Reflection–absorption IR and surface-enhanced IR spectroscopy of tetracarboethoxy t-butyl-calix[4]arene,as a host molecule with potential applications in sensor devices

A vibrational study of the calix[4]arene derivative 25,26,27,28-tetracarboethoxy-p-tert-butylcalix[4]arene (TCEC) is accomplished in this work. This characterization implies a study of its adsorption on metal (Cu and Ag) films by reflection–absorption IR spectroscopy (RAIRS) and surface-enhanced IR (SEIR) in transmission and reflection–absorption configurations. Metal surfaces for SEIR were obtained by a simple direct immobilization on Ge of Ag nanoparticles suspended in water. The goal of this research was an accurate vibrational characterization of the above calixarene molecule, paying special attention in the structural marker bands of ester groups, which play an important role in the molecular adsorption on such metals. The information derived from this study will serve to better understand the interaction of ester-functionalised calixarenes with these metals, in order to prepare sensor films with selective affinity towards polycyclic aromatic hydrocarbons (PAHs). The application of these surface techniques confirmed the importance of the ester groups in the immobilization and self-assembly of these host molecules to the metal surface and provided information about the orientation adopted by TCEC on the metal.     

Functionalization of Ag nanoparticles with dithiocarbamate calix[4]arene as an effective supramolecular host for the surface-enhanced Raman scattering detection of polycyclic aromatic hydrocarbons

We report the use of 25,27-diethyl-dithiocarbamic-26,28-dihydroxy-p-tert-butylcalix[4]arene in the functionalization of Ag nanoparticles for pyrene detection by surface-enhanced Raman scattering (SERS). SERS spectra provided information about the calixarene orientation on the metal surface and the interaction mechanism with pyrene. Thus, in this work, we have combined a powerful spectroscopy technique such as SERS, the electronic plasmon-based properties of nanostructured metals, the molecular size-selective recognition of calixarene, and the strong chelating properties of the dithiocarbamate group toward the metal surface in the detection of polycyclic aromatic hydrocarbons.     

Surface-enhanced Raman scattering and density functional theory calculation of uracil on gold and silver nanoparticle surfaces

The adsorption structure of uracil on gold and silver nanoparticle surfaces has been comparatively studied by means of surface-enhanced Raman scattering (SERS). Uracil appeared to assume a perpendicular orientation with respect to the surfaces. The presence of the nu(CH) band in the SERS spectra indicated a vertical orientation of the aromatic ring of uracil on Au and Ag. The density functional theory (DFT) calculation was performed at the levels of B3LYP and MP2 to estimate the energetic stability of the N3- and N1-deprotonated tautomers and their vibrational frequencies on the surfaces. Almost all the vibrational bands in the SERS spectra at high concentrations could be ascribed to the N3-deprotonated uracil. The N3-deprotonated tautomer was predicted to be more favorable on Au than on Ag from the DFT calculation. The metal-N bond distance was assumed to be shorter for Au than for Ag upon adsorption of uracil.     

Surfaces designed for charge reversal

We have created surfaces which switch from cationic at pH < 3 to anionic at pH > 5, by attaching aminodicarboxylic acid units to silica and gold substrates. Charge reversal was demonstrated by monitoring the adsorption of cationic dyes (methylene blue and a tetracationic porphyrin) and an anionic sulfonated porphyrin, at a range of pH using UV-vis absorption and reflection spectroscopy. The cationic dyes bind under neutral conditions (pH 5-7) and are released at pH 1-4, whereas the anionic dye binds under acidic conditions (pH 1-4) and is released at pH 5-7. Gold surfaces were functionalized with two different amphoteric disulfides with short (CH(2))(2) and long (CH(2))(10)CONH(CH(2))(6) linkers; the longer disulfide gave surfaces exhibiting charge reversal in a narrower pH range. Adsorption is much faster on the functionalized gold (t(1/2) = 62 s) than on functionalized silica (t(1/2) = 6900 s), but the final extents of coverage on both surface are similar, for a given dye at a given pH, with maximal coverages of around 2 molecules nm(-)(2). These charge-reversal processes are reversible and can be repeatedly cycled by changing the pH. We have also created surfaces which undergo irreversible proton-triggered charge switching, using a carbamate-linked thiol carboxylic acid which cleaves in acid. These surfaces are versatile new tools for controlling electrostatic self-assembly at surfaces.     

