新型表面分子印迹法制备苦参碱印迹材料及其分子识别特性

通过γ-(甲基丙烯酰氧)丙基三甲氧基硅烷的媒介, 将功能大分子聚甲基丙烯酸(PMAA)偶合接枝到硅胶微粒表面, 形成了接枝微粒PMAA/SiO₂, 采用本课题组建立的新型分子表面印迹技术, 以生物碱苦参碱(来源于苦豆子)为模板分子, 乙二醇二缩水甘油醚(EGDE)为交联剂, 对接枝在硅胶表面的PMAA大分子链进行了分子印迹, 制备了苦参碱表面分子印迹材料MIP-PMAA/SiO₂. 以另一种生物碱金雀花碱(亦来源于苦豆子)为对比物, 采用静态与动态两种方法研究了MIP-PMAA/SiO₂对苦参碱的结合性能与分子识别特性. 实验结果表明, 印迹材料MIP-PMAA/SiO₂对苦参碱具有特异的识别选择性与优良的结合亲和性, 相对于金雀花碱(与苦参碱共存于苦豆子植物中, 且结构彼此相似), 识别选择性系数为8.14. 此外, 印迹材料MIP-PMAA/SiO₂也具有良好的解吸性能, 以含氯化钠的乙酸水溶液作为洗脱液, 17个床体积内解吸率达到99.77%.     

SiO2改性的V2O5-MoO3/ TiO2催化剂抗碱中毒性能研究

以陶瓷为骨架,用溶胶凝胶法和浸渍法制备了V₂O₅-MoO₃/ TiO₂催化剂,并用SiO₂进行改性。采用浸渍法模拟碱K中毒,研究了SiO₂改性前后催化剂中毒脱硝效率的变化,并通过BET、H₂-TPR、NH₃-TPD等技术手段对催化剂进行了表征。结果表明,加入SiO₂后,催化剂的比表面积明显提高。SiO₂改性后新鲜催化剂还原温度向低温方向迁移10 ℃左右,氧化还原能力得到了提高,其表面酸强度和酸量也得到较大的提高。反应评价结果表明,SiO₂改性可以提高催化剂抗碱中毒的性能。     

纳米木质素/二氧化硅基微胶囊的制备及在自愈合涂层中的应用

利用磷酸化改性木质素/二氧化硅复合纳米颗粒(PAL/SiO₂)作为壁材包埋活性组分异佛尔酮二异氰酸酯(IPDI)制备微胶囊(PAL/SiO₂-IPDI). 通过加入少量反应活性更高的聚合多甲基多二异氰酸酯(PMDI), 与水反应形成聚脲, 以增加微胶囊的壁厚. 采用光学显微镜、 扫描电子显微镜(SEM)和激光粒度分析仪(DLS)研究了PAL/SiO₂复合纳米粒子掺杂量, 水油比和剪切速率对微胶囊表面形貌、 粒径和壁厚的影响. 结果表明, 所制备的微胶囊呈现规整球形, 壁厚为2.36~3.50 μm, 平均粒径为40.3~201.5 μm. IPDI作为芯材包埋在微胶囊中, 芯材含量约为82.8%. 将制备的PAL/SiO₂-IPDI微胶囊添加到环氧树脂中得到自愈合环氧树脂涂层. 其在高盐浓度溶液中的抗侵蚀测试结果显示, 添加质量分数4%的PAL/SiO₂-IPDI微胶囊的环氧树脂涂层在划破后能够快速愈合, 显著降低基底的腐蚀电流和腐蚀速率. 纳米压痕实验表明, 环氧涂层的硬度为249.99 MPa, 而添加PAL/SiO₂-IPDI微胶囊后硬度增加到302.98 MPa, 弹性模量也有提高.     

