYPO. In contrast, the phosphorus–nitrogen interaction provides a conformational lock for the s‐trans geometry of the BIPYPO ligand, inducing a quasi‐seven‐coordinate Eu^III complex. The difference in coordination geometry causes the sign change of the CPL signals between the s‐cis and s‐trans isomers, whereby the s‐cis and s‐trans isomers of Eu^III complexes exhibit the positive and negative CPL signals, respectively, for the ⁵D₀→⁷F₁ transition. The proportion of the s‐trans‐D ‐ 1 against s‐cis‐D ‐ 1 increases upon changing the solvent from [D₃]acetonitrile to [D₆]acetone, inducing a sign change of the CPL signals. The complexes D ‐ 1 and D ‐ 2 show a biexponential decay with two different lifetimes, suggesting two emitting species, that is, the s‐cis and s‐trans isomers of Eu^III complexes. In both cases, the proportions of the longer lifetime components (τ₁) decrease and instead the shorter lifetime components (τ₂) increase upon changing the solvent from [D₃]acetonitrile to [D₆]acetone.     

Multinuclear two-dimensional NMR: Assignments of natural abundance polypeptide 13C, 1H and 15N chemical shifts and demonstration of isomer interconversion

The polypeptide carbobenzoxy-glycyl-L -prolyl-L -leucyl-L -alanyl-L -proline (0.2 M in DMSO-d₆) was investigated using ¹³C, ¹H and ¹⁵N NMR in natural abundance at 4.7 tesla. The existence of cis–trans-Gly-Pro and -Ala-Pro bonds permits up to four isomers, and all four were observed (in a 60:30:7:3 ratio). ¹³C shifts of the proline β-CH₂ resonances are consistent only with the 60% form being trans–trans. The 30% form is either trans–cis or cis–trans (order as above) and was tentatively assigned as cis-trans on the basis of relaxation behavior. Refocused INEPT studies aided the ¹³C assignments. The ¹⁵N data were obtained using both NOE and INEPT excitation, with signals evident for the three major isomers. The spectra were analysed by starting from the ¹³C data, which were assigned based on known regularities in peptide spectra. A ¹³C? ¹H heteronuclear two-dimensional chemical shift correlation experiment allowed direct assignment of proton shifts for major and minor isomers. The NH proton shifts were assigned by running a homonuclear two-dimensional chemical shift correlation experiment and noting the correlation with the previously assigned α-CH protons. The ¹⁵N resonances were then assigned from a ¹⁵N? ¹H heteronuclear two-dimensional chemical shift correlation experiment, relating the ¹⁵N signals directly to the NH proton resonances. Isomer interconversion between the two major isomers was demonstrated by performing a magnetization transfer homonuclear 2D experiment. Off-diagonal intensity was noted relating the major and minor isomer alanine NH proton, as well as for the major and minor isomer leucine NH protons.     

13C NMR spectroscopic study of epoxidized 1,4-polyisoprene and 1,4-polybutadiene

Partly epoxidized cis- and trans-1,4-polyisoprenes and cis-and trans-1,4-polybutadienes were prepared, and their ¹³C NMR spectra examined. All the prominent resonances in the spectra of the epoxidized polymers were assigned by using lanthanide shift reagent and off-resonance decoupling experiments. A ¹³C NMR method of quantitative assessment of the epoxide content was developed following determination of relative spin-lattice relaxation time (T₁) and nuclear Overhauser effect (NOE) parameters of the various carbons in the epoxidized polyisoprenes and polybutadienes.     

Isolation by HPLC. and Identification by NMR. Spectroscopy of 11 mono-, di- and tri-cis isomers of an aromatic analogue of retinoic acid,ethyl all-trans-9-(4-methoxy-2,3,6-trimethylphenyl)-3,7-dimethyl-nona-2,4,6, 8-tetraenoate

