The polycrystalline Ho4Ni11In20 was obtained by arc-melting of the elements. The subsequent high temperature procedure was used for single crystal growth. Crystal structure of the compound was investigated by X-ray single crystal method: U4Ni11Ga20 type, C 2/m, a = 22.4528(17), b = 4.2947(3), c = 16.5587(13) Å, β = 124.591(5)°, R1 = 0.0276, wR2 = 0.0493 for 1989 independent reflections with [I>2σ(I)].The structure is composed of three-dimensional network from Ni and In atoms in which Ho atoms fill distorted pentagonal channels. Open image in new window相似文献
This paper reports a successful preparation of a pure forsterite Mg2SiO4 using the sol–gel approach and its application for the removal of impurities from a Tunisian frying oil. Magnesium nitrate hexahydrate and tetraethylortho-silicate were used as magnesium and silicon precursors, respectively. The synthesis was held at different calcination temperatures for 30?min. The annealed samples were characterized by X-ray diffraction, Fourier transform infrared, scanning electron microscopy, and laser diffraction. The results revealed that the sample calcined at 500?°C was forsterite with unimodal particle size distribution (PSD) centered at 122.8?±?0.3?μm. The dispersion index I (indicator of particle size uniformity) was 1.84. With the temperature increase, well crystallized compounds were obtained. Their PSDs remain unimodal and shift towards smaller particles. A decrease of the dispersion index was also noted, indicating the formation of Mg2SiO4 with more uniform particle size. This study showed that 900?°C could be selected as energy saving temperature suitable for the preparation of a pure and well crystallized Mg2SiO4 within just 30?min of annealing time. The obtained silicate exhibited promoting results for the purification of waste frying oils.
Pure and fine Mg2SiO4 powder with unimodal particle size distribution was prepared by sol gel route under energy saving conditions. The obtained magnesium orthosilicate showed excellent results for waste frying oil purification
Structural and thermal properties of the 20Li2O-80TeO2 glass were studied using X-ray diffraction analysis and differential scanning calorimetry techniques to understand and control
the crystallization process on this glass. The γ-TeO2, α-TeO2 and α-Li2Te2O5 phases were identified during the crystallization in this glass. Activation energies and Avrami exponent n were calculated
from non-isothermal measurements for glasses with different particle size. The mean values of Avrami exponent were obtained for glasses with 63–75 and 45–63 μm particle sizes such as , but glasses with particle size 38–45 μm and smaller than 38 g,m presented . 相似文献
A glow discharge polymer (GDP) was fabricated using trans-2-butene (T2B) and hydrogen (H2) via a plasma-enhanced chemical vapor deposition (PECVD) system. The uniformity of the GDP films was significantly affected by the radial distribution of the H2/T2B plasma parameters. The plasma properties while discharging by a multi-carbon gas source of mixed H2/T2B were investigated during the GDP deposition process. The main positive ions and ion energy distributions in inductively coupled H2/T2B plasmas were analyzed by energy-resolved mass spectrometer (MS), and the electron density and the effective electron temperature were mainly analyzed using a Langmuir probe. The MS results show that the main positive ions in the plasmas are \({\text{C}}_{ 2} {\text{H}}_{ 4}^{ + }\), \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 3}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 8}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 5}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 1 0}^{ + }\), \({\text{C}}_{ 5} {\text{H}}_{ 5}^{ + }\), and \({\text{C}}_{ 5} {\text{H}}_{ 7}^{ + }\) with mass-to-charge ratios (m/e) of 28, 30, 39, 42, 44, 53, 58, 65, and 67, respectively. For a normalized ion intensity, the relative intensities of saturated CH ions increase with increasing radial distance, while the unsaturated CH ions decrease with increasing radial distance. The ion energy distribution of \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\) (m/e = 30) presents a bimodal structure. Additionally, both the electron density and the effective electron temperature decrease with increasing radial distance. 相似文献
As a promising Li-ion battery cathode active material, lithium-rich manganese-based layer-structured oxides suffer from inferior cycle performance and poor rate capability. Herein, Nb-doped Li1.2Mn0.54Ni0.13Co0.13O2 is prepared by a sol-gel method, and the effects of Nb doping on its electrochemical performance are investigated. It is concluded that the Nb-doped Li1.2Mn0.54Ni0.13Co0.13O2, has a good layered structure along c-axis independent on the amount of Nb dopant and little cationic mixing. Nb doping for Li1.2Mn0.54Ni0.13Co0.13O2 has no obvious influence on its morphology. It is found that Nb doping can enhance the electrochemical activity of Li1.2Mn0.54Ni0.13Co0.13O2, such as improved rate performance and cycle performance under high rate conditions. Li1.2Mn0.54Ni0.13Co0.13O2 doped with 0.015 Nb shows the best cycle performance under the high rate with the capacity maintenance of 95.4% after 100 cycles under 5 C rate, which is higher than that of the undoped one by 10.5%.
