Degradation of polymer mixtures. IV. Blends of poly(vinyl acetate) with poly(vinyl chloride) and other chlorine-containing polymers

The degradation of the binary polymer blends, poly(vinyl acetate)/poly(vinyl chloride), poly(vinyl acetate)/poly(vinylidene chloride) and poly(vinyl acetate)/polychloroprene has been studied by using thermal volatilization analysis, thermogravimetry, evolved gas analysis for hydrogen chloride and acetic acid, and spectroscopic methods. For the first two systems named, strong interaction occurs in the degrading blend, but the polychloroprene blends showed no indication of interaction. In the PVA/PVC and PVA/PVDC blends, hydrogen chloride from the chlorinated polymer causes substantial acceleration in the deacetylation of PVA. Acetic acid from PVA destabilizes PVC but has little effect in the case of PVDC because of the widely differing degradation temperatures of PVA and PVDC. The presence of hydrogen chloride during the degradation of PVA results in the formation of longer conjugated sequences, and the regression in sequence length at high extents of deacetylation found for PVA degraded alone is not observed.     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.     

Enhanced thermal stability of poly(vinyl alcohol) in presence of melanin

A novel method was developed to enhance the thermal stability of PVA by using natural and synthetic melanins from oxidation of dopamine. Thermogravimetric (TG) curves indicated that the synthetic melanin changed the thermal degradation behaviors of PVA and largely improved the decomposed temperature by 80–110 °C in nitrogen when incorporation of synthetic melanin with low content (0.5–2 mass%). The thermal degradation kinetics suggested the activation energies of PVA/synthetic melanin blends were much higher than these of pure PVA. Isothermal TG curves conformed that the PVA/synthetic melanin blends exhibited more thermal stability than pure PVA. Moreover, the chemical structure changes of macromolecular after degradation were characterized by using fourier transform infrared and the results suggested that elimination reaction on the first degradation step did not took place for the PVA/synthetic melanin blends at 270 °C.     

Thermal oxidation of blends of poly(ethylene oxide) and poly(methyl methacrylate)

Thermal oxidation of poly(ethylene oxide) (PEO) and its blends with poly(methyl methacrylate) (PMMA) were studied using oxygen uptake measurements. The rates of oxidation and maximum oxygen uptake contents were reduced as the content of PMMA was increased in the blends. The results were indicative of a stabilizing effect by PMMA on the oxidation of PEO. The oxidation reaction at 140°C was stopped at various stages and PMMA was separated from PEO and its molecular weights were measured by gel permeation chromatography (GPC). The decrease in the number-average molecular weight of PMMA was larger as the content of PEO increased in the blends. The visual appearance of the films suggested that phase separation did not occur after thermal oxidation. The activation energy for the rates of oxidation in the blends was slightly increased compared to pure PEO. © 1992 John Wiley & Sons, Inc.     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Pervaporation separation of water-acetic acid mixtures through poly(vinyl alcohol) membranes crosslinked with glutaraldehyde

Poly(vinyl alcohol) (PVA) membranes crosslinked with glutaraldehyde (GA) were prepared by a solution method for the pervaporation separation of acetic acid-water mixtures. In the solution method, dry PVA films were crosslinked by immersion for 2 days at 40°C in reaction solutions which contained different contents of GA, acetone and a catalyst, HCl. In order to fabricate the crosslinked PVA membranes which were stable in aqueous solutions, acetone was used as reaction medium in stead of aqueous inorganic salt solutions which have been commonly used in reaction solution for PVA crosslinking reaction. The crosslinking reaction between the hydroxyl group of PVA and the aldehyde group of GA was characterized by IR spectroscopy. Swelling measurements were carried out in both water and acetic acid to investigate the swelling behavior of the membranes. The swelling behaviour of a membrane fabricated at different GA content in a reaction solution was dependent on crosslinking density and chemical functional groups created as a result of the reaction between PVA and GA, such as the acetal group, ether linkage and unreacted pendent aldehydes in PVA. The pervaporation separation of acetic acid-water mixtures was performed over a range of 70–90 wt% acetic acid in the feed at temperatures varying from 35 to 50°C to examine the separation performances of the PVA membranes. Permeation behaviour through the membranes was analyzed by using pervaporation activation energies which had been calculated from the Arrhenius plots of permeation rates.     

