Zn adsorption on Pd(111): ZnO and PdZn alloy formation

The adsorption and thermal desorption of Zn and ZnO on Pd(111) was studied in the temperature range between 300 and 1300 K with TDS, LEED, and CO adsorption measurements. At temperatures below 400 K, multilayer growth of Zn metal on the Pd(111) surface takes place. At a coverage of 0.75 ML of Zn, a p(2 x 2)-3Zn LEED structure is observed. Increasing the coverage to 3 ML results in a (1 x 1) LEED pattern arising from an ordered Zn multilayer on Pd(111). Thermal desorption of the Zn multilayer state leads to two distinct Zn desorption peaks: a low-temperature desorption peak (400-650 K) arising from upper Zn layers and a second peak (800-1300 K) originating from the residual 1 ML Zn overlayer, which is more strongly bound to the Pd(111) surface and blocks CO adsorption completely. Above 650 K, this Zn adlayer diffuses into the subsurface region and the surface is depleted in Zn, as can be deduced from an increased amount of CO adsorption sites. Deposition of >3 ML of Zn at 750 K leads to the formation of a well-ordered Pd-Zn alloy exhibiting a (6 x 4 square root 3/3)rect. LEED structure. CO adsorption measurements on this surface alloy indicate a high Pd surface concentration and a strong reduction of the CO adsorption energy. Deposition of Zn at T > 373 K in 10(-6) mbar of O2 leads to the formation of an epitaxial (6 x 6) ZnO overlayer on Pd(111). Dissociative desorption of ZnO from this overlayer occurs quantitatively both with respect to Zn and O2 above 750 K, providing a reliable calibration for both ZnO, Zn, and oxygen coverage.     

Pressure-dependent Ni-O phase transitions and Ni oxide formation on Pt(111): an in situ STM study at elevated temperatures

Growth, atomic structure and O2 partial pressure dependent phase transitions of Ni-O structures and thin NiO films on Pt(111) have been studied using scanning tunnelling microscopy (STM), low-energy electron diffraction (LEED), and Auger electron spectroscopy (AES). In situ STM experiments were performed during film growth by reactive metal deposition at elevated temperatures (400-550 K) and variable O2 pressure. Depending on the substrate temperature, one-dimensional network-like Ni-O structures and islands with (7x1) and (4x2) reconstructions are formed during the initial stages of growth. These structures transform reversibly to a (2x2) reconstruction in a narrow O2 pressure range of 1.5-2x10(-6) mbar and can be monitored by in situ STM. Upon reduction of the O2 pressure to <10(-10) mbar pseudomorphic Ni monolayers are obtained. The defect-free ordering of Ni atoms on Pt(111) in a single stacking domain indicates an O-surfactant induced growth mode. The structural properties of the O2 pressure-dependent Ni-O phases are discussed in a simple model assuming NiO(001)-like atomic arrangements in the adsorbate overlayer. At higher coverage stable (111)-oriented NiO islands grow in a three-dimensional mode.     

Low energy electron diffraction and low energy electron microscopy microspot I/V analysis of the (4 x 4)O structure on Ag(111): surface oxide or reconstruction?

A low energy electron diffraction (LEED) I/V analysis was performed of the (4 x 4) oxygen structure on Ag(111). Two data sets were used, one recorded with a conventional LEED system and a second with a low energy electron microscope (LEEM). The data sets agree well with each other, demonstrating that I/V structure analyses can be performed with the same quality with LEEM as with conventional LEED. The structure obtained confirms the recently proposed model that involves a reconstruction of the Ag(111) surface. Previous models based on a thin layer of Ag(2)O that had been accepted for more than 30 years are disproved. The reconstruction model contains two units of six triangularly arranged Ag atoms and a stacking fault in one half of the unit cell. The six O atoms per unit cell occupy sites in the trenches between the Ag(6) triangles. Small lateral displacements of the Ag atoms lift the mirror symmetry of the structure, leading to two nonequivalent groups of O atoms. The atoms of both groups are located approximately 0.5 Angstrom below the top Ag layer, on fourfold positions with respect to the top layer Ag atoms. Ag-O distances between 2.05 and 2.3 Angstrom are found. The oxygen atoms exhibit large static or dynamic displacements of up to 0.3 Angstrom at 300 K.     

