TiO<Subscript>2</Subscript>/TiO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>N<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> nanocomposite and its acetaldehyde photodecomposition ability

Nitrogen-doped titania was coupled with the commercial titania nanoparticles by mechanical milling in liquid medium. The as-prepared nanocomposites (TiO₂/TiO_2−x N _y ) were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) specific surface area, UV–Vis spectroscopy, chemiluminescence, and acetaldehyde decomposition activity techniques. When a small amount of nitrogen-doped titania was added into the commercial titania, higher intensity and longer lifetime of ¹O₂ was observed, and the photocatalytic activity was efficiently improved. The TiO_2−x N _y acts as the acceptor of photoinduced holes. The recombination of the electron-hole was effectively depressed by the heterogeneous electron transfer. This could be an effective way to obtain highly active photocatalysts.     

Cycling performance of LiNi<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>Mn<Subscript>2 − <Emphasis Type="Italic">y</Emphasis></Subscript>O<Subscript>4</Subscript> prepared by the solid-state reaction

In order to improve the cycling performance of LiMn₂O₄, a part of Mn in LiMn₂O₄ was replaced by Ni. LiNi _y Mn_{2 − y} O₄ (y = 0.02, 0.05, 0.10, 0.15, and 0.20) were synthesized by preheating a mixture of LiOH, MnO₂ (CMD), and NiO at 400°C for 10 h and then calcining at 850°C for 48 h in air with intermediate grinding. The voltage vs. discharge capacity curves at a current density of 300 μA/cm² between 3.5 and 4.3 V showed two plateaus, but the plateaus became unclear as the value of y increased. The sample with y = 0.02 had the largest first discharge capacity of 118.1 mA h/g. The LiNi_0.10Mn_1.90O₄ sample had a relatively large first discharge capacity of 95.0 mA h/g and snowed an excellent cycling performance.     

Obtaining nanostructured films of PbSe<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>S<Subscript>1–<Emphasis Type="Italic">y</Emphasis></Subscript> solid solutions by chemical deposition

We propose a technique for wet-chemical codeposition of lead sulfide and selenide using thiourea and selenourea to form films of PbSe _y S_1–y substitutional solid solutions. The synthesized nanocrystalline layers with NaCl (B1) structure simultaneously contain both PbS-based and PbSe-based PbSe _y S_1–y solid solutions (0 < y < 0.9).     

Investigation of the α-BiO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>F<Subscript>3 − 2<Emphasis Type="Italic">y</Emphasis></Subscript>-based tysonite-type solid solutions by X-ray diffraction and impedance spectroscopy

Tysonite solid solutions Bi_{1 ? x} M _x (O, F)_{3 ? d} (M = Na, Sr, or Nd) based on α-BiO _y F_{3 ? 2y} were prepared by solid-state synthesis at 873 K with subsequent quenching to ice-cold water. Aliovalent substitutions in both the cation and anion sublattices (M ⁿ⁺ → Bi³⁺ and O^2? → F^?) made it possible to vary the anion-vacancy density. The solid solutions were characterized by X-ray diffraction and impedance spectroscopy. The homogeneity regions for the tysonite solid solution were determined; triangulation schemes at 873 K were suggested for the systems BiF₃-BiOF-NaBiF₄ and BiF₃-BiOF-SrF₂, and a scheme of the subsolidus phase diagram for the system BiO_0.1F_2.8-NdF₃ was suggested. In the system BiO_0.1F_2.8-NdF₃, the transition temperature from the low-symmetry tysonite phase (phase II, space group P \(\overline 3 \) c1, Z = 6) to the high-symmetry one (phase I, space group P6₃/mmc, Z = 2) decreases with increasing anion-vacancy density. Conductivity measurements were performed in the temperature range 300–523 K and the frequency range from 5 to 1 × 10⁶ Hz. The conductivity of samples in the system BiO_0.1F_2.8-NdF₃ increases with increasing bismuth-ion and anion-vacancy concentrations.     

Electronic peltier effect in Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cu<Subscript>(2 − <Emphasis Type="Italic">x</Emphasis>) − δ</Subscript>S

Temperature dependences of the Peltier coefficient are studied in the temperature range of 300–700 K under variation of the composition of the Li _x Cu_{(2 − x) − δ}S samples. The obtained values of the Peltier coefficient of the Li_0.05Cu_{1.95 − δ}S samples with a different copper content are within the range of 0.1–0.4 J/A, which is somewhat higher than the similar parameters of bismuth telluride, the basic material of semiconductor coolers.     

