Adsorption dynamics over a wide range of breakthrough concentrations

Conclusions A simple method is proposed for carrying out analytical calculations on adsorption dynamics; by its use one can make allowance for longitudinal effects in determining coefficients of external mass transfer and internal diffusion, and dynamic bed activities.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 56–62, January, 1981.     

Bacterial attachment over a wide range of ionic strengths

The number of bacterial cells adhered on a glass surface was counted over a wide range of ionic strengths. The counted number increased linearly with the square root of time. The rate of attachment increased with the increase in ionic strength and then plateaued. The rate of attachment was analyzed on the basis of the potential barrier between the surface of the bacterial cell and that of the substratum. An equation for formulating the dependence of the attachment rate on the ionic strength was proposed, which seems to be useful for the systematic understanding of bacterial attachment in various environments, from terrestrial to marine.     

Stable superhydrophobic polybenzoxazine surfaces over a wide pH range

In this study, we report on a simple two-step casting process designed to create a stable superhydrophobic surface. This method possesses the advantages of being both simple and inexpensive as well as utilizing non-fluorine-containing compounds. Most interestingly, we found that the as-prepared surface possesses superhydrophobic properties not only for pure water but also for corrosive water under both acidic and basic conditions. Furthermore, the superhydrophobic polybenzoxazine surfaces had excellent environmental stability with regard to both heating and organic solvent treatment in terms of the contact angle to water.     

Modeling of gas adsorption equilibrium over a wide range of pressure: a thermodynamic approach based on equation of state

A thermodynamic approach based on the Bender equation of state is suggested for the analysis of supercritical gas adsorption on activated carbons at high pressure. The approach accounts for the equality of the chemical potential in the adsorbed phase and that in the corresponding bulk phase and the distribution of elements of the adsorption volume (EAV) over the potential energy for gas-solid interaction. This scheme is extended to subcritical fluid adsorption and takes into account the phase transition in EAV. The method is adapted to gravimetric measurements of mass excess adsorption and has been applied to the adsorption of argon, nitrogen, methane, ethane, carbon dioxide, and helium on activated carbon Norit R1 in the temperature range from 25 to 70 degrees C. The distribution function of adsorption volume elements over potentials exhibits overlapping peaks and is consistently reproduced for different gases. It was found that the distribution function changes weakly with temperature, which was confirmed by its comparison with the distribution function obtained by the same method using nitrogen adsorption isotherm at 77 K. It was shown that parameters such as pore volume and skeleton density can be determined directly from adsorption measurements, while the conventional approach of helium expansion at room temperature can lead to erroneous results due to the adsorption of helium in small pores of activated carbon. The approach is a convenient tool for analysis and correlation of excess adsorption isotherms over a wide range of pressure and temperature. This approach can be readily extended to the analysis of multicomponent adsorption systems.     

The dynamic properties of plasticized epoxies over a wide frequency range

Summary The dynamic mechanical properties of a class of plasticized epoxies were investigated over a wide temperature range by means of a Rheovibron Viscoelastometer. Master curves for storage and loss moduli were produced by means of the frequency-temperature superposition principle, as well as for relaxation modulus by a conversion formula. The effect of plasticizer percentage on the said parameters, as well as the loss peaks, corresponding to and relaxations was investigated.     

Adsorption and disjoining pressure isotherms of confined polymers using dissipative particle dynamics

The adsorption and disjoining pressure isotherms of polymers confined by planar walls are obtained using Monte Carlo (MC) simulations in the Grand Canonical (GC) ensemble in combination with the mesoscopic technique known as dissipative particle dynamics (DPD). Two models of effective potentials for the confining surfaces are used: one with both an attractive and a repulsive term and one with a purely repulsive term. As for the polymer, seven-bead linear model of polyethylene glycol (PEG) dissolved in water is used. The results indicate remarkably good agreement between the trends shown by our adsorption isotherms and those obtained from experiments of PEG on oxide surfaces. Additionally, the disjoining pressure isotherm of water shows oscillations, while those of PEG display the same trend for both wall models. Moreover, it is found that the disjoining pressure isotherms are in qualitative agreement with those from experiments on confined linear polymers.     

A triarylboron-based fluorescent thermometer: sensitive over a wide temperature range

Feeling blue: the luminescence of a triarylboron compound has a high quantum yield (at least 0.64) over a wide temperature range (-50 to +100 °C) and changes from green to blue as the temperature is increased. The luminescence color was determined by the population of the two distinct excited-state conformations-a local excited state (high temperature) and a twisted intramolecular charge-transfer state (low temperature).     