基于氢键作用的杯芳烃超分子识别乙醇的传感机理及分析应用

采用4种杯芳烃衍生物为吸附涂膜材料, 考察了涂膜石英晶体微天平(QCM)传感器对环境大气中微量乙醇气体的识别性能, 发现C-乙基杯[4]连苯三酚芳烃(3)是识别乙醇气体最有效的活性涂膜材料. 制备了C-乙基杯[4]连苯三酚芳烃·2CH₃CH₂OH(5)单晶体并进行X射线衍射结构解析, 发现其识别机制是基于超分子主体3与客体乙醇分子之间形成的C-H…π, O-H…π及O-H…O氢键作用. 当涂膜质量为24.70 μg 时, 涂膜QCM传感器对乙醇的响应最灵敏, 达到10.53 Hz/(mg·L^-1). 分析了乙醇气体的吸附和解吸附动力学过程, 得到传感器对乙醇气体吸附和解吸附的初速度分别为-0.04600 Hz/s和0.03896 Hz/s. 该方法响应快, 具有选择性、 可逆性、 重现性和稳定性好的优点, 对乙醇样品测定的回收率为94.8% ~105.2%, 与气相色谱法的测定结果一致, 表明该方法可用于生活环境中乙醇气体的检测.     

Surface enhanced vibrational spectra of thymine

Surface-enhanced vibrational spectroscopy (SEVS) is discussed using 5-methyluracil (thymine) as a model compound. Surface-enhanced Raman scattering (SERS) and surface-enhanced infrared (SEIR) are reported and a characterization of thymine adsorbed onto silver island films is provided. The thymine SERS spectra obtained using silver colloids, silver roughened electrodes and silver island films are remarkably different due to several binding possibilities of thymine during chemical adsorption onto a silver surface. It is shown that laser induced photo dissociation may lead to further changes in the recorded spectra of the adsorbate. The surface enhanced-infrared (SEIR) spectra of thymine on silver island are reported here for the first time. The infrared spectra of thymine films were also been obtained to help the assignment of molecular vibrations in the surface enhanced spectra.     

Surface-enhanced Raman scattering of a series of n-hydroxybenzoic acids (n = P, M and O) on the silver nano-particles

Surface-enhanced Raman scattering (SERS) spectra of a series of n-hydroxybenzoic acids (n-HBA, n = P, M and O) adsorbed on the silver nano-particles were studied, respectively, in the silver colloidal solution and on the dried silver-coated filter paper. On the same substrate, the different molecules' SERS spectra were different, while on the different substrates the same molecules' SERS spectra were also different. Significant changes were found in the SERS spectra of PHBA molecules adsorbed on the two substrates, and the changes found in MHBA's spectra on two substrates were next to PHBA's, while almost no changes were found in the spectra of OHBA molecules. Moreover, it was found, on the filter paper, that the SERS spectra of the same molecules would change with the coverage density of the silver nano-particles. The analyses showed that the origins of these changes were the different adsorption behavior of molecules adsorbed on the silver nano-particles. Because in these three molecules the relative positions of the carboxyls and hydroxyls on the benzenes are different, the adsorption behaviors of these three molecules adsorbed on the silver surfaces are also different. The experimental results suggest that the surface characteristic of the substrate and the surface configuration of the adsorbate could exert a great influence on the adsorption behavior of the adsorbates on the substrates.     

