Analysis of sulfamerazine in pond water and several fishes by high-performance liquid chromatography using molecularly imprinted solid-phase extraction

The synthesis and evaluation of a molecularly imprinted polymer (MIP) used as a selective solid-phase extraction sorbent and coupled to high-performance liquid chromatography (HPLC) for the efficient determination of sulfamerazine (SMR) in pond water and three fishes are reported. The polymer was prepared using SMR as the template molecule, methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the crosslinking monomer in the presence of tetrahydrofuran as the solvent. The SMR-imprinted polymers and nonimprinted polymers were characterized by FT-IR and static adsorption experiments. The prepared SMR-imprinted material showed a high adsorption capacity, significant selectivity and good site accessibility. The maximum static adsorption capacities of the SMR-imprinted and nonimprinted materials for SMR were 108.8 and 79.6 mg g⁻¹, respectively. The relative selectivity factor of this SMR-imprinted material was 1.6. Several parameters influencing the solid-phase extraction process were optimized. Finally, the SMR-imprinted polymers were used as the sorbent in solid-phase extraction to determine SMR in pond water and three fishes with satisfactory recovery. The average recoveries of the MIP-SPE method were 94.0% in ultrapure water and 95.8% in pond water. Relative standard deviations ranging from 0.3% to 5.2% in MIP were acquired. The results for the SMR concentrations in crucian, carp and wuchang fish were 66.0, 127.1 and 51.5 ng g⁻¹, respectively. The RSDs (n = 5) were 3.51%, 0.53% and 5.08%, respectively. The limit of detection (LOD) for SMR was 1 ng g⁻¹ and the limit of quantitation (LOQ) was 3.5 ng g⁻¹.     

Preconcentration of trace aluminum (III) ion using a nanometer-sized TiO2-silica composite modified with 4-aminophenylarsonic acid, and its determination by ICP-OES

We describe a nanometer sized composite material made from titanium dioxide and silica that was chemically modified with 4-aminophenylarsonic acid and used for selective solid-phase extraction, separation and preconcentration of of aluminum(III) prior to its determination by ICP-OES. Under optimized conditions, the static adsorption capacity is 56.58?mg?g^?1, the enrichment factor is 150, the relative standard deviation is 1.6% (for n?=?11), and the detection limit (3?s) is 60?pg?mL^?1. The method was validated by analyzing the reference materials GBW 09101 (hair) and GBW 10024 (scallop) and successfully applied to the determination of trace Al(III) in spiked water samples and human urine, with recoveries ranging from 96% to 101%.

Dispersive Solid-Phase Extraction of Rhodium from Water,Street Dust,and Catalytic Converters Using a Cellulose–Graphite Oxide Composite

A cellulose–graphite oxide composite was synthesized and characterized as an adsorbent for dispersive solid-phase extraction of rhodium from various samples before atomic absorption detection. The pH, adsorbent volume, centrifugation time and rate, eluent concentration, volume and type, adsorption and elution contact time, sample volume, and matrix interferences were optimized. The developed method is simple, rapid, and inexpensive. The tolerance limits for rhodium were 10,000?mg?L^?1 sodium, 25,000?mg?L^?1 potassium, 10,000?mg?L^?1 magnesium, and 20,000?mg?L^?1 calcium. The recovery for rhodium exceeded 95%. Elution was performed with 10?mL of 2.5?mol?L^?1 H₂SO₄. The adsorption and elution contact times were 30 and 60?s, respectively. The detection limit of the method for rhodium was 5.4?µg?L^?1 and the precision as the relative standard deviation was 1.6%. A certified reference material 2556 (used auto catalyst pellets) and fortified samples were analyzed to evaluate the accuracy of the method. The optimized method was used for the preconcentration of rhodium from tap water, well water, wastewater, seawater, catalytic converters, and street dust.     

