Study on radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. II. Radiation-induced polymerization of methyl methacrylate adsorbed on several inorganic substances

The radiation-induced polymerization of methyl methacrylate (MMA) absorbed on such inorganic substances as silica gel, white carbon, silicic acid anhydride, zeolite, and activated alumina was carried out to compare with the case of styrene. The rate of radiation-induced polymerization adsorbed on inorganic substances was high compared with that of radiation-induced bulk state polymerization, as was the case with styrene. Inorganic substrates which contain aluminum as a component element are more likely to be grafted than those which consist of SiO₂ alone, as with styrene. The molecular weight distribution of unextractable polymer and extractable polymer differs, depending on the type of inorganic substance. Experiments by a preirradiation method were carried out in case of silica gel, white carbon, and silicic acid anhydride. GPC spectra of the polymer obtained were different from those of polymer formed by the simultaneous irradiation method. It appears that all the unextractable polymer is grafted to the inorganic surface with chemical bond.     

Study on radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. I. Radiation-induced polymerization of styrene adsorbed on several inorganic substances

The radiation-induced polymerization of styrene adsorbed on silica gel, white carbon, silicic acid anhydride, zeolite, and activated alumina was carried out to elucidate the effect of properties of inorganic substances on the polymerization. The rate of adsorbed state polymerization on these inorganic substances was very fast in comparison with that of bulk-state polymerization. The amount of unextractable polymer depends on the specific surface area and chemical compositions of these inorganic substances. Inorganic substances which contain aluminum as a component element are more likely to be grafted than those which consist of SiO₂ alone. The molecular weight and molecular weight distribution of unextractable polymer and extractable polymer differ from one another in each inorganic substance. In case of silicic acid anhydride, unextractable polymer has smaller molecular weight than extractable polymer. These results suggest that unextractable polymer cannot be extracted due to chemical bonds with the inorganic surface.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. III. Effect of p-benzoquinone and ammonia on radiation-induced polymerization of styrene adsorbed on silica gel

In order to elucidate the mechanism of radiation-induced polymerization of styrene adsorbed on silica gel, the effect of p-benzoquinone and ammonia was investigated. The high molecular weight GPC peaks of both graft polymers and homopolymers decreased with increasing p-benzoquinone concentration, while the low molecular weight peaks of both graft copolymers and homopolymers decreased with increasing ammonia concentration. The results indicate that the high molecular weight peaks of both graft and homopolymers are formed as a result of a radical mechanism and that the low molecular weight peaks of both types of polymers are formed by a cationic mechanism. In formation of both graft polymers and homopolymers both radical and cationic polymerization take place at the same time.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. IX. Preirradiation polymerization of styrene–silica gel system

Preirradiation polymerization of the styrene–silica gel system was studied in detail. Both graft polymers and homopolymers have bimodal GPC spectra. High molecular weight peaks were formed in a radical mechanism and the low molecular weight peaks were formed in a cationic mechanism as same as those in the simultaneous irradiation polymerization. The rate of formation of the low molecular weight peaks was very high compared with that of the high molecular weight peaks. Monomer conversion and percent grafting leveled off at about 1–2 Mrad. Radiation dose dependence of the four peaks were different from each other. Monomer conversion and percent grafting decreased as the preheating temperature of silica gel increased. The amount of the low molecular weight peaks of graft polymers depended on the number of silanol groups, as in the case of the simultaneous irradiation polymerization. A reaction mechanism for the preirradiation polymerization is proposed based on the results obtained.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. V. Effects of p-benzoquinone and dose rate on methyl methacrylate–silica gel system

In order to elucidate the mechanism of radiation-induced polymerization of methyl methacrylate adsorbed on silica gel, the effects of p-benzoquinone addition and dose rate were studied in detail. Most of the polymerization is inhibited by p-benzoquinone at levels above 10^-2 mole/l. The GPC spectra of both graft polymers and homopolymers show two peaks. The high molecular weight material appears to have been formed by polymerization by a radical mechanism, because these peaks decrease as p-benzoquinone concentration increases; on the other hand, their low molecular weight polymers seem to be products of an ionic polymerization mechanism because those peaks are almost not affected by p-benzoquinone. The four GPC peaks differ in dose rate dependences of their polymerization rate. The dose-rate exponents of polymerization rate were obtained for the four GPC peaks. The behavior of the low molecular weight peaks of graft polymers and homopolymers were quite different, suggesting that the polymers differ considerably in formation mechanism.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. X. Influence of H2O on the styrene–silica gel system

