1- and 2-D NMR Studies on [Rh6C(CO)14(PPh3)]2−

A complete NMR study involving both 1D and 2D ¹³C-{¹⁰³Rh} and ³¹P-{¹⁰³Rh} HMQC measurements, on [Rh₆C(CO)₁₄(PPh₃)]^2- are reported and discussed, together with the multiple Rh quantum effects found for resonances associated with edge- and face-bridging CO's. As found in [Rh₆C(CO)₁₅]^2-, the carbonyl ligands in [Rh₆C(CO)₁₄(PPh₃)]^2- undergo CO-intermolecular exchange with ¹³CO at different rates; for the edge-bridging CO's, the lower the value of ¹J(Rh–CO), the faster the rate of intermolecular exchange with ¹³CO.     

The reaction of mixtures of [Rh4(CO)12] and triphenylphosphite with carbon monoxide or syngas as studied by high-resolution, high-pressure NMR spectroscopy

The fragmentation and redistribution reactions of [Rh4(CO)12-x{P(OPh)3}x] (x = 1-4) with carbon monoxide have been studied using high-resolution, high-pressure NMR spectroscopy. Under the conditions of efficient gas mixing in a high-pressure NMR bubble column, [Rh4(CO)9{P(OPh)3}3] fragments to give mainly [Rh2(CO)6{P(OPh)3}2]; [Rh4(CO)11{P(OPh)3}] is also observed,implying redistribution of the phosphite ligand and/or recombination of the dimers to tetrameric clusters. Fragmentation of[Rh4(CO)10{P(OPh)3}2] is found to be pressure-dependent giving predominantly [Rh2(CO)6{P(OPh)3}2] at low CO pressure (1-40 bar), and increasing amounts of [Rh2(CO)7{P(OPh)3}] at higher (40-80 bar) pressure. Using Syngas (CO : H2 (1 : 1)) instead of CO in the above fragmentations, homolytic addition of H2 to the dimer [Rh2(CO)6{P(OPh)3}2] to give [RhH(CO)3{P(OPh3}] and [RhH(CO)2{P(OPh)3}2] is observed. The distribution of tetrameric species obtained is similar to that obtained under the same partial pressure of CO. On depressurisation/out-gassing of the sample, the original mixture of tetrameric clusters is obtained.     

Synthesis and properties of Rh(I) and Ir(I) distibine complexes with organometallic co-ligands

The first series of Rh(I) distibine complexes with organometallic co-ligands is described, including the five-coordinate [Rh(cod)(distibine)Cl], the 16-electron planar cations [Rh(cod)(distibine)]BF4 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 and the five-coordinate [Rh(CO)(distibine)2][Rh(CO)2Cl2] (distibine=R2Sb(CH2)3SbR2, R=Ph or Me, and o-C6H4(CH2SbMe2)2). The corresponding Ir(I) species [Ir(cod)(distibine)]BF4 and [Ir{Ph2Sb(CH2)3SbPh2}2]BF4 have also been prepared. The complexes have been characterised by 1H and 13C{1H} NMR and IR spectroscopy, electrospray mass spectrometry and microanalysis. The crystal structure of the anion exchanged [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF(6).3/4CH2Cl2 is also described. The methyl-substituted distibine complexes are less stable than the complexes of Ph2Sb(CH2)3SbPh2, with C-Sb fission occurring in some of the complexes of the former. The salts [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF6 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 undergo oxidative addition with Br2 to give the known [RhBr2{Ph2Sb(CH2)3SbPh2}2]+, while using HCl gives the same hydride complex from both precursors, which is tentatively assigned as [RhHCl2{Ph2Sb(CH2)3SbPh2}]. An unexpected further Rh(III) product from this reaction, trans-[RhCl2{Ph2Sb(CH2)3SbPh2}{PhClSb(CH2)3SbClPh}]Cl, was identified by a crystal structure analysis and represents the first structurally characterised example of a chlorostibine coordinated to a metal. [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 reacts with CO to give [Rh(CO){Ph2Sb(CH2)3SbPh2}2]BF4 initially, and upon further exposure this species undergoes further reversible carbonylation to give a cis-dicarbonyl species thought to be [Rh(CO)2{Ph2Sb(CH2)3SbPh2}{kappa1Sb-Ph2Sb(CH2)3SbPh2}]BF4 which converts back to the monocarbonyl complex when the CO atmosphere is replaced with N2.     