A porous, hollow, microspherical composite of Li2MnO3 and LiMn1/3Co1/3Ni1/3O2 (composition: Li1.2Mn0.53Ni0.13Co0.13O2) was prepared using hollow MnO2 as the sacrificial template. The resulting composite was found to be mesoporous; its pores were about 20 nm in diameter. It also delivered a reversible discharge capacity value of 220 mAh g?1 at a specific current of 25 mA g?1 with excellent cycling stability and a high rate capability. A discharge capacity of 100 mAh g?1 was obtained for this composite at a specific current of 1000 mA g?1. The high rate capability of this hollow microspherical composite can be attributed to its porous nature.
The crystal structures of three birefringent grossular-andradite natural garnets Ca3(Al,Fe)2(SiO4)3 were investigated using single-crystal X-ray diffraction data (MoKα, number of reflections measured 8065, 10619, 9213; R = 2.81, 2.74, 3.26%). According to the values of unit cell constants, inconsistent intensities of reflections and appearance
of additional (forbidden) reflections explored garnets have different symmetry: cubic, sp. gr.
(Fe/(Fe + Al) = 0.078, Δn = 0.0002); orthorhombic, sp. gr. Fddd (Fe/(Fe + Al) = 0.58, Δn = 0.0089); triclinic, sp. gr.
or I1 and pseudo-orthorhombic (Fe/(Fe + Al) = 0.23, Δn = 0.0066). Careful refinement of all crystal structures in space groups
, Fddd and
has confirmed the symmetry reduction detected on the diffraction patterns and shown that dissymmetrization of cubic garnets
connects with partial ordering of trivalent cations over Y-sites. Direct linear relationship between Fe-occupancy, an average
Y–O bond lengths and octahedral O–O edges has been revealed. Cluster models of dissymmetrization have been regarded. Evidence
for the “growth dissymmetrization” phenomena (kinetic phase transformations) as the reasons of the symmetry reduction of cubic
garnets has been discussed. The reasonable assumption that the garnets crystal structures described as orthorhombic are triclinic,
but the deviations from the orthorhombic symmetry so small, that cannot be manifested by of X-ray diffraction study has been
taken. 相似文献
The aim of this work was an investigation of structural and electrical properties of ZnO/Zn2-xFexTiO4 (x?=?0.7, 1, 1.4) powders. The compounds obtained by sol-gel method are characterized by several techniques: X-ray diffraction (XRD), N2 adsorption–desorption isotherms, scanning and transmission electron microscopy (SEM and TEM), X-ray photoelectron spectroscopy (XPS), electrical and dielectrical measurements. The XRD, SEM and XPS analysis confirmed the formation of ZnFeTiO4 inverse spinel structure. The electrical and dielectrical properties of ZnO/Zn2-xFexTiO4 (x?=?0.7, 1, 1.4) were measured by impedance spectroscopy, revealing a decrease in the electrical conductivity and the dielectric constant with Fe content.