High-temperature ion transport in La<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3−δ</Subscript>

The conductivity of the entire solid solution La_1–xSr_xFeO_3–, where x=0.2, 0.4, 0.5, 0.7 and 0.9, in the oxygen partial pressure range 10^–19 to 0.5 atm and temperatures between 750 and 950 °C is reported. The analysis of the isothermal pressure dependences of the conductivity reveal that the lanthanum-strontium ferrites can be characterized as mixed ion-electron conductors in the low-oxygen pressure/high-oxygen deficiency limit. The partial contribution to conductivity from oxygen ions increases with strontium content and attains a maximal value at x=0.5. Further increase in doping results in the development of oxygen vacancy ordering phenomena and deterioration of the conducting properties.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Fast evaluation of molecular auxiliary functions <Emphasis Type="Italic">A</Emphasis><Subscript>α</Subscript> and <Emphasis Type="Italic">B</Emphasis><Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> by analytical relations

Analytical relations through the initial values are derived for the molecular auxiliary functions A _α (x) and B _n (x), where α =n+ɛ, 0⩽ ɛ < 1 and n=0,1,2,.... These relations are useful in the fast calculation of multicenter molecular integrals over integer and noninteger n Slater type orbitals. It is shown that the formulas obtained are numerically stable for all values of n,ɛ and x.PACS No: 31.15.+q, 31.20.EjAMS subject classification: 81-V55, 81-V45     

Potassium-conducting solid electrolytes in K<Subscript>1 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>GaO<Subscript>2</Subscript> system

New solid electrolytes with a high conductivity by K⁺ ions in the K_{1 − 2x} Sr _x GaO₂ system are synthesized and studied. It is found that the introduction of Sr²⁺ ions into potassium monogallate leads to the formation of solid solutions with KGaO₂ structure in a wide range of additive concentration. These solid solutions exhibit a high conductivity; the conductivity increases monotonically with increasing concentration of strontium within the single-phase range. The electrical characteristics are related to the electrolyte structure. The results are compared with the earlier data for the gallate solid electrolytes with the additives of four-charged cations and the systems based on potassium monoferrite and monoaluminate.     

<Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> Diagram of MgO–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System: Microstructure Design

A computer model of the T–x–y diagram of MgO–SiO₂–Al₂O₃ system is used to show the possibility of analysis of its microstructure constitution in terms of competition between primary and eutectic crystals by means of vertical mass balance diagrams calculated for a given centroid over the whole temperature range. The usefulness of horizontal mass balance diagrams is considered for studying phase relations at a fixed temperature along the chosen isopleth. Mass balances were used to determine the crystallization path at the quasi-peritectic liquidus point with the invariant reaction L + Al₂O₃ = 3Al₂O₃ · 2SiO₂ + MgO · Al₂O₃, whose composition was taken into account in giving a rationale to corundum armor element technology.     

Density-Functional Theory of Vibrations in Ni<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>V<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Clusters

We have performed the calculation of the vibrational frequencies, Fermi energy and binding energy for several clusters of Ni and vanadium atoms by using the first principles. The calculations are performed by using the density-functional theory in the local-density approximation with spin polarized orbitals. The calculation of vibrational frequencies shows that some of the clusters have positive vibrational frequencies which describe the oscillations of the stable clusters. The negative vibrational frequencies indicate that these clusters are instable with respect to these vibrations when no energy of this frequency is supplied. We find that for vanadium concentration less than 11.1% the clusters of Ni and V atoms are not stable. Hence ferromagnetism in Ni is predicted below 11.1% vanadium. We find the vibrational frequencies of several clusters for which the vanadium concentration is more than 11.1%. We are able to find a phase transition by use of quantum mechanics alone without the use of classical mechanical variables or thermodynamic variables such as temperature.     

Ionic conduction of Li<Subscript>8 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Mg<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>ZrO<Subscript>6</Subscript> solid solutions

A boundary of existence of solid solutions in the Li_8−2x Mg _x ZrO₆ system is found to be 7 mol % MgO. The transport properties of Li_{8 − 2x} Mg _x ZrO₆ solid solutions (the electronic component of total conductivity, the temperature and concentration dependences of conductivity and activation energy) are studied. It is supposed that, for Li₈ZrO₆ phase and solid solution based on it, an abrupt change of conductivity in the temperature range from 663 to 713 K is caused by the transition of electrolyte into the superionic state.     

Thermal analysis of the Ce<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Tb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> pigments

Compounds based on CeO₂ were synthesized as high-temperature environment-friendly inorganic pigments with interesting hues. The pigments have been synthesized by using the solid state reaction in the temperature range from 1,300 to 1,600 °C. The host lattice of these pigments is CeO₂ that is doped by terbium ions. The incorporation of doped ions provides interesting orange colours after application into ceramic glaze. The goal was to develop conditions for the synthesis of these compounds and to determine the influence of calcination temperature on their colouring effects. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. The pigments were also evaluated from the standpoint of their structure and particle sizes.     