The H+NO recombination reaction over a wide temperature range

Rate coefficients of the title reaction have been measured in a high‐temperature photochemistry (HTP) reactor using Ar as the bath gas. H atoms were generated by flash photolysis of NH₃ and their relative concentrations were monitored by resonance fluorescence. The data are best fitted by k(295–905 K) = 6.5 × 10^?34 (T/K)^0.206 exp(780K T) cm⁶ molecule^?2 s^?1, with ±2σ precision values varying from 16 to 36% and corresponding suggested accuracy levels of 29–42%. Using a literature value for the relative collision efficiencies of N₂ and Ar indicates that for N₂ as the third body the above rate coefficient expression should be multiplied by 1.6. This leads to good agreement with two recent near 1000 K measurements. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 374–380, 2003     

Dielectric constants of fluid mixtures over a wide range of temperature and density

A new expression is presented for estimating the dielectric constant of a fluid mixture as a function of temperature, density and composition. The estimated dielectric constants (and their derivatives) are required for phase-equilibrium calculations, based on an equation of state, for systems containing electrolytes and nonelectrolytes. The new expression holds for the entire range of fluid densities, from zero to liquid-like densities. Mixing of components is performed on a volume-fraction basis at constant temperature and constant reduced density. For polar components where data are not available at the temperature and/or reduced density of interest, the well-characterized behavior of water is used to extrapolate the available pure-component data. The importance of using the correct density of the mixture is shown. Using one adjustable parameter for each nonideal binary subsystem, predicted results can be significantly improved.     

Effect of size in oxygen electroreduction on gold over a wide range of pH

The electroreduction of molecular oxygen on polycrystalline gold and 20Au/C nanoparticles synthesized on XC72R soot is studied over a wide range of pH. Changes in the character of the polarization curves and a considerable increase in half-wave potential (～100 mV) upon transitioning from a compact to a nanodisperse metal were established. A triple increase in the exchange currents is observed for nanoparticles relative to polycrystalline gold. It is suggested that the enhancement of the catalytic activity of a nanodisperse metal is a result of changes in the electronic structure of the d-sublevel of surface atoms.     

19F NMR chemical shifts of CF4 in CO2 over a wide pressure range at different temperatures

¹⁹F NMR chemical shifts of CF₄ in CO₂ under extremely dilute concentrations were precisely determined at 299.8, 314.4 and 328.9 K over a wide range of pressure between 0.4 and 33 MPa. The solvent‐induced chemical shift, where the bulk magnetic susceptibility correction was made, was quantitatively expressed as a function of CO₂ density. Copyright © 2002 John Wiley & Sons, Ltd.     

Determination of nitrogen diffusivities in liquid cyclohexane over a wide temperature range

The diffusivity of nitrogen in liquid cyclohexane has been measured at temperatures from 21 °C to 140 °C and at pressures of 10 – 15 atm, using a high pressure wetted sphere absorber apparatus. The diffusivity increased from 4.0 × 10⁻⁵ cm² s⁻¹ to 2.8 × 10⁻⁴ cm² s⁻¹ over this temperature range.Rippling of the film at the higher flow rates restricted the flow rate range which could be utilized for the diffusivity determinations. The measured absorption rates for flows in which rippling occurred were up to 15% higher on a 20 mm sphere and up to 40% higher on a 30 mm sphere. This limited the suitability of the wetted sphere absorber for this type of work.     

Adsorption of di-2-pyridyl ketone salicyloylhydrazone on silica gel: characteristics and isotherms

The adsorption of DPKSH onto silica gel was investigated, at 25±1 °C and pH 1, 4.7 and 12. For the same DPKSH concentration interval, the minimum required time of contact for adsorption maximum at pH 4.7 was smaller than at pH 1 and the maximum amount of DPKSH adsorbed per gram of silica at pH 1 is smaller than at pH 4.7. At pH 12 the DPKSH adsorption onto silica gel was not significant. The adsorption data followed Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms. The maximum amount of solute adsorbed (m_ads^max) and the adsorption constant, K_L, were derived from Langmuir isotherm. The Freundlich constants 1/n and K_F related, respectively, to the energetic heterogeneity of adsorption sites and an empirical constant were evaluated. The mean sorption free energy (E) of DPKSH adsorption onto silica gel was calculated from D-R isotherm indicating a physical adsorption mode. Finally, conductimetric titrations showed the silica particle basicity and acidity as 0.002 and 0.3 mmol g⁻¹, respectively.     

Beyond the lotus effect: roughness influences on wetting over a wide surface-energy range

To enhance our understanding of liquids in contact with rough surfaces, a systematic study has been carried out in which water contact angle measurements were performed on a wide variety of rough surfaces with precisely controlled surface chemistry. Surface morphologies consisted of sandblasted glass slides as well as replicas of acid-etched, sandblasted titanium, lotus leaves, and photolithographically manufactured golf-tee shaped micropillars (GTMs). The GTMs display an extraordinarily stable, Cassie-type hydrophobicity, even in the presence of hydrophilic surface chemistry. Due to pinning effects, contact angles on hydrophilic rough surfaces are shifted to more hydrophobic values, unless roughness or surface energy are such that capillary forces become significant, leading to complete wetting. The observed hydrophobicity is thus not consistent with the well-known Wenzel equation. We have shown that the pinning strength of a surface is independent of the surface chemistry, provided that neither capillary forces nor air enclosure are involved. In addition, pinning strength can be described by the axis intercept of the cosine-cosine plot of contact angles for rough versus flat surfaces with the same surface chemistries.     

Imines that react with phenols in water over a wide pH range

Cyclic imine derivatives that react with phenols, including tyrosine residues of peptides, have been developed. Reactions of the imines with phenols proceeded in water over a wide pH range (pH 2-10) at room temperature to 37 degrees C and afforded Mannich products without the need of additional catalysts.