The incorporation of nanomaterials into electrochemical sensors is an attractive approach towards the improvement of the sensitivity of amperometry and also can provide improved sensor selectivity and stability. This review (with 137 references) details the current state of the art and new trends in nanomaterial-based electrochemical sensing of hydrogen peroxide (H2O2), hydrogen sulfide (H2S) and nitric oxide (NO) in cells or released by cells. The article starts with a discussion of the significance of the three analytes, and this is followed by three sections that summarize the electrochemical detection schemes for H2O2, H2S and NO. Each section first summarizes the respective physiological roles, and then reviews electrochemical sensors based on the use of carbon nanomaterials, noble metal nanomaterials, metal oxide nanomaterials, and layered doubled hydroxides. The materials are compiled in three tables along with figures of merit for the various sensors.
Graphical abstract Nanomaterial-based electrochemical sensors for Reactive oxygen species (H2O2), Reactive nitrogen species (NO) and Reactive hydrogen sulfide species (H2S) inside cells or released by cells.
We report on the synthesis of Fe3O4@SiO2 nanoparticles incorporated poly(divinylbenzene) monolithic column via in situ polymerization. The monolith had larger specific surface area and relatively uniform porous structure and was characterized by scanning electron microscopy, nitrogen adsorption–desorption, and Fourier transform infrared spectroscopy. The monolith was then applied for the evaluation of gas chromatography separation properties. Here, an electromagnetic induction heating technique was employed to control the column temperature with the thermal effect of eddy current in ferromagnetic materials Fe3O4. The monolith offered good separation efficiency for benzene and toluene and a higher column efficiency was obtained up to 4481 and 9216 plates per meter, respectively. In addition, the injection volume and column capacity of the proposed system are as much as 5 µL and 100 ng. This makes it possible to use a UV detector. The fabricated Fe3O4@SiO2 nanoparticles incorporated poly(divinylbenzene) monolithic column has been shown to be very promising for gas chromatography separation.
Abstract The title complexes and have been synthesized in excellent yields by reacting Co(OAc)2·4H2O with H2L1 and H2L2, respectively, in acetonitrile solution. Here, [L1]2− and [L2]2− are the deprotonated forms of N,N-bis(2-hydroxybenzyl)-N′,N′-dimethylethylenediamine and N,N-bis(2-hydroxybenzyl)-2-picolylamine, respectively. The crystal structures of and were determined by x-ray crystallography. In , each cobalt atom has distorted trigonal bipyramid geometry, while in , each cobalt atom has distorted octahedral geometry. Variable temperature magnetic moment measurements show weak antiferromagnetic
interaction in . The magnetic characterization for is in agreement with the presence of Co(II) and Co(III) centers.
Graphical Abstract The title complexes and have been synthesized in excellent yields by reacting Co(OAc)2·4H2O with dianionic N2O2 coordinating ligands. In complex 1, each cobalt atom has distorted trigonal bipyramid geometry, while in complex 2, each
cobalt atom has distorted octahedral geometry. Variable temperature magnetic moment measurements show weak antiferromagnetic
interaction in complex 1. The magnetic characterization for complex 2 is in agreement with the presence of Co(II) and Co(III)
centers.
Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. 相似文献
Herein, porous Li3V2(PO4)3/C microspheres made of nanoparticles are obtained by a combination of sol spray-drying and subsequent-sintering process. Beta-cyclodextrin serves as a special chelating agent and carbon source to obtain carbon-coated Li3V2(PO4)3 grains with the size of ca. 30–50?nm. The unique porous structure and continuous carbon skeleton facilitate the fast transport of lithium ion and electron. The Li3V2(PO4)3/C microspheres offer an outstanding electrochemical performance, which present a discharge capacity of 122?mAh?g?1 at 2?C with capacity retention of 96% at the end of 1000 cycles and a high-rate capacity of 113?mAh?g?1 at 20?C in the voltage window of 3.0–4.3?V. Moreover, the Li3V2(PO4)3/C microspheres also give considerable cycling stability and high-rate reversible capacity at a higher end-of-charge voltage of 4.8?V.
