Relative calcium-binding strengths of amino acids determined using the kinetic method

We have measured the relative calcium-binding energies of amino acids using tandem mass spectrometry of Ca(2+)-bound trimeric amino acids. Although calcium-bound dimeric amino acid complexes coordinated too strongly to allow observation of the two competing dissociation products (calcium-bound monomeric ions) required for analysis of their metal binding affinities using the conventional kinetic method, the Ca(2+)-bound trimeric cluster ions dissociated readily to form dimeric cluster ions through simple ligand losses. The calcium-binding energies were obtained by comparing the ratio of the [Ca(2+)(A(1))(2) - H(+)](+) and [Ca(2+) (A(1))(A(2)) - H(+)](+) ions that dissociated from the [Ca(2+) (A(1))(2)(A(2)) - H(+)](+) ion and the ratio of the [Ca(2+)(A(2))(2) - H(+)](+) and [Ca(2+)(A(1)) (A(2)) - H(+)](+) ions that dissociated from the [Ca(2+)(A(1))(A(2))(2) - H(+)](+) ion, where A(1) and A(2) represent two amino acids. The energies deduced from this analysis represent the relative average binding energies of complexes having the form [Ca(2+)(A(1))(2) - H(+)](+). The relative Ca(2+)-binding strengths of the alpha-amino acid complexes follow the order Cys < Ser < Thr < Ile < Leu < Val < Gly < Ala < Pro < Phe < Met < Tyr < Asn < His < Gln < Trp < Lys < Arg. To our knowledge, this report provides the first example of using kinetic methods to determine the relative binding strengths of divalent metal-amino acid complexes.     

Synthesis, structure, and solution properties of [(mim-TASN)FeCl2]+ and its μ-oxo derivative

A series of iron(III) complexes based on the tetradentate ligand 4-((1-methyl-1H-imidazol-2-yl)methyl)-1-thia-4,7-diazacyclononane (L) has been synthesized, and their solution properties investigated. Addition of FeCl(3) to methanol solutions of L yields [LFeCl(2)]FeCl(4) as a dark red solid. X-ray crystallographic analysis reveals a pseudo-octahedral environment around iron(III) with the three nitrogen donors of L coordinated facially. Ion exchange reactions with NaPF(6) in methanol facilitate chloride exchange resulting in a different diastereomer for the [LFeCl(2)](+) cation. X-ray analysis of [LFeCl(2)]PF(6) finds meridional coordination of the three nitrogen donors of L. Electrochemical studies of [LFeCl(2)](+) in acetonitrile display a single Fe(III)/(II) reduction potential at -280 mV versus ferrocenium/ferrocene. In methanol, a broad cathodic wave is observed because of partial exchange of one chloride for methoxide with half-potentials of -170 mV and -440 mV for [LFeCl(2)](+/0) and [LFeCl(OCH(3))](+/0), respectively. The equilibrium constants for chloride exchange are 7 × 10(-4) M(-1) for Fe(III) and 2 × 10(-8) M(-1) for Fe(II). In aqueous solutions chloride exchange yields three accessible complexes as a function of pH. Strongly acidic conditions yield the aqua complex [LFeCl(OH(2))](2+) with a measured pK(a) of 3.8 ± 0.1. Under mildly acidic conditions, the μ-OH complex [(LFeCl)(2)(OH)](3+) with a pK(a) of 6.1 ± 0.3 is obtained. The μ-oxo complex [(LFeCl)(2)(O)](2+) is favored under basic conditions. The diiron Fe(III)/Fe(III) complexes [(LFeCl)(2)(OH)](3+) and [(LFeCl)(2)(O)](2+) can be reduced by one electron to the mixed valence Fe(III)/Fe(II) derivatives at -170 mV and -390 mV, respectively. From pH dependent voltammetric studies, the pK(a) of the mixed valent μ-OH complex [(LFeCl)(2)(OH)](2+) is calculated at 10.3.     

The phenoxy/phenol/copper cation: a minimalistic model of bonding relations in active centers of mononuclear copper enzymes

The "bare" complex [Cu(PhOH)(PhO)](+) with a phenol (PhOH) and a phenoxy (PhO) ligand bound to copper is studied both experimentally and computationally. The binding energies and structure of this complex are probed by mass spectrometry, infrared multi-photon dissociation, and DFT calculations. Further, the monoligated complexes [Cu(PhO)](+) and [Cu(PhOH)](+) are investigated for comparison. DFT calculations on the [Cu(PhOH)(PhO)](+) complex predict that a phenolate anion interacts with copper(II) preferentially through the oxygen atom, and the bonding is associated with electron transfer to the metal center resulting in location of the unpaired electron at the aromatic moiety. Neutral phenol, on the other hand, interacts with copper preferentially through the aromatic ring. The same arrangements are also found in the monoligated complexes [Cu(PhO)](+) and [Cu(PhOH)](+). The calculations further indicate that the bond strength between the copper atom and the oxygen atom of the phenoxy radical is weakened by the presence of neutral phenol from 2.6 eV in bare [Cu(PhO)](+) to 2.1 eV in [Cu(PhOH)(PhO)](+).     