Sn-centred icosahedral Rh carbonyl clusters: synthesis and structural characterization and 13C-{103Rh} HMQC NMR studies

The reaction of [Rh(7)(CO)(16)](3-) with SnCl(2).2H(2)O in a 1 : 1 molar ratio under N(2) results in the formation of the new heterometallic cluster, [Rh(12)Sn(CO)(27)](4-), in very high yield (ca. 86%). Further controlled additions of SnCl(2).2H(2)O, or solutions of HCl, or [RhCl(COD)](2), give [Rh(12)(micro-Cl)(2)Sn(CO)(23)](4-). Similarly, addition of HBr to [Rh(12)Sn(CO)(27)](4-) gives the related cluster [Rh(12)(micro-Br)(2)Sn(CO)(23)](4-). Notably, if the addition of SnCl(2).2H(2)O to [Rh(12)Sn(CO)(27)](4-) is carried out under a CO atmosphere, the reaction takes a different course and leads to the formation of the new cluster, [Rh(12)Sn(micro(3)-RhCl)(CO)(27)](4-). All the above clusters have been shown by single-crystal X-ray diffraction studies to have a metal framework based on an icosahedron, which is centred by the unique Sn atom. Their chemical reactivity and (13)C-{(103)Rh} HMQC NMR spectroscopic characterization are also reported.     

Synthesis and structural characterization of two novel heterometallic clusters: [Rh4Pt2(CO)11(dppm)2] and [Ru2Rh2Pt2(CO)12(dppm)2

Two novel heterometallic octahedral clusters [Rh(4)Pt(2)(CO)(11)(dppm)(2)](1) and [Ru(2)Rh(2)Pt(2)(CO)(12)(dppm)(2)](2) were synthesized by the reaction of [Rh(2)Pt(2)(CO)(6)(dppm)(2)] with [Rh(6)(CO)(14)(NCMe)(2)] and Ru(3)(CO)(12), respectively. Solid state structures of 1 and 2 have been established by a single crystal X-ray diffraction study. Two dppm ligands in 1 are bonded to one platinum and three rhodium atoms, which form an equatorial plane of the Rh(4)Pt(2) octahedron. Two rhodium and two platinum atoms bound to the diphosphine ligands in 2 are nonplanar to give an octahedral C2 symmetric Ru(2)Rh(2)Pt(2)(dppm)2 framework. The (31)P NMR investigation of and (1D, (31)P COSY, (31)P-[(103)Rh] HMQC) and simulation of 1D spectral patterns showed that in both clusters the structures of the M(6)(PP)(2) fragments found in the solid state are maintained in solution.     

Solid-state NMR and EXAFS spectroscopic characterization of polycrystalline copper(I) O,O'-dialkyldithiophosphate cluster compounds: Formation of copper(I) O,O'-diisobutyldithiophosphate compounds on the surface of synthetic chalcocite

A number of polycrystalline copper(I) O,O'-dialkyldithiophosphate cluster compounds with Cu4, Cu6, and Cu8 cores were synthesized and characterized by using extended X-ray absorption fine-structure (EXAFS) spectroscopy. The structural relationship of these compounds is discussed. The polycrystalline copper(I) O,O'-diisobutyldithiophosphate cluster compounds, [Cu8{S2P(OiBu)2}6(S)] and [Cu6{S2P(OiBu)2}6], were also characterized by using 31P CP/MAS NMR (CP = cross polarization, MAS = magic-angle spinning) and static 65Cu NMR spectroscopies (at different magnetic fields) and powder X-ray diffraction (XRD) analysis. Comparative analyses of the 31P chemical-shift tensor, and the 65Cu chemical shift and quadrupolar-splitting parameters, estimated from the experimental NMR spectra of the polycrystalline copper(I) cluster compounds, are presented. The adsorption mechanism of the potassium O,O'-diisobutyldithiophosphate collector, K[S2P(OiBu)2], at the surface of synthetic chalcocite (Cu2S) was studied by means of solid-state 31P CP/MAS NMR spectroscopy and scanning electron microscopy (SEM). 31P NMR resonance lines from collector-treated chalcocite surfaces were assigned to a mixture of [Cu8{S2P(OiBu)2}6(S)] and [Cu6{S2P(OiBu)2}6] compounds.     