The REGDIA regression diagnostics algorithm in S-Plus is introduced in order to examine the accuracy of pKa predictions made with four updated programs: PALLAS, MARVIN, ACD/pKa and SPARC. This report reviews the current status of
computational tools for predicting the pKa values of organic drug-like compounds. Outlier predicted pKa values correspond to molecules that are poorly characterized by the pKa prediction program concerned. The statistical detection of outliers can fail because of masking and swamping effects. The
Williams graph was selected to give the most reliable detection of outliers. Six statistical characteristics (Fexp, R2, , MEP, AIC, and s(e) in pKa units) of the results obtained when four selected pKa prediction algorithms were applied to three datasets were examined. The highest values of Fexp, R2, , the lowest values of MEP and s(e), and the most negative AIC were found using the ACD/pKa algorithm for pKa prediction, so this algorithm achieves the best predictive power and the most accurate results. The proposed accuracy test
performed by the REGDIA program can also be applied to test the accuracy of other predicted values, such as log P, log D, aqueous solubility or certain physicochemical properties of drug molecules. 相似文献
Li[Ni1/3Co1/3Mn1/3]O2 (NCM 111) is a promising alternative to LiCoO2, as it is less expensive, more structurally stable, and has better safety characteristics. However, its capacity of 155 mAh g?1 is quite low, and cycling at potentials above 4.5 V leads to rapid capacity deterioration. Here, we report a successful synthesis of lithium-rich layered oxides (LLOs) with a core of LiMO2 (R-3m, M?=?Ni, Co) and a shell of Li2MnO3 (C2/m) (the molar ratio of Ni, Co to Mn is the same as that in NCM 111). The core–shell structure of these LLOs was confirmed by XRD, TEM, and XPS. The Rietveld refinement data showed that these LLOs possess less Li+/Ni2+ cation disorder and stronger M*–O (M*?=?Mn, Co, Ni) bonds than NCM 111. The core–shell material Li1.15Na0.5(Ni1/3Co1/3)core(Mn1/3)shellO2 can be cycled to a high upper cutoff potential of 4.7 V, delivers a high discharge capacity of 218 mAh g?1 at 20 mA g?1, and retains 90 % of its discharge capacity at 100 mA g?1 after 90 cycles; thus, the use of this material in lithium ion batteries could substantially increase their energy density.
Graphical Abstract Average voltage vs. number of cycles for the core–shell and pristine materials at 20 mA g?1 for 10 cycles followed by 90 cycles at 100 mA g?1
In this work, Bi3.64Mo0.36O6.55 nanoparticles (NPs) were successfully prepared by a facile hydrothermal method and utilized in pseudocapacitor for the first time. Within a redox potential range from ?1.0 to 0 V vs. Hg/HgO in a 1 M aqueous KOH solution by cyclic voltammetry (CV), chronopotentiometry (CP) and AC impendence, the specific capacitance could reach 998 F g?1 at 1 A g?1, which is possibly ascribed to the higher Bi content of Bi3.64Mo0.36O6.55 NPs. Furthermore, the Bi3.64Mo0.36O6.55 NP electrode exhibited good cycle stability maintaining over 85 % after 5000 cycles. These results demonstrated Bi3.64Mo0.36O6.55 NPs might be a promising electrode material for pseudocapacitor.