The dramatic effect of NH3 co-ligation on the Fe+-assisted activation of carbon dioxide in the gas phase: from bare metal ions to complexes

The catalytic efficiency of Fe(+) ion over the CO(2) decomposition in the gas phase has been extensively investigated with the help of electronic structure calculation methods. Potential-energy profiles for the activation process Fe(+) + CO(2) --> CO + FeO(+) along two rival potential reaction paths, namely the insertion and addition pathways, originating from the end-on kappa(1)-O and kappa(2)-O,O coordination modes of CO(2) with the metal ion, respectively, have been explored by DFT calculations. For each pathway the potential energy surfaces of the high-spin sextet (S = 5/2) and the intermediate-spin quartet (S = 3/2) spin-states have been explored. The complete energy reaction profile calculated by a combination of ab initio and density functional theory (DFT) computational techniques reveals a two-state reactivity, involving two spin inversions, for the decomposition process and accounts well for the experimentally observed inertness of bare Fe(+) ions towards CO(2) activation. Furthermore, the coordination of up to three extra ancillary NH(3) ligands with the Fe(+) metal ion has been explored and the geometric and energetic reaction profiles of the CO(2) activation processes Fe(+) + n x NH(3) + CO(2) --> [Fe(NH(3))(n)(CO(2))](+) --> [Fe(NH(3))(n)(O)(CO)](+) --> CO + [Fe(O)(NH(3))(n)](+) (n = 1, 2 or 3) have thoroughly been scrutinized for both the insertion and the addition mechanisms. Inter alia, the geometries and energies of the various states of the [Fe(NH(3))(n)(CO(2))](+) and [Fe(NH(3))(n)(O)(CO)](+) complexes are explored and compared. Finally, a detailed analysis of the coordination modes of CO(2) in the cationic [Fe(NH(3))(n)(CO(2))](+) (n = 0, 1, 2 and 3) complexes is presented.     

Difference in spin crossover pathways among saddle-shaped six-coordinated iron(III) porphyrin complexes

The electronic states of a series of saddle-shaped porphyrin complexes [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) have been examined in solution by (1)H NMR, (13)C NMR, and EPR spectroscopy and by magnetic measurements. While [Fe(OMTPP)(DMAP)(2)](+) and [Fe(TBTXP)(DMAP)(2)](+) maintain the low-spin (S = (1)/(2)) state, [Fe(OMTPP)(THF)(2)](+) and [Fe(TBTXP)(THF)(2)](+) exhibit an essentially pure intermediate-spin (S = (3)/(2)) state over a wide range of temperatures. In contrast, the Py and 4-CNPy complexes of OMTPP and TBTXP exhibit a spin transition from S = (3)/(2) to S = (1)/(2) as the temperature was decreased from 300 to 200 K. Thus, the magnetic behavior of these complexes is similar to that of [Fe(OETPP)Py(2)](+) reported in our previous paper (Ikeue, T.; Ohgo, Y.; Yamaguchi, T.; Takahashi, M.; Takeda, M.; Nakamura, M. Angew. Chem., Int. Ed. 2001, 40, 2617-2620) in the context that all these complexes exhibit a novel spin crossover phenomenon in solution. Close examination of the NMR and EPR data of [Fe(OMTPP)L(2)](+) and [Fe(TBTXP)L(2)](+) (L = Py, 4-CNPy) revealed, however, that these complexes adopt the less common (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature in contrast to [Fe(OETPP)Py(2)](+) which shows the common (d(xy))(2)(d(xz), d(yz))(3) electron configuration. These observations have been attributed to the flexible nature of the OMTPP and TBTXP cores as compared with that of OETPP; the relatively flexible OMTPP and TBTXP cores can ruffle the porphyrin ring and adopt the (d(xz), d(yz))(4)(d(xy))(1) electron configuration at low temperature. Therefore, this study reveals that the rigidity of porphyrin cores is an important factor in determining the spin crossover pathways.     