Photoisomerization of an aromatic analogue of retinoic acid, ethyl all-trans-9-(4-methoxy-2,3,6-trimethylphenyl)-3,7-dimethyl-nona-2,4,6, 8-tetraenoate 1 in dilute solutions of hexane, benzene, and ethanol yielded multi-component mixtures of cis isomers which were separated by HPLC. FT-¹H-NMR. at 270 MHz and, in some cases, homonuclear decoupling and Overhauser experiments as well as ¹³C-NMR. were applied to establish the structures of 4 mono-cis, 4 (of 6 possible) di-cis, and 3 (of 4 possible) tri-cis isomers. The structures of 3 isomeric esters, namely (2Z, 4E, 6E, 8E) 6 , (2Z, 4Z, 6E, 8E) 9 , and (2Z, 4Z, 6Z, 8E) 7 were independently confirmed by direct syntheses. The ¹H-NMR. data of all these compounds and the ¹³C-NMR. data of the all-trans and of 6 cis isomers available in sufficiently large quantities are discussed.     

Thermal isomerization of ruthenium hydride compounds containing asymmetric bidentate pyrrole‐imine ligands

A series of ruthenium hydride compounds containing substituted bidentate pyrrole‐imine ligands were synthesized and characterized. Reacting RuHCl(CO)(PPh₃)₃ with one equivalent of [C₄H₃NH(2‐CH=NR)] in ethanol in the presence of KOH gave compounds {RuH(CO)(PPh₃)₂[C₄H₃N(2‐CH=NR)]} where trans‐Py‐Ru‐H 1, R = CH₂CH₂C₆H₉; cis‐Py‐Ru‐H 2, R = Ph‐2‐Me; and cis‐Py‐Ru‐H 3, R = C₆H₁₁. Heating trans‐Py‐Ru‐H 1 in toluene at 70°C for 12 hr resulted a thermal conversion of the trans‐Py‐Ru‐H 1 into its cis form, {RuH(CO)(PPh₃)₂[C₄H₃N(2‐CH=NCH₂CH₂C₆H₉)]} (cis‐Py‐Ru‐H 1) in very high yield. The ¹H NMR spectra of trans‐Py‐Ru‐H 1, cis‐Py‐Ru‐H 2, cis‐Py‐Ru‐H 3, and cis‐Py‐Ru‐H 1 all show a typical triplet at ca. δ–11 for the hydride. The trans and cis form indicate the relative positions of pyrrole ring and hydride. The geometries of trans‐Py‐Ru‐H 1, cis‐Py‐Ru‐H 1, and cis‐Py‐Ru‐H 3 are relatively similar showing typical octahedral geometries with two PPh₃ fragments arranged in trans positions.     

Synthesis and characterization of polymers of 1,4-hexadienes

The homopolymerization of trans-1,4-hexadiene, cis-1,4-hexadiene, and 5-methyl-1,4-hexadiene was investigated with a variety of catalysts. During polymerization, 1,4-hexadienes undergo concurrent isomerization reactions. The nature and extent of isomerization products are influenced by the monomer structure and polymerization conditions. Nuclear magnetic resonance (NMR) and infrared (IR) data show that poly(trans-1,4-hexadiene) and poly(cis-1,4-hexadiene) prepared with a Et₃Al/α-TiCl₃/hexamethylphosphoric triamide catalyst system consist mainly of 1,2-polymerization units arranged in a regular head-to-tail sequence. A 300-MHz proton NMR spectrum shows that the trans-hexadiene polymer is isotactic; it also may be the case for the cis-hexadiene polymer. These polymers are the first examples of uncrosslinked ozone-resistant rubbers containing pendant unsaturation on alternating carbon atoms of the saturated carbon-carbon backbone. Polymerization of the 1,4-hexadienes was also studied with VOCl₃- and β-TiCl₃-based catalysts. Microstructures of the resulting polymers are quite complicated due to significant loss of unsaturation, in contrast to those obtained with the α-TiCl₃-based catalyst. In agreement with the literature, there was no discernible monomer isomerization with the VOCl₃ catalyst system.     