Kinetics of CO oxidation on high-concentration phases of atomic oxygen on Pt(111)

Temperature-programmed reaction spectroscopy (TPRS) and direct, isothermal reaction-rate measurements were employed to investigate the oxidation of CO on Pt(111) covered with high concentrations of atomic oxygen. The TPRS results show that oxygen atoms chemisorbed on Pt(111) at coverages just above 0.25 ML (monolayers) are reactive toward coadsorbed CO, producing CO(2) at about 295 K. The uptake of CO on Pt(111) is found to decrease with increasing oxygen coverage beyond 0.25 ML and becomes immeasurable at a surface temperature of 100 K when Pt(111) is partially covered with Pt oxide domains at oxygen coverages above 1.5 ML. The rate of CO oxidation measured as a function of CO beam exposure to the surface exhibits a nearly linear increase toward a maximum for initial oxygen coverages between 0.25 and 0.50 ML and constant surface temperatures between 300 and 500 K. At a fixed CO incident flux, the time required to reach the maximum reaction rate increases as the initial oxygen coverage is increased to 0.50 ML. A time lag prior to the reaction-rate maximum is also observed when Pt oxide domains are present on the surface, but the reaction rate increases more slowly with CO exposure and much longer time lags are observed, indicating that the oxide phase is less reactive toward CO than are chemisorbed oxygen atoms on Pt(111). On the partially oxidized surface, the CO exposure needed to reach the rate maximum increases significantly with increases in both the initial oxygen coverage and the surface temperature. A kinetic model is developed that reproduces the qualitative dependence of the CO oxidation rate on the atomic oxygen coverage and the surface temperature. The model assumes that CO chemisorption and reaction occur only on regions of the surface covered by chemisorbed oxygen atoms and describes the CO chemisorption probability as a decreasing function of the atomic oxygen coverage in the chemisorbed phase. The model also takes into account the migration of oxygen atoms from oxide domains to domains with chemisorbed oxygen atoms. According to the model, the reaction rate initially increases with the CO exposure because the rate of CO chemisorption is enhanced as the coverage of chemisorbed oxygen atoms decreases during reaction. Longer rate delays are predicted for the partially oxidized surface because oxygen migration from the oxide phase maintains high oxygen coverages in the coexisting chemisorbed oxygen phase that hinder CO chemisorption. It is shown that the time evolution of the CO oxidation rate is determined by the relative rates of CO chemisorption and oxygen migration, R(ad) and R(m), respectively, with an increase in the relative rate of oxygen migration acting to inhibit the reaction. We find that the time lag in the reaction rate increases nearly exponentially with the initial oxygen coverage [O](i) (tot) when [O](i) (tot) exceeds a critical value, which is defined as the coverage above which R(ad)R(m) is less than unity at fixed CO incident flux and surface temperature. These results demonstrate that the kinetics for CO oxidation on oxidized Pt(111) is governed by the sensitivity of CO binding and chemisorption on the atomic oxygen coverage and the distribution of surface oxygen phases.     

Formation of hydrogen-bridged cytosine dimers on Cu(110)

Cytosine was adsorbed onto a Cu(110) surface under UHV conditions. Annealing to 370 K resulted in the formation of a (6 x 6)gg low energy electron diffraction (LEED) pattern, even at submonolayer coverages. Examination of this structure with scanning tunneling microscopy (STM) revealed islands of zigzag chains at low coverages and large ordered domains at monolayer saturation. Further annealing to 480 K initiated a phase transition to a (6 x 2)gg structure observed both by LEED and STM. High resolution electron energy loss spectroscopy spectra for both overlayer structures exhibited mainly in-plane modes suggesting upright/tilted species on the surface. Based on the experimental data and supported by density functional theory calculations, a model is proposed for the (6 x 2)gg structure, which involves the formation of deprotonated hydrogen bridge-bonded cytosine dimers, adsorbed through the oxygen atoms.     

Epitaxial BaTiO3(100) films on Pt(100): a low-energy electron diffraction, scanning tunneling microscopy, and x-ray photoelectron spectroscopy study

The growth of epitaxial ultrathin BaTiO(3) films on a Pt(100) substrate has been studied by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and x-ray photoelectron spectroscopy (XPS). The films have been prepared by radio-frequency-assisted magnetron sputter deposition at room temperature and develop a long-range order upon annealing at 900 K in O(2). By adjusting the Ar and O(2) partial pressures of the sputter gas, the stoichiometry was tuned to match that of a BaTiO(3)(100) single crystal as determined by XPS. STM reveals the growth of continuous BaTiO(3) films with unit cell high islands on top. With LEED already for monolayer thicknesses, the formation of a BaTiO(3)(100)-(1 × 1) structure has been observed. Films of 2-3 unit cell thickness show a brilliant (1 × 1) LEED pattern for which an extended set of LEED I-V data has been acquired. At temperatures above 1050 K the BaTiO(3) thin film starts to decay by formation of vacancy islands. In addition (4 × 4) and (3 × 3) surface reconstructions develop upon prolonged heating.     