Ability of a salivary intrinsically unstructured protein to bind different tannin targets revealed by mass spectrometry

Superporous monolithic hydrogels (cryogel monoliths) are elastic, sponge-like materials that can be prepared in an aqueous medium through a cryotropic gelation technique. These monoliths show interesting properties for the development of high-throughput solid-phase extraction supports to treat large volumes of aqueous samples. In this work, a cryogel-supported molecularly imprinted solid-phase extraction approach for the endocrine disruptor bisphenol A (BPA) from river water and wine samples is presented. An imprinted polymer with molecular recognition properties for BPA was prepared in acetonitrile by thermal polymerization of a mixture of 4,4′-dihydroxy-2,2-diphenyl-1,1,1,3,3,3-trifluoropropane as a mimic template of BPA, 4-vinylpyridine and trimethylolpropane trimethacrylate in a molar ratio of 1 + 6 + 6. Fine imprinted particles (<10 μm) were embedded in a poly-acrylamide-co-N,N′-methylenbisacrylamide cryogel obtained by ammonium persulfate-induced cryopolymerization at −18 °C. The resulting monolithic gel was evaluated for its use as a sorbent support in an off-line solid-phase extraction approach to recover BPA from dilute aqueous samples with minimum pre-loading work-up. The optimized extraction protocol resulted in a reliable MISPE method suitable to selectively extract and preconcentrate BPA from river water and red wine samples, demonstrating the practical feasibility of cryogel-trapped imprinted polymers as solid-phase extraction materials     

Activated carbon modified with 4-(8-hydroxyquinoline-azo)benzamidine for selective solid-phase extraction and preconcentration of trace lead from environmental samples

Activated carbon was chemically modified with 4-(8-hydroxyquinoline-azo)benzamidine and used for separation and preconcentration of trace amounts of Pb(II) in environmental samples by solid-phase extraction prior to the measurement by inductively coupled plasma atomic emission spectrometry. The effects of pH, shaking time, eluent concentration and volume, sample flow rate and potential interfering ions were studied. Under the optimum conditions, the enrichment factor was 100, the detection limits (3ó) is 0.43 ng?mL^?1, and the relative standard deviations are <2.1% (n?=?8). The adsorption capacity of the sorbent is 53.58 mg of lead(II) per gram of the material. The sorbent was successfully applied to the preconcentration of trace Pb(II) in the reference materials GBW 08301 (river sediment) and GBW 08302 (Tibet soil). The recovery of lead(II) from Yellow river water, Huangshui water, and tap water is in range of 99.3–101.6%.     

Pipette‐tip solid‐phase extraction based on deep eutectic solvent modified graphene for the determination of sulfamerazine in river water

A green and novel deep eutectic solvent modified graphene was prepared and used as a neutral adsorbent for the rapid determination of sulfamerazine in a river water sample by pipette‐tip solid‐phase extraction. Compared with conventional graphene, deep eutectic solvent modified graphene can change the surface of graphene with wrinkled structure and higher selective extraction ability. The properties of deep eutectic solvent modified graphene and graphene were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Static adsorption showed deep eutectic solvent modified graphene had a higher adsorption ability (18.62 mg/g) than graphene. Under the optimum conditions, factors such as kinds of washing solvents and elution solvents and volume of elution solvent were evaluated. The limits of detection and quantification were 0.01 and 0.03 μg/mL, respectively. The method recoveries of sulfamerazine were in the range of 91.01–96.82% with associated intraday relative standard deviations ranging from 1.63 to 3.46% and interday relative standard deviations ranging from 0.68 to 3.84%. Deep eutectic solvent modified graphene showed satisfactory results (recovery was 95.38%) and potential for rapid purification of sulfamerazine in river water sample in combination with the pipette‐tip solid‐phase extraction method.     

A molecularly imprinted polymer for solid phase extraction of allantoin

We describe a molecularly imprinted polymer (MIP) for the solid-phase extraction of the skin protectant allantoin. The MIP was deposited on the surface of monodisperse silica microspheres possessing acroyl groups on the surface (MH-SiO₂). The resulting MIP microspheres (MH-SiO₂@MIP) showed a 3.4-fold higher adsorption capacity and a 1.9-fold better selectivity for allantoin than the respective non-imprinted polymer (MH-SiO₂@NIP). The monolayer adsorption capacities of the MH-SiO₂@MIP and the MH-SiO₂@NIP were calculated with the help of the Langmuir model and found to be 6.8 and 1.9 mg?g^?1, respectively. Adsorption kinetics fit a pseudo-second order rate mechanism, with an initial adsorption rate of 1.44 for the MH-SiO₂@MIP, and of 0.07 mg?g^?1?min^?1 for the MH-SiO₂@NIP. The material can be regenerated, and its adsorption capacity for allantoin remains stable for at least five regeneration cycles. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

