四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1:1的甲醇-水混合溶液在纳米碳管(CNT)中的静态结构以及输运行为.研究发现:在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失.另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

BAB‐random‐C Monomer Sequence via Radical Terpolymerization of Limonene (A), Maleimide (B), and Methacrylate (C): Terpene Polymers with Randomly Distributed Periodic Sequences

A naturally abundant terpene, limonene (A), was radically polymerized with a maleimide derivative (B) and methacrylate (C) in a fluorinated alcohol to give terpolymers with unprecedented BAB‐random‐C sequences in which the BAB monomer sequence was randomly copolymerized with a C unit. In each binary system, limonene was hardly copolymerized with methacrylate while it was efficiently copolymerized with maleimide to result in a 1:2‐alternating BAB periodic sequence, in part due to the penultimate effects and hydrogen‐bonding interactions with fluoroalcohol. Methacrylate and maleimide were randomly copolymerized to give copolymers rich in methacrylate units with minimal amounts of maleimide–maleimide sequences. Their terpolymerization resulted in a BAB‐r‐C sequence as a consequence of the selective BAB polymerization between limonene and maleimide, the random copolymerization between methacrylate and maleimide, and the lack of copolymerization between limonene and methacrylate.     

STUDY ON A HYDROPHOBIC-HYDROPHILIC GRADIENT ROD

INTRODUCTIONGradient materials constitute a special case of various materials. The concentration of one of the components ofthe material, being chemically and/or physically different from other components, is allowed to change as afunction of its position in the sample, producing a predetermined gradient profile. The gradient material can be inany shape — i.e., linear, sigmoid, parabolic, flat or rod. Generally, this kind of material should have gradientsalong one direction in their stru…     

Electrochemical Detection Using an Engraved Microchip – Capillary Electrophoresis Platform

The present study describes a simple strategy to integrate electrochemical detection with an assembled microchip‐capillary electrophoresis platform. The electrochemical cell was integrated with a microfluidic device consisting of five plastic squares interconnected with fused silica capillaries, forming a four‐way injection cross between the separation channel and three side‐arms (each of 15 mm in length) acting as buffer/sample reservoirs. The performance of the system was evaluated using electrodes made with either carbon ink, carbon nanotubes, or gold and under different experimental conditions of pH, capillary length, and injection time. Using this system it was possible to separate the neurotransmitters dopamine and cathecol and to quantify phenol from a real sample using a linear calibration curve with a calculated LOD of 0.7 µM. A similar concept was applied to determine glucose, by including a pre‐reactor filled with beads modified with glucose oxidase (GOx). The latter system was used to determine glucose in a commercial sample, with a recovery of 95.2 %. Overall, the presented approach represents a simple, inexpensive, and versatile approach to integrate electrochemical detection with CE separations without requiring access to microfabrication facilities.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1：1 的甲醇-水混合溶液在纳米碳管（CNT）中的静态结构以及输运行为. 研究发现：在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失. 另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

Selection of anion exchangers for detoxification of dilute-acid hydrolysates from spruce

Six anion-exchange resins with different properties were compared with respect to detoxification of a dilute-acid hydrolysate of spruce prior to ethanolic fermentation with Saccharomyces cerevisiae. The six resins encompassed strong and weak functional groups as well as styrene-, phenol-, and acrylic-based matrices. In an analytical experimental series, fractions from columns packed with the different resins were analyzed regarding pH, glucose, furfural, hydroxymethylfurfural, phenolic compounds, levulinic acid, acetic acid, formic acid, and sulfate. An initial adsorption of glucose occurred in the strong alkaline environment and led to glucose accumulation at a later stage. Acetic and levulinic acid passed through the column before formic acid, whereas sulfate had the strongest affinity. In a preparative experimental series, one fraction from each of six columns packed with the different resins was collected for assay of the fermentability and analysis of glucose, mannose, and fermentation inhibitors. The fractions collected from strong anion-exchange resins with styrene-based matrices displayed the best fermentability: a sevenfold enhancement of ethanol productivity compared with untreated hydrolysate. Fractions from a strong anion exchanger with acrylic-based matrix and a weak exchanger with phenol-based resin displayed an intermediate improvement in fermentability, a four- to fivefold increase in ethanol productivity. The fractions from two weak exchangers with styrene- and acrylic-based matrices displayed a twofold increase in ethanol productivity. Phenolic compounds were more efficiently removed by resins with styrene-and phenol-based matrices than by resins with acrylic-based matrices.     