B(C6F5)3 adducts of transition metal acyl compounds

The transition metal acyl compounds [Co(L)(CO)3(COMe)] (L = PMe3, PPhMe2, P(4-Me-C6H4)3, PPh3 and P(4-F-C6H4)3), [Mn(CO)5(COMe)] and [Mo(PPh3)(eta(5)-C5H5)(CO)2(COMe)] react with B(C6F5)3 to form the adducts [Co(L)(CO)3(C{OB(C6F5)3}Me)] (L = PMe3, 1, PPhMe2, 2, P(4-Me-C6H4)3, 3, PPh3, 4, P(4-F-C6H4)3), 5, [Mn(CO)5(C{OB(C6F5)3}Me)] 6 and [Mo(eta(5)-C5H5)(PPh3)(CO)2(C{OB(C6F5)3}Me)], 7. Addition of B(C6F5)3 to a cooled solution of [Mo(eta(5)-C5H5)(CO)3(Me)], under an atmosphere of CO gave [Mo(eta(5)-C5H5)(CO)3(C{OB(C6F5)3}Me)] 8. In the presence of adventitious water, the compound [Co{HOB(C6F5)3}2{OP(4-F-C6H4)3}2] 9, was formed from [Co(P(4-F-C6H4)3)(CO)3(C{OB(C6F5)3}Me)]. The compounds 4 and 9 have been structurally characterised. The use of B(C6F5)3 as a catalyst for the CO-induced migratory-insertion reaction in the transition metal alkyl compounds [Co(PPh3)(CO)3(Me)], [Mn(CO)5(Me)], [Mo(eta(5)-C5H5)(CO)3(Me)] and [Fe(eta(5)-C5H5)(CO)2(Me)] has been investigated.     

The electron-poor phosphines P{C6H3(CF3)2-3,5}3 and P(C6F5)3 do not mimic phosphites as ligands for hydroformylation. A comparison of the coordination chemistry of P{C6H3(CF3)2-3,5}3 and P(C6F5)3 and the unexpectedly low hydroformylation activity of their rhodium complexes

The fluoroaryl phosphines P{C6H3(CF3)2-3,5}3 (La) and P(C6F5)3 (Lb) form the complexes trans-[MCl2(La)2] and trans-[MCl2(Lb)2](M = Pd or Pt) which have been isolated and fully characterised. 31P NMR studies of competition experiments show that the stability of trans-[PdCl2L2] is in the order L = Lb< La 相似文献   

负载型水溶性铑膦配合物催化剂的结构和性能

SiO2担载TPPTS（间-三苯基膦三磺酸钠盐）－Rh（acac）（CO）2制成的负载型水溶性催化剂进行1-己烯氢甲酰化催化反应时，引入适量水蒸气可显著提高催化活性．用魔角旋转固体核磁共振磷谱表征得到，在新制备的催化剂中，吸附于SiO2表面但未参与配位的TPPTS，约占总膦物种的70mol％以上，而位于δ=32．4处的表面配合物｛Rh（CO）（TPPTS）2｝膦物种量约为15mol％，其它膦10mol％左右．催化剂经干燥合成气在373K处理2h、或经湿合成气在较低温度（333K）下处理2h后，｛Rh（CO）（TPPTS）2｝的增加量仅约为10～15mol％，其它膦物种的变化量也较小，但催化剂经湿合成气于373K处理2h后，｛Rh（CO）（TPPTS）2｝的净增量大于40mol％；在工作态催化剂中，也观察到｛Rh（CO）（TPPTS）2）大量生成、未配位TPPTS量减小；经43h反应运转后，催化剂活性下降，归属为｛Rh（CO）（TPPTS）2）的磷谱峰宽化，揭示有部份配合物解络、部分TPPTS被氧化成OTTPTS．本研究结果证实，适量水可促进催化剂中具氢甲酰化催化活性的铑膦物种形成，提高活性，但随反应进行，配合物将逐渐解络、膦配体逐渐被氧化，从而使催化剂逐渐失活．     