Single- and double-cubane clusters in the multiple oxidation states [VFe(3)S(4)](3+,2+,1+)

A new series of cubane-type [VFe(3)S(4)](z)() clusters (z = 1+, 2+, 3+) has been prepared as possible precursor species for clusters related to those present in vanadium-containing nitrogenase. Treatment of [(HBpz(3))VFe(3)S(4)Cl(3)](2)(-) (2, z = 2+), protected from further reaction at the vanadium site by the tris(pyrazolyl)hydroborate ligand, with ferrocenium ion affords the oxidized cluster [(HBpz(3))VFe(3)S(4)Cl(3)](1)(-) (3, z = 3+). Reaction of 2 with Et(3)P results in chloride substitution to give [(HBpz(3))VFe(3)S(4)(PEt(3))(3)](1+) (4, z = 2+). Reaction of 4 with cobaltocene reduced the cluster with formation of the edge-bridged double-cubane [(HBpz(3))(2)V(2)Fe(6)S(8)(PEt(3))(4)] (5, z = 1+, 1+), which with excess chloride underwent ligand substitution to afford [(HBpz(3))(2)V(2)Fe(6)S(8)Cl(4)](4)(-) (6, z = 1+, 1+). X-ray structures of (Me(4)N)[3], [4](PF(6)), 5, and (Et(4)N)(4)[6] x 2MeCN are described. Cluster 5 is isostructural with previously reported [(Cl(4)cat)(2)(Et(3)P)(2)Mo(2)Fe(6)S(8)(PEt(3))(4)] and contains two VFe(3)S(4) cubanes connected across edges by a Fe(2)S(2) rhomb in which the bridging Fe-S distances are shorter than intracubane Fe-S distances. M?ssbauer (2-5), magnetic (2-5), and EPR (2, 4) data are reported and demonstrate an S = 3/2 ground state for 2 and 4 and a diamagnetic ground state for 3. Analysis of (57)Fe isomer shifts based on an empirical correlation between shift and oxidation state and appropriate reference shifts results in two conclusions. (i) The oxidation 2 --> 3 + e(-) results in a change in electron density localized largely or completely on the Fe(3) subcluster and associated sulfur atoms. (ii) The most appropriate charge distributions are [V(3+)Fe(3+)Fe(2+)(2)S(4)](2+) (Fe(2.33+)) for 1, 2, and 4 and [V(3+)Fe(3+)(2)Fe(2+)S(4)](3+) (Fe(2.67+)) for 3 and [V(2)Fe(6)S(8)(SEt)(9)](3+). Conclusion i applies to every MFe(3)S(4) cubane-type cluster thus far examined in different redox states at parity of cluster ligation. The formalistic charge distributions are regarded as the best current approximations to electron distributions in these delocalized species. The isomer shifts require that iron atoms are mixed-valence in each cluster.     

Bimetallic reactivity. One-site addition two-metal oxidation reaction of dioxygen with a bimetallic dicobalt(II) complex bearing five- and six-coordinate sites

The di-Co(2+) complex, [Co(2+)(mu-OH)(oxapyme)Co(2+)(H(2)O)](+), contains an unsymmetrical binucleating ligand (oxapyme) which provides five- and six-coordinate metal sites when a hydroxide bridge is introduced. This complex absorbs 1 equiv of O(2) irreversibly in solution, producing an unstable di-Co(3+) oxygenated product. The oxygenated product has been studied at low temperatures, where its electronic absorption and (1)H NMR spectra were recorded. It is probable that the oxygenation reaction involves a one-site addition two-metal oxidation reaction to produce an end-on-bonded peroxide ligand at the available coordination site, giving the complex [Co(3+)(mu-OH)(oxapyme)Co(3+)(mu(1)-O(2))](+). Addition of 1 equiv of HClO(4) to this oxygenation product gives a stable peroxide complex, [Co(3+)(mu,eta(1):eta(2)-O(2))(oxapyme)Co(3+)](2+), where one of the oxygen atoms bridges the two metals and is sideways bonded to one of the metals. The formation of this stable complex involves expulsion of the OH(-) bridge. Addition of NO(2)(-) to the sideways-bonded peroxide complex leads to the formation of another stable complex, [Co(3+)(mu,eta(1):eta(1)-O(2))(oxapyme)Co(3+)(NO(2))](+), where the peroxide forms a classic di-end-on bridge to the two metals. Both of these complexes have been fully characterized. Addition of acid to this second stable dioxygen complex leads to the release of HNO(2) and the formation of the mu,eta(1):eta(2) sideways-bonded peroxide complex.     

Stability of the gold(i)-phosphine bond. A comparison with other group 11 elements

The stability of gold phosphine complexes of the form [Au(PH(3))(n)()](+) (n = 1-4) and [AuCl(PH(3))(n)()] (n = 1-3) is analyzed in detail by applying quantum theoretical methods and compared to the coordination behavior of the lighter group 11 elements copper and silver. It is shown that, once [M(PH(3))(2)](+) or [MClPH(3)] (M = Cu, Ag, and Au) is formed, further coordination by PH(3) ligands is relatively weak; i.e., the energy gain to form [M(PH(3))(3)](+) from [M(PH(3))(2)](+) is less than 60 kJ mol(-)(1), and less than 100 kJ mol(-)(1) to form [MCl(PH(3))(2)] from [MClPH(3)]. Relativistic effects in gold significantly influence these factors and reduce the tendency for phosphine coordination beyond two-coordination. This implies that the most favored coordination number for gold is two with either a linear P-Au-P or P-Au-X arrangement (X = a strongly coordinating ligand like Cl(-)). Instead, X-Au-PH(3) units prefer to interact via close Au-Au contacts (aurophilic interactions) keeping the linear structure approximately intact, while the corresponding copper and silver compounds prefer PH(3) coordination to strongly bound M(2)Cl(2) units (M = Cu or Ag) where two chlorine atoms bridge the two metal atoms thus having the formal coordination number of three for copper or silver.     