The thermal degradation of polychloroprene-III degradation of polychloroprene/poly(methyl methacrylate) mixtures

The mechanism of dehydrochlorination has been studied by examining the degradation of polychloroprene/poly(methyl methacrylate) blends, using thermal volatilization analysis and infrared spectroscopy; the behaviour has been compared with that previously found for PVC/PMMA blends. Unlike the latter system, the polychloroprene blends did not show any increased production of methyl methacrylate monomer in the early stages of breakdown. The stabilization effect on PMMA due to reaction of ester groups with hydrogen chloride, on the other hand, is much more evident in the case of polychloroprene blends than for PVC, PVC dehydrochlorination is retarded by the presence of PMMA, but evolution of hydrogen chloride from polychloroprene is unaffected to any significant extent. It is concluded that the dehydrochlorination of polychloroprene is not a radical chain process. A unimolecular mechanism is suggested.     

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with poly(butadiene-block-methyl methacrylate)

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with butadiene-methyl methacrylate diblock copolymers has been investigated by transmission electron microscopy. When the diblock copolymers are added to the blends, the size of PB particles decreases and their size distribution gets narrower. In PB/PMMA7.6K blends with P(B-b-MMA)25.2K as a compatibilizer, most of micelles exist in the PMMA phase. However, using P(B-b-MMA)38K as a compatibilizer, the micellar aggregation exists in PB particles besides that existing in the PMMA phase. The core of a micelle in the PMMA phase is about 10 nm. In this article the influences of temperature and homo-PMMA molecular weight on compatibilization were also examined. At a high temperature PB particles in blends tend to agglomerate into bigger particles. When the molecular weight of PMMA is close to that of the corresponding block of the copolymer, the best compatibilization result would be achieved. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 85–93, 1998     

Thermal degradation of poly(vinyl bromide), vinyl bromide-methyl methacrylate copolymers,and poly(vinyl bromide)-poly(methyl methacrylate) blends

Degradation behavior has been compared for PVB, five VB-MMA copolymers which span the composition range, PMMA, and PVC by using thermogravimetry in dynamic nitrogen and thermal volatilization analysis (TVA) under vacuum for programmed heating at 10°C/min. Volatile products have been separated by subambient TVA and identified. PVB is substantially less stable than PVC but shows inmost respects analogous degradation behavior. The introduction of VB into the PMMA chain leads to intramolecular lactonization with release of methyl bromide at temperatures a little above 100°C; after this reaction is complete, however, the polymer is more stable toward volatilization than PMMA. Copolymers with moderate and high VB contents also lose hydrogen bromide. Carbon dioxide is a significant product at intermediate compositions. The variation of product distribution with copolymer composition is discussed in relation to the several reactions involved and comparisons are made with VC-MMA copolymers. PVB-PMMA blends snow some features of degradation behavior in common with the PVC-PMMA system but also very important differences. The effect of PVB is only to stabilize the PMMA; the mechanism is discussed. The role of PVB as an additive and VB as a comonomer for fire-retardant PMMA compositions is briefly considered in relation to earlier studies.     

Blends of poly(carbonate) with poly(styrene) and poly(methylmethacrylate): phase morphology,mechanical, and thermal properties

This paper is concerned with the dependence of mechanical and thermal properties of heterogeneous blends of poly(carbonate) (PC) with poly(methyl-methacrylate) (PMMA) and with poly(styrene) (PS) on the concentration of the components. PS displays a very weak phase coupling in blends with PC, whereas PMMA is characterized by a strong coupling to PC. Experimental results as well as predictions based on composite theories are reported. The general finding is that mechanical properties, such as the tensile modulus and the dynamic shear modulus, as well as thermal properties, such as thermal expansion, are (i) only weakly affected by the occurrence of a phase inversion and of a continuous phase morphology, (ii) vary continuously with the concentration of the components, and (iii) are rather insensitive to the strength of the phase coupling. The theoretical predictions on the concentration—property relationship for these properties, based on a self-consistent approach, agree very well with those observed experimentally. The elongation at break as well as the yield stress, on the other hand, are strongly influenced by the nature of the phase coupling: a discontinuous variation of these properties with the composition is observed for PS/PC blends but not for PMMA/PC blends. The general conclusion is that a set of mechanical and thermal properties of heterogeneous blends can satisfactorily be predicted on the basis of rather simple composite theories.     