Synthesis, structural characterization, and ligand replacement reactions of gem-dithiolato-bridged rhodium and iridium complexes

The reaction of gem-dithiol compounds R 2C(SH) 2 (R = Bn (benzyl), (i) Pr; R 2 = -(CH 2) 4-) with dinuclear rhodium or iridium complexes containing basic ligands such as [M(mu-OH)(cod)] 2 and [M(mu-OMe)(cod)] 2, or the mononuclear [M(acac)(cod)] (M = Rh, Ir, cod = 1,5-cyclooctadiene) in the presence of a external base, afforded the dinuclear complexes [M 2(mu-S 2CR 2)(cod) 2] ( 1- 4). The monodeprotonation of 1,1-dimercaptocyclopentane gave the mononuclear complex [Rh(HS 2Cptn)(cod)] ( 5) that is a precursor for the dinuclear compound [Rh 2(mu-S 2Cptn)(cod) 2] ( 6). Carbonylation of the diolefin compounds gave the complexes [Rh 2(mu-S 2CR 2)(CO) 4] ( 7- 9), which reacted with P-donor ligands to stereoselectively produce the trans isomer of the disubstituted complexes [Rh 2(mu-S 2CR 2)(CO) 2(PR' 3) 2] (R' = Ph, Cy (cyclohexyl)) ( 10- 13) and [Rh 2(mu-S 2CBn 2)(CO) 2{P(OR') 3} 2] (R' = Me, Ph) ( 14- 15). The substitution process in [Rh 2(mu-S 2CBn 2)(CO) 4] ( 7) by P(OMe) 3 has been studied by spectroscopic means and the full series of substituted complexes [Rh 2(mu-S 2CBn 2)(CO) 4- n {P(OR) 3} n ] ( n = 1, 4) has been identified in solution. The cis complex [Rh 2(mu-S 2CBn 2)(CO) 2(mu-dppb)] ( 16) was obtained by reaction of 7 with the diphosphine dppb (1,4-bis(diphenylphosphino)butane). The molecular structures of the diolefinic dinuclear complexes [Rh 2(mu-S 2CR 2)(cod) 2] (R = Bn ( 1), (i) Pr ( 2); R 2 = -(CH 2) 4- ( 6)) and that of the cis complex 16 have been studied by X-ray diffraction.     

A non-closed tetranuclear metal cluster derivative of rhodium and iron: synthesis and molecular structure

The structure of one isomer of [Rh₃Fe{P(C₆H₅)₂}₃(CO)₈], synthesised by treatment of [ {Rh(CO)₂Cl} ₂] with [Fe(CO)₄ {P(C₆H₅)₂H} ] in the presence of a base, has been determined by single crystal X-ray diffration. This species rearranges in solution to a second isomer whose structure has been elucidated by ³¹P NMR spectral measurements. The reactions of these compounds with carbon monoxide are described.     

