压力对La_(0.3)Bi_(0.2)Ca_(0.5)MnO_3中晶格畸变的影响

利用同步辐射X射线衍射技术 ,对La0 .3Bi0 .2 Ca0 .5MnO3 中存在的Jahn Teller畸变进行了原位的高压研究。实验表明 ,外加压力能有效地影响到晶格中Mn—O键长和Mn—O—Mn键角的变化。当压力为 1.8GPa时 ,在晶格中存在的两种不同畸变模式之间的相互作用下 ,导致了位于a b基面上的Q2 畸变模式的消失     

La_(0.5)M_(0.5)MnO_3(M=Sr,Ba)的水热合成与表征

我们用水热法合成了钙钛矿锰氧化物La0.5M0.5MnO3(M=Sr,Ba)系列样品,研究了制备条件对结构、形貌和磁性的影响.     

脱氧La0.5Ca0.5MnO3样品的铁磁-反铁磁转变和电阻率变化

研究了氧空位对La0.5Ca0.5MnO3 (LCMO)多晶块材的电输运和磁性质的影响. 随着氧空位的增加, 样品在高温段的电阻率一直增加, 并满足绝热小极化子模型, 而低温段的电阻率先下降后上升, 并出现明显的dR/dT>0的行为, 直至最后变为绝缘的. 氧空位的增加抑止了反铁磁相的出现, 使得脱氧的LCMO样品不发生反铁磁转变, 进一步增加氧空位则会抑制铁磁相.     

Effects of Si surficial structure on transport properties of La_(2/3)Sr_(1/3)MnO_3 films

La_(2/3)Sr_(1/3)MnO_3 films are deposited on(001) silicon substrates,in which the silicon surfaces have artificially been treated into the scallops-like,pyramid-like,and smooth polishing structure,by pulsed laser deposition.The magnetoresistances of the films on etched substrates under low applied field are very sensitive to the applied field,and much larger(14.3% for acid-etched,and 42.9% for alkali-etched) than that on the polished Si at 5 K.Zero-field-cooled and field-cooled magnetization behaviors are measured and analyzed.Remarkable upturn behaviors in temperature-dependent resistivity for all samples are observed at low temperature,which follows the Efros-Shkloskii variable range hopping law and the Arrhenius law.We believe that the rough surface may be useful in device design.     

La0．5Er0．2Ca0．3Mno3低温磁电阻效应的实验研究

本文简要介绍对La0．5Er0．2Ca0．3Mno3进行低温电磁测量的实验过程,研究掺杂后复合体系的磁电阻效应。     

Current-Induced Reversible Resistance Jumps in La_(0.8)Ca_(0.2)MnO_3 Microbridge

Two spatially confined La_(0.8)Ca_(0.2)MnO_3(LCMO) microbridges with different widths,starting from a single LCMO film(3mmx5mm),are fabricated by optical lithography.A second new and robust metal-insulator transition(MIT) peak at about 75 K appears,in addition to the normal MIT at 180 K observed in the standard LCMO film.When the two bridges are processed by currents of high densities,interesting reversible resistance jumps are excited only around the new peak.A stronger dependence of resistance jump on current excitation is found for the bridge with a smaller width.The temperature driven transition between new excited multiple metastable states are involved to explain the interesting low-temperature ultra-sharp jumps.     

Ca_3NbGa_3Si_2O_(14)晶体的介电和压电特性

利用Y切和 (yxl) 30°切两种样品测量了Ca3NbGa3Si2 O1 4晶体的介电、压电和部分弹性参数 .计算了 (yxl)θ切型相关压电常数随切角的变化 .与La3Ga5SiO1 4晶体相比 ,Ca3NbGa3Si2 O1 4晶体具有更优良的压电性能 ,其压电常数d1 1=7 93× 10 - 1 2 C N ,d1 4=- 5 88× 10 - 1 2 C N .     

La0.67Ca0.33MnO3薄膜中的各向异性应变与电荷有序

本文采用脉冲激光沉积法在NdGaO3(001)单晶衬底上制备了一系列的La0.67Ca0.33MnO3薄膜,实验主要研究了薄膜的输运性质.La0.67Ca0.33sMnO3块材是铁磁金属基态,而La0.67Ca0.33MnO3/NdGaO3(001)薄膜由于各向异性应变的存在,可以观测到电荷有序绝缘相的出现.薄膜样品表...     

