Syntheses of Bissydnone Derivatives and Studies of Their Biological Activities

A new method to prepare 3,3′-ethylenebissydnone (40%), 3,3′-tetramethylenebissydnone (37%) and 3,3′-hexamethylenebissydnone (43%) from the corresponding alkylene diamine with paraformaldehyde and potassium cyanide were investigated. Some new bissydone: ?3,3′-trimethylenebissydnone (6%), 3,3′-(4,4′-diphenyl)bissydnonylmethane (9%) and 3,3′-(4,4′-diphenyi)bissydnonyl ether (28%) were synthesized from the corresponding diamine, paraformaldehyde, sodium bisulfite and potassium cyanide. Biological test of 3,3′-(4,4′-diphenyl)bissydnonylmethane shows significant response for coronary dilgtion test, inhibition of collagen induced platelet aggregation and moderate carditropic response. 3,3′-(4,4′-Diphenyl)bissydnonyl ether also shows inhibition of collagen induced platelet aggregation and moderate carditropic response.     

Synthesis of 3,3-dinitroazetidine from 1-t-butyl-3,3-dinitroazetidine

Treatment of 1-t-butyl-3,3-dinitroazetidine (1) with benzyl chloroformate resulted in a novel elimination of isobutylene to yield equimolar amounts of 1-(benzyloxycarbonyl)-3,3-dinitroazetidine (3) and 1-t-butyl-3,3-dinitroazetidine hydrochloride. The carbamate 3 was effectively cleaved by trifluoromethanesulfonic acid to yield 3,3-dinitroazetidinium trifluoromethanesulfonate (4) . Free 3,3-dinitroazetidine (5) has also been isolated.     

Simple and efficient methods of synthesis of 3,3-diarylcyclobutanone and 3,3-diarylcyclobutylamine derivatives using the TiCl4/R3N reagent system

[reaction: see text] The iminium ions generated in situ by the oxidation of N,N-diisopropyl-N-benzylamine using iodine react with diaryl ketones in the presence of TiCl4/R3N to give the corresponding 3,3-diarylcyclobutanones in moderate to good yields (49-86%). The 3,3-diarylcyclobutanone iminium ions formed in this transformation was reduced in situ with B2H6 to produce the corresponding 3,3-diarylcyclobutylamines (52-79% yields), a class of compounds with potential antidepressant activity. In addition, a series of N,N-dimethyl-3,3-diarylcyclobutylamines were synthesized by the reductive amination of the corresponding 3,3-diarylcyclobutanone derivatives.     

Unsaturated acids containing trifluoromethyl groups

Summary The addition of water, ammonia, and piperidine to 3,3-bistrifluoromethylacrylic acid and its ester was carried out and led to the formation of 2-substituted 3,3-bistrifluoromethylpropionic acids. This indicates that the polarization of the double bond in 3,3-bistrifluoromethylacrylic acid is in the reverse direction to that in trifluorocrotonic acid.     

Method for the determination of three toxic non-ortho chlorine substituted coplanar PCBs in environmental samples at part-per-trillion levels

A method has been devised combining alkali digestion, carbon chromatography and high-resolution gas chromatography for the determination of 3,3',4,4'-tetra, 3,3',4,4',5-penta, and 3,3',4,4',5,5'-hexachlorobiphenyl, the biologically active congeners of PCBs and approximate isostereomers of 2,3,7,8-TCDD. This method permits determinations of parts-per-trillion levels of these toxic residues in biological samples. Interference both from biogenic and from xenobiotic substances was reduced to extremely low levels. Using this method, 13.5 ng of 3,3'4,4'-tetrachlorobiphenyl/g, 0.89 ng of 3,3'4,4',5-pentachlorobiphenyl/g and 0.64 ng of 3,3',4,4'5,5'-hexachlorobiphenyl/g were detected on wet weight basis in the blubber of a finless porpoise. To our knowledge this is the first report on the three toxic non-ortho chlorine substituted PCB residues detected in a higher mammal in the wilderness.     

