分段函数的分类及分离型分段函数与初等函数之间的关系

将分段函数划分为连结型分段函数 ,分离型分段函数和它们的组合形式三种类型 ,得到了分离型分段函数是初等函数的充分必要条件 ,完整地解决了分离型分段函数与初等函数之间的关系 ,并且给出了初等函数在其任一截取集上的限制函数 (截取函数 )仍然是初等函数的结果     

一种改进的Heaviside函数与Dirac函数的C-V图像分割研究

C-V模型中Heaviside函数和Dirac函数正则化逼近影响对目标图像的分割,根据Heaviside函数和Dirac函数的性质,提出了新的正则化Heaviside函数和Dirac函数.首先分析了C-V模型中正则化的Heaviside函数和Dirac函数在图像分割中所起的作用,在此基础上提出了新的正则化的Heaviside函数和Dirac函数,改进了C-V模型.实验结果表明,运用正则化的Heaviside函数和Dirac函数的图像分割效果较好.     

一道大学生数学竞赛题的联想

通过对一个正弦函数不等式的类比,给出了余弦函数、正切函数、双曲正弦函数、双曲余弦函数、反正弦函数、反双曲正弦函数的不等式.     

A-函数关于Weyl函数m的反表示

考虑Simon反谱理论新方法中引入的A-函数,根据Weyl函数m关于A-函数的表示关系,利用广义函数和Fourier变换的方法求出A-函数关于Weyl函数m的反表示,该结论表明A-函数的本质是广义函数.     

例谈函数定义域对研究函数性质的影响

函数是高中阶段的重点内容．函数的定义域、解析式和值域统称为函数的三要素,其中定义域和解析式决定了函数的值域．许多同学在学习函数时总是比较重视函数的解析式,忽略函数的定义域,从而造成很多错解．实际上,函数的定义域改变了,函数也就改变了,它是函数不可忽视的重要组成部分,下面举例说明．     

强一般型代数体函数分担小函数的唯一性（英文）

代数体函数的唯一性理论是值分布论中的重要研究课题.由于代数体函数的多值性,代数体函数的唯一性的研究成果没有亚纯函数那么丰富.亚纯函数分担小函数的唯一性问题已经被彻底解决,代数体函数分担小函数的唯一性问题还值得深入研究.研究了强一般型代数体函数分担小函数的唯一性问题,得到几个唯一性定理,所得结果将亚纯函数分担小函数唯一性定理推广到强一般型代数体函数.     

极大值函数的一类光滑逼近函数的性质研究

针对极大值函数的一类光滑逼近——凝聚函数,对其作进一步研究.指出凝聚函数的一阶导数对光滑参数取极限时恰好得到极大值函数的一个次梯度,从而凝聚函数不仅可以一致逼近极大值函数,而且该函数富含极大值函数的一阶信息,可很好的刻画极大值函数的一阶特征.进一步,对光滑逼近函数的光滑参数做简单分析,得到的结果揭示了光滑参数的变动对凝聚函数的影响.并分别以正值函数及绝对值函数为例,对所得到的结果给出几何说明.     

解抽象函数问题的三大策略

函数是中学数学的重点内容,而抽象函数问题又是函数内容的难点之一.抽象函数是指没有给出具体的函数解析式或图像,但给出了函数满足的一部分性质或运算法则.由于此类函数问题     

解抽象函数问题的三大策略

函数是中学数学的重点内容,而抽象函数问题又是函数内容的难点之一．抽象函数是指没有给出具体的函数解析式或图像,但给出了函数满足的一部分性质或运算法则．由于此类函数问题既能全面地考查学生对函数概念的理解及性质的代数推理和论证能力     

特别推荐

《新课程函数问题研究》函数是高考的重点、热点,函数思想是教学思想方法中最为闪亮的一朵奇葩.《新课程函数问题研究》结合新课程标准,以高中数学中涉及到的函数问题为主线,对函数的定义域与值域、函数的性质及应用、函数中的数学思想方法探究、二次函数的重要作用、三角函数问题研究、高考中的分段函数、抽象函数专题     