Thermo‐sensitive surface molecularly imprinted magnetic microspheres based on bio‐macromolecules and their specific recognition of bovine serum albumin

Bovine serum albumin imprinted magnetic microspheres, with functional monomers of modified chitosan, N‐isopropylacrylamide and sulfobetaine methacrylate, were successfully prepared and characterized in detail. Computational analyses showed that during the preparation process, modified chitosan can effortlessly form multiple non‐covalent bonds with protein molecules. Temperature‐sensitive N‐isopropylacrylamide improves the elution efficiency by abating the mass transfer resistance. Meanwhile, the zwitterionic sulfobetaine methacrylate strongly interacts with H₂O molecules, remarkably reducing the non‐specific adsorption. The specific bovine serum albumin adsorption performances of the prepared imprinted material were then determined. The adsorption amount reached 86.87 mg/g and the imprinting factor was 6.49. These excellent specific adsorption properties are attributed to the synergetic effects of the different monomers. The fabricated imprinted material not only exhibits great prospects as a biosensor or separation material for protein molecules, but also provides a collaborative strategy for preparing multi‐functional imprinted materials.     

A molecularly imprinted polymer for solid phase extraction of allantoin

We describe a molecularly imprinted polymer (MIP) for the solid-phase extraction of the skin protectant allantoin. The MIP was deposited on the surface of monodisperse silica microspheres possessing acroyl groups on the surface (MH-SiO₂). The resulting MIP microspheres (MH-SiO₂@MIP) showed a 3.4-fold higher adsorption capacity and a 1.9-fold better selectivity for allantoin than the respective non-imprinted polymer (MH-SiO₂@NIP). The monolayer adsorption capacities of the MH-SiO₂@MIP and the MH-SiO₂@NIP were calculated with the help of the Langmuir model and found to be 6.8 and 1.9 mg•g⁻¹, respectively. Adsorption kinetics fit a pseudo-second order rate mechanism, with an initial adsorption rate of 1.44 for the MH-SiO₂@MIP, and of 0.07 mg•g⁻¹•min⁻¹ for the MH-SiO₂@NIP. The material can be regenerated, and its adsorption capacity for allantoin remains stable for at least five regeneration cycles. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

A molecularly imprinted polymer for the selective separation of allantoin was developed. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

     

Preparation and characterization of multiresponsive polymer composite microspheres with core–shell structure

Fe₃O₄/SiO₂/poly (N-isopropylacrylamide-co-N,N-dimethylaminoethyl methacrylate) [P(NIPAM-co-DMA)] multiresponsive composite microspheres with core–shell structure were synthesized by template precipitation polymerization. First, the magnetite nanoparticles were coated with silica and then modified with 3-(trimethoxysilyl)-propyl methacrylate (MPS). Subsequently, the Fe₃O₄/SiO₂ particles grafted with MPS were used to seed the precipitation copolymerization of NIPAM and DMA. The composite microspheres with core–shell structure were superparamagnetic, pH-sensitive, and thermoresponsive. The swelling ratio (D_{25 °C, pH = 3}/D_{50 °C, pH = 9})³ coupling of pH and temperature increased up to 21.2, which was much higher than that without comonomer DMA.     

Synthesis of polyacrylonitrile by single‐electron transfer‐living radical polymerization using Fe(0) as catalyst and its adsorption properties after modification

Fe(0) was firstly used as single‐electron transfer‐living radical polymerization catalyst for acrylonitrile polymerization using carbon tetrachloride as initiator, hexamethylenetetramine as N‐ligand, and N,N‐dimethylformamide as the solvent at 65 °C. First‐order kinetic studies indicated that this polymerization proceeded in a “living”/controlled manner. The living nature of the polymerization was also confirmed by chain extension of methyl methacrylate with polyacrylonitrile (PAN) as macroinitiator. Furthermore, PAN was modified with NH₂OH·HCl to generate amidoxime groups for extraction of heavy metal ions (Hg²⁺) from aqueous solutions. Fourier transformed infrared spectroscopy was performed to characterize chemical composition and structure. The adsorption property of Hg²⁺ was investigated at different pH values of aqueous solutions and distilled water. The maximal saturated adsorption capacity of Hg²⁺ was 4.8 mmol g^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Simultaneous analysis of three avermectins in soils by high-performance liquid chromatography with fluorescence detection

