Structural studies of lithium 4,4-difluoro- and 4,4,4-trifluoro-3-oxybutenoates

The condensation of ethyl difluoroacetate or ethyl trifluoroacetate with ethyl acetate in the presence of lithium hydride afforded lithium ethyl 4,4-difluoro- and ethyl 4,4,4-trifluoro-3-oxybutenoates, respectively. The structures of the complexes were established by X-ray diffraction.     

Isobaric vapor–liquid equilibria of binary system ethyl acetate + ethyl benzene + lithium bromide

The isobaric vapor–liquid equilibrium (VLE) behaviors for binary system, ethyl acetate + ethyl benzene, and ethyl acetate + ethyl benzene + LiBr (at saturation) were studied at the local ambient pressure (707 ± 1 mmHg). Equilibrium still was used where both liquid and vapor were continuously circulated. The experimental results showed that salt-free ethyl acetate + ethyl benzene system does not form an azeotrope point. The experimental results for ethyl acetate + ethyl benzene system were in a very good agreement with the predicted results using UNIFAC, UNIQUAC, NRTL, and Wilson models. Adding LiBr, as a salt, did show slight effects on the VLE behavior of ethyl acetate + ethyl benzene system.     

沙枣花净油化学成份的研究

用GC-MS-DS技术对沙枣花净油的化学成份进行了研究。其主要成份为反式肉桂酸乙酯。其它成份有:3-甲基己醛、苯甲醛、壬醛、苯甲酸乙酯、癸醛、苯乙酸乙酯、7-甲基十三烯-6、顺式肉桂酸乙酯、肉桂酸甲酯、肉桂酸异丙酯、正十七烷、苯乙烯基异丙基酮、6,10,14-三甲基十五酮-2、棕榈酸乙酯、棕榈酸、正二十一烷、油酸乙酯、硬酯酸乙酯、正二十八烷和花生油酸乙酯。     

Characteristic aroma compounds from different pineapple parts

Characteristic aroma volatile compounds from different parts of cayenne pineapple were analyzed by headspace-solid phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC/MS). The main volatile compounds were esters, terpenes, ketones and aldehydes. The number and content of aroma compounds detected in pulp were higher than those found in core. In pulp, the characteristic aroma compounds were ethyl 2-methylbutanoate, ethyl hexanoate, 2,5-dimethyl-4-hydroxy-3(2H)-furanone (DMHF), decanal, ethyl 3-(methylthio)propionate, ethyl butanoate, and ethyl (E)-3-hexenoate; while in core the main compounds were ethyl 2-methylbutanoate, ethyl hexanoate and DMHF. The highest odor units were found to correspond to ethyl 2-methylbutanoate, followed by ethyl hexanoate and DMHF. The odor units found for pulp were higher than those for core.     

Vapor-liquid equilibria for binary mixtures of carbon dioxide and fatty acid ethyl esters

Vapor-liquid equilibria were measured and correlated using the Peng-Robinson equation of state for five binary systems of carbon dioxide and fatty acid ethyl esters (ethyl stearate, ethyl oleate, ethyl linoleate, ethyl eicosapentanoate, ethyl docosahexanoate) at 313.15 K, 323.15 K and 333.15 K. Solubility in CO₂ of fatty acid ethyl esters of equal chain length but of various degrees of unsaturation was compared. Although there was no distinct difference in solubility at lower pressures, at higher pressures (more than 15 MPa), those with a higher degree of unsaturation showed a slightly higher solubility. When the solubility in CO₂ of methyl esters and the corresponding ethyl esters were compared, it was noted that the former showed a slightly higher solubility at all system pressures measured in this work.     