A DFT based investigation into the electronic structure and properties of hydride rich rhodium clusters

Density functional theory has been used to investigate the structures, bonding and properties of a family of hydride rich late transition metal clusters of the type [Rh(6)(PH(3))(6)H(12)](x) (x = 0, +1, +2, +3 or +4), [Rh(6)(PH(3))(6)H(16)](x) (x = +1 or +2) and [Rh(6)(PH(3))(6)H(14)](x) (x = 0, +1 or +2). The positions of the hydrogen atoms around the pseudo-octahedral Rh(6) core in the optimized structures of [Rh(6)(PH(3))(6)H(12)](x) (x = 0, +1, +2, +3 or +4) varied depending on the overall charge on the cluster. The number of semi-bridging hydrides increased (semi-bridging hydrides have two different Rh-H bond distances) as the charge on the cluster increased and simultaneously the number of perfectly bridging hydrides (equidistant between two Rh centers) decreased. This distortion maximized the bonding between the hydrides and the metal centers and resulted in the stabilization of orbitals related to the 2T(2g) set in a perfectly octahedral cluster. In contrast, the optimized structures of the 16-hydride clusters [Rh(6)(PH(3))(6)H(12)](x) (x = +1 or +2) were similar and both clusters contained an interstitial hydride, along with one terminal hydride, ten bridging hydrides and two coordinated H(2) molecules which were bound to two rhodium centers in an eta(2):eta(1)-fashion. All the hydrides were on the outside of the Rh(6) core in the lowest energy structures of the 14-hydride clusters [Rh(6)(PH(3))(6)H(14)] and [Rh(6)(PH(3))(6)H(14)](+), which both contained eleven bridging hydrides, one terminal hydride and one coordinated H(2) molecule. Unfortunately, the precise structure of [Rh(6)(PH(3))(6)H(14)](2+) could not be determined as structures both with and without an interstitial hydride were of similar energy. The reaction energetics for the uptake and release of two molecule of H(2) by a cycle consisting of [Rh(6)(PH(3))(6)H(12)](2+), [Rh(6)(PH(3))(6)H(16)](2+), [Rh(6)(PH(3))(6)H(14)](+), [Rh(6)(PH(3))(6)H(12)](+) and [Rh(6)(PH(3))(6)H(14)](2+) were modelled, and, in general, good agreement was observed between experimental and theoretical results. The electronic reasons for selected steps in the cycle were investigated. The 12-hydride cluster [Rh(6)(PH(3))(6)H(12)](2+) readily picks up two molecules of H(2) to form [Rh(6)(PH(3))(6)H(16)](2+) because it has a small HOMO-LUMO gap (0.50 eV) and a degenerate pair of LUMO orbitals available for the uptake of four electrons (which are provided by two molecules of H(2)). The reverse process, the spontaneous release of a molecule of H(2) from [Rh(6)(PH(3))(6)H(16)](+) to form [Rh(6)(PH(3))(6)H(14)](+) occurs because the energy gap between the anti-bonding SOMO and the next highest energy occupied orbital in [Rh(6)(PH(3))(6)H(16)](+) is 0.9 eV, whereas in [Rh(6)(PH(3))(6)H(14)](+) the energy gap between the anti-bonding SOMO and the next highest energy occupied orbital is only 0.3 eV. At this stage the factors driving the conversion of [Rh(6)(PH(3))(6)H(14)](+) to [Rh(6)(PH(3))(6)H(12)](2+) are still unclear.     

Synthesis of organosoluble polyamides with bulky triaryl imidazole pendent group

New unsymmetrical diamine monomer containing triaryl imidazole pendent group,4-[4-(4,5-diphenyl-1H-imidazol-2-yl)phenoxy] -1,3-benzenediamine,was synthesized via aromatic substitution reaction of 1-chloro-2,4-dinitrobenzene with 4-(4,5- diphenyl-1H-imidazol-2-yl)phenol,followed by palladium-catalyzed hydrazine reduction.This new monomer was further confirmed by FT-IR,~1H NMR and ~(13)C NMR.Novel polyamides having pendant triaryl imidazole group were prepared by the phosphorylation polycondensation of fou...     