Study of the Bonding Modes of Di‐2‐pyridyl ketoxime Ligand towards Ruthenium,Rhodium and Iridium Half Sandwich Complexes

The bonding modes of the ligand di‐2‐pyridyl ketoxime towards half‐sandwich arene ruthenium, Cp*Rh and Cp*Ir complexes were investigated. Di‐2‐pyridyl ketoxime {pyC(py)NOH} react with metal precursor [Cp*IrCl₂]₂ to give cationic oxime complexes of the general formula [Cp*Ir{pyC(py)NOH}Cl]PF₆ ( 1a ) and [Cp*Ir{pyC(py)NOH}Cl]PF₆ ( 1b ), for which two coordination isomers were observed by NMR spectroscopy. The molecular structures of the complexes revealed that in the major isomer the oxime nitrogen and one of the pyridine nitrogen atoms are coordinated to the central iridium atom forming a five membered metallocycle, whereas in the minor isomer both the pyridine nitrogen atoms are coordinated to the iridium atom forming a six membered metallacyclic ring. Di‐2‐pyridyl ketoxime react with [(arene)MCl₂]₂ to form complexes bearing formula [(p‐cymene)Ru{pyC(py)NOH}Cl]PF₆ ( 2 ); [(benzene)Ru{pyC(py)NOH}Cl]PF₆ ( 3 ), and [Cp*Rh{pyC(py)NOH}Cl]PF₆ ( 4 ). In case of complex 3 the ligand coordinates to the metal by using oxime nitrogen and one of the pyridine nitrogen atoms, whereas in complex 4 both the pyridine nitrogen atoms are coordinated to the metal ion. The complexes were fully characterized by spectroscopic techniques.     

Photoreductive self-assembly from [Mo7O24]6- to carboxylates-coordinated {Mo142} Mo-blue nanoring in the presence of carboxylic acids

The primary steps of the photoredox reaction between [Mo7O24]6- and carboxylic acid electron (and proton) donors in aqueous solutions are investigated by the chemically induced dynamic electron spin polarization (CIDEP) spectroscopy. The excitation of the O-->Mo ligand-to-metal charge-transfer (LMCT) bands of [Mo7O24]6- in the presence of CH3CO2H induces the emissive electron spin polarization (ESP) of *CH2CO2 and *CH3 radicals with an accompanying formation of the one-electron reduced species [Mo7O23(OH)]6-, which is demonstrated by the triplet mechanism involving the O --> Mo LMCT triplet states. The prolonged photolysis of the solution containing [Mo7O24]6- and CH3CO2H at pH = 3.4 leads to the formation of the acetate/propionate-coordinated {Mo142} Mo-blue nanoring, [MoV28MoV(I)114O429H10(H2O)(49)(CH3)CO2 triple bond Ac5(C2H5CO2 triple bond Pr)]30- (1a) through the formation of the cis-configured dimeric dehydrative condensation to two-electron reduced Mo-blue [(Mo7O23)2]10- ({Mo14}). 1a is isolated as a [NH4]+/[Me3NH]+-mixed salt which is formulated as [NH4]27[Me3NH]3[Mo(V)28Mo(VI)114O429H10(H2O)49(CH3CO2)5(C2H5CO2)].150 +/- 10H2O (1) by results of elementary analysis, single-crystal X-ray analysis, 1H NMR, IR, and UV/Vis measurements, and manganometric redox titration. Based on the building-block sequence of for 1a, the bottom-up processes from [Mo7O24]6- to the {Mo142} ring in the coexistence of beta-[Mo8O26]4- are discussed by (i) the stabilization of the molecular curvature of {Mo14} through both the intramolecular transfer of monomolybdates and the intermolecular transfer of monomolybdates as degradation fragments of beta-[Mo8O26]4-, to yield {Mo21} and {Mo20} building blocks, (ii) the outer-ring formation resulting from seven successive two-electron-photoreductive condensations among {Mo21} and {Mo20}, and (iii) inner-ring formation resulting from eight successive dehydrative condensations between monomolybdate linkers attached to the neighboring head Mo sites.     