Surface chemistry on bimetallic alloy surfaces: adsorption of anions and oxidation of CO on Pt3Sn(111)

The microscopic structure of the Pt(3)Sn(111) surface in an electrochemical environment has been studied by a combination of ex situ low-energy electron diffraction (LEED), Auger electron spectroscopy (AES), and low-energy ion scattering (LEIS) and in situ surface X-ray scattering (SXS) and Fourier transform infrared (FTIR) spectroscopy. In ultrahigh vacuum (UHV) the clean-annealed surface produces a p(2 x 2) LEED pattern consistent with the surface composition, determined by LEIS, of 25 at. % Sn. SXS results show that the p(2 x 2) structure can be "transferred" from UHV into 0.5 M H(2)SO(4) and that the surface structure remains stable from 0.05 to 0.8 V. At 0.05 V the expansion of Pt surface atoms, ca. +2% from the bulk lattice spacing, is induced by adsorption of underpotential-deposited (UPD) hydrogen. At 0.5 V, where Pt atoms are covered by (bi)sulfate anions, the topmost layer is contracted relative to 0.05 V, although Sn atoms expand significantly, ca. 8.5%. The p(2 x 2) structure is stable even in solutions containing CO. In contrast to the Pt(111)-CO system, no ordered structures of CO are formed on the Pt(3)Sn(111) surface and the topmost layer expands relatively little (ca. 1.5%) from the bulk lattice spacing upon the adsorption of CO. The binding site geometry of CO on Pt(3)Sn(111) is determined by FTIR. In contrast to the near invariant band shape of a-top CO on Pt(111), changes in band morphology (splitting of the band) and vibrational properties (increase in the frequency mode) are clearly visible on the Pt(3)Sn(111) surface. To explain the line shape of the CO bands, we suggest that in addition to alloying effects other factors, such as intermolecular repulsion between coadsorbed CO and OH species, are controlling segregation of CO into cluster domains where the local CO coverage is different from the coverage expected for the CO-CO interaction on an unmodified Pt(111) surface.     

Kinetic Monte Carlo simulations of the interaction of oxygen with Pt(111)

The adsorption, dissociation, diffusion, and desorption of oxygen interacting with the Pt(111) surface have been studied using kinetic Monte Carlo simulations. This study has been motivated by uncertainties in the theoretical and the experimental derivations of O(2)Pt(111) reaction barriers. The simulations reproduce all known experimental data within basically one set of parameters, thus yielding microscopic insights into the elementary reaction steps occurring in the interaction of oxygen with Pt(111) and providing reliable estimates for adsorption energies and diffusion and desorption barriers. In particular, we confirm that the distance of oxygen atoms directly after dissociation is caused by ballistic hot atom motion rather than by diffusive motion. We address the equilibrium structure of oxygen atoms at high coverages. At low temperatures, chains of oxygen pairs are formed. We show that this mechanism can be explained by a lowered dissociation in the vicinity of already adsorbed atoms. Finally we discuss the role of the lateral interaction between the oxygen atoms in the oxygen desorption process.     

Oxygen adsorption on small PtNi nanoalloys

The adsorption of an oxygen molecule on nanoclusters of Pt and PtNi, in the size range between 13 and 55 atoms, has been studied using first-principle simulations. The structures have been obtained as a function of size and chemical composition of the clusters by means of the parallel excitable-walkers basin hopping method. O(2) preferentially adsorbs along the edge between two (111) facets due to a massive distortion of the Pt-Pt bond length. This bond elongation favours the adsorption in such a way that the binding energy of oxygen on a pure 55-atom cluster is still twice the value on the clean Pt(111). On the other hand, on 55-Pt(shell)Ni(core) nanoparticles, the O(2) binding energy is slightly lower than on Pt(111), because nickel core inhibits the stretching of the Pt-bond because of their size mismatch. However, as soon as its concentration is increased, Ni appears at the surface and its oxyphilic nature contributes to bind the oxygen molecule stronger.     