Clustering Methods in Microarrays

Summary DCT Given a finite set of points in an Euclidean space the \emph{spanning tree} is a tree of minimal length having the given points as vertices. The length of the tree is the sum of the distances of all connected point pairs of the tree. The clustering tree with a given length of a given finite set of points is the spanning tree of an appropriately chosen other set of points approximating the given set of points with minimal sum of square distances among all spanning trees with the given length. DCM A matrix of real numbers is said to be column monotone orderable if there exists an ordering of columns of the matrix such that all rows of the matrix become monotone after ordering. The {\emph{monotone sum of squares of a matrix}} is the minimum of sum of squares of differences of the elements of the matrix and a column monotone orderable matrix where the minimum is taken on the set of all column monotone orderable matrices. Decomposition clusters of monotone orderings of a matrix is a clustering ofthe rows of the matrix into given number of clusters such that thesum of monotone sum of squares of the matrices formed by the rowsof the same cluster is minimal.DCP A matrix of real numbers is said to be column partitionable if there exists a partition of the columns such that the elements belonging to the same subset of the partition are equal in each row. Given a partition of the columns of a matrix the partition sum of squares of the matrix is the minimum of the sum of square of differences of the elements of the matrix and a column partitionable matrix where the minimum is taken on the set of all column partitionable matrices. Decomposition of the rows of a matrix into clusters of partitions is the minimization of the corresponding partition sum of squares given the number of clusters and the sizes of the subsets of the partitions.     

Noncommutative geometry and motives: The thermodynamics of endomotives

We combine aspects of the theory of motives in algebraic geometry with noncommutative geometry and the classification of factors to obtain a cohomological interpretation of the spectral realization of zeros of L-functions. The analogue in characteristic zero of the action of the Frobenius on ?-adic cohomology is the action of the scaling group on the cyclic homology of the cokernel (in a suitable category of motives) of a restriction map of noncommutative spaces. The latter is obtained through the thermodynamics of the quantum statistical system associated to an endomotive (a noncommutative generalization of Artin motives). Semigroups of endomorphisms of algebraic varieties give rise canonically to such endomotives, with an action of the absolute Galois group. The semigroup of endomorphisms of the multiplicative group yields the Bost-Connes system, from which one obtains, through the above procedure, the desired cohomological interpretation of the zeros of the Riemann zeta function. In the last section we also give a Lefschetz formula for the archimedean local L-factors of arithmetic varieties.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Peridynamics via finite element analysis

Peridynamics is a recently developed theory of solid mechanics that replaces the partial differential equations of the classical continuum theory with integral equations. Since the integral equations remain valid in the presence of discontinuities such as cracks, the method has the potential to model fracture and damage with great generality and without the complications of mathematical singularities that plague conventional continuum approaches. Although a discretized form of the peridynamic integral equations has been implemented in a meshless code called EMU, the objective of the present paper is to describe how the peridynamic model can also be implemented in a conventional finite element analysis (FEA) code using truss elements. Since FEA is arguably the most widely used tool for structural analysis, this implementation may hasten the verification of peridynamics and significantly broaden the range of problems that the practicing analyst might attempt. Also, the present work demonstrates that different subregions of a model can be solved with either the classical partial differential equations or the peridynamic equations in the same calculation thus combining the efficiency of FEA with the generality of peridynamics. Several example problems show the equivalency of the FEA and the meshless peridynamic approach as well as demonstrate the utility and robustness of the method for problems involving fracture, damage and penetration.     

