氟原子与反式1,3-丁二烯分子反应动力学的理论研究

Theoretical studies of F atom reaction with trans-1,3-butadiene were carried out at the CCSD(T)/6-311G(d,p)/B3LYP/6-311G(d,p) levels. Energies and structures for all reactants, products and transition states were determined. Two reaction pathways involving the formation of the complexes CH2CHCHFCH2 and CH2CHCHCH2F were found in this reaction. Theoretical results suggest that the H atom channel observed in previous crossed beam experiment occurs likely via these two long-lived complex formation pathways. For the complex CH2CHCHFCH2 pathway, another reaction channel (C2H3+C2H3F) is also accessible. Relative importance of the C2H3+C2H3F channel versus the H formation channel via the same reaction pathway has also been estimated, suggesting that it would be difficult to observe the C2H3+C2H3F channel in a crossed molecular beam experiment. Theoretical analysis also shows that the HF formation proceeds via direct abstraction mechanisms, though it is likely a minor process in this reaction.     

Atomic radical—molecule reactions F + CH<Subscript>3</Subscript>C≡CH: mechanistic study

The reaction of atomic radical F with propyne has been studied theoretically using ab initio quantum chemistry methods and transition state theory. The potential energy surface was calculated at the CCSD(T)/aug-cc-pVDZ (single-point) level using the UMP2/6-311++G(d,p) optimized structures. Two reaction mechanisms including the addition–isomerization–elimination reaction mechanism and the directed hydrogen abstraction reaction mechanism are considered. For the hydrogen abstraction reactions, i.e., the most probable evolution pathway in the title reaction, the HF formation occurs via direct abstraction mechanism dominantly and the H atom picked up by the atomic radical F should come mostly from the methyl group of normal propyne. On the other hand, for the addition–isomerization–elimination mechanism, the most feasible pathway should be the atomic radical F attacking on the C≡C triple bond in propyne (CH₃C≡CH) to form a weakly-bound adduct A1 with no barrier, followed by F addition to the C≡C triple bond to form the low-lying intermediate isomer 5. Subsequently, isomer 5 directly dissociates to P3 H₂CCCHF + H via transition state TS₅/P3. The other reaction pathways on the doublet PES are less competitive due to thermodynamical or kinetic factors. Furthermore, based on the analysis of the kinetics of all channels through which the addition and abstraction reaction proceed, we expect that the competitive power of reaction channels may vary with experimental conditions for the title reaction. The present work will provide useful information for understanding the processes of atomic radical F reaction with other unsaturated hydrocarbons. This material is available from author via E-mail.     

自由基-分子反应:F+Propene(CH2CHCH3)的从头算研究

The radical-molecule reaction F+propene (CH2CHCH3) was studied in detail by using the Becke's three parameter Lee-Yang-Parr-B3LYP/6-311G(d,p) and coupled cluster with single, double, and triple excitationsCCSD(T)/6-311+G(2d,2p). It is shown that F+propene reaction mainly occurs through complex-formation mechanism: F attacks the double bond of propene leading to the formation of complex 1 and complex 2. As the two radical complexes are metastable, they can quickly dissociate to H+C3H5F, CH3+C2H3F and HF+C3H5. Based on the ab initio calculations, the CH3+C2H3F is the main channel, and the H elimination and HF forming channels also provide some contribution to products. The calculated values are in good agreement with the recently reported experimental results.     

Ab initio and direct dynamics studies of the reaction of singlet methylene with acetylene and the lifetime of the cyclopropene complex