To elucidate the reaction mechanism of radiation-induced polymerization of the styrene—silica gel system, the influence of H₂O as adsorbed water and inhibitor of cationic polymerization was investigated by two methods. Monomer conversion decreased as H₂O increased. In general, percent grafting decreased as H₂O increased, but the presence of a small amount of H₂O increased the percent grafting. Grafting at 16 Mrad has a maximum value at a water content of about 0.2%. This seems to be due to two effects of H₂O: percent grafting increases due to restraint of cationic polymerization by H₂O, but the percent grafting decreases due to adsorption water which interrupts the contact of styrene with silica gel. In GPC spectra, the low molecular weight peaks of both graft polymers and homopolymers decreased when H₂O was added. The GPC results suggest that the number of positive holes which initiate cationic polymerization is very large.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. IV. Dose rate and temperature dependences in the styrene–silica gel system

In order to elucidate the mechanism of radiation-induced polymerization of styrene adsorbed on silica gel, the effects of dose rate and irradiation temperature were studied in detail. Monomer conversion increased with increasing dose rate and temperature. At the same conversion, the percent grafting increased with decreasing dose rate and also with increasing temperature. In general, GPC spectra of graft polymers and homopolymers showed two peaks; the ratio of the two peaks changed with dose rate and irradiation temperature. The dose-rate exponents of the polymerization rate of four peaks were different from each other. The activation energies of radical polymerization and cationic polymerization were about 2.6 kcal/mole and 0 kcal/mole, respectively. Based on the results obtained, a reaction mechansim is proposed.     

Study of radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VII. Effect of pretreatment temperature of silica gel on styrene–silica gel system

To investigate the reaction mechanism of radiation-induced polymerization of styrene adsorbed on silica gel, the effect of pretreatment temperature of silica gel was studied. Preheating of silica gel was carried out at 200, 500, and 800°C. The number of silanol groups of silica gel surface decreased as preheating temperature increased. The rate of polymerization on the silica gel preheated at 500°C was faster than that at 200°C, but the polymerization rate on the silica gel preheated at 800°C was the lowest. These results suggest that rate of polymerization on the silica gel is affected by the conditions of silica gel surface such as the number of silanol groups and the pore size. At the same monomer conversion, percent grafting decreased as preheating temperature of silica gel increased. The GPC spectra of both graft polymers and homopolymers have two peaks at all preheating temperatures. The monomer conversion of low molecular weight peaks of graft polymers decreased as preheating temperature of silica gel increased. This result suggests that there is a probability that the grafting sites of low molecular weight peaks of graft polymers somehow interact with silanol groups.     

Radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VI. Temperature dependence and effects of additives on methyl methacrylate–silica gel system

To elucidate the reaction mechanism of radiation-induced polymerization of methyl methacrylate adsorbed on silica gel, the temperature dependence and effects of acetone and pyridine were investigated. It was found that even at ?78°C the polymerization rate was quite fast. The amounts of high molecular weight GPC peaks of both graft polymers and homopolymers increased with increasing irradiation temperature. The activation energy of the adsorbed state polymerization was low compared with that of bulk polymerization. The low molecular weight peaks of homopolymers decreased with acetone addition but were almost unaffected by pyridine. The low molecular weight peaks of homopolymers were thus polymerized by an anionic mechanism. In the methyl methacrylate–silica gel system both radical and anionic polymerization take place at the same time in formation of graft polymers and homopolymers. A reaction mechanism for the methyl methacrylate–silica gel system was proposed based on the results obtained to date.     

Polymerization of coordinated monomers. XVII. Alternating copolymerization of methyl methacrylate with styrene by boron compounds

By the use of various boron compounds methyl methacrylate and styrene were copolymerized under photoirradiations at ?20°C. The alternately regulating activities of the boron compounds in the copolymerizations were in the following order: boron trichloride > ethylboron dichloride > boron trifluoride > diethylboron chloride ? triethylboron (?0). Boron trichloride and ethylboron dichloride exhibited such high regulating activities that their presence in 1 mol% in the charged methyl methacrylate was sufficient to complete equimolar alternating copolymerization. The alternating copolymerization proceeded in the steady state. The copolymerization rates decreased in the following order: boron trichloride ? ethylboron dichloride > diethylboron chloride ? triethylboron (?0). The cotacticities of methyl methacrylate-centered triads in the resulting copolymers were identical to those prepared with boron trichloride, ethylboron dichloride, and diethylboron chloride. The mechanism of the alternating copolymerization is discussed.     