Polymérisation radicalaire du pentadiène-1,3. II. Microstructure des résidus pentadiéniques dans les homo- et copolymères des cis et trans pentadiènes-1,3 avec l'acrylonitrile

The microstructure of diene units was investigated in radical homopolymers of the cis and trans isomers of 1,3-pentadiene and copolymers with acrylonitrile, synthetized in bulk and emulsion. Experiments were carried out by infrared spectroscopy, 100 MHz ¹H-NMR, and 25 MHz ¹³C-NMR studies. No difference between the bulk and emulsion samples was noted. The microstructure of poly(1,3-pentadiene) is practically independent of the cis or trans configuration of the diene monomer and is as follows: 56–59% trans-1,4, 15–17% cis-1,4, 16–20% trans-1,2 7–10% cis-1,2 and 0% 3,4. On the other hand, up to about 30% of incorporated acrylonitrile (10% in the feed), the microstructure of the pentadiene fraction in the copolymers is not affected. This finding suggests that the penultimate unit has very little influence on the polymerization process involving the terminal pentadienly unit. Beyond 10% of acrylonitrile in the feed, the proportions of the structural units were linearly dependent upon the acrylonitrile content: trans-1,4 content increased whereas the amounts of cis-1,4 trans-1,2 and cis-1,2 decreased (except the cis-1,2 fraction, constant in the copolymers from the cis-diene). These results are discussed on the assumption that the microstructure of pentadiene residues is strongly associated with the acrylonitrile comonomer in the feed.     

Reaction of atomic oxygen with cyclopentadiene

The reaction of 1,3-cyclopentadiene (CPD) with ground-state atomic oxygen O(³P), produced by mercury photosensitized decomposition of nitrous oxide, was studied. The identified products were carbon monoxide and the following C₄H₆ isomers: 3-methylcyclopropene, 1,3-butadiene, 1,2-butadiene, and 1-butyne. The yield of carbon monoxide over oxygen atoms produced (?_CO) was equal to the sum of the yields of C₄H₆ isomers in any experiment. ?_CO was 0.43 at the total pressure of 6.5 torr and 0.20 at 500 torr. We did not succeed in detecting any addition products such as C₅H₆O isomers. It was found that 3-methylcyclopropene was produced with excess energy and was partly isomerized to other C₄H₆ isomers, especially to 1-butyne. The excess energy was estimated to be about 50 kcal/mol. The rate coefficient of the reaction was obtained relative to those for the reactions of atomic oxygen with trans-2-butene and 1-butene. The ratios k_CPD+O/k_{trans-2-butene+O}= 2.34 and k_CPD+O/k_1-butene+O = 11.3 were obtained. Probable reaction mechanisms and intermediates are suggested.     

Metal-Organic Frameworks for Breakthrough Separation of 2-Butene Isomers with High Dynamic Selectivity and Capacity

Developing porous sorbents represents a potential energy-efficient way for industrial gas separation. However, a bottleneck for reducing the energy penalty is the trade-off between dynamic adsorption capacity and selectivity. Herein, we showed this problem can be overcome by modulating the kinetic and thermodynamic separation behaviours in metal–organic frameworks for sieving 2-butene geometric isomers, which are desired for upgrading the raffinates to higher value-added end products. We found that the iron-triazolate framework can realize the selective shape screening of 2-butene isomers assisted by electrostatic interactions at the pore apertures. Further introducing uncoordinated N binding sites by ligand substitution lowered the gas diffusion barrier and greatly boosted the dynamic separation performance. In breakthrough tests under ambient conditions, trans-2-C₄H₈ can be efficiently separated from cis-2-C₄H₈ with a record capacity of 2.10 mmol g⁻¹ with high dynamic selectivity of 2.39.     

Methylene radical reaction with cis-butene-2

A study of the pressure dependence of the C₅ products from the reaction of cis-butene-2 and methylene is reported. Methylene was produced by the photolysis of diazomethane with 4358 Å light at 23° or 56°, and by photolysis of ketene with 3200 Å radiation at 23° or 100°. The change with increasing pressure of the relative amounts of the characteristically “triplet products” (trans-1,2-dimethylcyclopropane, trans-pentene-2 (TP2), and 3-methylbutene-1 (3MB1)) and “singlet products” (cis-1,2-dimethylcyclopropane (CDMC) and cis-pentene-2 (CP2)) are discussed. The behavior is reminiscent of that found in ³CH₂-cis-butene-2 systems and can be interpreted in terms of the rapid rate of rearrangement of an initial triplet diradical product component, due to ³CH₂, relative to the slower rate and readier collisional stabilization of an initial vibrationally-excited dimethyl cyclopropane product component, due to ¹CH₂. Relative rates of reactions of ¹CH₂ with allylic CH:vinyl CH:C?C in the neat liquid were, for diazomethane, 1:1.1:7.2 and, for ketene, 1:1.2:6.7.     