The energetics of the (1)CH(2) + C(2)H(2) --> H + C(3)H(3) reaction are accurately calculated using an extrapolated coupled-cluster/complete basis set (CBS) method based on the cc-pVDZ, cc-pVTZ, and cc-pVQZ basis sets. The reaction enthalpy (0 K) is predicted to be -20.33 kcal/mol. This reaction has no classical barrier in either the entrance or exit channel. However, there are several stable intermediates-cyclopropene (c-C(3)H(4)), allene (CH(2)CCH(2)), and propyne (CH(3)CCH)-along the minimum energy path. These intermediates with zero-point energy corrections lie below the reactants by 87.11 (c-C(3)H(4)), 109.69 (CH(2)CCH(2)), and 110.78 kcal/mol (CH(3)CCH). The vibrationally adiabatic ground-state (VAG) barrier height for c-C(3)H(4) isomerization to allene is obtained as 45.2 kcal/mol, and to propyne as 37.2 kcal/mol. In addition, the (1)CH(2) + C(2)H(2) reaction is investigated utilizing the dual-level "scaling all correlation" (SAC) ab initio method of Truhlar et al., i.e., the UCCSD(SAC)/cc-pVDZ theory. Results show that the reaction occurs via long-lived complexes. The lifetime of the cyclopropene intermediate is obtained as 3.2 +/- 0.4 ps. It is found that the intermediate propyne can be formed directly from reactants through the insertion of (1)CH(2) into a C-H bond of C(2)H(2). However, compared to the major mechanism in which the propyne is produced through a ring-opening of the cyclopropene complex, this reaction pathway is much less favorable. Finally, the theoretical thermal rate constant exhibits a negative temperature dependence, which is in excellent agreement with the previous results. The temperature dependence is consistent with the earlier RRKM results but weaker than the experimental observations at high temperatures.     

Insights into the unusual barrierless reaction between two closed shell molecules, (CH3)2S + F2, and its H2S + F2 analogue: role of recoupled pair bonding

Early flowtube studies showed that (CH(3))(2)S (DMS) reacted very rapidly with F(2); hydrogen sulfide (H(2)S), however, did not. Recent crossed molecular beam studies found no barrier to the reaction between DMS and F(2) to form CH(2)S(F)CH(3) + HF. At higher collision energies, a second product channel yielding (CH(3))(2)S-F + F was identified. Both reaction channels proceed through an intermediate with an unusual (CH(3))(2)S-F-F bond structure. Curiously, these experimental studies have found no evidence of direct F(2) addition to DMS, resulting in (CH(3))(2)SF(2), despite the fact that the isomer in which both fluorines occupy axial positions is the lowest energy product. We have characterized both reactions, H(2)S + F(2) and DMS + F(2), with high-level ab initio and generalized valence bond calculations. We found that recoupled pair bonding accounts for the structure and stability of the intermediates present in both reactions. Further, all sulfur products possess recoupled pair bonds with CH(2)S(F)CH(3) having an unusual recoupled pair bond dyad involving π bonding. In addition to explaining why DMS reacts readily with F(2) while H(2)S does not, we have studied the pathways for direct F(2) addition to both sulfide species and found that (for (CH(3))(2)S + F(2)) the CH(2)S(F)CH(3) + HF channel dominates the potential energy surface, effectively blocking access to F(2) addition. In the H(2)S + F(2) system, the energy of the transition state for formation of H(2)SF(2) lies very close to the H(2)SF + F asymptote, making the potential pathway a roaming atom mechanism.     

A crossed molecular beam study of the O(1D) + C(3)H(8) reaction: multiple reaction pathways.

The O((1)D) + C(3)H(8) reaction has been reinvestigated using the universal crossed molecular beam method. Three reaction channels, CH(3) + C(2)H(4)OH, C(2)H(5) + CH(2)OH, and OH + C(3)H(7), have been observed. All three channels are significant in the title reaction with the C(2)H(5) formation process to be the most important, while the CH(3) formation and the OH formation channels are about equal. Product kinetic energy distributions and angular distributions have been determined for the three reaction channels observed. The oxygen-containing radicals in the CH(3) and C(2)H(5) formation pathways show forward-backward symmetric angular distribution relative to the O atom beam, while the OH product shows a clearly forward angular distribution. These results indicate that the OH formation channel seems to exhibit different dynamics from the CH(3) and C(2)H(5) channels.     