Solvation of uranyl-CMPO complexes in dry vs. humid forms of the [BMI][PF6] ionic liquid. A molecular dynamics study

The solvation of the [UO(2)(NO(3))(CMPO)](+) and [UO(2)(NO(3))(2)(CMPO)(2)] complexes (CMPO = octyl(phenyl)-N,N-diisobutylmethylcarbamoyl phosphine oxide) is investigated by molecular dynamics in the "dry" and "humid" forms of a room temperature ionic liquid (IL) based on the 1-butyl-3-methylimidazolium (BMI(+)) cation and the hexafluorophosphate (PF(6)(-)) anion. The simulations reveal the importance of the solvent anions in "dry" conditions and of water molecules in the "humid" solvent. For the [UO(2)(NO(3))(CMPO)](+) complex, the monodentate vs. bidentate coordination modes of CMPO are compared, and the first solvation shell of uranyl is completed by 1-3 PF(6)(-) anions in the dry IL and by 2-3 water molecules in the humid IL, leading to a total coordination number close to 5. The energy analysis shows that interactions with the IL stabilize the [UO(2)(NO(3))(bi)(CMPO)(mono)](+) form (with bidentate nitrate and monodentate CMPO) in the dry IL and the [UO(2)(NO(3))(mono)(CMPO)(mono)](+) form (with monodentate nitrate and CMPO) in the humid IL. The extracted compound characterized by EXAFS is thus proposed to be the [UO(2)(NO(3))(mono)(CMPO)(mono)(H(2)O)(3)](+) species. Furthermore we compare the [UO(2)(NO(3))(2)(CMPO)(2)] complex in its associated and dissociated forms ([UO(2)(NO(3))(mono)(CMPO)(mono)](+) + CMPO + NO(3)(-)) and discuss the results in the context of uranyl extraction by CMPO to ionic liquids.     

Aggregation control by homologous tripodal tetradentate amino acid ligands in oxo-bridged diiron(III) aquo complexes

Isoelectronic oxo-bridged diiron(III) aquo complexes of the homologous tripodal tetradentate amino acid ligands, N,N'-bis(2-pyridylmethyl)-3-aminoacetate (bpg(-)) and N,N'-bis(2-pyridylmethyl)-3-aminopropionate (bpp(-)), containing [(H(2)O)Fe(III)-(mu-O)-Fe(III)(H(2)O)](4+) cores, oligomerise, respectively, by dehydration and deprotonation, or by dehydration only, in reversible reactions. In the solid state, [Fe(2)(O)(bpp)(2)(H(2)O)(2)](ClO(4))(2) (1(ClO(4))(2)) exhibits stereochemistry identical to that of [Fe(2)(O)(bpg)(2)(H(2)O)(2)](ClO(4))(2) (2(ClO(4))(2)), with the ligand carboxylate donor oxygen atoms and the water molecules located cis to the oxo bridge and the tertiary amine group trans to it. Despite their structural similarity, 1(2+) and 2(2+) display markedly different aggregation behaviour in solution. In the absence of significant water, 1(2+) dehydrates and dimerises to give the tetranuclear complex, [Fe(4)(O)(2)(bpp)(4)](ClO(4))(4) (3(ClO(4))(4)), in which the carboxylate groups of the four bpp(-) ligands act as bridging groups between two [Fe(2)(O)(bpp)(2)](2+) units. Under similar conditions, 2(2+) dehydrates and deprotonates to form dinuclear and trinuclear oligomers, [Fe(2)(O)(OH)(bpg)(2)](ClO(4)) (4ClO(4)) and [Fe(3)(O)(2)(OH)(bpg)(3)](ClO(4)) (5(ClO(4))), related by addition of 'Fe(O)(bpg)' units. The trinuclear 5(ClO(4)), characterised crystallographically as two solvates 5(ClO(4)).3H(2)O and 5(ClO(4)).2MeOH, is based on a hexagonal [Fe(3)(O)(2)(OH)(bpg)(3)](+) unit, formally containing one hydroxo and two oxo bridges. The different aggregation behaviour of 1(ClO(4))(2) and 2(ClO(4))(2) results from the difference of one methylene group in the pendant carboxylate arms of the amino acid ligands.     

Self-assembly of 2D-->2D interpenetrating coordination polymers showing polyrotaxane- and polycatenane-like motifs: influence of various ligands on topological structural diversity

