任意载荷下波纹圆板大挠度弹性特征的级数解法

本文以正交异性板理论为基础,提出了一种波纹圆板非线性弯曲的Chebyshev级数解法,推导出具有中心平台的波纹圆板在任意轴对称载荷作用下的弹性特征方程.文中计算了几个典型的特例,数值结果表明,本文的方法对目前常用的方法有一定的改进和推广.     

Influence of boundary conditions and temperature of dissipative heating on active damping of forced axisymmetric resonant bending vibrations of circular viscoelastic plates by piezoelectric sensors and actuators

The problem of forced monoharmonic, axisymmetric, bending vibrations and dissipative heating of circular viscoelastic plates with piezoelectric sensors and actuators is considered. We describe the viscoelastic behavior of a passive (without the piezoeffect) and a piezoactive material according to the concept of complex modules depending on temperature. The nonlinear coupled problem of electrothermoviscoelasticity is solved by numerical methods. The influence of boundary conditions and temperature of dissipative heating on the active damping of forced resonant vibrations of circular viscoelastic plates using piezoelectric sensors and actuators is investigated.     

Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

On the optimal design of plates for a given deflection

The optimum design problem of an elastic plate for a given deflection is considered. The design variable is chosen to be the thickness of the plate. Using the principle of stationary mutual potential energy first introduced by Shield and Prager, a sufficient optimality condition (which makes the volume stationary) is derived for plates under bending caused by general loading conditions. As an example, the optimum profile of a simply supported circular plate under a given rotationally symmetric loading is obtained.     

Uncovering the finite difference model equivalent to Hencky bar-net model for axisymmetric bending of circular and annular plates

As there are a few finite difference models in the literature for axisymmetric bending of plates, only one of these models is equivalent to the Hencky bar-net model (HBM) that comprises a finite number of rigid circular arcs and straight radial segments joined by frictionless hinges with elastic rotational springs. This paper is concerned with uncovering the one finite difference model (FDM) that is equivalent to the HBM. Based on the energy formulation, the governing equation for HBM is derived and it will be used to identify the FDM that has the same discrete set of equations. By using this equivalency between the HBM and the identified FDM, the expressions of edge spring stiffnesses of HBM are derived for various boundary conditions. As illustrative examples, the HBM is used to solve the bending problems of circular plates under uniformly and linearly increasing distributed loads. The analytical solutions of HBM avoids the singularity problem faced in FDM at the plate center. This paper also presents some benchmark bending solutions for annular plates with and without an internal ring support for different boundary restraints by using the HBM.     

非均匀弹性地基圆板轴对称弯曲的一般解

本文在阶梯折算法的基础上,提出一个新的方法——精确解析法,得到了非均匀弹性地基圆板弯曲的一般解.文中导出了在任意轴对称载荷和边界条件下求解非均匀弹性地基圆板和中心带孔圆板弯曲的一般公式,并给出一致收敛于精确解的证明.文中得到的一般解可直接计算无弹性地基圆板的弯曲问题.问题最后归结为求解一个二元一次代数方程.文末给出算例,算例表明无论内力和位移均可得到满意的结果.     

Solution of boundary-value problems of plates by the Vekua method for approximations <Emphasis Type="Italic">N</Emphasis> = 1 and <Emphasis Type="Italic">N</Emphasis> = 2

In this paper, the problem of bending for an isotropic plate with constant thickness 2h is considered. Problems of bending for infinite plates with a circular hole in which a rigid body is placed in the cases of approximations N = 1 and N = 2 of the Vekua theory are solved. We consider the case where the body is soldered. Problems of bending of circular rings are also solved. The results obtained are compared to the corresponding results obtained by plane classical bending theory. Translated from Sovremennaya Matematika i Ee Prilozheniya (Contemporary Mathematics and Its Applications), Vol. 51, Differential Equations and Their Applications, 2008.     

圆薄板非对称大变形弯曲问题

本文首先导出圆薄板非轴对称大变形问题的位移基本方程及边界条件.利用变换和摄动法将非线性位移方程线性化,得到了近似边值问题.作为算例,文中研究了圆薄板在较复杂载荷作用下的非线性弯曲问题.     

厚板在集中荷载作用下的弯曲

本文根据[1]中提出的简化理论,利用两变元的δ-函数的性质[2]和级数解法,处理了在集中荷载作用下两对边简支,另两对边为任意的矩形厚板的弯曲问题.考虑了横向剪力对于弯曲变形的影响.当板的厚度h很小时,忽略公式中所有h2以上的项,则所得的结果与薄板弯曲问题的相应解一致[3].在本文的最后,我们还得到了在任意线分布荷载作用下相应问题的解.     

几种典型板考虑初始荷载效应的基频近似解

基于两组板考虑初始荷载效应的动力控制微分方程:一般形式的动力控制微分方程和极坐标形式的动力控制微分方程,运用Galerkin（伽辽金)法求解得到了简支矩形板、固支矩形板、简支等边三角形板、固支椭圆形板、简支圆形板和固支圆形板6种典型板考虑初始荷载效应的自由振动基频（第一阶频率）近似解．通过与相关文献提出的有限元法计算结果对比,验证了公式的正确性．基频近似解表达式简单明了,物理意义明确,清楚地说明了初始荷载及相关因素对板自由振动基频的影响,直观地说明了板的初始荷载效应这一概念．计算分析表明:初始荷载的存在增加了板的弯曲刚度,提高了板的自振频率．这种初始荷载效应对频率的影响主要受初始荷载大小、跨厚比及边界条件等因素的影响．在计算分析和设计中应考虑并重视这种初始荷载效应对板计算分析带来的影响.     