Multiple channel dynamics in the O(1D) reaction with alkanes

In this article, we briefly review the recent experimental studies of the multiple channel dynamics of the O((1)D) reaction with alkane molecules using the significantly improved universal crossed molecular beam technique. In these reactions, the dominant reaction mechanism is found to be an O atom insertion into the C-H bond, while a direct abstraction mechanism is also present in the OH formation channel. While the reaction mechanism is similar for all of these reactions, the product channels are quite different because of the significantly different energetics of these reaction channels. In the O((1)D) reaction with methane, OH formation is the dominant process while H atom formation is also a significant process. In the O((1)D) reaction with ethane, however, the CH(3) + CH(2)OH is the most important process, OH formation is still significant and H atom formation is of minor importance. A new type of O atom insertion mechanism (insertion into a C-C bond) is also inferred from the O((1)D) reaction with cyclopropane. Through these comprehensive studies, complete dynamical pictures of many multiple channel chemical reactions could be obtained. Such detailed studies could provide a unique bridge between dynamics and kinetics research.     

Dynamics of the F atom reaction with propene

The F+C2H3CH3 reaction has been investigated using the crossed molecular beam technique. Three reaction channels have been observed in this reaction: H+C3H5F, CH3+C2H3F, and HF+C3H5. Time-of-flight spectra as well as product laboratory angular distributions have been measured for the HF, C2H3F, and C3H5F products from these three channels. Relative branching ratios of the three observed reaction channels have also been estimated. Experimental results indicate that these different channels exhibit significantly different reaction dynamics.     

Photodissociation and photoisomerization of alpha-fluorotoluene and 4-fluorotoluene in a molecular beam

The photodissociation of jet-cooled alpha-fluorotoluene and 4-fluorotoluene at 193 and 248 nm was studied using vacuum ultraviolet (vuv) photoionization/multimass ion imaging techniques as well as electron impact ionization/photofragment translational spectroscopy. Four dissociation channels were observed for alpha-fluorotoluene at both 193 and 248 nm, including two major channels C6H5CH2F-->C6H5CH2 (or C7H7)+F and C6H5CH2F-->C6H5CH (or C7H6)+HF and two minor channels C6H5CH2F-->C6H5CHF+H and C6H5CH2F-->C6H5+CH2F. The vuv wavelength dependence of the C7H7 fragment photoionization spectra indicates that at least part of the F atom elimination channel results from the isomerization of alpha-fluorotoluene to a seven-membered ring prior to dissociation. Dissociation channels of 4-fluorotoluene at 193 nm include two major channels C6H4FCH3-->C6H4FCH2+H and C6H4FCH3-->C6H4F+CH3 and two minor channels C6H4FCH3-->C6H5CH2 (or C7H7)+F and C6H4FCH3-->C6H5CH (or C7H6)+HF. The dissociation rates for alpha-fluorotoluene at 193 and 248 nm are 3.3 x 10(7) and 5.6 x 10(5) s(-1), respectively. The dissociation rate for 4-fluorotoluene at 193 nm is 1.0 x 10(6) s(-1). An ab initio calculation demonstrates that the barrier height for isomerization from alpha-fluorotoluene to a seven-membered ring isomer is much lower than that from 4-fluorotoluene to a seven-membered ring isomer. The experimental observed differences of dissociation rates and relative branching ratios between alpha-fluorotoluene and 4-fluorotoluene may be explained by the differences in the six-membered ring to seven-membered ring isomerization barrier heights, F atom elimination threshold, and HF elimination threshold between alpha-fluorotoluene and 4-fluorotoluene.     

H atom attack on propene

The reaction of propene (CH(3)CH═CH(2)) with hydrogen atoms has been investigated in a heated single-pulsed shock tube at temperatures between 902 and 1200 K and pressures of 1.5-3.4 bar. Stable products from H atom addition and H abstraction have been identified and quantified by gas chromatography/flame ionization/mass spectrometry. The reaction for the H addition channel involving methyl displacement from propene has been determined relative to methyl displacement from 1,3,5-trimethylbenzene (135TMB), leading to a reaction rate, k(H + propene) → H(2)C═CH(2) + CH(3)) = 4.8 × 10(13) exp(-2081/T) cm(3)/(mol s). The rate constant for the abstraction of the allylic hydrogen atom is determined to be k(H + propene → CH(2)CH═CH(2) + H(2)) = 6.4 × 10(13) exp(-4168/T) cm(3)/(mol s). The reaction of H + propene has also been directly studied relative to the reaction of H + propyne, and the relationship is found to be log[k(H + propyne → acetylene + CH(3))/k(H + propene → ethylene + CH(3))] = (-0.461 ± 0.041)(1000/T) + (0.44 ± 0.04). The results showed that the rate constant for the methyl displacement reaction with propene is a factor of 1.05 ± 0.1 larger than that for propyne near 1000 K. The present results are compared with relevant earlier data on related compounds.     