A simple and sensitive method has been developed and validated for the determination of abamectin B_1a (ABA B_1a), emamectin B_1a (EMA B_1a) benzoate and ivermectin H₂B_1a (IVM H₂B_1a) in soils. The avermectins (AVMs) residues were extracted from soils with acetonitrile/water (9?:?1, v/v) and then were purified on C₁₈ solid-phase extraction (SPE) cartridge. After being derivatised by N-methylimidazole (N-MIM) and trifluoroacetic anhydride (TFAA), the residues of three AVMs were analysed by high-performance liquid chromatography with fluorescence detection (HPLC-FLD). The method was validated in terms of system suitability, linearity, selectivity, precision, recovery, specificity and stability. There was a good linear relationship (R ^2?>?0.99) for three AVMs ranged from 0.01 to 5?µg?mL^?1. The LOD and LOQs of ABA B_1a, EMA B_1a benzoate and IVM H₂B_1a for standard solutions were 1.1–1.7 and 3.6–5.7?µg?L^?1 respectively. The accuracy of AVMs in soils was from 83.7 to 115.5% with precision less than or equal to 12.4%. Using the developed method, 9 soil samples with 9.3–12806.3?µg?kg^?1 of AVMs residues had been detected.     

Novel Imprinted Polymer for the Preconcentration of Cadmium with Determination by Inductively Coupled Plasma Mass Spectrometry

A novel Cd(II)-imprinted polymer was prepared with chemical immobilization using N-methacryloyl-L-Histidine as a vinylated chelating agent for online solid-phase extraction of Cd(II) for determination by inductively coupled plasma mass spectrometry. The Cd(II)–monomer complex was synthesized and copolymerized through bulk polymerization method in the presence of ethyleneglycoldimethacrylate cross-linker. The resulting polymer was leached with 1.0?mol?L^?1 HNO₃ to generate the cavities in the polymer for Cd(II) ions. The experimental conditions, including load pH, solution flow rate, and eluent concentration for effective sorption of Cd(II), were optimized using a minicolumn of the imprinted polymer. A volume of 5.0?mL sample 5?µg?L^?1 Cd(II) solution at pH 6.5 was loaded on the column at 2.0?mL?min^?1 using a sequential injection system followed by elution with 1.0?mL of 0.75?mol?L^?1 HNO₃. The relative selectivity coefficients of the imprinted polymer for Cd(II) were 38.5, 3.5, 3.0, 2.5, and 6.0 in the presence of Cu(II), Ni(II), Zn(II), Co(II), and Pb(II), respectively. Computational calculations revealed that the selectivity of the imprinted polymer was mediated by the stability of Cd(II)–N-methacryloyl-L-Histidine complex which was more stable than commonly used monomers including 4-vinyl pyridine, methacrylic acid, and vinylimidazole. The detection limit and relative standard deviation were 0.004?µg?L^?1 and 3.2%, respectively. The method was validated by the analysis of seawater certified reference material (CASS-4) and successfully used for the determination of Cd(II) in coastal seawater and estuarine water.     

Box–Behnken Experimental Design for the Synthesis of Magnetite–Polypyrrole Composite for the Magnetic Solid Phase Extraction of Non-steroidal Anti-inflammatory Drug Residues

A magnetite–polypyrrole composite adsorbent was synthesized and applied for the magnetic solid phase extraction of three non-steroidal anti-inflammatory drugs in aqueous solution and systematically investigated using Box–Behnken design. The synthesized composite adsorbent was characterized using Fourier-transform infrared spectroscopy, transmission electron microscopy, the Brunauer–Emmett–Teller method, vibrating sample magnetometry, and X-ray diffraction. The material was successfully modeled by Box–Behnken design (R²?=?0.94–0.98, p value: <0.001%) by monitoring the extraction efficiencies of naproxen, diclofenac sodium, and mefenamic acid. The analytes were determined using high-performance liquid chromatography with ultraviolet detection. The polymerization time was found to be the most significant factor, followed by amount of oxidant and monomer in the synthesis of the composite with a fixed Fe₃O₄ mass. Box–Behnken design was employed for the optimization of four parameters affecting the magnetic solid phase extraction: sample pH, salt addition, adsorption, and desorption time (R²?=?0.88–0.94). The optimized conditions for the procedure were validated, providing low detection limits (0.9–3.5?µg?L^?1) with good reproducibility (<7.16% relative standard deviation) and excellent recoveries (97.87–100.49%) for tap, river, and wastewater samples. The synthesized adsorbent demonstrated good adsorption efficiency for the simultaneous determination of the non-steroidal anti-inflammatory drug residues.     