Synthesis and alkylation of new functionally substituted 4,4-dimethylpiperidin-2-ones

The reaction of ethyl isopropylidenecyanoacetate with ethyl 3-amino-3-thioxopropanoate gave rise to ethyl 4,4-dimethyl-6-oxo-2-thioxo-5-cyanopiperidine-3-carboxylate whose alkylation provided ethyl 2-benzylsulfanyl-4,4-dimethyl-6-oxo-5-cyano-1,4,5,6-tetrahydropyridine-3-carboxylate, ethyl 5-benzyl-2-benzylsulfanyl-4,4-dimethyl-6-oxo-5-cyano-1,4,5,6-tetrahydropyridine-3-carboxylate, and ethyl 7,7-dimethyl-5-oxo-6-cyano-3,5,6,7-tetrahydro-2H-thiazolo[3,2-a]pyridine-8-carboxylate.     

Thermal,morphological, and mechanical properties of ethyl vanillin immobilized in polyvinyl alcohol by electrospinning process

In this study, polyvinyl alcohol (PVA) nanofibers with ethyl vanillin as an active compound were prepared using electrospinning technique. The final products of electrospinning process were in the form of nanofibers films. PVA/ethyl vanillin nanofibers, having fibers diameters in the range 100–1700 nm, were successfully electrospun from ethanol/water mixture of PVA and ethyl vanillin. The effects of immobilization process on ethyl vanillin thermal properties were investigated by differential scanning calorimetry (DSC). The results of DSC showed significant influence of immobilization process on thermal properties of ethyl vanillin. It was noticed that melting point of immobilized ethyl vanillin was lower (~55 °C) compared to free flavor (~77 °C). Our results showed that films based on PVA/ethyl vanillin nanofibers are mechanically stable.     

A Novel One‐Pot Synthesis of Substituted Quinolines

A synthesis of quinoline derivatives is described via reaction between ethyl bromopyruvate (=ethyl 3‐bromo‐2‐oxopropanoate), acetylenedicarboxylate, and isatin (=1H‐indole‐2,3‐dione) in the presence of NaH as a base. Also, these reactions were performed without ethyl bromopyruvate. The reaction in the presence of ethyl bromopyruvate provides regioselectively a quinoline with the ethyl ester group in 4‐position. In the absence of ethyl bromopyruvate, the reaction leads to functionalized quinolines with the same ester groups in 2‐, 3‐, and 4‐positions.     

6-氨基-2-取代吲哚-3-羧酸乙酯及其衍生物的合成与生物活性评价

以2,4-二硝基氯苯和乙酰乙酸乙酯为原料, 经过亲核置换、还原-环化协同反应, 合成了6-氨基-2-甲基吲哚-3-羧酸乙酯, 而后在催化剂作用下, 与乙酰乙酸乙酯反应生成烯胺, 环化合成9-羟基-2,7-二甲基吡咯(2,3-f)喹啉-3-羧酸乙酯; 类似地, 合成了6-氨基-2-苯基吲哚-3-羧酸乙酯和6-氨基-2-(呋喃-2'-基)吲哚-3-羧酸乙酯. 其结构均由¹H NMR, IR以及MS波谱数据表征. 所得化合物具有抑制肺癌A549细胞生长的活性, 其抑制效果具有浓度依赖性.     

2-(4-羟基苯基)-3,3,3-三氟丙酸乙酯的合成研究

报道了以苯酚和三氟丙酮酸乙酯为起始原料,在温和条件下合成高产率的2-(4-羟基苯基)-3,3,3-三氟丙酸乙酯的一条新途径.该途径包括无水碳酸钾催化的苯酚与三氟丙酮酸乙酯间的亲电取代反应、由此形成的产物的选择性侧连羟基的氯代反应和随后的硼氢化钠还原反应.     

An efficient three-component domino synthesis of difluoromethyl-containing 1,4-dihydropyridines under solvent and catalyst free conditions

The difluoromethyl-containing Hantzsch 1,4-dihydropyridines were synthesized in good yields by a one-pot cyclocondensation of ethyl difluoroacetoacetate (EDFAA), a variety of aromatic aldehydes and ammonium acetate under solvent and catalyst free conditions. The comparison of reaction conditions and products was made among the different 1,3-carbonyl substrates (ethyl acetoacetate, ethyl difluoroacetoacetate and ethyl trifluoroacetoacetate) for the Hantzsch reaction.     