Synthesis,curing, and decomposition of allylamine-adducted 3,3′-bismaleimidodiphenylsulphone resins

A series of 3,3′-bismaleimidodiphenylsulphone/allylamine (3,3′-BDS/A) adducts were prepared by reacting 3,3′-BDS with various molar percentages of allylamine (A). The reaction path, revealed by a model compound study of n-phenylmaleimide reacting with allylamine, indicates that the imido ring of 3,3′-BDS was opened by allylamine resulting in the formation of two amido groups. The infrared and mass spectra of curing 3,3′-BDS/A adducts indicate that the allylamino groups cleaved with the recovery of imido ring of 3,3′-BDS and then participated in the cure reactions. The cure reaction paths depend on the amount of allylamino groups in the 3,3′-BDS/A adducts. When it is in a small amount, the cleaved allylamines will accelerate the homopolymerization of 3,3′-BDS through the maleimide double bonds. When allylamino groups are plentiful, the cleaved allylamines might polymerize by themselves through the allyl groups. A decomposition mechanism of 3,3′-BDS/A adducts was suggested by mass spectra. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2469–2478, 1997     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene. I. 3,3-Dimethyl-1,2-bis(tert-butyl)cyclopropene

The geometrical parameters of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene were optimised completely at the HF/6-31G* level. The HF/6-31G*//HF/6-31G* force field was calculated and scaled using Pulay's scaling procedure. The set of 17 scale factors (for a 105-dimensional problem) was compiled from the sets obtained previously for 3,3-dimethyl-1-butene and 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The vibrational problem was solved using the scaled quantum mechanical force field (QMFF) and assignments of the vibrational frequencies of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene were considered in comparison with the known assignments of 3,3-dimethyl-1-butene and 3,3-dimethylcyclopropene. Assignments of four experimental IR bands of 3,3-dimethyl-1,2-bis(tert-butyl)cyclopropene given in the literature are suggested.     

A new route to 2,2′,3,3′-tetrasubstituted binaphthyls

Based on an ortho-lithiation protocol of 2,2′-dibromo-1,1′-binaphthyl four tetrasubstituted binaphthyls, 2,2′-dibromo-3,3′-diiodo-, 3,3′-dibromo-2,2′-diiodo-, 2,2′,3,3′-tetrabromo-, and 2,2′,3,3′-tetraiodo-1,1′-binaphthyls have been prepared in excellent yield which in turn proved to be versatile key intermediates in the synthesis of various 2,2′,3,3′-tetrasubstituted 1,1′-binaphthyl derivatives.     

Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

Synthesis of chiral 3,3′-disubstituted 1,1′-binaphthyl-2,2′-disulfonic acids

A convenient synthesis of chiral 3,3′-disubstituted 1,1′-binaphthyl-2,2′-disulfonic acids (BINSA, 1) was developed. The key was directed ortho-lithiation of BINSA methyl ester 2 with n-BuLi and subsequent reaction with an electrophile. Electrophiles such as Br₂, I₂, Me₃SiOTf, and i-PrOB(Pin) reacted smoothly with 3,3′-dilithiated BINSA methyl ester, and the corresponding 3,3′-dihalo-, 3,3′-bis(trimethylsilyl)-, and 3,3′-diboryl-BINSA derivatives were obtained in yields of 21–78%. This simple synthetic method is highly attractive since the ability to prepare 3,3′-disubstituted BINOLs in advance can be useful.     

New atropisomeric N-N ligands for CO/vinyl arene copolymerization reaction

New atropisomeric bidentate bipyridine-based ligands (3,3'-(ethylenedioxy)-2,2'-bipyridine 4; 3,3'-(propylenedioxy)-2,2'-bipyridine 4; 3,3'-(butylenedioxy)-2,2'-bipyridine 5) containing a bridge between the 3,3' positions of the aromatic rings have been prepared. Together with the previously reported analogous ligands ((R)-3,3'-(1-methylethylenedioxy)-2,2'-bipyridine) 1and ((S,S)-3,3'-(1,2-dimethylethylenedioxy)-2,2'-bipyridine) 2, they were used to synthesize the corresponding bis-chelated dicationic complexes [Pd(N-N)2][PF6]2. Crystal structures and comparison of the data obtained by X-ray analysis on four of these complexes is reported. These palladium compounds were used as precatalysts in the CO/styrene and CO/4-Me-styrene copolymerization reactions, where they showed that small variations in the ligand backbone remarkably affects the productivity of the catalytic system.     

Synthesis of new 3,3-dimethoxyazetidine-2-carboxylic acid derivatives

Cyclization of γ-amino-α-bromocarboxylic esters resulted in an efficient synthesis of new 3,3-dimethoxyazetidine-2-carboxylates, that is, methyl N-t-butyl-3,3-dimethoxyazetidine-2-carboxylic ester and 3,3-dimethoxyazetidine-2-carboxylic acid, or 3-bromo-4,4-dimethoxypyrrolidin-2-ones, depending on the substituent at nitrogen. Reduction of the 3,3-dimethoxyazetidine-2-carboxylates gave the corresponding 3,3-dimethoxy-2-(hydroxymethyl)azetidines. These novel cyclic amino acid derivatives, available on multigram scale, have a suitably protected carbonyl function at the 3-position, which enables further functionalization.     