A series of mixed-ligand coordination complexes, namely, [Cd 2(bimb) 2(L (1)) 2] ( 1), [Cd(bpimb) 0.5(L (2))(H 2O)] ( 2), [Zn 5(bpib) 2(L (3)) 4(OH) 2(H 2O) 2] ( 3), [Zn(bpib) 0.5(L (4))] ( 4), and [Cd(bib)(L (4))] ( 5), where bimb = 1,4-bis((1 H-imidazol-1-yl)methyl)benzene, bpimb = 1,4-bis((2-(pyridin-2-yl)-1 H-imidazol-1-yl)methyl)benzene, bpib = 1,4-bis(2-(pyridin-2-yl)-1 H-imidazol-1-yl)butane, bib = 1,4-bis(1 H-imidazol-1-yl)butane, H 2L (1) = 4-((4-(dihydroxymethyl)phenoxy)methyl)benzoic acid, H 2L (2) = 4,4'-methylenebis(oxy)dibenzoic acid, H 2L (3) = 3,3'-methylenebis(oxy)dibenzoic acid, and H 2L (4) = 4,4'-(2,2'-oxybis(ethane-2,1-diyl)bis(oxy))dibenzoic acid, have been synthesized under hydrothermal conditions. Their structures have been determined by single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR spectra, and thermogravimetric (TG) analyses. In 1, (L (1)) (2-) anions link the metal-neutral ligand subunits to generate a 2-fold parallel interpenetrating net with the 6 (3) topology. In 2- 4, neutral ligands connect the various metal-carboxylic ligand subunits to give a 2-fold parallel interpenetrating net with (4,4) topology in 2, a 2-fold parallel interpenetrating net with (3,6)-connected topology in 3, and a 3-fold parallel interpenetrating net with (4,4) topology in 4. Compounds 1- 4 display both polyrotaxane and polycatenane characters. Compound 5 is a 5-fold parallel interpenetrating net with (4,4) topology. By careful inspection of these structures, we find that different topological structures showing both polyrotaxane and polycatenane characters have been achieved with increase of the carboxylic ligand length. It is believed that various carboxylic ligands and N-donor ligands with different coordination modes and conformations are important for the formation of the different structures. In addition, the luminescent properties of these compounds are discussed.     

La3+-catalyzed methanolysis of N-aryl-beta-lactams and nitrocefin

The kinetics of the La(3+)-catalyzed methanolysis of N-phenyl-beta-lactam (2) and N-p-nitrophenyl-beta-lactam (3) as well as that of nitrocefin (1) were studied at 25 degrees C under buffered conditions. In the case of 2 and 3, the observed second-order rate constants (k(2)(obs)) for catalysis plateau at pH 7.5-7.8, reaching values of 1 x 10(-)(2) and 35 x 10(-)(2) M(-)(1) s(-)(1) respectively. Potentiometric titrations of solutions of 2 x 10(-)(3) M La(OTf)(3) were analyzed in terms of a dimer model (La(3+)(2)((-)OCH(3))(n)()), where the number of methoxides varies from 1 to 5. The species responsible for catalysis in the pH range investigated contain 1-3 methoxides, the one having the highest catalytic activity being La(3+)(2)((-)OCH(3))(2), which comprises 80% of the total La(3+) forms present at its pH maximum of 8.9. The catalysis afforded by the La(3+) dimers at a neutral pH is impressive relative to the methoxide reactions: at pH 8.4 a 1 mM solution of catalyst (generated from 2 mM La(OTf)(3)) accelerated the methanolysis of 2 by approximately 2 x 10(7)-fold and 3 by approximately 5 x 10(5)-fold. As a function of metal ion concentration, the La(3+)-catalyzed methanolysis of 1 proceeds by pathways involving first one bound metal ion and then a second La(3+) leading to a plateau in the k(obs) vs [La(3+)](total) plots at all pH values. The k(max)(obs) pseudo-first-order rate constants at the plateaus, representing the spontaneous methanolysis of La(3+)(2)(1(-)) forms, has a linear dependence on [(-)OCH(3)] (slope = 0.84 +/- 0.05 if all pH values are used and 1.02 +/- 0.03 if all but the two highest pH values are used). The speciation of bound 1 at a La(3+) concentrations corresponding to that of the onset of the kinetic plateau region was approximated through potentiometric titration of the nonreactive 3,5-dinitrobenzoic acid in the presence of 2 equiv of La(OTf)(3). A total speciation diagram for all bound forms of La(3+)(2)(1(-))((-)OCH(3))(n)(), where n = 0-5, was constructed and used to determine their kinetic contributions to the overall pH vs k(max)(obs) plot under kinetic conditions. Two kinetically equivalent mechanisms were analyzed: methoxide attack on La(3+)(2)(1(-))((-)OCH(3))(n)(), n = 0-2; unimolecular decomposition of the forms La(3+)(2)(1(-))((-)OCH(3))(n)(), n = 1-3.     

A terpyridyl-imidazole (tpy-HImzPh3) based bifunctional receptor for multichannel detection of Fe2+ and F- ions