Functionalized carbosilane dendritic species as soluble supports in organic synthesis

A new methodology, which is compatible with the use of reactive organometallic reagents, has been developed for the use of carbosilane dendrimers as soluble supports in organic synthesis. Hydroxy-functionalized dendritic carbosilanes Si[CH2CH2CH2SiMe2(C6H4CH(R)OH)]4 (G0-OH, R = H or (S)-Me) and Si[CH2CH2CH2Si[CH2CH2CH2SiMe2(C6H4CH(R)OH)]3]4 (G1-OH, R = H or (S)-Me) were prepared and subsequently converted into the esters Si[CH2CH2CH2SiMe2(C6H4CH(R)OC(O)CH2Ph)]4 (R = H or (S)-Me) and Si[CH2CH2CH2Si[CH2CH2CH2SiMe2(C6H4CH(R)OC(O)CH2C6H4 R')]3]4 (R = H and R' = H or R = (S)-Me and R' = H or R = H and R' = Br). As an example the latter compound was functionalized under Suzuki conditions. The functionalized carboxylic acid was obtained in high yield after cleavage from the dendritic support. Moreover, the ester functionalized dendrimers were converted to the corresponding zinc enolates followed by a condensation reaction with an imine to a beta-lactam in excellent yield and purity. Furthermore, it was demonstrated that a small combinatorial library of beta-lactams could be prepared starting from a carbosilane dendrimer functionalized with different ester moieties. These results show that carbosilane dendrimers can be applied as soluble substrate carriers for the generation of low molecular weight organic molecules. In combination with nanofiltration techniques, separation and recycling of the dendrimers can be realized.     

Surface functionalized titanium thin films: zeta-potential, protein adsorption and cell proliferation

The relationship between electric charge at a material surface and protein adsorption is essential to understand the mechanism of biological integration of materials with tissues. This study investigated the influence of titanium thin films' surface chemistry and surface electric charge (zeta-potential) properties on protein adsorption and cell proliferation. Titanium thin films were surface functionalized with different functional end groups, such as -CH=CH2, -NH2 and -COOH groups in order to produce surfaces with a variety of electric charge properties. The chemical compositions, electric charges and wettability were investigated by using X-ray photoelectron spectroscopy (XPS), zeta-potential measurements and water contact angle measurements, respectively. XPS revealed the surface functionalization of titanium films with -CH=CH2, -NH2, and -COOH groups, which were converted from -CH=CH2 groups. Ti-COOH samples showed the lowest water contact angles and zeta-potential compared to all other samples investigated in this study. NH2-terminated titanium films displayed intermediate contact angles of 70.3+/-2.5 degrees . Fibrinogen adsorption on titanium films and surface functionalized titanium films were investigated in this study. Ti-COOH samples displayed a lower protein adsorption than all other groups, such as NH2-, -CH=CH2-terminated titanium thin films. A tendency that the lower zeta-potential of the samples, the lower the protein adsorption at their surfaces was observed. In vitro cell proliferation tests were also performed on the different surface functionalized titanium films. NH2-terminated titanium films displayed good cell proliferation and cell viability tendency. However, a lower cell proliferation on COOH-terminated titanium films was observed compared with NH2-terminated titanium films. This effect was attributed to the difference in protein adsorption of these samples.     

Detection of polycyclic aromatic hydrocarbon (PAH) compounds in artificial sea-water using surface-enhanced Raman scattering (SERS)

This paper reports an accurate synthesis of surface-enhanced Raman scattering (SERS) active substrates, based on gold colloidal monolayer, suitable for in situ environmental analysis. Quartz substrates were functionalized by silanization with (3-mercaptopropyl)trimethoxysilane (MPMS) or (3-aminopropyl)trimethoxysilane (APTMS) and they subsequently reacted with colloidal suspension of gold metal nanoparticles: respectively, the functional groups SH and NH₂ bound gold nanoparticles. Gold nanoparticles were prepared by the chemical reduction of HAuCl₄ using sodium tricitrate and immobilized onto silanized quartz substrates. Active substrate surface morphology was characterized with scanning electron microscopy (SEM) measurements and gold nanoparticles presented a diameter in the range 40-100 nm. Colloidal hydrophobic films, allowing nonpolar molecule pre-concentration, were obtained. The surfaces exhibit strong enhancement of Raman scattering from molecules adsorbed on the films. Spectra were recorded for two PAHs, naphthalene and pyrene, in artificial sea-water (ASW) with limits of detection (LODs) of 10 ppb for both on MPMS silanized substrates.     