Differentiation of diiodothyronines using electrospray ionization tandem mass spectrometry

Diiodothyronines 3,5-diiodothyronine (3,5-T2), 3',5'-diiodothyronine (3',5'-T2), and 3,3'-diiodothyronine (3,3'-T2) are important metabolites of 3,5,3'-triiodothyronine (T3) and 3,3',5'-triiodothyronine (rT3; reverse T3). In this paper, a novel and rapid method for identifying and quantifying 3,5-T2, 3',5'-T2 and 3,3'-T2 has been introduced using electrospray ionization tandem mass spectrometry (ESI-MS/MS). Fragmentation patterns were proposed on the basis of our data obtained by ESI-MS/MS. MS2 spectra in either negative ionization mode or positive ionization mode can be used to differentiate 3,5-T2, 3',5'-T2 and 3,3'-T2. On the basis of the relative abundance of fragment ions in MS2 spectra under the positive ionization mode, quantification of the 3,5-T2, 3',5'-T2 and 3,3'-T2 isomers in mixtures is also achieved without prior separation.     

Selective defluorination approach to N-Cbz-3,3-difluoro-2-difluoromethylenepyrrolidine and its application to 3,3-difluoroproline dipeptide synthesis

Mg-promoted defluorination of N-(p-methoxyphenyl)bis(trifluoromethyl)imine 1 gave perfluoroenamine 2, which was readily transformed to N-Cbz-2-trifluoromethyl-3,3-difluoropyrrolidine 10. Chemoselective defluorination from the trifluoromethyl group of 10 by LHMDS-promoted dehydrofluorination in THF provided 3,3-difluoro-2-difluoromethylenepyrrolidine 11. The product 11 was converted to 3,3-difluoroproline dipeptides 16 upon treatment with aminoesters.     

Synthesis and characterization of N-bromoacetyl-3,3',5-triiodo-L-thyronine

N-Bromoacetyl-3,3',5-triiodo-L-thyronine and carrier-free [3'-125I]-N-bromoacetyl-3,3',5-triiodo-L-thyronine, to be used for affinity labeling of thyroid hormone receptors, were synthesized using a one-step procedure: a solution of the thyroid hormone 3,3',5-triiodo-L-thyronine and bromoacetyl bromide in ethyl acetate was refluxed for an optimal period of time which depends on the amount of hormone processed. The bromoacetylated hormone thus obtained was then fractionated by high-speed counter-current chromatography which yielded N-bromoacetyl-3,3',5-triiodo-L-thyronine that was pure by the criteria of high-performance liquid chromatography and thin-layer chromatography with different solvent systems. The pure product was well separated from all contaminants including one which in high-performance liquid chromatography was not easily separated from N-bromoacetyl-3,3',5-triiodo-L-thyronine. The latter was characterized by 1H nuclear magnetic resonance, plasma desorption mass spectrometry, thin-layer chromatography, high-performance liquid chromatography, UV spectrophotometry, and melting point. Amounts of 3,3',5-triiodo-L-thyronine ranging from picograms, including carrier-free 125I-labeled triiodothyronine, to 200 to 300 mg can be processed with the equipment used in the present investigation.     

Polyaddition reactions of bisethyleneureas and 1,1,3,3-diethyleneurea with polymethylene dimercaptans in LiCl-dimethylformamide

Polyaddition reactions of 1,1′-tetramethylenebis(3,3-ethyleneurea) (IIa), 1,1′-octamethylenebis(3,3-ethyleneurea) (IIb), 1,1′-p-phenylenebis(3,3-ethyleneurea) (IIc), 1,1′-(4,4′-diphenylmethane)bis(3,3-ethyleneurea) (IId) and 1,1,3,3-diethyleneurea (III) with polymethylene dimercaptans were investigated. 1,1′-Polymethylenebis(3,3-ethyleneureas) and polymethylene dimercaptans successfully reacted at 80–95°C. in the presence of triethylamine to give poly(urea sulfides) with intrinsic viscosities up to 1.1 in about 90% yield when dimethylformamide, dimethylacetamide, or N-methyl-2-pyrrolidone containing lithium chloride as a solvent were used. The other ethyleneureas, however, failed to give high molecular weight polymers.     