Preparation of flower-like molybdenum disulfide for solid-phase extraction of N-nitrosoamines in environmental water samples

In this paper, a flower-like molybdenum disulfide material was prepared by hydrothermal method and was first used as adsorbents in the solid-phase extraction process for enriching N-nitrosoamines. Molybdenum disulfide exhibited three-dimensional petal-like microspheres with about 500 nm in diameter. The relevant analyte extraction and elution parameters (sample volumes, solution pH, washing solvents, elution solvents, and elution volumes) were optimized to improve the solid-phase extraction efficiency. The solid-phase extraction process coupled with high-performance liquid chromatography-tandem mass spectrometry for determining N-nitrosoamines in environmental water samples was established. The limits of detection were in the range of 0.01–0.05 ng/mL. The satisfactory recoveries (68.9–106.1%) were obtained at three different spiked concentrations (2, 5, and 8 ng/mL) in water samples, and the relative standard deviations were between 1.96 and 8.38%. This proposed method not only showed high sensitivity and good reusability but also provided a new adsorbent for enriching trace N-nitrosoamines in environmental water samples.     

Development and validation of an HPLC-DAD method for the simultaneous determination of most common rice pesticides in paddy water systems

Rice crop is mainly cultivated in large river basins which constitute unique ecosystems and their ecological quality is invaluable. However, the high loads of pesticides used in rice cultivation contribute to the contamination of the water resources in such rice-cultivated regions. To regularly monitor the quality of such water resources there is a need for a rapid and sensitive multi-residue analytical method. This study presents the development and validation of a new analytical method for the simultaneous determination of most rice pesticides including penoxsulam, tricyclazole, propanil and its main metabolite 3,4-dichloroaniline, azoxystrobin, molinate, profoxydim and deltamethrin. A solid-phase extraction (SPE) procedure followed by high performance liquid chromatography (HPLC) with diode array detection (DAD) was used. A C₁₈ RP column operated at 30°C was utilised and the analytes were separated with a mobile phase of acetonitrile/water mixture in a linear gradient. Clean-up of water samples and isolation of pesticides was performed on SPE Bakerbond octadecyl cartridges and an ethyl acetate-dichlomethane mixture (9?:?1 v/v, 2?mL) was used for elution. Method validation was performed by means of intra-day (n?=?5) and inter-day accuracy and precision (n?=?8), sensitivity and linearity. The relative recoveries of the pesticides in paddy water samples were acceptable (80.6–110.2%) and the relative standard deviation (RSD%) ranged from 1.9 to 7.6%. Limits of detection (LOD) and limits of quantification (LOQ) varied from 0.1 to 0.8?ng?mL^?1 and 0.25 to 2.0?ng?mL^?1 respectively, depending on the analyte. The method was subsequently applied for the determination of pesticide residues in paddy and canal water samples. Tricyclazole was the most frequently detected pesticide at the highest concentrations, while herbicides were less frequently detected and at lower concentrations. The method described could be a valuable tool for regular monitoring of surface water systems in rice-cultivated basins.     

Determination of Triazines and N-Methylcarbamate Pesticides in Water by High-Performance Liquid Chromatography-Diode Array Detection

A rapid and selective method for the simultaneous determination of triazine herbicides (atrazine, its degradation product desethylatrazine, simazine, prometryn, terbutryn) and N-methylcarbamate insecticides (propoxur, carbaryl and methiocarb) in surface water has been developed. A 0.5 L of the water sample was preconcentrated by passage through a 1 g C₁₈ solid-phase extraction cartridge. The retained compounds were eluted with 5 mL of methanol from the cartridge. The pesticides were separated and quantified by reversed-phase high-performance liquid chromatography with UV diode-array detection. Analytical separation was performed using a concave gradient elution with acetonitrile and water on a C₁₈ column. Prometryn and terbutryn were determined at 240 nm; propoxur, methiocarb at 204 nm and the others at 220 nm. Recoveries varied from 85 to 102% over concentrations at 0.025 and 0.2 µg L^?1. The limits of detection for the compounds investigated are in the range of 0.005-0.012 µg L^?1.     