C70分子吸附于铜表面的增强拉曼光谱研究

报道了C70分子吸附于铜表面的增强拉曼光谱.通过与正常拉曼光谱以及银表面SERS谱的比较发现,C70分子与铜表面之间的吸附属于物理吸附,增强机制主要是电磁增强.C70分子在银表面上的吸附状态与铜表面上的不同,这导致了两者特征峰谱线强度分布存在差异.以C60的振动模式为参考,推断出C70分子在2种金属表面上的吸附状态可能分别处于使碳笼的挤压振动模接近于“平躺”和“竖直”的2种状态.     

The surface chelate effect

The presence of a surface chelate effect is established in the model system of Cu2+ adsorption on a self-assembled monolayer of 16-mercaptohexadecanoic acid (MHA) on Au. The formation constant of Cu2+ with the MHA surface was found to be 119 +/- 3.2 times greater than that of Cu2+ with succinic acid (HOOC-(CH2)2-COOH), and 213 +/- 4.0 times greater than that of Cu2+ with glutaric acid (HOOC-(CH2)3-COOH) in aqueous solutions. Both of these molecules are known to chelate to metal ions forming seven- and eight-membered rings. The greater surface chelate effect is attributed to the presence of the two-dimensional array of ligands on the surface. We believe the surface chelate effect demonstrated here is of general significance to adsorption on molecular surfaces and should depend strongly on chemical functionality and monolayer structure.     

Catalytic applications of keto-stabilised phosphorus ylides based on a macrocyclic scaffold: calixarenes with one or two pendant Ni(P,O)-subunits as ethylene oligomerisation and polymerisation catalysts

Four calix[4]arenes containing either one or two ylidic -C(O)CH=PPh3 moieties anchored at p-phenolic carbon atoms were prepared starting from cone-25,27-dipropoxycalix[4]arene (1): 1,3-alternate-5,17-bis(2-triphenylphosphoranylideneacetyl)-25,26,27,28-tetrapropoxycalix[4]arene (12), 1,3-alternate-5-(2-triphenylphosphoranylideneacetyl)-25,26,27,28-tetrapropoxycalix[4]arene (13), cone-5-(2-triphenylphosphoranylideneacetyl)-25,27-dihydroxy-26,28-dipropoxycalix[4]arene (14), cone-5,17-bis(2-triphenylphosphoranylideneacetyl)-25,27-dihydroxy-26,28-dipropoxycalix[4]arene (15). All the ylides were shown to be suitable for the preparation of SHOP-type complexes, i.e. of molecules containing [NiPh{Ph2PCH=C(O)R}(PPh3)] subunits (R = calixarene fragment). The monometallic complexes, namely those obtained from the monophosphorus ylides 13 and 14, proved to be efficient ethylene oligomerisation or polymerisation catalysts. At 80 degrees C, they displayed significantly better activities than the prototype [NiPh{Ph(2)PCH=C(O)Ph}(PPh3)], hence reflecting the beneficial role of the bulky calixarene substituent. The systems derived from the two ylides 12 and 15, both containing two convergent ylidic moieties, resulted in lower activities, the proximity of the two catalytic centres facilitating an intramolecular deactivation pathway during the period of catalyst activation. For the first time, the solid-state structure of a complex containing two "NiPh(P,O)(PPh3)" units as well as that of a SHOP-type complex having two linked phosphorus units were determined.     

Surface-enhanced Raman scattering of 4,4′-bipyridine on gold nanoparticle surfaces

The adsorption structure and mechanism of 4,4′-bipyridine (BiPy) on gold nanoparticle surfaces has been investigated by means of surface-enhanced Raman scattering (SERS). The aromatic ring of BiPy appeared to assume a perpendicular orientation with respect to the gold surface from the presence of the ν(CH) band at ∼3060 cm⁻¹. The SERS intensities of several vibrational modes of BiPy on Au were found to vary as the bulk concentration. The SERS intensities for BiPy on Au could be ascribed to both the electromagnetic (EM) and charge transfer (CT) enhancement mechanism.     