Enzymatic biodegradation of chemosynthetic atactic P(3HB) enhanced by an amorphous non‐biodegradable polymer: blend of atactic P(3HB) with PMMA

Communication: The phase structure and biodegradability were investigated for a blend of chemosynthetic atactic poly((R,S)‐3‐hydroxybutyrate), a‐P(3HB), and poly(methyl methacrylate), PMMA. The thermal analysis indicated that amorphous a‐P(3HB)/PMMA blends with 20 wt.‐% and 40 wt.‐% PMMA shows sophisticated phase behavior and is partially miscible. The depolymerase of natural poly((R)‐3‐hydroxybutyrate) purified from Alcaligenes faecalis T1 did not degrade chemosynthesized a‐P(3HB) at all in the pure state, but it degraded a‐P(3HB) in some a‐P(3HB)/PMMA blends. The results suggested that enzymatic degradation of a‐P(3HB) can be enhanced by an amorphous non‐biodegradable polymer.     

Thermal and photochemical stability of poly(methyl methacrylate) and its blends with poly(vinyl acetate)

An investigation of the thermal stability of poly(methyl methacrylate) (PMMA) blends with poly(vinyl acetate) (PVAc) revealed that PVAc acts as a stabilizer as concerns thermal and photochemical degradation when the processes take place in air. The temperatures of decomposition of these blends are higher than that of pure PMMA. The efficiency of photodegradation and photooxidation in the blends is lower than that of pure PMMA.     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Thermal degradation of mixtures of poly(methyl methacrylate) and silver acetate

The degradation behavior of silver acetate—PMMA blends at salt/polymer ratios of 1:1, 1:5, and 1:10 has been studied by using thermal volatilization analysis (TVA) as the principal technique. Degradation of the salt has also been examined; it gives a variety of products best explained by a series of reactions resulting from an initial cleavage of CH₃COO. radicals and silver atoms. Silver acetate, when present with PMMA during degradation, results in a severe destabilization of the polymer, which breaks down to monomer at a high rate at temperatures as low as 200°C. This effect is explained by diffusion of radicals from silver acetate decomposition into the polymer phase, in which they initiate chain scission and depolymerization.     

Blends of polyvinylalcohol with collagen hydrolysate: thermal degradation and processing properties

The blends of polyvinylalcohol with collagen hydrolysate were studied from the point of view of the effect of collagen hydrolysate on thermal degradation and processing properties. Elimination of deliberated acetic acid in reaction with NH₂ groups of CH can protect PVA against acidic catalysis of degradation. Using talc instead of silica can eliminate the crossliking effect in PVA‐CH‐silica blend when silica is used as antiblock agent. The obtained results make possible to use PVA/CH blends for blowing of biodegradable films with CH content up to 30 wt.%.     

Structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SA) blend films

The structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SF) blend films were analyzed by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, x-ray diffractometry, and scanning (SEM) and transmission (TEM) electron microscopy. DSC curves of PVA/SF blend films showed a major endothermic peak at 220°C, along with a peak at 280°C. These endotherms were assigned to the thermal decomposition of the ordered PVA elements and to the thermal degradation of silk fibroin, respectively. The PVA/SF blends behaved in a manner intermediate to the pure components, as suggested by both contraction expansion and sample weight retention properties recorded by TMA and TGA measurements. The IR absorption spectra of the blends were identified as purely a composite of the absorption bands characteristic of both PVA and SF pure polymers. The X-ray diffraction patterns of PVA/SF blends showed overlapping spacing due to PVA and SF. A dispersed phase formed by spherical particles of 3–7 μm diameter was observed by SEM and TEM. All these findings suggest that PVA and SF are incompatible. © 1994 John Wiley & Sons, Inc.     