Polymerization of coordinated monomers. XV. 13C-NMR study on the alternating copolymers of methyl methacrylate with styrene

By the use of various metal halides methyl methacrylate and styrene were copolymerized to produce equimolar alternating sequences and different cotacticities. The ¹³C-NMR spectra of these copolymers were simple in comparison to those of random copolymers because of the fixed monomer sequence which yielded sharply split triplets for carbonyl, methoxy, and quaternary carbons. The relative intensities in these split peaks varied according to the metal halide used. A comparison of the intensities made it possible to obtain clear-cut and quantitative information on the methyl methacrylate-centered triad cotacticity of the copolymers. The spectral assignment with respect to the methoxy carbon was definitely justified by the combined use of partly relaxed Fourier transform and selective decoupling techniques. The spectrum of aromatic C₁ carbon in styrene units also split into three main peaks. From their relative intensities the splitting was attributed to styrene-centered triad cotacticity. The assignment of this carbon was compared with two other assignments made for random copolymers of methyl methacrylate with styrene; they were contradictory, however. Furthermore, an apparent discrepancy was observed between methyl methacrylate-and styrene-centered tactic triads of these alternating copolymers. The origin of this discrepancy suggests a close relationship with the copolymerization mechanism.     

Vinyl polymerization. 275. Polymerization of vinyl monomers photosensitized by tetramethyltetrazene

A study of the photopolymerization of vinyl monomers in the presence of tetramethyltetrazene (TMT) was made. TMT was found to act as an effective sensitizer. In the photopolymerization of vinyl monomers such as methyl methacrylate or styrene the rate of polymerization was expressed by the equation: R_p = k[TMT]^1/2[monomer]. The chain-transfer constant of TMT under ultraviolet irradiation was estimated to be 3.8 × 10^?2 for the above monomers. A linear correlation was found to exist between the reactivity of dimethylamino radical toward the vinyl monomers and e values for the corresponding monomers.     

Calorimetric investigation of polymerization reactions. I. Diffusion-controlled polymerization of methyl methacrylate and styrene

The rate of bulk polymerization of methyl methacrylate and styrene was determined directly, continuously and over the whole range of conversion with a differential scanning calorimeter (DSC) operated isothermally. At the later stages of the accelerated polymerization of methyl methacrylate, a previously unknown inflection or peak in the rate of polymerization was observed. The variation of the rate after the onset of the gel effect, including this peculiar inflection, was interpreted on the basis of the diffusion behavior of monomer molecules and polymeric radicals in the polymer–monomer system, their diffusion rates being predicted from the free volume theory. The final conversion at which no further polymerization proceeds was determined for both monomers. It was affirmed quantitatively that the final conversion has a close relation with the transition of the polymer–monomer system from a viscous liquid to a glassy state.     

Polymerization of coordinated monomers VII. A kinetic study on the alternating copolymerization of methyl methacrylate with styrene using stannic chloride

The alternating copolymerization of methyl methacrylate with styrene in the presence of stannic chloride at ?50°C in toluene was kinetically investigated both under photoirradiation and with the tri-n-butylboron-benzoyl peroxide initiator. The concentrations of the binary and ternary molecular complexes in the copolymerization solution were estimated by use of the equilibrium constants. The rates are found to be proportional to the 1.5th and 1.0th orders of the concentration of the ternary molecular complex composed of stannic chloride, methyl methacrylate, and styrene, under photoirradiation and with initiator, respectively. The conversion increases proportionally with the polymerization time, while the degree of polymerization is constant irrespective of the time. The rates depend linearly upon the square root of the intensity of the incident light and upon the concentration of tri-n-butylboron, respectively. The alternating copolymerization is confirmed experimentally to precede the homopolymerization of the monomer charged in large excess both under photoirradiation and with initiator. The kinetic results indicate consistently that the alternating copolymerization proceeds through the homopolymerization of the ternary molecular complex in the steady state with a bimolecular termination. Both the conventional radical mechanism and the double complex mechanism are unsuitable for the present alternating copolymerization.     

Non-ideality in vinyl polymerization—VI: Polymerization of methyl methacrylate initiated by benzoyl peroxide

The polymerization of methyl methacrylate in benzene was initiated by benzoyl peroxide and examined by kinetic analysis particularly from the point of view of primary radical termination. It is concluded that the velocity constant for dissociation of the benzoyloxy radical to give the phenyl radical is affected by the nature of the medium.     

Polymerization of coordinated monomers. XIX. Kinetic study of the alternating copolymerization of methyl methacrylate with styrene by boron trichloride

Alternating copolymerizations of methyl methacrylate with styrene in the presence of boron trichloride at 0°C in 1,2-dichloroethane were carried out by using benzoyl peroxide as an initiator. Conversion increased proportionally with polymerization time, whereas the degree of polymerization was constant irrespective of time. The rate depended linearly on the square root of the concentration of benzoyl peroxide. The equilibrium constants for the formation of the ternary molecular complex composed of methyl methacrylate, styrene, and boron trichloride in 1,2-dichloroethane at ?20, ?10, and +4°C were determined by ¹H-NMR spectroscopy. The concentrations of the ternary molecular complex in the polymerization mixtures were evaluated from the equilibrium constant of the formation. The rate of the alternating copolymerization was proportional to the first order of the concentration of the ternary molecular complex. The distribution of methyl methacrylate-centered triads in the alternating copolymer was different from that of styrene-centered triads. These results can be explained by a mechanism involving the homopolymerization of a ternary molecular complex.     