Biomass-derived porous material synthesized by one-step calcination method for the magnetic solid-phase extraction of polychlorinated biphenyls in water

Recent findings unfold that biomass materials with the micro/mesoporous structure were often treated as adsorbents for organic substances. In this work, a one-step calcination method was adopted in the preparation of magnetic porous green bean biomass material. It has the properties of magnetism and porosity after the addition of Co(NO₃)₂ and high-temperature calcination. A variety of characterizations have been operated, including energy dispersive X-ray detector, vibrating sample magnetometer, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller analysis, and so on. It has a specific surface area of 168.1611 m²/g and a pore volume of 0.1764 cm³/g. The material was used in magnetic solid-phase extraction of three polychlorinated biphenyls: 2-chlorobiphenyl, 4-chlorobiphenyl, and 2,2,5-trichlorobiphenyl. Several factors were investigated, such as material amount, eluents, adsorption time, solution pH, salinity, and reusability. Under optimized conditions, good recoveries (90.24–93.34%) were achieved with the relative standard deviation in a range from 2.30 to 4.83%. Three real water samples (tap, river, and lake water) were tested to verify the accuracy of the method. This method can be successfully used in the analysis of some polychlorinated biphenyls congeners in water.     

Preconcentration and Determination of Copper(II) by Novel Solid-Phase Extraction and High-Resolution Continuum Source Flame Atomic Absorption Spectrometry

Amberlite XAD-4 modified with N-para-anisidine-3,5-di-tert-butylsalicylaldimine was investigated as a new chealting sorbent for the selective separation and preconcentration of Cu(II). The metal ion was retained by chemical sorption on the modified resin, eluted by hydrochloric acid, and determined by high-resolution continuum source flame atomic absorption spectrometry. The prepared resin was characterized for the solid-phase extraction of Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ in a column. The influence of the pH, the mass of solid phase, eluent, flow rate, and sample volume was optimized. Using the optimum conditions, only Cu(II) showed quantitative sorption at the 95% confidence level, and the recoveries of the other metal ions were below 80%. A preconcentration factor 125 was obtained for Cu(II) with a limit of detection of 0.56?µg?L^?1. The method was used for the determination of Cu(II) in tap water, river water, tomato leaves, and fish. The relative standard deviation and the relative error were lower than 7%.     

Selective Solid-Phase Extraction of Trace Copper Ions in Aqueous Solution with a Cu(II)-Imprinted Interpenetrating Polymer Network Gel Prepared by Ionic Imprinted Polymer (IIP) Technique

An Cu(II)-imprinted interpenetrating polymer network (IPN) gel of epoxy-diethylenetriamine and methacrylic acid-acrylamide-N,N′-methylene-bis-(acrylamide) was synthesized by the ionic imprint polymer (IIP) technique. The first polymer network is formed by epoxy gelation with diethylenetriamine. The other is formed by copper methacrylate co- polymerization with acrylamide and cross-linker N,N′-methylene-bis-(acrylamide). The adsorption–desorption characteristics of the IPN gel as a highly selective solid-phase extraction (SPE) and preconcentration adsorbent for Cu²⁺ from aqueous solution were investigated. The experimental results show that trace Cu²⁺ ions can be quantitatively enriched at pH 5 with recovery >95%. The maximum static adsorption capacity of the ion-imprinted functionalized gel adsorbent was 76 mg g⁻¹. Comparing with non-imprinted IPN gel, the imprinted IPN gel has higher adsorption capacity and selectivity for Cu²⁺ by the static adsorption–desorption experiment. Simultaneously, the times of adsorption equilibration and complete desorption were remarkably short. The precision (RSD) for 11 replicate adsorbent extractions of 20 ng mL⁻¹ Cu²⁺ was 3.4%. The established procedure was applied to two real water samples with satisfactory results. The prepared ion-imprinted IPN gel adsorbent was shown to be promising for solid-phase extraction coupled with atomic absorption spectrometry (AAS) for the determination of trace copper in real samples. In addition, the coordination interaction of Cu²⁺ and functional groups of the IPN gel adsorbent was primarily discussed by FT-IR spectra.