SiO2负载Au-Pd双金属纳米颗粒催化甲醇选择性氧化合成甲酸甲酯

甲醇选择氧化制备甲酸甲酯（MF）是延伸甲醇产业链、开发高附加值下游产品的有效途径之一,负载型Au及Pd催化剂在这一反应中表现出优异的低温催化性能。为探索实用、高效和易再生的甲醇选择氧化催化剂,同时揭示双金属颗粒中Au和Pd的协同效应及甲醇氧化反应机理,本研究制备了一系列二氧化硅负载的Au-Pd催化剂（Au-Pd/SiO₂）,详细研究了其对甲醇选择氧化制甲酸甲酯的催化性能。结果表明,Au和Pd总负载量为0.6%、且Au/Pd质量比为2时,所制备的Au₂-Pd₁/SiO₂催化剂表现出优异的甲醇氧化催化性能;在130℃下,甲醇转化率达到57.0%,MF选择性为72.7%。多种表征结果显示,Au-Pd双金属纳米颗粒粒径为2-4 nm,高度分散于SiO₂载体表面,倾向于生成孪晶结构并暴露（111）晶面,这些因素是Au-Pd/SiO₂具有优异催化性能的主要原因。通过DRIFTS表征研究,提出了一个可能的MF生成机理：即甲醇首先与处于Au-Pd纳米粒子界面的表面氧作用,生成化学吸附的甲氧基;随后,甲氧基经去质子作用生成吸附的甲醛物种,后者与相邻的甲氧基物种亲核反应,并经β-H消除后得到目标产物MF。     

硅烷改性纳米ZrO2对镁锂合金表面环氧树脂涂层耐蚀性能的影响

采用涂覆法在镁锂合金表面制备了含双-[3-(三乙氧基硅)丙基]四硫化物(KH-69硅烷)改性纳米ZrO₂的环氧树脂涂层. 通过傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和电化学阻抗谱(EIS)等手段表征了该涂层. 考察了KH-69硅烷改性纳米ZrO₂浓度对环氧树脂涂层耐蚀性能的影响. 结果表明, KH-69硅烷改性纳米ZrO₂能显著提高镁锂合金表面环氧树脂涂层的耐腐蚀性能, 其中1.0%(质量分数) KH-69硅烷改性纳米ZrO₂环氧树脂涂层具有较好的耐蚀性能. 在NaCl溶液中浸渍528 h后的低频阻抗值为1.6×10⁹ Ω·cm², 相比在NaCl溶液中浸渍240 h的纯环氧树脂涂层提高约5个数量级.     

层层自组装结合后处理制备耐磨超亲水增透纳米粒子涂层

通过层层自组装方法制备的二氧化硅纳米粒子涂层由于具有增透、超亲水的良好性质, 引起了广泛关注. 然而, 这种涂层的耐磨性往往达不到实际应用的要求. 本工作尝试通过后处理来增强涂层耐磨性. 首先采用自制二氧化硅纳米颗粒, 聚二烯丙基二甲基氯化铵(PDDA)和聚苯乙烯磺酸钠(PSS), 通过层层自组装制备了PDDA/SiO₂纳米粒子涂层, 其中(PDDA/SiO₂)₆涂层透过率最高. 随后将(PDDA/SiO₂)₆涂层依次经过124 ℃水热处理1 h和700 ℃快速淬火200 s处理, 得到同时具有超亲水性和增透性的涂层, 其中(PDDA/SiO₂)₆涂层在可见光范围内最大透过率高达99.0%. 实验表明, 这种后处理也极大地提高了涂层的耐磨性.     

基于离子交换和表面引发接枝聚合制备阴离子表面印迹材料及其识别特性研究

建立了一种新的离子表面印迹(IIP)方法. 使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面改性, 制得表面含有氨基的改性硅胶AMPS-SiO₂. 凭借离子交换作用, 阳离子单体甲基丙烯酰氧乙基三甲基氯化铵(DMC)结合在模板离子磷酸根周围; 改性硅胶AMPS-SiO₂表面的氨基与溶液中的过硫酸盐构成氧化还原引发体系, 使DMC及交联剂N,N'-亚甲基双丙烯酰胺(MBA)在硅胶微粒表面发生接枝交联聚合, 从而实现了磷酸根离子的表面印迹, 制得了阴离子表面印迹材料IIP-PDMC/SiO₂. 采用静态与动态两种方法, 考察研究了IIP-PDMC/SiO₂对PO₄^3-离子的识别特性与结合性能. 研究结果表明, 离子表面印迹材料IIP-PDMC/SiO₂对PO₄^3-离子具有特异的识别选择性与优良的结合亲和性, 相对于对比离子高锰酸根离子, IIP-PDMC/SiO₂对PO₄^3-离子的识别选择性系数为9.58.     