La_(0.8-x)Ca_(0.2)MnO_3纳米颗粒的居里温度与磁热效应

采用溶胶 凝胶法制备了系列La0 .8-xCa0 .2 MnO3 多晶样品 ,用X射线衍射分析确定了样品的钙钛矿结构 ,用透射电子显微镜观察了样品的形貌及粒径分布情况 ,用PAR15 5型振动样品磁强计测量了样品的磁性随外场和温度的变化 ,确定样品的居里温度并计算了各样品的磁熵变 .磁测量及计算结果表明制备的各样品的居里温度在180— 2 6 0K的范围内且随焙烧温度和La3 离子空位浓度的不同而变化 ,不同温度焙烧的样品均有较大的磁熵变值 ,其中 110 0℃焙烧的La0 77Ca0 .2 MnO3,多晶样品在 2 40 5K ,H =1 0T的外场下的磁熵变达 3 76J/kg·K ,对实验结果做了定性的分析 .该材料具有较高的居里温度和较大的磁熵变 ,所需外场强度适中 ,电阻率高 ,性能稳定 ,适合做高温磁制冷材料 .     

La0.67Ca0.33MnO3/NdGaO3(001)薄膜中外延应变诱导的各向异性磁阻效应

本文使用脉冲激光沉积方法在正交的NdGaO3(001)衬底上外延生长了La0.67Cao.33MnO3薄膜.退火后,由于外延应变引起薄膜正交畸变增强,薄膜在低于250K的整个温度区间都出现了铁磁金属态和反铁磁绝缘态的相分离和相竞争.这两相的竞争强烈依赖于磁场相对晶轴的方向,由此导致存在于很宽温度范围内的低场各向异性磁阻...     

基于La_(1.4)Ca_(1.6)Mn_2O_7结构、电输运及磁性研究(英文)

我们制备了名义成分是La1.4 Ca1.6 Mn2 O7的多晶样品,并且研究了它的结构、磁性和电性.利用Rietveld方法对X射线衍射数据进行精修的结果表明,该La1.4 Ca1.6 Mn2 O7是由钙钛矿锰氧化物La0.66 Ca0.34 MnO3和氧化钙CaO组成的复相混合物.其中,La0.66 Ca0.34 MnO3占相成分的大部分,而CaO占小部分.我们对比了该名义组分样品La1.4 Ca1.6 Mn2 O7和La0.7 Ca0.3 MnO3的铁磁居里转变温度和绝缘体-金属转变温度,结果表明该La1.4 Ca1.6 Mn2 O7的磁输运性质是由其中的钙钛矿相成分决定的.所有的这些结果表明,名义组分样品La1.4 Ca1.6 Mn2 O7实际上并没有形成所谓的Sr3Ti2O7型的双层结构,而实际形成的是以钙钛矿结构作为主相的复相混合物.     

Electric current-induced giant electroresistance in La_(0.36)Pr_(0.265)Ca_(0.375)MnO_3 thin films

The electroresistance(ER) of La_(0.36)Pr_(0.265)Ca_(0.375)MnO_3(LPCMO) epitaxial thin film was studied under various dc currents.The current effect was compared for the unpatterned film and patterned microbridge with a width of 50 μm.The value of ER in the unpatterned LPCMO film could reach 0.54 under a 1-mA current,which is much higher than ER under 1 mA for the patterned weak phase-separated La_(0.67)Ca_(0.33)MnO_3 and La_(0.85)Sr_(0.15)MnO_3 microbridges with 50-μm width.More interestingly,for the patterned LPCMO microbridge,the maximum of ER can reach 0.6 under a small current of 100 μ.A.The results were explained by considering the coexistence of ferromagnetic metallic phase with the charge-ordered phase,and the variation of the phase separation with electric current.     

Anisotropic transport properties in the phase-separated La_(0.67)Ca_(0.33)MnO_3/NdGaO_3 (001) films

The anisotropic transport property was investigated in a phase separation La_(0.67)Ca_(0.33)MnO_3(LCMO) film grown on(001)-oriented Nd GaO_3(NGO) substrate. It was found that the resistivity along the b-axis is much higher than that along the a-axis. Two resistivity peaks were observed in the temperature dependent measurement along the b-axis, one located at 91 K and the other centered at 165 K. Moreover, we also studied the response of the resistivities along the two axes to various electric currents, magnetic fields, and light illuminations. The resistivities along the two axes are sensitive to the magnetic field. However, the electric current and light illumination can influence the resistivity along the b-axis obviously, but have little effect on the resistivity along the a-axis. Based on these results, we believe that an anisotropicstrain-controlled MnO_6 octahedra shear-mode deformation may provide a mechanism of conduction filaments paths along the a-axis, which leads to the anisotropic transport property.     