Cyclic oligomers in the cationic polymerization of cis- and trans-2,3-dimethylthiirane

Under the influence of triethyloxonium tetrafluoroborate in methylene chloride, cis- and trans-2,3-dimethylthiirane are transformed to their corresponding polymers almost instantaneously (at temperatures between 0 and 20 °) but within a few hours these polymers completely degrade to form a mixture of low molecular weight substances. The cis-monomer leads to a mixture of cyclic tetramer, cis-butene and two geometric isomers of 3,4,6,7-tetramethyl-1,2,5-trithiepane. By ¹H-NMR it was shown that these two isomers are the trans-cis-trans and the trans-trans-trans forms. The trans-monomer leads to a mixture of trans-butene and 3,4,6,7-tetramethyl-1,2,5-trithiepane which is present as a mixture of the cis-cis-cis and the cis-trans-cis isomers. In both cases, the butene and the trithiepanes were formed in equimolar quantities. The formation of these oligomers is explained by assuming that polymerization occurs via an SN2 propagation reaction between the three-membered cyclic sulphonium ion (the active species) and monomer, followed by a degradation reaction occurring via a back-biting mechanism.     

Niederdruck-Oligomerisation von Mono-Olefinen mit löslichen Nickel/Aluminium-Bimetallkatalysatoren Teil III. Reaktionskinetische Untersuchungen über die Dimerisation und Trimerisation des Áthylens

The kinetics of the di- and trimerization of ethylen in organic solvents under the influence of a homogeneous catalyst containing π-tetramethylcyclobutadiene-nickeldichloride and a prereacted mixture of ethylaluminiumdichloride and tri-n-butylphosphine are reported. The primary reaction product is 1-butene, which is isomerized to 2-butene (cis/trans) during the reaction. The C₆-Olefins are formed by the reaction of ethylene with 1-butene and with the 2-butenes. The following primary reaction products are obtained: 3-hexene (cis/trans), 1-hexene, 2-ethyl-1-butene, 3-methyl-1-pentene and 3-methyl-2-pentene (cis/trans). The effect of other phosphines on the reaction was also studied. The relative composition of the reaction product is strongly dependent upon the amount and the LEWIS base strength of the phosphine present. The results are in accordance with a coordinative mechanism on nickel.     

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) and its model compounds

High-resolution proton magnetic resonance and infrared spectra of poly(vinyl formal) were studied in comparison with those of the model formals obtained from stereoisomers of pentane-2,4-diol and heptane-2,4,6-triol in order to learn spectral changes due to differences of the steric structures of the polymer. In the NMR spectrum of transformal obtained from dl diol or dl,dl (syndiotactic) triol, all proton signals were well interpreted by assuming a rapid chair-chair inversion of the formal ring. On the other hand, no such inversion was observed spectroscopically in cis-formal obtained from the meso diol or meso,meso (isotactic) triol, and the cis-formal ring was supposed to take a diequatorial form preferentially. Consequently, dioxymethylene protons gave a single peak (equivalent) in trans-formal and an AB quartet (nonequivalent) in cis-formal. In the spectra of poly(vinyl formal), the dioxymethylene signal was an overlap of the singlet and quartet in dimethylsulfoxide solution. Observations of the spectra of various poly(vinyl formals) obtained from poly(vinyl alcohols) of different tacticities and study of temperature dependence of the signal have shown that the singlet and quartet are attributed to trans- and cis- formals, respectively, in the polymer spectrum also. In the infrared spectra of poly(vinyl formals), the 800 and 785 cm^-1 bands were found to be related to cis- and trans-formal rings respectively. A linear relationship was confirmed between D₇₈₅/D₈₀₀ and trans/cis ratios determined from the peak intensities of the dioxymethylene proton signals.