聚乙烯导热复合材料的电子束辐照改性

将低密度聚乙烯(LDPE)、氧化铝(Al₂O₃)和纳米二氧化硅(SiO₂)进行熔融共混,再通过电子束辐照对得到的材料进行改性,得到了同时具有高导热性能和力学性能的复合材料(PE-Al-Si)。 当纳米SiO₂的质量分数为1%,电子束辐照剂量为120 kGy时,与不含SiO₂的复合材料(PE-Al)相比,PE-Al-Si的导热系数达到了0.759 W/(m·K),提高了22%。 另外,PE-Al-Si的拉伸强度比PE-Al提高了17%。 证明SiO₂不仅可以改善复合材料的力学性能,同时还提高了辐照效率及复合材料的导热性能。     

振荡剪切流场下PS/PVME/SiO2复合物的相行为

利用光学显微镜-剪切台联用系统研究了振荡剪切流场下聚苯乙烯（PS）/聚甲基乙烯基醚（PVME）/二氧化硅（SiO₂）纳米粒子复合物的热力学稳定性. 结果表明,小振幅振荡剪切可导致PS/PVME共混物出现类似在稳态流场下的剪切诱导相容及剪切诱导相分离现象. 共混体系存在临界振荡频率ω_c,当振荡频率低于ω_c时,发生剪切诱导相分离（SID）行为,反之发生剪切诱导相容（SIM）行为. SiO₂纳米粒子的加入使复合体系的相容性提高. 存在一个临界SiO₂纳米粒子含量φ_c,当SiO₂纳米粒子含量高于φ_c时,复合体系中不存在临界振荡频率ω_c,低振荡频率下的剪切诱导相分离得到抑制. 此外,复合体系的上述行为与升温速率和共混物组成密切相关.     

原位合成纳米SiO2增强阴离子聚酯型上浆剂及其对碳纤维复合材料层间剪切强度的影响

采用溶胶-凝胶法, 在侧链带有羧基的线性不饱和聚酯中加入正硅酸乙酯(TEOS), 使TEOS在酸性条件下发生水解反应, 原位合成纳米SiO₂增强阴离子型聚酯乳液(SEAPE). 利用傅里叶变换红外光谱(FTIR)仪、 激光粒度分析仪和冷冻扫描电子显微镜(Cryo-SEM)对SEAPE进行分析与表征. 将SEAPE与聚乙二醇单油酸酯润滑剂、 非离子型表面活性剂FC-4430及抗氧剂1010进行复配, 原位制备纳米SiO₂增强阴离子型聚酯乳液上浆剂(SEAPEs), 用扫描电子显微镜(SEM)、 视频动态接触角测量仪、 X射线能谱(EDS)仪和纤维强力仪对SEAPEs上浆后碳纤维的表面形貌、 表面能、 碳纤维(CF)表面元素及碳纤维增强不饱和聚酯(UPR)复合材料(CF/UPR)的层间剪切强度(ILSS)进行测试与表征. 结果表明, 当TEOS添加质量分数为5%时, SEAPEs上浆后的碳纤维有效增强了其与UPR的结合强度, CF/UPR复合材料的ILSS达到40.03 MPa, 与市售环氧树脂型上浆剂上浆后碳纤维增强UPR复合材料相比, ILSS提高90.1%. SEAPEs中原位生成的纳米SiO₂分散均匀, 乳液储存稳定, 上浆后SiO₂均匀吸附在碳纤维表面, 增加碳纤维表面能, 改善碳纤维与树脂间的浸润性, 可有效提高碳纤维增强不饱和聚酯树脂复合材料的ILSS.     