Adsorption energy, growth mode, and sticking probability of Ca on poly(methyl methacrylate) surfaces with and without electron damage

The adsorption of Ca atoms on pristine and electron-irradiated poly(methyl methacrylate) (PMMA) surfaces at 300 K has been studied by adsorption microcalorimetry, atomic beam/surface scattering, and low-energy He+ ion scattering spectroscopy (ISS). On pristine PMMA, the initial sticking probability of Ca is 0.5, increasing quickly with Ca coverage. Below 0.5 ML, the heat of adsorption is 730-780 kJ/mol, much higher than Ca's sublimation energy (178 kJ/mol). The Ca here is invisible to ISS, which is attributed to Ca binding to ester groups below the CH3/CH2-terminated PMMA surface. The adsorption energy increases with coverage, suggesting attractions between neighboring Ca-ester complexes. Above 0.5 ML, Ca starts to grow as three-dimensional (3D) Ca clusters on top of the surface, which dominate growth after 2 ML. It is proposed that each Ca reacts with two esters to form the Ca carboxylate of PMMA, because this reaction's heat would be close to that observed. The total amount of Ca that binds to subsurface sites is estimated from the integral heat of adsorption to involve 4-6 layers of ester groups. Exposing the PMMA surface to electrons increases Ca's initial sticking probability but lowers its adsorption energy. This is attributed to electron-induced defects acting as nucleation sites for 3D Ca islands, whose growth now competes kinetically with Ca diffusing to subsurface esters. Consequently, only two layers of subsurface esters get populated at saturation. The heat eventually reaches Ca's bulk heat of sublimation on all PMMA surfaces, where pure, bulk-like Ca thin films form.     

The reaction of tetrakis(dimethylamido)titanium with self-assembled alkyltrichlorosilane monolayers possessing -OH, -NH2, and -CH3 terminal groups

The reactions of tetrakis(dimethylamido)titanium, Ti[N(CH(3))(2)](4), with alkyltrichlorosilane self-assembled monolayers (SAMs) terminated by -OH, -NH(2), and -CH(3) groups have been investigated with X-ray photoelectron spectroscopy (XPS). For comparison, a chemically oxidized Si surface, which serves as the starting point for formation of the SAMs, has also been investigated. In this work, we examined the kinetics of adsorption, the spatial extent, and stoichiometry of the reaction. Chemically oxidized Si has been found to be the most reactive surface examined here, followed by the -OH, -NH(2), and -CH(3) terminated SAMs, in that order. On all surfaces, the reaction of Ti[N(CH(3))(2)](4) was relatively facile, as evidenced by a rather weak dependence of the initial reaction probability on substrate temperature (T(s) = -50 to 110 degrees C), and adsorption could be described by first-order Langmuirian kinetics. The use of angle-resolved XPS demonstrated clearly that the anomalous reactivity of the -CH(3) terminated SAM could be attributed to reaction of Ti[N(CH(3))(2)](4) at the SAM/SiO(2) interface. Reaction on the -NH(2) terminated SAM proved to be the "cleanest", where essentially all of the reactivity could be associated with the terminal amine group. In this case, we found that approximately one Ti[N(CH(3))(2)](4) adsorbed per two SAM molecules. On all surfaces, there was significant loss of the N(CH(3))(2) ligand, particularly at high substrate temperatures, T(s) = 110 degrees C. These results show for the first time that it is possible to attach a transition metal coordination complex from the vapor phase to a surface with an appropriately functionalized self-assembled monolayer.     