Ab initio study of the F + CH3NHNH2 reaction mechanism

The F + CH(3)NHNH(2) reaction mechanism is studied based on ab initio quantum chemistry methods as follows: the minimum energy paths (MEPs) are computed at the UMP2/6-311++G(d,p) level; the geometries, harmonic vibrational frequencies, and energies of all stationary points are predicted at the same level of theory; further, the energies of stationary points and the points along the MEPs are refined by UCCSD(T)/6-311++g(3df,2p). The ab initio study shows that, when the F atom approaches CH(3)NHNH(2), the heavy atoms, namely N and C atoms, are the favorable combining points. For the two N atoms, two prereaction complexes with C(s) symmetry are generated and there exists seven possible subsequent reaction routes, of which routes 1, 2, 5, and 7 are the main channels. Routes 1, 2, and 5 are associated with HF elimination, with H from the amino group or imido group, and route 7 involves the N-N bond break. Routes 3 and 6 with relation to HF elimination with H from methyl, and route 4 involved the C-N bond break, are all energetically disfavored. For the C atom, the attack of F results in the break of the C-N bond and the products are CH(3)F + NHNH(2). This route is very competitive.     

Reactions of methyl fluoride with atomic transition-metal and main-group cations: gas-phase room-temperature kinetics and periodicities in reactivity

Reactions of CH(3)F have been surveyed systematically at room temperature with 46 different atomic cations using an inductively coupled plasma/selected-ion flow tube tandem mass spectrometer. Rate coefficients and product distributions were measured for the reactions of fourth-period atomic ions from K(+) to Se(+), of fifth-period atomic ions from Rb(+) to Te(+) (excluding Tc(+)), and of sixth-period atomic ions from Cs(+) to Bi(+). Primary reaction channels were observed corresponding to F atom transfer, CH(3)F addition, HF elimination, and H(2) elimination. The early-transition-metal cations exhibit a much more active chemistry than the late-transition-metal cations, and there are periodic features in the chemical activity and reaction efficiency that maximize with Ti(+), As(+), Y(+), Hf(+), and Pt(+). F atom transfer appears to be thermodynamically controlled, although a periodic variation in efficiency is observed within the early-transition-metal cations which maximizes with Ti(+), Y(+), and Hf(+). Addition of CH(3)F was observed exclusively (>99%) with the late-fourth-period cations from Mn(+) to Ga(+), the fifth-period cations from Ru(+) to Te(+), and the sixth-period cations from Hg(+) to Bi(+) as well as Re(+). Periodic trends are observed in the effective bimolecular rate coefficient for CH(3)F addition, and these are consistent with expected trends in the electrostatic binding energies of the adduct ions and measured trends in the standard free energy of addition. HF elimination is the major reaction channel with As(+), while dehydrogenation dominates the reactions of W(+), Os(+), Ir(+), and Pt(+). Sequential F atom transfer is observed with the early-transition-metal cations, with the number of F atoms transferred increasing across the periodic table from two to four, maximizing at four for the group 5 cations Nb(+)(d(4)) and Ta(+)(d(3)s(1)), and stopping at two with V(+)(d(4)). Sequential CH(3)F addition was observed with many atomic cations and all of the metal mono- and multifluoride cations that were formed.     

