二茂铁取代的笼型八聚(二甲基硅氧基)倍半硅氧烷的合成与表征

在Karstedt催化剂的催化作用下,通过把合成的笼型八聚(二甲基硅氧基)倍半硅氧烷与乙烯基二茂铁进行氧化硅烷化反应,合成了二茂铁取代的笼型八聚(二甲基硅氧基)倍半硅氧烷,产物经红外光谱、核磁共振氢谱与硅谱等进行了表征.     

Janus异官能基笼型倍半硅氧烷的合成研究

设计合成确切结构的异官能基笼型倍半硅氧烷一直是国际性的研究热点问题.用"自下而上"的方法,以半笼型结构倍半硅氧烷为模板,成功地制备出具有Janus结构的四乙烯基四氨基苯基、四乙烯基四苯基异官能基笼型倍半硅氧烷.并且,产物在一些极性溶剂(如四氢呋喃、氯仿及二甲基亚砜)中有较好的溶解性,为其衍生化及应用提供了保证.对所制备的异官能基笼型倍半硅氧烷进行了全面的表征分析,证明其具有Janus异官结构特征及完整的笼型结构.紫外可见及荧光发射光谱证实了倍半硅氧烷笼型结构的电子携带及传输作用,反过来证明其具有完整的笼型结构,同时也为其在有机光电材料中应用提供可能.提供了一类通用合成方法,拓宽了倍半硅氧烷功能单体的种类,并拓展了其应用范围.     

六聚笼型倍半硅氧烷的合成及解离研究

采用环己基三氯硅烷为反应物,乙腈为溶剂,通过水解反应合成出纯净的环己基六聚笼型倍半硅氧烷T6(化合物1),通过FT-IR、29SiNMR、XRD、MS对其结构、分子量、晶型等进行了全面的表征。并成功将其解离为四硅醇物质(化合物2),为合成封闭双官能化的八聚笼型倍半硅氧烷奠定了基础。     

八苯基笼型倍半硅氧烷的官能化及其在高分子纳米复合材料中的应用

笼型倍半硅氧烷（POSS）是具有独特分子结构的有机硅化合物,无机硅氧骨架核心为其提供良好的硬度和热稳定性,外围有机基团可增强与聚合物基体间的相容性,以它为前驱体可以制备分子级分散的有机／无机纳米高分子杂化材料。近年来,全芳香结构的八苯基笼型倍半硅氧烷因其高的耐热性和官能化方法的多样性尤其得到关注。本文重点综述了八苯基笼...     

双环笼状取代倍半硅氧烷的合成与表征

以双环笼状含磷四配位硅为前驱体, 四甲基氢氧化铵为催化剂反应得到具有高度对称结构的双环笼状磷酸酯取代倍半硅氧烷, 通过红外光谱, ²⁹Si固体核磁共振谱, 质谱和X衍射光谱等手段确定了产物的结构和晶型. 热分析结果表明, 添加5%集磷硅为一体的倍半硅氧烷, 能使环氧树脂的分解温度提高45 ℃, 700 ℃时成炭量达到12.2%.     

多面体笼型倍半硅氧烷纳米杂化低介电材料的研究

多面体笼型倍半硅氧烷( POSS)是由O-Si-O链接的纳米大小的笼型无机芯[(SiO1.5)n]和外围有机取代基团（活性或惰性）组成,这种独特的结构为杂化功能材料的制备提供了重要的平台与基础。本文从低介电材料结构对性能的影响,以及低介电性能的形成机理,综述了当前低介电材料制备方法,尤其是多面体笼型倍半硅氧烷( POSS)在低介电材料控制制备的研究进展,为该领域新材料设计提供借鉴。     

笼型倍半硅氧烷形态分析及对杂化材料相容性和机械性能的影响

采用水解缩合方法制备了八乙烯基笼型倍半硅氧烷(OVPOSS), 并将其引入到聚甲基丙烯酸甲酯(PMMA)自凝树脂中, 得到有机-无机杂化材料. 通过傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、差示扫描量热仪(DSC)、塑料球压痕硬度计、高温高速摩擦磨损测试仪和悬臂梁冲击实验等对其形貌和性能进行了研究. 结果表明, OVPOSS以晶体状态存在于PMMA树脂中. 通过DSC热性能曲线、FOX方程和Gordon-Talyor方程曲线发现, 当POSS含量较高时, PMMA-POSS杂化体系能够发生相分离, 对杂化材料的机械性能有一定的影响.     

倍半硅氧烷改性环氧树脂的研究进展

倍半硅氧烷是近年发展起来的一种分子水平的有机无机杂化材料。文章介绍了倍半硅氧烷的结构、合成以及笼型倍半硅氧烷（POSS）基高分子复合材料的结构及合成方法。倍半硅氧烷改性聚合物可以提高聚合物的热性能、阻燃性能和物理机械性能等。文章综述了倍半硅氧烷改性环氧树脂的研究进展。     

基于倍半硅氧烷的有机-无机杂化材料研究

有机-无机杂化材料兼具有机材料和无机材料的优点,是继单组份材料、复合材料和梯度材料之后的新一代功能材料。基于可以通过分子设计与剪裁的倍半硅氧烷(笼型倍半硅氧烷和无规倍半硅氧烷)无机前驱体,利用多种方法如反应性共混法、溶胶-凝胶法、光固化、原子转移自由基聚合、自组装技术等制备一系列高性能聚合物/倍半硅氧烷有机-无机纳米杂化材料。     

自由基引发八甲基丙烯酸酯基笼型倍半硅氧烷在多壁碳纳米管表面的可控包覆

以FeSO4/K2S2O8为反应的引发剂,通过均相和非均相聚合体系,制备了聚八甲基丙烯酸酯基笼型倍半硅氧烷(PMMA-POSS)包覆的多壁碳纳米管核-壳型纳米杂化材料.透射电子显微镜显示,在均相体系中可以得到包覆均匀且厚度可调的多壁碳纳米管杂化材料,包覆厚度在15~25 nm,35~50 nm之间,非均相体系中得到了PMMA-POSS微球悬挂在碳纳米管侧壁的杂化材料.通过傅里叶红外光谱(FTIR)、拉曼光谱(Raman)以及热重分析(TGA)对杂化材料进行了表征,并给出了可能的包覆机理.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.