The effect of zinc bromide on the thermal degradation of poly(methyl methacrylate): Part 1—Thermal analysis studies and general nature of the interaction

The degradation behaviour of several different blends of poly(methyl methacrylate) (PMMA) and zinc bromide, under programmed heating to 500°C, has been studied using thermal volatilisation analysis and spectroscopic investigation of the volatile degradation products. The samples were in the form of films cast from a common solution of the components in acetone; these films are found to be transparent, indicating compatibility of PMMA and ZnBr₂. From studies of the visible spectra of cobalt bromide, PMMA and blends of PMMA with CoBr₂, it has been argued that complex formation occurs between the polymer and the transition metal halides: structures are suggested.When degraded alone, PMMA gives only monomer as the degradation product. In the blends with ZnBr₂ (or with CoBr₂), the polymer becomes considerably less stable and the pattern of degradation becomes very complex, with a range of volatile products, of which methyl bromide, carbon dioxide and methanol are the major constituents; carbon monoxide and methane are also formed. It is proposed that complex formation facilitates the release of methyl bromide as the first stage of breakdown, with the formation of zinc methacrylate units in the polymer chain; depolymerisation is prevented or severely inhibited, depending on the amount of ZnBr₂ present.     

Uniaxial drawing of poly(ethyleneoxide)/poly(methyl methacrylate) blends by solid-state extrusion

Ultradrawn ribbons of solution-cast blends of poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA) have been prepared by a solid-state coextrusion in a capillary rheometer. An increase of noncrystallizable PMMA in the blends drastically decreased the drawability from a draw ratio of 36 for pure PEO to 5 for a mixture of PEO/PMMA 40/60% by weight. A low crystallinity and depression of melting temperature for PEO were observed with increasing draw. The Flory-Huggins theory for melting temperature depression has been used to derive the binary interaction parameter for these blends.     

Compatibilizing effect of a graft copolymer on bacterial poly(3‐hydroxybutyrate)/poly(methyl methacrylate) blends

Blends of isotactic (natural) poly(3‐hydroxybutyrate) (PHB) and poly(methyl methacrylate) (PMMA) are partially miscible, and PHB in excess of 20 wt % segregates as a partially crystalline pure phase. Copolymers containing atactic PHB chains grafted onto a PMMA backbone are used to compatibilize phase‐separated PHB/PMMA blends. Two poly(methyl methacrylate‐g‐hydroxybutyrate) [P(MMA‐g‐HB)] copolymers with different grafting densities and the same length of the grafted chain have been investigated. The copolymer with higher grafting density, containing 67 mol % hydroxybutyrate units, has a beneficial effect on the mechanical properties of PHB/PMMA blends with 30–50% PHB content, which show a remarkable increase in ductility. The main effect of copolymer addition is the inhibition of PHB crystallization. No compatibilizing effect on PHB/PMMA blends with PHB contents higher than 50% is observed with various amounts of P(MMA‐g‐HB) copolymer. In these blends, the graft copolymer is not able to prevent PHB crystallization, and the ternary PHB/PMMA/P(MMA‐g‐HB) blends remain crystalline and brittle. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1390–1399, 2002     

Degradation of polymer mixtures. VII. Blends of poly(vinyl acetate) with polystyrene

The degradation of films containing both PVA and PS has been investigated for comparison with the behavior already reported for PVC/PS blends. The presence of PS had little, if any, effect on the behavior of PVA, but PVA had an effect similar to that of PVC on the degradation of PS. Styrene production was retarded in the blend, compared to PS alone, and an increase in the rate of chain scission was observed for a high molecular weight sample. The molecular weight effect, however, was much smaller than in corresponding experiments with PVC/PS blends. Interference with intermolecular transfer in PS is again advanced as the probable explanation of the stabilization of PS.