Hydrofluorination and bromofluorination of halogeno-substituted ethyl cinnamates and related compounds

We have effected bromofluorination of six olefins (unsubstituted and α or β halogeno-substituted ethyl cinnamates) and ethyl propiolate with N-bromosuccinimide: hydrofluoric acid: pyridine and the hydrofluorination of two β halogeno-ethyl cinnamates and ethyl propiolate with hydrofluoric acid: pyridine. The bromofluorination proceeds with Markovnikov-type and α-halogeno-substituted ethyl cinnamates but faster and not stereospecific for the β-substituted ones and ethyl propiolate. This difference is interpreted for cinnamates as a change in transition state from a bridged bromonium ion to an open-chain ion.     

Catalytic ketonization over oxide catalysts, Part VI.a Cross-ketonization of aliphatic and aromatic esters

Activity of 20 wt.% MO₂/Al₂O₃ catalysts, where M = Mn, Ce and Zr has been studied in cross-ketonization of ethyl esters of aliphatic and aromatic acids in a flow system. Pentan-3-one and tridecan-7-one were formed in ketonization of pure aliphatic esters, ethyl propanoate and ethyl heptanoate. Benzene was obtained instead of diphenylmethanone as the product of ethyl benzoate transformations. Only two ketones, dialkyl and aralkyl, were obtained from the cross-ketonization of a mixture of aliphatic and aromatic esters. The highest yield of 1-phenyl-1-heptanone (70%) from ethyl heptanoate and ethyl benzoate was reached at 698 K in the presence of MnO₂/Al₂O₃ catalyst. Under similar conditions cross-ketonization of a mixture of ethyl propanoate and ethyl benzoate led to 1-phenyl-1-propanone (60% at 673 K).     

中草药地牯牛幼虫乙醇提取物GC/MS分析

通过对中草药地牯牛幼虫乙醇提取物进行GS／MS分析,发现该虫提取物中主要化学成分是脂肪羧酸和脂肪羧酸酯,其中Z,Z-9,12一十八碳二烯酸和Z-9-十八碳烯酸乙酯分别占出峰面积的22．24％和23．83％,十二烷酸乙酯、十六烷酸乙酯、十四烷酸乙酯和十四烷酸分别占出峰面积的10．00％、16．12％、11．11％和8．13％,共占峰面积的91．47％。     

Effect of the content of ethyl cellulose-rubber blend on physicochemical properties of adhesive compositions

Results of comprehensive systematic physicochemical studies of the blends of ethyl cellulose and butadiene-acrylonitrile rubbers are reported. It is shown that the addition of butadiene-acrylonitrile rubbers to ethyl cellulose results in the formation of ethyl cellulose-butadiene-acrylonitrile rubber thermoelastoplastic complexes due to the elastification of the thermoplastic polymorphous structure of ethyl cellulose with enhanced impact strength and heat resistance.     

Determination of eight fatty acid ethyl esters in meconium samples by headspace solid‐phase microextraction and gas chromatography–mass spectrometry