A crossed molecular beam study on the dynamics of F atom reaction with SiH4

In this report, the dynamics of the F+SiH4 reaction has been studied using the universal crossed molecular beam method. Angular resolved time-of-flight spectra have been measured for all reaction products in a single set of experiments. Two different reaction channels have been observed: HF+SiH3 and SiH3F+H. Product angular distributions as well as energy distributions were determined for these two product channels. Experimental results show that the HF product is forward scattered relative to the F atom beam direction, while the SiH3F product is backward scattered relative the F atom beam direction, suggesting that two reaction channels proceed with distinctive reaction dynamics. The relative branching ratios of the two channels have also been estimated.     

氟原子与溴代甲烷反应化学发光研究

用光子计数技术系统地探测了F(^2P)原子与溴代甲烷等(CH~3Br、CH~2Br~2和CHBr~3)反应在各种压力下的可见区(300～900nm)化学发光,得到HF电子基态振动泛频跃迁及 Br~2(B)、BrF(B)、CHF(A)、CH(A) 等分子电子激发态跃迁的发射谱.求出HF(υ=3)转动温度为480K,计算机模拟光谱获得了Br~2(B)的振动布居.对比F与氯代甲烷反应的机理分析表明,初级反应主要是F提取形成HF,多级反应产生了电子激发态的产物分子.     

Pyrolysis mechanisms of thiophene and methylthiophene in asphaltenes

The pyrolysis mechanisms of thiophene in asphaltenes have been investigated theoretically using density functional and ab initio quantum chemical techniques. All of the possible reaction pathways were explored using B3LYP, MP2, and CBS-QB3 models. A comparison of the calculated heats of reaction with the available experimental values indicates that the CBS-QB3 level of theory is quantitatively reliable for calculating the energetic reaction paths of the title reactions. The pyrolysis process is initiated via four different types of hydrogen migrations. According to the reaction barrier heights, the dominant 1,2-H shift mechanism involves two competitive product channels, namely, C(2)H(2) + CH(2)CS and CS + CH(3)CCH. The minor channels include the formation of CS + CH(2)CCH(2), H(2)S + C(4)H(2), HCS + CH(2)CCH, CS + CH(2)CHCH, H + C(4)H(3)S, and HS + C(4)H(3). The methyl substitution effect was investigated with the pyrolysis of 2-methylthiophene and 3-methylthiophene. The energetics of such systems were very similar to that for unsubstituted thiophene, suggesting that thiophene alkylation may not play a significant role in the pyrolysis of asphaltene compounds.     

Bond-forming reactions of dications with molecules: a computational and experimental study of the mechanisms for the formation of HCF2+ from CF3(2+) and H2

The QCISD and QCISD(T) quantum chemical methods have been used to characterize the energetics of various possible mechanisms for the formation of HCF2+ from the bond-forming reaction of CF3(2+) with H2. The stationary points on four different pathways leading to the product combinations HCF2+ + H+ + F and HCF2+ + HF+ have been calculated. All four pathways begin with the formation of a collision complex [H2-CF3]2+, followed by an internal hydrogen atom migration to give HC(FH)F2(2+). In two of the mechanisms, immediate charge separation of HC(FH)F2(2+) via loss of either HF+ or a proton, followed by loss of an F atom, yields the experimentally observed bond-forming product HCF2+. For the other two mechanisms, internal hydrogen rearrangement of HC(FH)F2(2+) to give C(FH)2F(2+), followed by charge separation, yields the product CF2H+. This product can then overcome a 2.04 eV barrier to rearrange to the HCF2+ isomer, which is 1.80 eV more stable. All four calculated mechanisms are in agreement with the isotope effects and collision energy dependencies of the product ion cross sections that have been previously observed experimentally following collisions between CF3(2+) and H2/D2. We find that in this open-shell system, CCSD(T) and QCISD(T) T1-diagnostic values of up to 0.04 are acceptable. A series of angularly resolved crossed-beam scattering experiments on collisions of CF3(2+) with D2 have also been performed. These experiments show two distinct channels leading to the formation of DCF2+. One channel appears to correspond to the pathway leading to the ground state 1DCF2+ + D+ + F product asymptote and the other to the 3DCF2+ + D+ + F product asymptote, which is 5.76 eV higher in energy. The experimental kinetic energy releases for these channels, 7.55 and 1.55 eV respectively, have been determined from the velocities of the DCF2+ product ion and are in agreement with the reaction mechanisms calculated quantum chemically. We suggest that both of these observed experimental channels are governed by the reaction mechanism we calculate in which charge separation occurs first by loss of a proton, without further hydrogen atom rearrangement, followed by loss of an F atom to give the final products 1DCF2+ + D+ + F or 3DCF2+ + D+ + F.     