Effect of dose rate on radiation-induced polymerization of styrene adsorbed on silica gel

The effect of dose rate on the rate of polymerization and molecular weight distribution of radiation-induced polymerization of styrene adsorbed on silica gel was studied in a wide dose rate range of 4.4 × 10⁴ to 3 × 10⁸ rad/hr by γ rays of ⁶⁰Co and electron beams with a Cockcroft-Walton-type accelerator. Dose rate dependence on the initial rate of polymerization was about 1 below 3 × 10⁷ rad/hr, and it decreased gradually at high dose rates. Throughout the dose rate range, graft polymerizations and homopolymerizations by cationic and radical mechanisms proceeded simultaneously. Dose rate dependence of the cationic polymerization was 1 below 3 × 10⁷ rad/hr, while dose rate dependence of the radical polymerization was 0.65 below 3 × 10⁷ rad/hr. At high dose rates, molecular weight and fraction of graft polymer decreased, and fraction of cationic polymerization increased. A very high-molecular-weight graft polymer was formed above 4.4 × 10⁵ rad/hr at the initial stage of the polymerization. The dose rate dependence of this polymerization was larger than 1 and decreased with increase in dose rate. The polymerization seems to be related to an excitation of monomer or growing chain.     

Polymerization of coordinated monomers. VI. Molecular complex formation of methyl methacrylate coordinated to stannic chloride with styrene or toluene

The equilibrium constants for the complex formation between stannic chloride and methyl methacrylate were determined in n-hexane–toluene solution at 0, ?20, and ?30°C by using the absorption band at 350 nm. Continuous variation plots at ?20°C in n-hexane based on the ¹H-chemical shifts definitely show a 1:1 interaction between the coordinated methyl methacrylate and styrene or toluene. The magnitudes of the shifts for the four groups of protons in methyl methacrylate are found to be in a specific ratio in common with the 1:2 complex–styrene or -toluene system. The equilibrium constants for the ternary molecular complex formation between the 1:2 complex and styrene or toluene were determined in n-hexane in the temperature range ?50 to +20°C by use of the chemical shifts. The concentrations of the complex species in the alternating copolymerization solutions were estimated by use of the equilibrium constants. There is a linear relationship between the enthalpy and the entropy changes for the ternary molecular complex formation, which is governed by the enthalpy factor. The specificity of the interactions indicates a specific time-averaged orientation of benzene ring to the coordinated methyl methacrylate. The effects of the coordination of methyl methacrylate to stannic chloride were discussed on the basis of results of ¹³C-NMR spectroscopy.     

Polymerization of complexed monomers. II. Alternating copolymers of indene with methyl acrylate and methyl methacrylate

Indene has been copolymerized with polar monomers in the presence of ethylaluminum sesquichloride. The polymers have molecular weights in the 7,000–10,000 range and soften at temperatures above 150°C. The NMR spectra of the copolymers are discussed with reference to polymer structures and chain conformations. Indene is comparable to cyclopentene in reactivity in copolymerizations with methyl acrylate but is much more reactive than cyclopentene toward methyl methacrylate.     

Polymerization of coordinated monomers. X. Kinetic study of alternating copolymerization of methyl methacrylate and styrene with stannic chloride in dichloroethane

The alternating copolymerization of methyl methacrylate with styrene with the use of stannic chloride was kinetically examined at ?20°C in 1,2-dichloroethane both under photoirradiation and with radical initiator (2:1 tri-n-butylboron-benzoyl peroxide system). At conversions lower than 7%, the conversion increases linearly to the polymerization time, whereas the degree of polymerization is constant irrespective of the polymerization time. The alternating copolymerizations are 1.5 order and the 1.0 order reactions with respect to the ternary molecular complex composed of stannic chloride, methyl methacrylate, and styrene, under photoirradiation and with initiator, respectively. The linear dependences of the rates upon the 0.5 order of the intensity of the incident light and upon the 1.0 order of the concentration of tri-n-butylboron indicate a bimolecular termination. The rate normalized by the 1.5 order of the concentration of the coordinated methyl methacrylate and the rate normalized by the concentration of the coordinated methyl methacrylate are proportional to the 1.5 and 1.0 orders of the charged concentration of styrene, for the copolymerizations under photoirradiation and with initiator, respectively. The kinetic results in the 1,2-dichloroethane solution are quite consistent with those in the toluene solution. The alternating copolymerization mechanism, in which the ternary molecular complex predominantly homopolymerizes as a monomer unit, is confirmed.