含三苯基氧磷结构聚芳醚醚酮酮的合成与表征

以苯酚、对二溴苯及苯基磷酰二氯为原料合成出二(4-苯氧基苯基)苯基氧磷(BPOPPO)。 三氯化铝(AlCl₃)为催化剂,通过缩聚反应,BPOPPO与对苯二甲酰氯(TPC)反应制备出一种含有三苯基氧磷结构的聚醚醚酮酮(P-PEEKK)树脂。 采用傅里叶变换红外光谱仪(FT-IR)、差示扫描量热仪(DSC)、热重分析仪(TGA)和广角X射线衍射(WAXD)等技术手段对P-PEEKK树脂的结构和性能进行表征。 结果表明,P-PEEKK树脂属于非晶聚合物,玻璃化转变温度(T_g)较高,为190.5 ℃;热分解温度(T_5%)为515 ℃,耐热性能较好;极限氧指数(LOI)为42,阻燃性能好,为难燃材料;易溶解于氯仿、1,2-二氯乙烷、N,N-二甲基乙酰胺等有机溶剂中,溶解性能较好,便于涂膜加工;拉伸强度为62 MPa,力学性能较好。     

纳米SiO2/HPAM/NaCl分散体系的稳定性、流变性及驱油性能研究

利用纳米粒度及Zeta电位分析仪、流变仪和悬滴法对纳米SiO_2/HPAM/NaCl体系60℃的稳定性、流变性及油水界面张力进行了研究。结果表明,HPAM的加入使SiO_2悬浮液的Zeta电位更负、粒径明显增加,静置10 d无明显浑浊现象。加入纳米SiO_2后,HPAM溶液的黏度增加,耐温、耐盐和耐剪切性能得到改善。对于质量分数为0.18%的HPAM溶液,SiO_2质量分数小于0.5%时,随SiO_2质量分数的增加,体系的黏度、储能模量和损耗模量增加,临界线性应变减小,蠕变回复能力增强;SiO_2质量分数大于0.5%时,出现了相反的现象;这是因为SiO_2质量分数不同时,HPAM在SiO_2表面的吸附量、吸附构型及两者之间形成的网状结构不同。纳米SiO_2的加入同时强化了HPAM降低油水界面张力的性能,加入质量分数为0.2%和0.5%的SiO_2后,HPAM的采收率分别提高了4.5%和6.0%。     

New facts concerning the reaction of K, K(15-crown-5)2 with phenyl glycidyl ether: unexpected formation of potassium cyclopropoxide

A new mechanism of the reaction of K⁻, K⁺(15-crown-5)₂ with phenyl glycidyl ether is presented. The linear ether bond is attacked only to a small extent, if at all. As the main reaction path the oxirane bond in the β-position is cleaved, followed by the γ-elimination of potassium phenoxide and the formation of potassium cyclopropoxide. Crown ether ring opening also occurs in reactions with organometallic intermediates.     

Cleavage of different ether bonds in butyl glycidyl ether and allyl glycidyl ether by K, K(15-crown-5)2

The kind of substituent in alkyl glycidyl ethers affects the course of their reaction with K⁻, K⁺(15-crown-5)₂. The cyclic oxirane ring is exclusively cleaved in the case of butyl glycidyl ether whereas the presence of the unsaturated allyl group in the glycidyl ether molecule unexpectedly prefers the scission of the linear ether bond. In both the systems organometallic intermediates are formed. They react with crown ether causing its ring opening. Allylpotassium formed from allyl glycidyl ether reacts also with another glycidyl ether molecule; the oxirane ring is opened in this case.     

Preparation,Characterization, Luminescent and Electrochemical Properties of Ru(bpy)2-functionalized Silica Nanoparticles

Ru(II)-complex functionalized silica nanoparticles(nano-SiO₂) were prepared via a coordination reaction of cis-dichlorobis(2,2'-bipyridine)ruthenium[Ru(bpy)₂Cl₂] complex with poly(4-vinylpyridine)(P4VP)-modified nano-SiO₂ particles. Both the Ru-complex and the functionalized nano-SiO₂P4VP-Ru(bpy) hybrids were doped in poly(methyl methacrylate)(PMMA) to form optically transparent thin films. The composition and spectroscopic properties of the nano-SiO₂P4VP-Ru(bpy) hybrids were evaluated with the help of thermogravimetric and elemental analysis, and UV-Vis absorption spectroscopy, infrared spectroscopy, X-ray photoelectron spectroscopy, and fluorescence spectroscopy. Microscopy images revealed that the nanohybrids were approximately 12 nm in diameter and readily formed aggregates following the functionalization with P4VP and Ru(bpy)₂Cl₂. The as-prepared nano-SiO₂P4VP-Ru(bpy) hybrids produced emissions at approximately 604 and 654 nm under radiation both in solution and in doped thin films. Finally, cyclic voltammetry studies on the nanohybrid-modified electrode revealed a redox couple with the cathodic and anodic potentials at approximately 0.28 and 0.73 V(vs. Ag/AgCl), attributed to the one electron transfer of Ru(bpy)₂^2+/3+ immobilized on the nano-SiO₂ particles.     