Iridium-iron-monocarborane clusters from oxidative insertion reactions of [IrCl(CO)(PPh3)2] with ferracarborane anions

The nine-vertex ferracarborane salt [N(PPh3)2][7,7,7-(CO)3-closo-7,1-FeCB7H8] (1) reacts with an excess of [IrCl(CO)(PPh3)2] in the presence of Tl[PF6] to form, successively, the bimetallic species [7,7,9,9,9-(CO)5-7-PPh3-closo-7,9,1-IrFeCB6H7] (3), in which one {BH}- vertex has formally been subrogated by an {Ir(CO)2(PPh3)} unit, and the trimetallic complex [6,7,9-{Ir(CO)(PPh3)2}-7,9-(mu-H)2-7,9,9-(CO)3-7-PPh3-closo-7,9,1-IrFeCB6H6] (5), which contains an {FeIr2} triangle. The {FeIrCB6} core in 5 resembles that in 3 with, in addition, the Fe...Ir connectivity being spanned by an {Ir(CO)(PPh3)2} fragment and the consequent Fe-Ir and Ir-Ir bonds bridged by hydrido ligands. In contrast to the above, treatment of the 10-vertex diferracarborane salt [N(PPh3)2][6,6,6,10,10,10-(CO)6-closo-6,10, 1-Fe2CB7H8] (2) with the same reagents yields two very different, trimetallic complexes, namely [8,10-{Ir(mu-PPh2)(Ph)(CO)(PPh3)}-8-(mu-H)-6,6,6,10,10-( CO)5-closo-6,10,1-Fe2CB7H7] (6) and [6,7,10-{Fe(CO)3}-6-(mu-H)-6,10,10,10-(CO)4-6-PPh3-closo-6,10,1-IrFeCB7H7] (7). In 6, an exo-polyhedral {IrPh(CO)(PPh3)} moiety is attached to a {closo-6,10,1-Fe2CB7} framework via a PPh2-bridged Fe-Ir bond and a B-HIr agostic-type linkage, the iridium center formally having inserted into one P-Ph bond of a PPh3 unit. Complex 7 contains an {IrFeCB7} cluster core, with an exo-polyhedral {Fe(CO)3} moiety bridging a {BIrFe} triangular face and with an additional Ir-H-Fe bridge. However, this metal atom arrangement reveals that iridium and iron moieties have exchanged exo- and endo-polyhedral sites with respect to the 10-vertex metallacarborane. X-ray diffraction studies upon 3, 5, 6, and 7 confirmed their novel structural features; some preliminary reactivity studies upon these compounds are also reported.     

The synthesis,structure and reactivity of new tetra- and pentacoordinated rhodium(I) complexes

Summary Tetracoordinated complexes of the [Rh{P(OPh)₃}₃X] type (X=N₃, NO₂ or NCS) were obtained in the reaction of [Rh{P(OPh)₃}₃Cl] with NaX. Pentacoordinated [Rh{P(OPh)₃}₄X] complexes (X=HSO₄, H₂PO₄, MeCO₂, HCO₂ or ClO₄) were prepared by treating [Rh{P(OPh)₃}₃ {P(OC₆H₄)(OPh)₂}] or [Rh(acac) {P(OPh)₃}₂]+P(OPh)₃ (Hacac=acetylacetone) with acids HX.The groups of complex differ in reactivity towards CO and H₂; [Rh{P(OPh)₃}₃X] complexes do not react with dihydrogen and with CO they produce [Rh{P(OPh)₃}₂(CO)X]. The [Rh{P(OPh)₃}₄X] complexes take up H₂ reversibly, and with CO they give [Rh{P(OPh)₃}₃(CO)₂X] compounds.     

Chelate and pincer carbene complexes of rhodium and platinum derived from hexaphenylcarbodiphosphorane, Ph3P=C=PPh3

The reaction of [(cod)RhCl]2 with Ph3P=C=PPh3 (1) gave the bidentate Rh(I) carbene complex, (cod)Rh[eta2-C{P(C6H4)Ph2}{PPh3}] (2), in which one of the Ph groups in 1 underwent orthometalation to form the chelate. Displacement of cod by 2 equiv of PMe3 transformed 2, via a second orthometalation event, into the Rh(III) C,C,C pincer carbene complex, HRh(PMe3)2[eta3-C{P(C6H4)Ph2}2] (3). The reaction of [Me2Pt(SMe2)]2 with 1 led directly to the analogous C,C,C pincer carbene complex of Pt(II), (Me2S)Pt[eta3-C{P(C6H4)Ph2}2] (4). DFT calculations on a model form of 3 suggest a net single sigma-bonding interaction between Rh and an sp2-hybridized carbene center, with a HOMO that is predominantly carbene pz in character.     