A number of fatty acid ethyl esters (FAEEs) have recently been detected in meconium samples. Several of these FAEEs have been evaluated as possible biomarkers for in utero ethanol exposure. In the present study, a method was optimized and validated for the simultaneous determination of eight FAEEs (ethyl laurate, ethyl myristate, ethyl palmitate, ethyl palmitoleate, ethyl stearate, ethyl oleate, ethyl linoleate and ethyl arachidonate) in meconium samples. FAEEs were extracted by headspace solid‐phase microextraction. Analyte detection and quantification were carried out using GC‐MS operated in chemical ionization mode. The corresponding D5‐ethyl esters were synthesized and used as internal standards. The LOQ and LOD for each analyte were <150 and <100 ng/g, respectively. The method showed good linearity (r²>0.98) in the concentration range studied (LOQ – 2000 ng/g). The intra‐ and interday imprecision, given by the RSD of the method, was lower than 15% for all FAEEs studied. The validated method was applied to 63 authentic specimens. FAEEs could be detected in alcohol‐exposed newborns (>600 ng/g cumulative concentration). Interestingly, FAEEs could also be detected in some non‐exposed newborns, although the concentrations were much lower than those measured in exposed cases.     

Reaction of alkyl 2-chloro-1,1,2-irifluoroethyl ethers with lewis acids

Ethyl 2-chloro-1,1,2-trifluoroethyl ether heated with boron trifluoride etherate gave ethyl fluoride and chlorofluoroacetyl fluoride. When heated with aluminum chloride, it afforded a mixture of ethyl fluoride, ethyl chloride, chlorofluoroacetyl fluoride, and chlorofluoroacetyl chloride. Treatment of the acyl halides with ethanol yielded ethyl chloro- fluoroacetate. Butyl and octyl 2-chloro-1,1,2-trifluoroethyl ethers gave directly butyl and octyl chlorofluoroacetates, respectively, under similar conditions.     

Reactivity of thienopyrroles. Synthesis of isomeric nitro and bromothienopyrroles

The preparation of ethyl 2-bromothieno[2,3-b]pyrrole-5-carboxylate, ethyl 2-bromothieno[3,2-b]pyrrole-5-carboxylate, ethyl 2-nitrothieno[2,3-b]pyrrole-5-carboxylate and ethyl 2-nitrothieno[3,2-b]pyrrole-5-carboxylate are described.     

Synthesis and michael reaction of 3,4-dimethylpyrrole

A two step synthesis of 3,4-dimethylpyrrole via the reduction of 3-carboethoxy-4-methyl-pyrrole is described. Michael addition of methyl vinyl ketone and butyn-2-one to 3,4-dimethylpyrrole gives the bisadducts, 2,5-bis(3-oxobutyl)-3,4-dimethylpyrrole and 2,5-bis(3-oxobutenyl)-3,4-dimethylpyrrole, respectively, while ethyl propiolate affords only the monoadduct, ethyl 3-(3,4-dimethylpyrrol-2-yl)propenoate. Catalytic reduction of the latter ester gives ethyl 3-(3,4-dimethylpyrrol-2-yl)propanoate which with ethyl propiolate gives ethyl 3-(5-carbethoxyethyl-3,4-dimethyl-2-yl)propenoate.     

Determination of sulfonate ester genotoxic impurities in imatinib mesylate by gas chromatography with mass spectrometry

Methyl methanesulfonate and ethyl methanesulfonate are potential genotoxic impurities in imatinib mesylate. In this work, a simple, sensitive, reliable, and fast gas chromatography with mass spectrometry method for the simultaneous determination of methyl methanesulfonate and ethyl methanesulfonate was developed and validated. Total analysis time was only 7 min. An n‐hexane/water solution was used to dissolve samples, and then extracted‐ion‐chromatogram mode was used to quantify methyl methanesulfonate and ethyl methanesulfonate. Calibration curves showed good linearity over the studied range for methyl methanesulfonate and ethyl methanesulfonate. The correlation coefficient of fit exceeded 0.999 for each impurity. The LOD and LOQ of methyl methanesulfonate and ethyl methanesulfonate were as low as 0.001 and 0.005 μg/mL, respectively, with RSDs of the peak area within 1.06–1.96%. Method accuracy was within 97.2–99.8% for methyl methanesulfonate and ethyl methanesulfonate. Therefore, this method can be used to quantify methyl methanesulfonate and ethyl methanesulfonate impurities at extremely low levels in imatinib mesylate.