On the Donor Ability of the Phosphaneiminato Substituent and Cube Formation with Transition Metal Fragments

The particular role of the phosphaneiminato ligand as a donor is investigated for a) nitrenes (phosphinidenes) and carbenes and b) cubane formation with transition metals. Accordingly, and as shown for the case a) the ligand is a stronger π‐donor than an amino group and can be considered as a special case of imine‐type substituents. The latter are very effective in π‐donation. In the case b), i.e. the cubane formation with transition metals, one has to consider transition metals with a partially or completely filled d‐shell (with electrons). Hence depending on the transition metal, cubanes are build with weak ferromagnetic coupled or closed shell systems. For the cubanes with closed shell character the matter of insertion of halide anions is discussed. In the last chapter of the review the bond stretching in the dithionitrosyl complexes with rhenium is characterized.     

Ring-opening cross-metathesis (ROCM) as a novel tool for the ligation of peptides

The development of ring-opening cross-metathesis (ROCM) as a novel tool for the site-specific ligation of peptide units is reported. The resulting structural units at the site of ligation resulting from ROCM resemble proline as well as other known beta-turn stabilising structural units. ROCM under mild reaction conditions between a variety of peptides bearing a cyclic olefin with amino acids or peptides results in high yields. The peptidic cross-partners for metathesis are equipped with double bonds via the N and the C terminus and the side chain, respectively, to allow the synthesis of linear as well as non-linear and branched peptides. The ligation in this manner succeeds with low catalyst loadings, with no need for any excess of one reaction partner and with a high compatibility with a wide range of functional groups. Furthermore, the stereochemical outcome of the ROCM can easily be controlled by using a Hoveyda-type chiral catalyst. Fluorescence labelling of peptides is possible in the same manner when using a cyclic olefin equipped with a fluorescence marker.     

Synthesis and photochemistry of side-chain liquid crystal polymers based on cinnamate esters

The syntheses of three methacrylate monomers with cinnamate ester side-chains and of a further monomer with a corresponding cinnamide side-chain are described. Two of the monomers, with isomeric structures, were thermotropic liquid crystals. Although the clearing points were very similar the crystal melting points differed by 8°C. One compound also exhibited a monotropic smectic phase, behavior not shown by its isomer. The other two monomers were not liquid crystalline. The monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with methyl methacrylate. In the case of one of the mesogenic ester monomers, copolymers with a cyanophenyl benzoate monomer were also prepared. Three of the four monomers formed thermotropic liquid crystalline homopolymers and the copolymers with the benzoate monomer were also liquid crystalline. The monomers were considered as photoactive components of polymeric liquid crystals. As a preliminary investigation of their photochemistry, copolymers with methyl methacrylate were prepared and irradiated in solution with a broad-band source. Under these conditions two of the materials show a facile photo-Fries rearrangement of the aryl cinnamate ester group. © 1992 John Wiley & Sons, Inc.     

Biology-oriented synthesis of stereochemically diverse natural-product-derived compound collections by iterative allylations on a solid support

A strategy aiming at the introduction of stereocenters into polymer-bound natural-product-derived and -inspired compound collections is presented. Treatment of immobilized aldehydes with Brown's pinene-derived allylboranes results in the stereoselective formation of homoallylic alcohols with up to 89 % ee (ee=enantiomeric excess). Subsequent iterative ozonolysis-allylation sequences with up to three allylations on a solid support give access to 1,3-polyols with different relative configurations. Esterification with acryloyl chloride and final ring-closing metathesis yields alpha,beta-unsaturated delta-lactones with multiply oxygenated side chains, a substructure found in a group of natural products with a broad range of biological activity. The flexibility of the approach is exemplified by the parallel synthesis of all eight diastereomers of cryptocarya diacetate on a solid support. The individual isomers are obtained in overall yields of 40-60 % over 10 steps and with 63-85 % diastereoselectivity for the major isomer.     

Determination of cholesterol and triglycerides in serum lipoproteins using flow field-flow fractionation coupled to gas chromatography-mass spectrometry

Asymmetric flow field flow fractionation (AsFlFFF) was combined with pyrolysis-gas chromatography mass spectrometry for a sized based fractionation and a detailed compositional study of the triglycerides and cholesterol associated with the various lipoprotein subclasses present in human serum. Serum samples were injected in the AsFlFFF instrument and fractionated with a time-delayed exponential decay cross flow program. The fractions collected after AsFlFFF elution were injected into a programmable temperature vaporizer (PTV) GC-injector, containing a fritted liner. A temperature and split-flow program for the PTV injector was optimized for the thermally assisted hydrolysis and methylation of the compounds of interest. The resulting fatty acid and cholesterol methyl esters were separated by GC and characteristic fragment ions were detected by MS. The system was optimized and calibrated with triglyceride and cholesterol standards for quantitative analysis. The possible interference by phospholipids with the quantitative results was investigated and found to be of minor importance.The concentrations and lipoprotein profiles of triglycerides and cholesterol were determined in a pooled serum sample of healthy volunteers and a serum sample of a sepsis patient. The results obtained with the GC–MS approach were compared with those of a previously developed method based on AsFlFFF with a dual enzymatic reaction detection system. A good agreement of the profiles was found, for cholesterol as well as for the triglycerides, even when the GC–MS method quantifies the fatty acids while with the enzymatic reaction method the glycerol concentrations are determined. Total cholesterol and triglyceride concentration values for the serum samples showed good agreement with the results of the standard enzymatic method as used in practice in the university hospital.     