Oxidative addition of different electrophiles with rhodium(I) carbonyl complexes of unsymmetrical phosphine–phosphine monoselenide ligands

Dimeric chlorobridge complex [Rh(CO)₂Cl]₂ reacts with two equivalents of a series of unsymmetrical phosphine–phosphine monoselenide ligands, Ph₂P(CH₂)_nP(Se)Ph₂ {n = 1( a ), 2( b ), 3( c ), 4( d )}to form chelate complex [Rh(CO)Cl(P∩Se)] ( 1a ) {P∩Se = η²‐(P,Se) coordinated} and non‐chelate complexes [Rh(CO)₂Cl(P～Se)] ( 1b–d ) {P～Se = η¹‐(P) coordinated}. The complexes 1 undergo oxidative addition reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to produce Rh(III) complexes of the type [Rh(COR)ClX(P∩Se)] {where R = ? C₂H₅ ( 2a ), X = I; R = ? CH₂C₆H₅ ( 3a ), X = Cl}, [Rh(CO)ClI₂(P∩Se)] ( 4a ), [Rh(CO)(COCH₃)ClI(P～Se)] ( 5b–d ), [Rh(CO)(COH₅)ClI‐(P～Se)] ( 6b–d ), [Rh(CO)(COCH₂C₆H₅)Cl₂(P～Se)] ( 7b–d ) and [Rh(CO)ClI₂(P～Se)] ( 8b–d ). The kinetic study of the oxidative addition (OA) reactions of the complexes 1 with CH₃I and C₂H₅I reveals a single stage kinetics. The rate of OA of the complexes varies with the length of the ligand backbone and follows the order 1a > 1b > 1c > 1d . The CH₃I reacts with the different complexes at a rate 10–100 times faster than the C₂H₅I. The catalytic activity of complexes 1b–d for carbonylation of methanol is evaluated and a higher turnover number (TON) is obtained compared with that of the well‐known commercial species [Rh(CO)₂I₂]^?. Copyright © 2006 John Wiley & Sons, Ltd.     

Complexes with a Metal-Phosphorus Triple Bond as Versatile Building Blocks in Coordination and Organometallic Chemistry

Trapping reactions of the phosphido complex intermediate [Cp*(CO) 2 W L P M W(CO) 5 ], generated by thermolysis of [Cp*P{W(CO) 5 } 2 ] 1 , occur via [2 + 2] cycloaddition reactions with P 4 , phosphaalkynes, alkynes, and [CpMo(CO) 2 ] 2 , respectively. However, with nitriles, insertion reactions into the P--C bond of 1 are observed already at room temperature to give novel P-containing heterocycles. Furthermore, irradiation of 1 gives the tetrahedral complex [Cp*(CO) 6 W 2 }( w -H)( w , m 2 -P 2 ){W(CO) 5 } 2 ], which indicates that besides the formation of the triple-bond intermediate [Cp*(CO) 2 W L P M W(CO) 5 ] a second Cp* elimination intermediate of the type [P{W(CO) 5 } 2 ] occurs.     

Iron(0), rhodium(I) and palladium(II) complexes with p‐(N,N‐dimethylaminophenyl) diphenylphosphine and the application of the palladium complex as a catalyst for the Suzuki–Miyaura cross‐coupling reaction