The X-ray crystal structures of the tridentate ligand, 4'-[4-(4,5-diphenyl-1H-imidazol-2-yl)-phenyl]-[2,2':6',2']terpyridine (tpy-HImzPh(3)) and its bis-homoleptic iron(ii) complex of composition [Fe(tpy-HImzPh(3))(2)](2+) have been determined, showing that the ligand crystallized in a monoclinic form with the space group P2(1)/c while its Fe(II) complex crystallizes in an orthorhombic form with space group Fddd. Both the anion and cation binding properties of the receptor were thoroughly investigated in dimethylformamide-acetonitrile (1?:?9) solution using absorption, emission, and (1)H NMR spectral studies which revealed that the receptor acts as a sensor for both F(-) and Fe(2+). In the presence of excess F(-) ion, deprotonation of the imidazole N-H fragment of the receptor occurs, an event which is signaled by the development of a yellow color visible with the naked eye. The estimated value of the equilibrium constant of the receptor with F(-) is 1.9 × 10(4) M(-1). Deprotonation is also observed in the presence of hydroxide. The receptor also shows colorimetric and fluorimetric sensing ability towards Fe(2+) ions. The binding site for the metal ion in the system has been unambiguously established by single-crystal X-ray diffraction studies of the Fe(II) complex of the receptor. The influence of solvents on the absorption and fluorescence spectra of the receptor has been investigated in detail. Cyclic voltammetric (CV) and square wave voltammetric (SWV) measurements carried out in dimethylformamide-acetonitrile (2?:?3) provided evidence in favor of cation (Fe(2+)) and anion (F(-)) concentration dependent electrochemical responses, enabling the ligand to act as a suitable electrochemical sensor for F(-) and Fe(2+) ions.     

Investigations into the metal species of the homogeneous iron(III) catalyzed Michael addition reactions

An investigation into the species formed in the first step of the solvent free homogeneous Michael reaction of alpha,beta-unsaturated ketones with 2-oxocyclopentanecarboxylate (1) is presented. This reaction is catalyzed by FeCl(3).6H(2)O (2) and Fe(ClO(4))(3).9H(2)O (3). EXAFS, XANES, Raman and UV-Vis studies were carried out to explain the experimentally found higher catalytic activity of Fe(ClO(4))(3).9H(2)O (3) compared to FeCl(3).6H(2)O (2). A very intense pre-edge peak is found for a 1.6 mol% solution of FeCl(3).6H(2)O (2) in 1, suggesting a tetrachloroferrate(III) compound to be present in this solution. This is proved by UV-Vis and Raman spectroscopy. The counterion of this anionic complex is an octahedral [Fe(III)(1-H)(2)(H2O2)](+) complex with two deprotonated 2-oxocyclopentanecarboxylate (1) as the chelating ligand, (1-H)(-), as suggested by the examination of the XANES region, the obtained coordination numbers from the EXAFS analysis and by UV-Vis and Raman spectroscopies. In summary, the anion-cation species [Fe(III)Cl(4)](-)[Fe(III)(-H)(2)(H2O2)](+) is formed with FeCl(3).6H(2)O (2), whereas in the case of Fe(ClO(4))(3).9H(2)O (3) XAFS, Raman and UV-Vis investigations suggest the presence of a complex of the form [Fe(III)(1-H)(2)(H2O2)](+)[ClO(4)](-). The obtained results are discussed to explain the reduced catalytic activity of FeCl(3).6H(2)O (2) in comparison to Fe(ClO(4))(3).9H(2)O (3).     

Synthesis and characterization of iron(III)-substituted, dimeric polyoxotungstates, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](n-) (n = 6, X = As(III), Sb(III); n = 4, X = Se(IV), Te(IV))

Interaction of the lacunary [alpha-XW(9)O(33)](9-) (X = As(III), Sb(III)) with Fe(3+) ions in acidic, aqueous medium leads to the formation of dimeric polyoxoanions, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)) in high yield. X-ray single-crystal analyses were carried out on Na(6)[Fe(4)(H(2)O)(10)(beta-AsW(9)O(33))(2)] x 32H(2)O, which crystallizes in the monoclinic system, space group C2/m, with a = 20.2493(18) A, b = 15.2678(13) A, c = 16.0689(14) A, beta = 95.766(2) degrees, and Z = 2; Na(6)[Fe(4)(H(2)O)(10)(beta-SbW(9)O(33))(2)] x 32H(2)O is isomorphous with a = 20.1542(18) A, b = 15.2204(13) A, c = 16.1469(14) A, and beta = 95.795(2) degrees. The selenium and tellurium analogues are also reported, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](4-) (X = Se(IV), Te(IV)). They are synthesized from sodium tungstate and a source of the heteroatom as precursors. X-ray single-crystal analysis was carried out on Cs(4)[Fe(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)] x 21H(2)O, which crystallizes in the triclinic system, space group P macro 1, with a = 12.6648(10) A, b = 12.8247(10) A, c = 16.1588(13) A, alpha = 75.6540(10) degrees, beta = 87.9550(10) degrees, gamma = 64.3610(10) gamma, and Z = 1. All title polyanions consist of two (beta-XW(9)O(33)) units joined by a central pair and a peripheral pair of Fe(3+) ions leading to a structure with idealized C(2h) symmetry. It was also possible to synthesize the Cr(III) derivatives [Cr(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)), the tungstoselenates(IV) [M(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)]((16)(-)(4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), and Hg(2+)), and the tungstotellurates(IV) [M(4)(H(2)O)(10)(beta-TeW(9)O(33))(2)]((16-4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), and Hg(2+)), as determined by FTIR. The electrochemical properties of the iron-containing species were also studied. Cyclic voltammetry and controlled potential coulometry aided in distinguishing between Fe(3+) and W(6+) waves. By variation of pH and scan rate, it was possible to observe the stepwise reduction of the Fe(3+) centers.     