Tuning the spin-transition properties of pyrene-decorated 2,6-bispyrazolylpyridine based Fe(II) complexes

Two 2,6-bispyrazolylpyridine ligands (bpp) were functionalized with pyrene moieties through linkers of different lengths. In the ligand 2,6-di(1H-pyrazol-1-yl)-4-(pyren-1-yl)pyridine (L1) the pyrene group is directly connected to the bpp moiety via a C-C single bond, while in the ligand 4-(2,6-di(1H-pyrazol-1-yl)pyridin-4-yl)benzyl-4-(pyren-1-yl)butanoate (L2) it is separated by a benzyl ester group involving a flexible butanoic chain. Subsequent complexation of Fe(II) salts revealed dramatic the influence of the nature of the pyrene substitution on the spin-transition behaviour of the resulting complexes. Thus, compound [Fe(L1)(2)](ClO(4))(2) (1) is blocked in its high spin state due to constraints caused by a strong intermolecular π-π stacking in its structure. On the other hand, the flexible chain of ligand L2 in compounds [Fe(L2)(2)](ClO(4))(2) (2) and [Fe(L2)(2)](BF(4))(2)·CH(3)CN·H(2)O (3) prevents structural constraints allowing for reversible spin transitions. Temperature-dependent studies of the photophysical properties of compound 3 do not reveal any obvious correlation between the fluorescence of the pyrene group and the spin state of the spin transition core.     

金与银电极表面甘氨酸分子吸附作用的SERS光谱研究

本文利用表面增强拉曼光谱(SERS)技术研究了甘氨酸在金与银基底表面的吸附作用特征。研究表明甘氨酸分子以COO-的不对称形式吸附于金电极表面,且NH2也是其可能的吸附位点;而在银电极表面,则主要是通过COO-的对称形式而吸附。在此基础上,进一步研究了电极电位与溶液酸碱性对吸附于粗糙化银电极表面甘氨酸分子吸附作用的影响。研究结果表明,甘氨酸分子中去质子化羧基的吸附作用受电位影响较小,而电位对-NH3+吸附作用的影响程度较大。另一方面,溶液pH值对银电极表面的甘氨酸分子吸附行为的影响也较为显著。随着溶液酸性减小羧基倾向于相对于电极表面平行吸附。这是由于随着溶液碱性增大氨基质子化程度的减小,有利于氨基在银电极表面吸附。这将改变分子的吸附构型使其更接近于电极表面。这些变化主要出现在pH值大于10的条件下。     

New mono- and tricyclopalladated dendritic systems with encapsulated catalytic sites

The preparation of a series of new macrocyclic carbodiazasilane molecules functionalized with the monoanionic [2,6-(CH2NMe2)2C6H3](-)[triple bond]N,C,N-pincer ligand has been accomplished. Palladation of these systems was possible through oxidative addition with [Pd(dba)2] affording exclusive formation of the meso diastereoisomer. The X-ray crystal structures of these novel ligands and of the palladium(II) complex 10 were determined and confirmed the stereochemistry of the organopalladium cage. Attachment of the para-OH functionalized carbodiazasilane macrocycle 16 to a central core led to the formation of the dendritic structure 18 which was palladated to afford the novel multimetallic dendritic system with encapsulated catalytic sites 1. This cyclopalladated carbosilane dendrimer (1) as well as the mononuclear organopalladium cage 10 can be conveniently converted into active Lewis acid catalysts for the aldol condensation reaction. The catalytic data showed higher reaction rates for the dendritic structure than for the corresponding mononuclear systems.     

Adsorption mechanisms of sulfathiazole on gold,silver and copper surfaces studied by SERS

Surface-enhanced Raman scattering (SERS) of sulfathiazole was studied in gold, silver and copper colloids as well as on a gold plate. SERS spectra of sulfathiazole in gold and silver colloids indicated chemisorption of molecules on the metal nanoparticles through the amide nitrogen, with the phenyl moiety orthogonally placed and the thiazole ring almost parallel positioned towards the metal surface. Although selectively enhanced phenyl bands pointed to a very similar position of the sulfathiazole molecules on the copper colloid, a chemical bonding was not implied. Unlike adsorption mechanisms and position of the molecules on the colloid metal surfaces, a sideway adsorption of sulfathiazole on the gold plate was proposed. Hereby, both, the amide nitrogen and the thiazole nitrogen were considered responsible for approaching of sulfathiazole to the gold enhancing surface.