OMS-2/Al2O3/堇青石整体式催化剂的制备及其催化性能研究

以Al₂O₃/堇青石蜂窝陶瓷为载体,氧化锰八面体分子筛(OMS-2)为活性组分,采用涂覆法制备了系列整体式催化剂。考察了黏合剂种类和活性组分涂覆次数对二甲醚(DME)催化燃烧性能的影响,并对催化剂进行XRD、BET、SEM、H₂-TPR、O₂-TPD等表征。结果表明,以甲氧基聚乙二醇为黏合剂经一次涂覆制备的整体式催化剂的性能最佳,活性组分OMS-2以相互交织的簇体均匀分布在载体上,并与Al₂O₃之间存在较强的相互作用。涂层的添加有效增加了催化剂的比表面积,提高了催化剂的性能,最佳催化活性t₉₀为257 ℃。     

Anhydride curing of epoxy resins via chain reaction

In contrast to common curing reactions, the anhydride curing of epoxies follows a living anionic chain growth. The resulting consequences of this mechanism, i.e. (1) DP_n = a[M_o]/[I_o], (2) first-order kinetics and (3) Poisson chain-length distribution were tested with the phenyl glycidyl ether/phthalic acid anhydride system, using l-methyl imidazole. Overall agreement was found and the observed deviations could be explained with a modified Poisson process. Conformational properties of the resins were measured by static and dynamic light scattering and by viscometry. These were compared with the quantities of a corresponding branched system prepared with a mixture of phenyl glycidyl ether and bisphenol-A diglycidyl ether. Typical deviations to smaller dimensions were observed at high molar masses as a result of increasing branching.     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Kinetics of Photocationically Curable Formulations Involving Glycerol Diglycidyl Ether and Phenyl Glycidyl Ether

Kinetic analysis of formulations based on glycerol diglycidyl ether and phenyl glycidyl ether were carried out in the presence of sulfonium salt as initiator at 35 mW cm^?2using photo differential scanning calorimeter and the final conversion was found to increase with an increase in phenyl glycidyl ether content. The effects of formulation monomer ratios at three different temperatures were studied. The variations in the observed kinetic parameters can be related to increase in mobility of reactive species with temperature, distance of counter ion from the propagating cationic center, as well as extent of crosslinking reaction which controlled the course and duration of the reaction. The applicability of autocatalytic kinetic model was also evaluated and the system underwent early gelation and the activation energy decreased with an increase in phenyl glycidyl ether content. Analysis of stable photocured films containing glycerol diglycidyl ether and phenyl glycidyl ether showed better thermal stability than rigid films obtained with glycerol diglycidyl ether.     

硅土/酚酞聚芳醚砜复合材料的制备及性能

使用γ-氨丙基三乙氧基硅烷对硅土进行功能化改性,将功能化的硅土掺入酚酞聚芳醚砜(PES-C)中制备复合材料,并对其热学性能、力学性能及阻隔性能进行表征分析。结果表明,γ-氨丙基三乙氧基硅烷使硅土片层的层间距变大,使硅土处于半剥离状态,且通过溶液共混将表面修饰的片层硅土掺杂于PES-C中更有利于PES-C分子链的插入。所制备的复合材料的T-5%、T-10%和T max分别提升了10.2、10和3.9℃。另外,复合材料的拉伸强度提升8.4 MPa,断裂伸长率提升2.4%,模量提升560.7 MPa。复合材料的氧气渗透系数(P O 2)降低77.4%。