CHLOROSULFONATION OF SOME CRISSCROSS CYCLOADDUCTS FROM ISOCYANATES AND DIARYL AZINES

Abstract

Reaction of chlorosulfonyl isocyanate (1) with arylaldehyde azines (7) gave the 2:1 crisscross adducts (8);attempts to prepare a disulphonamide of 8a gave only a mixture of the monosulfamide 9 and the diureide 10. The latter with trichloromethanesulfenyl chloride afforded the derivative 12a. and with chlorosulfonic acid hydrazinodicarbonamide (11). The azine 7a with benzoyl isocyanate (2) gave the expected crisscross adduct 13. With thiobenzoyl isocyanate (3) however, both 7a and 7d gave the 1: 1 adducts (14). whereas 7c gave a different 2: 1 adduct (15). Treatment of 14a with 1 gave the ureide 16. With both methyl isocyanate (4) and phenyl isocyanate (S), 7a gave the expected crisscross adducts (17a and b), and 7c with 5 similarly gave 17c. When 7a was treated with 1 followed by aqueous potassium iodide, the diureide (10) was formed; concentrated nitric acid converted 10 into the triazolenone (18). Treatment of 18 with chlorosulfonic acid-thionyl chloride gave the sulfonyl chloride (19) which was characterised as the sulfonamides (20 a-d).

Diarylsulfamoyl azines (21 a-f) with 1 and potassium iodide, gave the diureides 22 a-f. 4-Methoxy-3-sulfamoylbenzaldehydeazines (23 a-c) reacted with 3 to give the 1: I adducts 24 a-c, while 4-chlorosulfonylphenyl isocyanate (6) with benzaldehyde azine (7a) gave the bis-chlorosulfonyl adduct (25a). characterised as the diethylsulfonamide 25b. Attempted chlorosulfonation of the tetraphenyl cycloadduct 17b did not give the tetrasulfonyl chloride (although the reaction was successful with the more reactive rnethoxy adduct 17c); the tetrasulfonyl chloride (26a) was converted into 3 sulfonamides (26 b-d). The unsymmetrically-substituted diaryl azines (27) reacted with 1 and potassium iodide to yield the diureides 28 a-f. Analogous cycloadditions of 1 with several keto azines were unsuccessful. Selected compounds will be screened for medicinal and pesticidal activity; compounds 9,10 and 12a showed fungicidal activity against barley powdery mildew.     

Comparison of Bifurcated Halogen with Hydrogen Bonds

Bifurcated halogen bonds are constructed with FBr and FI as Lewis acids, paired with NH₃ and NCH bases. The first type considered places two bases together with a single acid, while the reverse case of two acids sharing a single base constitutes the second type. These bifurcated systems are compared with the analogous H-bonds wherein FH serves as the acid. In most cases, a bifurcated system is energetically inferior to a single linear bond. There is a larger energetic cost to forcing the single σ-hole of an acid to interact with a pair of bases, than the other way around where two acids engage with the lone pair of a single base. In comparison to FBr and FI, the H-bonding FH acid is better able to participate in a bifurcated sharing with two bases. This behavior is traced to the properties of the monomers, in particular the specific shape of the molecular electrostatic potential, the anisotropy of the orbitals of the acid and base that interact directly with one another, and the angular extent of the total electron density of the two molecules.     

Bioorthogonal SERS Nanoprobes for Mulitplex Spectroscopic Detection,Tumor Cell Targeting,and Tissue Imaging

A surface‐enhanced Raman scattering (SERS) technique shows extraordinary features for a range of biological and biomedical applications. Herein, a series of novel bioorthogonal SERS nanoprobes were constructed with Gold nanoflower (AuNF) and Raman reporters, the signals of which were located in a Raman‐silent region of biological samples. AS1411 aptamer was also co‐conjugated with AuNF through a self‐assembled monolayer coverage strategy. Multiplex SERS imaging using these nanoprobes with three different bioorthogonal small‐molecule Raman reporters is successfully achieved with high multiplexing capacity in a biologically Raman‐silent region. These Raman nanoprobes co‐conjugated with AS1411 showed high affinity for tumor cells with overexpressed nucleolin and can be used for selective tumor cell screening and tissue imaging.     