Europium ion catalyzed methanolysis of esters at neutral pH and ambient temperature. catalytic Involvement of Eu3+(CH3O-)(CH3OH)x

The Eu(3+)-promoted methanolysis of three esters, p-nitrophenyl acetate (1), phenyl acetate (2), and ethyl acetate (3) is reported, as well as the potentiometric titration of Eu(3+) in MeOH at various [Eu(SO(3)CF(3))(3)] (SO(3)CF(3) = OTf). The titration data are analyzed in terms of two ionizations corresponding to macroscopic and values, which are respectively defined as the values at which the [CH(3)O(-)]/[Eu(3+)] = 0.5 and 1.5. As a function of increasing [Eu(OTf)(3)], increases slightly due to a proposed Eu(3+)/(-)OTf ion pairing effect, which tends to reduce the acidity of the metal-coordinated CH(3)OH, while decreases due to the formation of Eu(3+) dimers and oligomers which stabilize the (Eu(3+)(CH(3)O(-))(2))(n)forms through bridging of the methoxides between two or more metal ions. For ester 1, a detailed kinetic analysis of the reaction rates as a function of both [Eu(OTf)(3)] and in buffered methanol reveals that the /second-order rate constant (k(2)) plot for the catalyzed reaction follows a bell-shaped profile, suggesting that the active form is a Eu(3+)(CH(3)O(-)) monomer with a kinetic of 6.33 +/- 0.06 for formation and a of 8.02 +/- 0.10 for its conversion into the inactive (Eu(3+)(CH(3)O(-))(2))(n)oligomeric form. At higher values, plots of k(obs) vs [Eu(OTf)(3)] are linear at low metal concentration and plateau at higher metal concentration due to the formation of inactive higher order aggregates. The Eu(3+)(CH(3)O(-)) catalysis of the methanolysis of esters 1, 2, and 3 is substantial. Solutions of 10(-2) M of the catalyst at 7.12 accelerate the reaction relative to the methoxide reaction at that by 8 530 000-, 195 000 000- and 7 813 000-fold, respectively.     

Tunability of the M(II)M(III)/M(II)(2) and M(III)(2)/M(II)M(III) (M=Mn, Co) couples in bis-μ-O,O'-carboxylato-μ-OR bridged complexes

A comparison of the electrochemical properties of a series of dinuclear complexes [M(2)(L)(RCO(2))(2)](+) with M = Mn or Co, L = 2,6-bis(N,N-bis-(2-pyridylmethyl)-sulfonamido)-4-methylphenolato (bpsmp(-)) or 2,6-bis(N,N-bis(2-pyridylmethyl)aminomethyl)-4-tert-butylphenolato (bpbp(-)) and R = H, CH(3), CF(3) or 3,4-dimethoxybenzoate demonstrates: (i) The electron-withdrawing sulfonyl groups in the backbone of bpsmp(-) stabilize the [M(2)(bpsmp)(RCO(2))(2)](+) complexes in their M(II)(2) oxidation state compared to their [M(2)(bpbp)(RCO(2))(2)](+) analogues. Manganese complexes are stabilised by approximately 550 mV and cobalt complexes by 650 mV. (ii) The auxiliary bridging carboxylato ligands further attenuate the metal-based redox chemistry. Substitution of two acetato for two trifluoroacetato ligands shifts redox couples by 300-400 mV. Within the working potential window, reversible or quasi-reversible M(II)M(III)? M(II)(2) processes range from 0.31 to 1.41 V for the [Co(2)(L)(RCO(2))(2)](+/2+) complexes and from 0.54 to 1.41 V for the [Mn(2)(L)(RCO(2))(2)](+/2+) complexes versus Ag/AgCl for E(M(II)M(III)/M(II)(2)). The extreme limits are defined by the complexes [M(2)(bpbp)(CH(3)CO(2))(2)](+) and [M(2)(bpsmp)(CF(3)CO(2))(2)](+) for both metal ions. Thus, tuning the ligand field in these dinuclear complexes makes possible a range of around 0.9 V and 1.49 V for the one-electron E(M(II)M(III)/M(II)(2)) couple of the Mn and Co complexes, respectively. The second one-electron process, M(II)M(III)? M(III)(2) was also observed in some cases. The lowest potential recorded for the E°(M(III)(2)/M(II)M(III)) couple was 0.63 V for [Co(2)(bpbp)(CH(3)CO(2))(2)](2+) and the highest measurable potential was 2.23 V versus Ag/AgCl for [Co(2)(bpsmp)(CF(3)CO(2))(2)](2+).