The reaction of p‐(N,N‐dimethylaminophenyl)diphenylphosphine [PPh₂(p‐C₆H₄NMe₂)] with [Fe₃(CO)₁₂], [Rh(CO)₂Cl]₂ and PdCl₂ resulted in three new mononuclear complexes, {Fe(CO)₄[η¹‐(P)‐PPh₂(p‐C₆H₄NMe₂)]} ( 1a ), trans‐{Rh(CO)Cl[η¹‐(P)‐PPh₂(p‐C₆H₄NMe₂)]₂} ( 2 ) and trans‐{PdCl₂[η¹‐(P)‐PPh₂(p‐C₆H₄NMe₂)]₂} ( 3 ), respectively. A small amount of dinuclear nonmetal‐metal bonded complex, {Fe₂(CO)₈[µ‐(P,N)‐PPh₂(p‐C₆H₄NMe₂)]} ( 1b ), was also isolated as a side product in the reaction of [Fe₃(CO)₁₂]. The complexes were characterized by elemental analyses, mass, IR, UV–vis, ¹H, ¹³C (except 1b) and ³¹P{¹H} NMR spectroscopy. The Pd complex 3 effectively catalyzes the Suzuki–Miyaura cross‐coupling reactions of aryl halides with arylboronic acids in water–isopropanol (1:1) at room temperature. Excellent yields (up to 99% isolated yield) were achieved. The effects of different solvents, bases, catalyst quantities were also evaluated. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and structural characterization of a series of high-hydride content osmium-rhodium carbonyl complexes by the hydrogenation of arene-coordinated clusters

The reaction of [Os3Rh(mu-H)3(CO)12] with an excess amount of 4-vinylphenol (as hydride acceptor) in refluxing m-xylene, chlorobenzene or benzene yielded the three new clusters [Os5Rh2(mu-CO){eta6-C6H4(CH3)2}(CO)16] 1, [Os5Rh2(mu-CO)(eta6-C6H5Cl)(CO)16] 2 and [Os5Rh2(mu-CO)(eta6-C6H6)(CO)16] 3. The treatment of [Os3Rh(mu-H)3(CO)12] 4 in refluxing toluene with an excess amount of 4-vinylphenol afforded a new complex, [Os4Rh(mu-H)(eta6-C6H5CH3)(CO)12], which was isolated as a brown complex in 20% yield together with two known compounds, [Os5Rh2(eta6-C6H5CH3)(mu-CO)(CO)16] in 10% yield and [Os3Rh4(mu3-eta1:eta1:eta1-C6H5CH3)(CO)13] in 5% yield. Complexes 1-4 were fully characterized by IR, 1H NMR spectroscopy, mass spectroscopy, elemental analysis and X-ray crystallography. The molecular structures of compounds 1-3 are isomorphous, and only differ in the arene-derivatives that attach to the same metal core. Their metal cores can be viewed as a monocapped octahedral, in which an osmium atom caps one of the Os-Os-Os triangular faces of the Os4Rh2 metal framework. Complex 4 has a trigonal-bipyramidal metal core with a C6H5Me ligand that is terminally bound to the Rh atom that lies in the trigonal plane of the metal core. The hydrogenation of [Os5Rh2(eta6-C6H5CH3)(mu-CO)(CO)16] with [Os3(mu-H)2(CO)10] in chloroform under reflux resulted in two hydrogen-rich compounds: [Os7Rh3(mu-H)11(CO)23] 5 and [Os5Rh3Cl(mu-H)8(CO)18] 6, both in moderate yields. The reaction of [Os5Rh2(eta6-C6H5CH3)(mu-CO)(CO)16] with hydrogen in refluxing chloroform yielded a new cluster compound, [Os5Rh(mu-H)5(CO)18] 7, in 20% yield, together with a known osmium-rhodium cluster, [Os6Rh(mu-H)7(mu-CO)(CO)18], as a major compound. Clusters 5, 6, and 7 have been fully characterized by both spectroscopic and crystallographic methods. Additionally, a deuterium-exchange experiment was performed on [Os7Rh3(mu-H)11(CO)23] 5 and [Os5Rh3Cl(mu-H)8(CO)18] 6. Both the compounds proved to be able to exchange the H atom with D in the presence of D2SO4, and the absence of the hydride signal in the 1H NMR spectrum is consistent with this. Therefore, clusters 5 and 6 may serve as appropriate new hydrogen storage models.