Graphical abstract The fabrication of uniform Bi3.64Mo0.36O6.55 nanoparticles with a diameter of 100 nm were succefully reported by a facial hydrothermal method, which exhibits a extraordinary electronic performance with 998 F g-1 at 1 A g-1 and cycling stability
In this study, pure titanium dioxide (TiO2), Ta-doped TiO2, S-doped TiO2, and Ta-S-codoped rutile TiO2 photocatalysts were prepared by a sol-gel method. To evaluate the properties of the synthesized samples, X-ray diffraction analysis (XRD) and X-ray photoelectron spectroscopy (XPS) were applied. XRD detection results showed that the samples contained rutile phase basically. Scanning electron microscope observation showed that the morphology of Ta-S-TiO2 was nearly spherical. Transmission electron microscope investigation indicated that Ta-S-TiO2 had a flower-shaped structure consisting of many nanorods. The measurement of Brunauer-Emmett-Teller (BET)-specific surface areas (SBET) showed that tantalum and sulfur codoping can effectively increase the SBET of TiO2. XPS results indicated that Ta was in the form of Ta5+ in the TiO2 structure. Finally, the photocatalytic activities of synthesized photocatalyst samples were measured for the degradation of methylene blue in ultraviolet and visible light irradiation. The results demonstrated that the Ta-S-codoped rutile TiO2 photocatalyst had better photocatalytic performance than pure rutile TiO2, Ta-doped rutile TiO2 and S-doped rutile TiO2 photocatalyst.
Effects of pure TiO2, Ta-TiO2, S-TiO2, and Ta-S-TiO2 on degradation of MB under visible light irradiation (a) and ultraviolet (UV) irradiation (b) were studied. Ta-S-TiO2 exhibited a good photocatalytic performance under UV and visible light irradiation.
It is reported that a mixture of WS2 nanosheets (WS2 NS) and silver nanoclusters (AgNCs) displays strongly enhanced peroxidase-mimicking activity. The catalytic effect of the mixture was studied by colorimetry, fluorometry, chemiluminescence (CL) and electrochemistry. The effect is interpreted in terms of a difference between the Fermi energy level of the two nanomaterials. This leads to the formation of charge separation regions which act as active sites for enzyme mimetic interaction with the substrates. The mixture of WS2 NS and AgNCs was exploited for the non-enzymatic determination of H2O2 and glucose. A stopped-flow method was applied as a sensitive CL detection system using the bicarbonate-H2O2 reaction. The mixture has a powerful peroxidase mimicking activity on the bicarbonate-H2O2 CL reaction, and this effect is much larger than that of any single constituent. In addition, the CL emission is improved several times by using the stopped-flow technique. Under optimum condition, H2O2 can be determined in the 2.5–1500 nM concentration range. Moreover, glucose levels in human serum can be quantified via glucose oxidase based oxidation which leads to the generation of H2O2. Using this CL assay, a linear relationship was obtained between the intensity of the CL emission and glucose concentration in the range of 0.03–20 μM, with a limit of detection (3S) of 13 nM.
Graphical abstract An enhanced peroxidase-like catalytic activity for WS2 nanosheets (WS2 NS) was revealed in the presence of silver nanoclusters (AgNCs), and was exploited for the non-enzymatic determination of H2O2, and of glucose (via glucose oxidase; GOx) using a stopped-flow CL method.
Optimum conditions for synthesizing monoclinic and triclinic Mg2B2O5 compounds by high-temperature solid-state reactions were investigated. Mixtures composed of boric acid and magnesium oxide
at MgO:B2O3 mole ratios of 1:0.25, 1:0.5 and 1:1.5 were heated for 1 hour at temperatures between 600–1050°C and the formed phases were
identified by XRD analysis. Monoclinic Mg2B2O5 was formed by heating at 850°C for 4 hours together with minimum amounts of triclinic Mg2B2O5, while triclinic Mg2B2O5 was formed as a single phase at 1050°C for the same reaction time. The products obtained at optimum conditions were subjected
to a series of tests to determine their chemical compositions, particle size distributions, surface area values, IR spectra
and TG/DTA patterns.
相似文献