Analysis of the Stress State of the Surface Layer of a Polymeric Mass upon Filling of Bulky Compression Molds

The stress state of the surface layer of a polymeric mass during filling of bulky compression molds is analyzed. It is shown that, at particular rheological characteristics of the mass, temperature, and filling rates, cracking of the surface layer occurs, which leads to defects in the finished products. A physical analysis of this process makes it possible to conclude that the cracks arise due to the normal stresses operating in the front region of the moving polymeric mass. It is found that, under certain flow conditions, areas with a pressure lower than the atmospheric one appear on the surface of the polymer. If the tensile stresses arising in these local regions are higher than the tensile strength of the mass, the continuity of the composition is broken in the direction determined by the greatest rate of the normal deformation. To confirm the reliability of the crack-formation mechanism proposed, the distribution of the pressure and normal stresses over the free surface is calculated based on a numerical method. These calculations show that, by comparing the stress level achieved in the front region with the tensile-strength characteristics of the polymeric composition, it is possible to predict, with a sufficient accuracy, the possibility of crack formation in the surface layer of such a mass under given flow conditions and thus to solve the question on flawless manufacturing of products.     

基于综合重要度的动车组多部件系统机会维修策略研究

针对我国动车组列车现行维修方式,提出基于综合重要度序列的动车组多部件系统机会维修策略,对提高系统可靠度贡献大的关键部件进行准时优先维修。建立部件综合重要度指数计算模型,并依据其对部件维修优先级进行排序。以维修总成本最低为目标计算单部件最优维修周期及时刻,以系统维修总成本最低为目标,以关键部件的维修时刻为系统停机时刻建立考虑重要度的多部件系统机会维修模型。算例选取某型动车组四级修时更换的四部件系统为研究对象,讨论机会维修里程窗的大小及其偏移量对维修效果的影响,对比结果表明,考虑综合重要度的机会维修策略能够在维修费用基本持平的条件下,保证对系统可靠性贡献大的关键部件的可靠性,进而保证系统的整体可靠性。     

The Dirichlet divisor problem,traces and determinants for complex powers of the twisted bi-Laplacian

Estimating the counting function for the eigenvalues of the twisted bi-Laplacian leads to the Dirichlet divisor problem, which is then used to compute the trace of the heat semigroup and the Dixmier trace of the inverse of the twisted bi-Laplacian. The zeta function regularizations of the traces and determinants of complex powers of the twisted bi-Laplacian are computed. A formula for the zeta function regularizations of determinants of heat semigroups of complex powers of the twisted bi-Laplacian is given.     

城市老旧居住小区交通环境评价指标与评价方法

定量的评判城市老旧居住小区整体交通环境质量并进而科学有效的提出老旧小区交通环境更新与改善措施,对城市老旧居住小区交通环境进行了调查,明确了老旧居住小区存在的突出交通问题,并提出了城市老旧居住小区交通环境评价的指标体系,包括行人跨路出行指数、无人行道路段长度占比、停车泊位供需比、路内非法停车占比、平均停车步行距离、泊位数量户数比、人均步行空间、无障碍通道、盲道设置比例、非机动车泊位供需比、地面停放车辆数小区面积比、外部穿行交通周转量小区面积比等。并给出了具体指标的计算方法与获得办法。以长沙市四个典型老旧居住小区为例,对评价方法进行了论证,并得到城市老旧居住小区存在的一般问题,包括人车混杂、人车交织现象严重,停车泊位短缺、车辆乱停乱放,交通设施、特别是弱势群体交通设施缺乏。给出的评价指标、评价方法与结论可为城市老旧小区改造更新,特别是其中很重要的交通环境更新提供决策依据。     

Utilization and maintenance in a model with scrapping

We consider a productive asset, called equipment or capital good, and we examine the properties of, as well as the interactions between, the operating policies, which are determined by its optimal utilization and maintenance, and the capital policy of scrapping, which defines the optimal time when the productive asset is retired from its current use. Starting with an abstract model and using the approach of optimal control, initially we characterize the various types of equipment by assigning to them a single total profit index, which indicates how the above policies affect the flow of operating revenues plus capital gains or losses. This index is a function of market-determined prices. So using it we then investigate how the operating and capital policies are influenced by the rate of discount, the price of new equipment, and the rise or fall of the price of new equipment relative to the value of its output. Among other interesting results, we find that the effects of these prices on the nature and interactions of optimal policies depend crucially on whether the equipment is of the usual profit making type, where output is the main source of revenue, or of the antique type, where the main source of revenue is capital gains.     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.