夹层圆板的非线性弯曲

本文导出了具有软夹心的夹层圆板的非线性轴对称弯曲理论的基本方程和边界条件,并给出了表板很薄情况下的这些方程和边界条件的简化形式.作为算例,研究了在均布横向载荷作用下具有滑动固定边界条件的夹层圆板,使用修正迭代法,得到了相当精确的解析解.     

Large amplitude vibration of heated corrugated circular plates with shallow sinusoidal corrugations

This paper presents a nonlinear free vibration analysis of corrugated circular plates with shallow sinusoidal corrugations under uniformly static ambient temperature. Based on the nonlinear bending theory of thin shallow shells, the governing equations for corrugated plates are established from Hamilton’s principle. These partial differential equations are reduced to corresponding ordinary ones by elimination of the time variable with Kantorovich method following an assumed harmonic time mode. The resulting equations, which form a nonlinear two-point boundary value problem in spatial variable, are then solved numerically by shooting method, and the temperature-dependent characteristic relations of frequency vs. amplitude for nonlinear vibration of heated corrugated plates are obtained successfully. The comparison with available published results shows that the numerical analysis here is of good reliability. A detailed parametric study is conducted involving the dependency of nonlinear frequency on the depth and density of corrugations along with the temperature change. Effects of these variables on the trend of nonlinearity are plotted and discussed.     

不用克希霍夫—拉夫假设的弹性圆板理论再探

本文在不用克希霍夫一拉夫假设的弹性板一般理论的基础上,建立了不用克希霍夫一拉夫假设的弹性圆板的一级近似理论,对圆板在四周固定和均布载荷的条件下,得到了具体的轴对称分析解,并和经典的圆薄板解进行了比较,证明本文新解更加接近实验结果,本文也具体地讨论了理论结果中厚度增大时的影响。     

复合荷载下波纹圆板的非线性分析*

本文按照各向同性和正交各向异性圆板的大挠度理论,研究了具有光滑中心的波纹圆板在均布和中心集中荷载联合作用下的非线性弯曲问题.应用修正迭代法,我们得到了夹紧固定和滑动固定两种边界条件下十分精确的解析解.     

变厚度圆薄板在集中荷载下的非线性问题

本文研究了厚度按线性规律变化的圆薄板在中心集中力作用下的非线性弯曲问题。     

圆形弹性薄板非轴对称大挠度问题的一个解法

本文建议一个求解圆形弹性薄板非轴对称大挠度问题的方法.本文以周边固定受非轴对称载荷作用下圆形薄板的大挠度问题为例阐述所述方法的原理和解题步骤.文中所述方法可以用以求解其他边界及载荷作用下圆形薄板的非轴对称大挠度问题.     

Thermoelastoplastic Bending of Complexly Reinforced Plates

A problem on the transverse-longitudinal bending of reinforced plates of variable thickness under a thermal-force loading is formulated. A qualitative analysis of the problem is carried out, and a way of its linearization is indicated. Calculations of isotropic and metal composite plates subjected to the transverse or transverse-longitudinal bending showed that their bearing capacity in the elastoplastic bending is a number of times (occasionally, by an order of magnitude) greater than in the elastic bending. The heating of the plates sharply decreases their resistance to the bending in the case of elasticity and affects it only slightly in the case of elastoplasticity. In the elastoplastic bending, the bearing capacity of the metal composite plate a number of times exceeds that of isotropic plates made of conventional structural metal alloys. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 715–742, November–December, 2005.     

用双向三角级数法解悬臂矩形薄板在均布荷载下的弯曲

悬臂矩形板的弯曲问题是平板理论中的一个难题.多年来,对于这种板只有能量法与数值解法的近似解.1979年以来清华大学张福范教授等用迭加法陆续得出悬臂矩形板在均布荷载和一些集中荷载作用下的解析解.对于在均布荷载作用下的悬臂矩形薄板,本文用双向三角级数法获得了其挠度函数的解析解,并将所得结果与迭加法所得的结果进行了比较.通过比较表明,两种方法计算的结果符合得十分好,因而相互印证了它们的正确性.     

Thermal deflection of an elastic circular plate of variable thickness

The elastic behaviour of a solid circular plate of variable thickness under stationary temperature distribution is studied. The Young’s modulus and Poisson’s ratio are, however, supposed to be constants. Thermal deflections and moments per unit length and also the bending stresses have been determined for both clamped and simply-supported plates.     

弹性基上锥壳一般弯曲问题的精确解

本文应用Donnell的简化假定,从弹性基上锥壳位移型微分方程组出发,通过引入一个位移函数U(s,θ)(在极限情况下就退化成V.S.Vlasov对于圆柱壳所引的位移函数[5]),将基本微分方程组化成为一个八阶可解偏微分方程.这个方程的一般解用级数形式给出.对于在实际中有广泛应用价值的Winkler弹性基上锥壳的轴对称弯曲问题,本文给出了详细的数值结果,并求出了边缘荷载作用下的影响系数,这对计算弹性基上锥壳组合结构有着重要的意义.