Structural and electrical characterisation of La0.5Ca0.5MnO3 thin films grown by pulsed laser deposition

Thin films of perovskite manganite, with nominal composition La_0.5Ca_0.5MnO₃, have been prepared by pulsed laser deposition on (1 0 0) SrTiO₃, (1 0 0) LaAlO₃, (1 0 0) Si and YSZ/CeO₂-buffered (1 0 0) Si substrates. Structural and electrical characterisation was performed on the films. The magneto-transport properties of all the thin films depart from the bulk behaviour. The LCMO film grown on buffered Si shows an insulator–metallic transition around 130–150 K while the one deposited directly on Si displayed a similar behaviour under a melting field of 1 T. However, that transition is absent in the films grown on LAO and STO. We suggest that appropriate stress values induced by the substrate favour the formation of metallic percolative paths.     

Emergent reversible giant electroresistance in spacially confined La_(0.325)Pr_(0.3)Ca_(0.375)MnO_3 wires

Micro-patterning is considered to be a promising way to analyze phase-separated manganites. We investigate resistance in micro-patterned La0.325Pr0.3Ca0.375MnO3 wires with width of 10 μm, which is comparable to the phase separation scale in this material. A reentrant of insulating state at the metal–insulator temperature Tp is observed and a giant resistance change of over 90% driven by electric field is achieved by suppression of this insulating state. This resistance change is mostly reversible. The I–V characteristics are measured in order to analyze the origin of the giant electroresistance and two possible explanations are proposed.     

电脉冲对多晶La0.7Ca0.3MnO3比热的影响

对电脉冲诱导的不同电阻态下La_0.7Ca_0.3MnO₃样品的比热进行了研究.实验结果表明,电脉冲导致La_0.7Ca_0.3MnO₃样品比热随电阻状态发生可逆变化.比热随电阻状态的减小而减小.低温比热拟合及不同电阻状态下的比热差与温度关系说明,声子对比热的贡献不随电阻状态变化,磁性和载流子对比热的贡献是导致La_0.7Ca_0.3MnO₃样品比热变化的原因.电脉冲诱导O离子沿一维扩展性缺陷的电化学迁移,导致材料中局部区域的O离子浓度发生变化.O离子浓度的变化导致载流子浓度的变化,同时载流子浓度的变化将使得低温下磁性耦合强度发生变化,从而导致比热发生变化. 关键词： 0.7Ca_0.3MnO₃')" href="#">La_0.7Ca_0.3MnO₃ 比热 氧离子迁移     

Cr掺杂对La0.4Ca0.6MnO3电荷有序及自旋玻璃态的影响

用回相反应法制备了La0.4Ca0.6M1-xCrxO3(x=0.00,0.06,0.10)多晶样品.通过XRD、M～T曲线、ESR谱线,研究了Cr替代Mn对La0.4Ca0.6MnO3磁性质的影响及在CE型反铁磁体系中的电荷序和自旋序之间的耦合相互作用.研究结果表明:母体La0.4Ca0 6MnO3磁结构很复杂,在2...     

Y0.125Ca0.875MnO3体系的输运性质与铁磁自旋玻璃行为研究

研究了类稀土锰氧化物Y0.125Ca0.875MnO3的输运性质和磁特性。结果表明,外加磁场对体系的电输运性能有较大影响,在低温时样品表现出磁电阻效应。在外磁场的诱导下,随温度的降低,体系发生了明显的绝缘-金属(I-M)相变,并且在25K出现了类近藤现象。热磁测量表明零场冷(ZFC)和场冷(FC)的磁化强度曲线在118K出现分叉现象。测量了不同频率下的升降温过程的交流磁化率,结果显示在108K附近出现自旋玻璃态。     

Mn位Ru替代对Pr0.5Ca0.5MnO3电磁特性及磁电阻的影响

通过对Mn位Ru替代体系Pr0.5Cao.5Mn1-xRuxO3(0.00≤x≤0.09)的磁性及电输运机制进行研究,发现Ru元素的替代对居里温度Tc、绝缘体-金属相变温度TIM有明显影响,导致了异常电输运及磁电阻行为的出现;随着Ru含量的增加,Tc及TIM均向高温区移动,在外加磁场作用下,电阻率峰值被强烈压缩,从而导...     

Magnetic transition behavior of perovskite manganites Nd_(0.5)Sr_(0.3)Ca_(0.2)MnO_3 polycrystalline

A polycrystalline sample Nd_(0.5)Sr_(0.3)Ca_(0.2)MnO_3 is prepared by the conventional solid state reaction method. The structure and magnetic properties are investigated with x-ray diffraction(XRD) patterns, a superconducting quantum interference device(SQUID), and electron spin resonance(ESR). The sample is in single phase with the space group Pbnm symmetry. With the decrease of temperature, Nd_(0.5)Sr_(0.3)Ca_(0.2)MnO_3 undergoes three magnetic transitions: ferromagnetic transition at TC≈ 210 K, charge-ordering at TCO≈ 175 K, and antiferromagnetic transition at TN= 155 K. In addition, the activation energy Ea ≈ 52.78 me V can be extracted by curve fitting.