Methyl and methane elimination in the gas phase reaction of zirconium atom with 2-butyne: A DFT study

<正>The mechanisms for CH_3- and CH_4-elimination in the gas phase reaction of ground-state Zr with 2-butyne has been investigated in detail using B3LYP method.For the elimination of CH_3,two mechanisms which are similar to those previously found for the reactions of Y and Zr with propyne are identified.The mechanism for the elimination of CH_4 was revealed as:Zr + CH_3C≡CCH_3→π-complex→TS(H-migration)→HZr-(H_2CCC)-CH_3→TS(C-C insertion)→(H_2CCC)-HZr-CH_3→TS(H-migration)→CH_4+ ZrC_3H_2.     

C-C versus C-H bond activation of alkynes by early second-row transition metal atoms

The reactions of Y (a2D), Zr (a3F), Nb (a6D), Mo (a7S), and electronically excited-state Mo* (a5S) with propyne (methylacetylene) and 2-butyne (1,2-dimethylacetylene) were investigated using crossed molecular beams. For all of the metals studied, reactions with propyne led to H2 elimination, forming MC3H2. For Y + propyne, C-C bond cleavage forming YCCH + CH3 also was observed, with an energetic threshold in good agreement with an earlier determination of D0(Y-CCH). For Y + 2-butyne, three reactive channels were observed: YC4H4 + H2, YC3H3 + CH3, and YC3H2 + CH4. The C-C bond cleavage products accounted for 21 and 27% of the total products at Ecoll = 69 and 116 kJ/mol, respectively. For Zr and Nb reactions with 2-butyne, competition between H2 and CH4 elimination was observed, with C-C bond cleavage accounting for 12 and 4% of the total product signal at Ecoll = 71 kJ/mol, respectively. For reactions of Mo and Mo* with 2-butyne, only H2 elimination was observed. The similarity between reactions involving two isomeric species, propyne and allene, suggests that H atom migration is facile in these systems.     

Direct evidence for base-mediated decomposition of alkyl hydroperoxides (ROOH) in the gas phase

The reaction of F(-) with CH(3)OOH has been studied in the gas phase using a tandem flowing afterglow-selected ion flow tube apparatus. The reaction is rapid (k = 1.23 x 10(-9) cm(3) s(-1), 49% efficiency), and formation of HO(-) + CH(2)O + HF is the major reaction channel observed (85%). Isotopic labeling, reactions of F(-) with larger alkyl hydroperoxides, and computational studies demonstrate that the major product ion, HO(-), is formed via a concerted elimination mechanism that appears to be general to all alkyl hydroperoxides possessing an alpha-hydrogen. This mechanism represents a base-mediated decomposition of alkyl hydroperoxides in the gas phase that may have important implications for solution and biochemical reactions. The reverse reaction, CH(3)OO(-) + HF is also efficient (k = 2.43 x 10(-9) cm(3) s(-1)). The major product ensemble HO(-) + CH(2)O + HF (81%) is identical to that of the forward reaction, and represents a novel neutral-catalyzed decomposition of the anion.     

Computational study on fluorine atom reaction with silane molecule (SiH4)

The fluorine atom’s reaction with silane molecule (SiH₄) is investigated in this work. Two reaction channels which form SiH₃+HF and SiH₃F+H are discussed in the microscopic level. The analyses of transition states show that the SiH₃+HF channel proceeds through a direct hydrogen abstract mechanism and the SiH₃F+H channel could take place via the substitution mechanism. The energetic information of the potential energy surface has been obtained using high-level ab initio molecular orbital theory. A dual-level direct dynamics method is employed to calculate the rate constants of the title reaction. The rate constants of the hydrogen abstraction channel are much larger than the substitution channel. The calculated rate constants are in best agreement with available experimental result.