The relationship between the structures of semi-rigid homo- and copolyesters based on 5,5'-diphenyl-2,2'-bis(1,3,4-thiadiazole)s and their liquid crystalline and optical properties

New semi-rigid homo- and copolyesters composed of the quaterphenyl analogue of 2,2'-bis(1,3,4-thiadiazole) (BTD), 5,5'-diphenyl-2,2'-bis(1,3,4-thiadiazole) (DBTD), were prepared by high temprature solution polycondensation of monomers, 3,3'- and 4,4'-dioxydiundecanol derivatives of DBTD with four dimethyl esters, and their liquid crystalline (LC) and optical properties were investigated. DSC measurements, texture observations using a polarizing microscope equipped with a hot stage, and powder X-ray diffraction showed that the homopolymers containing the 4,4'-DBTD unit form more stable LC phases than those having the 3,3'-DBTD unit. The 4,4'-DBTD-containing polymers and the 3,3'-DBTD unit-poor copolymers, except for the 3,3'-DBTD unit-rich copolymers and the 3,3'-DBTD-containing homopolymers (which formed highly ordered smectic or crystal mesophases), displayed a thermotropic LC smectic C phase. Solution and solid state UV-vis and photoluminescent (PL) spectra showed that the polyesters display miximum absorbances and bluish-green or blue emission based on the DBTD unit, where the Stokes shifts were observed. The peak positions in the UV-vis and the PL spectra of homopolymers composed of the 4,4'-DBTD unit were at higher wavelengths than those in the corresponding 3,3'-DBTD-containing homopolymers, due to its more conjugated structure. In the copolymers the peak maxima were shifted to shorter wavelengths with the increase of 3,3'-DBTD content.     

The Behavior of 3,3-Diphenylindan-1,2-dione Towards Alkyl Phosphites

The reaction of 3,3-diphenylindan-1,2-dione with trimethyl phosphite in dry benzene at room temperature for about 15 h led to the formation of a mixture containing dimethyl (3,3-diphenyl-2-methoxy-1-indenyl)phosphate and dimethyl (3,3-diphenyl-1H-2-oxo-1-indanyl)phosphate, whereas with triisopropyl phosphite, diisopropyl (3,3-diphenyl-2-isopropoxy-1-indenyl)phosphate is the only product. Treatment of the dione with dialkyl phosphites under different experimental conditions gave dialkyl (3,3-diphenyl-1-hydroxy-2-oxo-1-indanyl)phosphates. Reaction mechanisms are presented which account for the experimental results. Structural assignments of the new compounds are based on the spectroscopic evidences and two examples were elucidated by X-ray crystallography.     

Cyclisation of benzils

Treatment of several substituted benzils [3,3′- and 4,4′-dimethyl-; 2,2′-, 3,3′- and 4,4′-dichloro-; 3,3′-dibromo-; 4-(N,N-dimethylamino)-] with an excess of chlorosulfonic acid gave the corresponding 3-chloro-2-phenylbenzofuran disulfonyl dichlorides. Disubstitution was confirmed by microanalytical and spectral data for the corresponding bis(N,N-dimethylaminsulfonamides). The positions of electrophilic substitution were not confirmed with 3,3′-dimethyl-, 2,2′- and 3,3′-dichlorobenzils. With 4,4′-dichlorobenzil, a smaller amount of chlorosulfonic acid enabled the isolation of 3,6,4′-trichloro-2-phenylbenzofuran-5-sulfonyl chloride, which was identified by X-ray analysis of the N,N-dimethylsulfonamide. The cyclisation failed with 3,3′-dimethoxy-, and 3,3′- and 4,4′-dinitrobenzils. The results have been interpreted mechanistically.     

The Behavior of 3,3-Diphenylindan-1,2-dione Towards Alkyl Phosphites

Summary. The reaction of 3,3-diphenylindan-1,2-dione with trimethyl phosphite in dry benzene at room temperature for about 15 h led to the formation of a mixture containing dimethyl (3,3-diphenyl-2-methoxy-1-indenyl)phosphate and dimethyl (3,3-diphenyl-1H-2-oxo-1-indanyl)phosphate, whereas with triisopropyl phosphite, diisopropyl (3,3-diphenyl-2-isopropoxy-1-indenyl)phosphate is the only product. Treatment of the dione with dialkyl phosphites under different experimental conditions gave dialkyl (3,3-diphenyl-1-hydroxy-2-oxo-1-indanyl)phosphates. Reaction mechanisms are presented which account for the experimental results. Structural assignments of the new compounds are based on the spectroscopic evidences and two examples were elucidated by X-ray crystallography.