Potassium–conducting K<Subscript>1 − 2<Emphasis Type="Italic">x</Emphasis></Subscript>Pb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>GaO<Subscript>2</Subscript> solid electrolytes

Solid electrolytes with potassium-cation conductivity in the K_{1 − 2x} Pb _x GaO₂ system were synthesized and studied. It was found that solid solutions based on potassium monogallate are formed in a wide range of compositions. They contain vacancies in the potassium sublattice that provide for high conductivity of electrolytes. The relationship is considered between electric characteristics of solid electrolytes and the composition and structure of solid solutions. The results are compared to the earlier obtained data for similar solid electrolytes based on potassium monoaluminate and monoferrite.     

Synthesis of (Ni<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)<Subscript>2</Subscript>P (0 ≤ <Emphasis Type="Italic">x</Emphasis> ≤ 0.65) substitution solid solution

The phosphides (Ni_{1 ? x} Co _x )₂P (0 ≤ x ≤ 0.65) crystallizing in the hexagonal system, space group P \(\bar 6\)2m, were synthesized in two steps starting from the continuous solid solution (Ni_{1 ? x} Co _x )₃(PO₄)₂ · 8H₂O. The initial phosphates were first completely dehydrated at 800°C and then reduced with hydrogen at 900–1000°C for 1–2 h.     

Planar Four-Coordinate Carbon in Star-Like Perlithioannulenes C<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>Li<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 3–6)

The structure and stability of perlithioannulenes C _n Li _n (n = 3–6) were examined ab initio [MP2(full)/6-311+G**] and in terms of the density functional theory (B3LYP/6-311+G**). The systems with n = 3, 5, and 6 may be stabilized as planar star-like structures with bridging lithium atoms and hypercoordinate carbon atoms. Star-like structures are the most stable isomers of odd-numbered annulenes (n = 3, 5), while the most stable isomers of even-numbered annulenes (n = 4, 6) have less symmetric nonplanar structures.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Transport and thermal characteristics of Cs<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Rb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>H<Subscript>2</Subscript>PO<Subscript>4</Subscript>

The transport and thermal properties of Cs_{1 − x} Rb _x H₂PO₄ in a wide range of compositions were studied. The binary salts Cs_{1 − x} Rb _x H₂PO₄ (x = 0–0.9) contain solid solutions with a structure of CsH₂PO₄. The binary salts were synthesized by mechanically mixing the starting components and growing crystals by isothermal evaporation from aqueous solutions. The properties of Cs_{1 − x} Rb _x H₂PO₄ salts obtained by different procedures were found to differ considerably. At higher rubidium contents in compounds obtained by mechanical mixing, the superionic transition temperature rose insignificantly, the high-temperature phase conductivity decreased twofold, the low-temperature conductivity increased within the limits of the order of magnitude, and the system of hydrogen bonds was slightly weakened. In Cs_{1 − x} Rb _x H₂PO₄ crystals grown from solutions, the temperature of the superionic transition decreased along with its slowing down, and the low-temperature conductivity increased by more than three orders of magnitude because of the higher contents of residual acid aqueous centers in the structure of the salt. These systems are characterized by increased thermal stability.     

Phenyl(trimethylsiloxy)fluorosiloxanes PhSi(OSiMe<Subscript>3</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>F<Subscript>3−<Emphasis Type="Italic">n</Emphasis></Subscript>

The siloxane bond splitting reaction in hexamethyldisiloxanes PhSiCl _n F_3?n was studied.     

Gas-phase structures of 1-adamantylphosphines,PH<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>(1-Ad)<Subscript>3−<Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 1–3)

The gas-phase structure of 1-adamantylphosphine has been determined by electron diffraction, supplemented with data from ab initio and DFT calculations. The adamantyl fragment was modeled with local C _3v symmetry and the phosphino group was found to be in a position almost bisecting a mirror plane of the adamantyl group, giving the molecule overall approximate C _s symmetry. There is a small displacement of the C–P bond from the local threefold axis of the adamantyl group. Geometry optimizations were also performed for bis-(1-adamantyl)phosphine (C ₁ point-group symmetry) and tris-(1-adamantyl)phosphine (C ₃ symmetry), demonstrating extremely crowded environments around the phosphorus atoms leading to adamantyl groups that were much less symmetric. The adamantyl groups were also found to twist by a significant amount to minimize the strain.