Defect-Free Synthesis of a Fully π-Conjugated Helical Ladder Polymer and Resolution into a Pair of Enantiomeric Helical Ladders**

Fully π-conjugated ladder polymers with a spiral geometry represent a new class of helical polymers with great potential for organic nanodevices, but there is no precedent for an optically active helical ladder polymer totally composed of achiral units. We now report the defect-free synthesis and resolution of a fully π-conjugated helical ladder polymer with a rigid helical cavity, which has been achieved by quantitative and chemoselective acid-promoted alkyne benzannulations of a rationally designed, random-coil achiral polymer followed by chromatographic enantioseparation. Because of a sufficiently high helix-inversion barrier, the isolated excess one-handed helical ladder polymer with a degree of polymerization of more than 15 showed a strong circular dichroism with a dissymmetry factor of up to 1.7×10⁻² and is thermally stable, maintaining its optical activity in solution even at 100 °C, as well-supported by molecular dynamics simulation.     

Association of calcium phosphate and fibroblast growth factor-2: a dynamic light scattering study

The size distributions of fibroblast growth factor-2 (FGF-2) in aqueous solutions with neutral pH were investigated with a dynamic light scattering technique. We found that the FGF-2 was distributed in dimer or trimer form at concentrations of 0.1-1.0 mg . mL(-1). An aggregate with a hydrodynamic radius of approximately 90 nm coexisted with this and its proportion increased with a decrease in concentration. At lower concentrations (less than 0.10 mg . mL(-1)) FGF-2 aggregates with an average radius of 80-100 nm were dominant and were stable for more than a day. These FGF-2 solutions were mixed with calcium phosphate solutions to produce a sub-micron sized compound of FGF-2 and hydroxyapatite, which could be used as a biological implant that possessed a pharmacological function for bone formation. By utilizing a transformation from amorphous calcium phosphate to hydroxyapatite, FGF-2 was effectively incorporated into polycrystals of hydroxyapatite.SEM photograph of a mixture of hydroxyapatite and FGF-2.     

Multinuclear cobalt–salen complexes with phenylene linker for epoxide polymerizations

Di‐ and trinuclear cobalt (Co)–salen complexes with a benzene ring as a rigid linker were explored for epoxide polymerizations. The dinuclear Co–salen complex with a 1,2‐phenylene linker showed higher catalytic activity than the dinuclear Co–salen complex with a 1,3‐phenylene linker and the trinuclear Co–salen complex with a 1,3,5‐benzenetriyl linker for the copolymerization of propylene oxide (PO) with carbon dioxide. A combination of the absolute configuration of the two Co–salen moieties was found to affect its catalytic activity. The optimized dinuclear Co–salen complex with a heterochiral combination demonstrated highest activity and maintained its catalytic activity under a low catalyst concentration. The heterochiral dinuclear Co–salen complex also showed high activity for the copolymerization of PO with cyclic anhydride. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2150–2159     

A Germylene Stabilized by Homoconjugation

The synthesis of a bicyclic germylene from the reaction of a germole dianion with hafnocene dichloride is reported. This germylene is stabilized by a homoconjugative interaction of the dicoordinated germanium atom with a remote C=C double bond. First reactivity studies revealed its nucleophilic character and resulted in the synthesis of bimetallic hafnium/iron and hafnium/tungsten complexes with a germylene group linker.     

Monolithic Silica Columns for HPLC,Micro‐HPLC,and CEC

Two types of monolithic silica columns derivatized to form an ODS phase, one prepared in a fused silica capillary (SR‐FS) and the other prepared in a mold and clad with an engineering plastic (poly‐ether‐ether‐ketone) (SR‐PEEK), were evaluated. The column efficiency and pressure drop were compared with those of a column packed with 5‐μm ODS‐silica particles and of an ODS‐silica monolith prepared in a mold and wrapped with PTFE tubing (SR‐PTFE). SR‐FS gave a lower pressure drop than a column packed with 5‐μm particles by a factor of 20, and a plate height of 20 μm at a linear velocity below 1 mm/s. SR‐PEEK showed higher flow‐resistance than the other monolithic silica columns, but they still showed a minimum plate height of 8–10 μm and a lower pressure drop than popular commercial columns packed with 5‐μm particles. The evaluation of SR‐FS columns in a CEC mode showed much higher efficiency than in a pressure‐driven mode.