Structure and composition of the Pt(s) [6(111) × (111)] step-terrace surface vs. pH and potential in aqueous Br− solutions: Studies by LEED and Auger spectroscopy

Experiments were performed in which a well-characterized Pt(s) [6(111)×(111)] surface (consisting of terraces five atoms wide separated by steps of one atom height) was immersed into aqueous CaBr₂ solutions at controlled potential, after which the surface was removed from solution, evacuated and characterized by LEED and Auger spectroscopy. Adsorption of Br was strongest from acidic solutions, displaying a maximum of θ_Br = 0.5 (Br per surface Pt atom) near 0.2 V (vs. Ag/AgCl reference). At packing densities near the maximum, the Br layer displayed Pt(s) [6(111)×(111)](3×T) LEED patterns, which were relatively diffuse, indicating imperfect long-range order with a repeat distance of three PtPt distances parallel to the steps. Chemisorbed oxides or hydroxides were formed at relatively positive potentials. A streaked Pt(s) [6(111)×(111)] (9×NT) LEED pattern was found at potentials where oxidation led to similar Br and O/OH packing densities, indicating the presence of a seven-unit repeat distance parallel to the Pt steps and a variable multiple of the terrace width perpendicular to the steps. Retention of Ca²⁺ ions by the surface was potential dependent, with a minimum which coincided with the Br maximum, θ_Ca = 0.02. Water was retained by the surface due to interaction with Ca²⁺ to the extent of 5–15 water molecules per Ca²⁺ ion, depending upon the pH and potential. Comparison of these data with similar results for atomically smooth Pt (111) surfaces revealed that bromide was not selectively adsorbed at steps of the Pt surface.     

单层 FeO 薄膜表面周期性氧缺陷结构的形成

 采用扫描隧道显微镜和 X 射线光电子能谱对含有次表层 Fe 的 Pt 表皮结构 (Pt skin), 即 0.4 ML Fe 的 Pt/Fe/Pt(111) 表面, 在 1.1 × 10?7 kPa 氧气气氛退火过程中的变化进行了研究. 结果表明, 当退火温度为 600 K 时, 氧气在 Pt/Fe/Pt(111) 表面上解离吸附并诱导表面局域结构的重构; 750 K 时次表层 Fe 可以扩散到表面并被氧化; 当升至 850 K 时, 在样品表面形成单层 FeO 结构, 并且 FeO 表面具有周期性的缺陷. 这种缺陷是由于单层 FeO 薄膜的摩尔条纹单胞中 fcc 位上一个或多个氧原子缺失形成的, 其中多原子空位被确定为缺失 6 个氧原子所致. FeO 表面缺陷结构的研究为理解 Fe-Pt 催化剂在氧化气氛中的结构稳定性以及构造表面活性位提供一定的基础.     

Mechanism of CO oxidation reaction on O-covered Pd(111) surfaces studied with fast x-ray photoelectron spectroscopy: change of reaction path accompanying phase transition of O domains

We studied the mechanism of CO oxidation on O-precovered Pd(111) surfaces by means of fast x-ray photoelectron spectroscopy (XPS). The oxygen overlayer is compressed upon CO coadsorption from a p(2 x 2) structure into a (square root(3) x square root(3))R30 degrees structure and then into a p(2 x 1) structure with increasing CO coverage. These three O phases exhibit distinctly different reactivities. (1) The p(2 x 2) phase does not react with CO unless the surface temperature is sufficiently high (<290 K). (2) In the square root(3) x square root(3))R30 degrees phase, the reaction occurs exclusively at island peripheries. CO molecules in a high-density phase formed under CO exposure react with oxygen atoms, leading to quite a small apparent activation energy. (3) The reaction proceeds uniformly over the islands in the p(2 x 1) phase.     

Potential energy surfaces for oxygen adsorption, dissociation, and diffusion at the Pt(321) surface

We report a first-principles, periodic supercell analysis of oxygen adsorption, diffusion, and dissociation at the kinked Pt(321) surface. Binding energies and binding site preferences of isolated oxygen atoms and molecules have been determined, and we show that both atomic and molecular oxygen prefer binding in bridge sites involving coordinatively unsaturated kink Pt atoms. Binding energies of atomic and molecular oxygen in different sites correlate well with the average metallic Pt coordination number of Pt atoms forming each site, although differences exist between adsorbates in symmetrically similar sites due to the inherent chirality of the surface. Atomic O in the strongest binding bridge sites experiences relatively small energy barriers for diffusion to neighboring sites compared to O on Pt(111). However, due to the structure of the surface, O diffusion is only rapid between different sites around the kink Pt atom, whereas the effective long-range tracer diffusion, as determined from a simple course-grain model, is shown to be anisotropic and slower than on the Pt(111) surface. Four dissociation pathways for O(2) at low coverage are also reported and found to be in agreement with experimental observations of facile dissociation, even at low temperature.     

Kinetics of the CO oxidation reaction on Pt(111) studied by in situ high-resolution x-ray photoelectron spectroscopy

High-resolution x-ray photoelectron spectroscopy has been used to study the kinetics of the CO oxidation reaction on a Pt(111) surface in situ. The study focuses on the interaction of a preadsorbed p(2x2) layer of atomic oxygen with CO dosed using a supersonic molecular beam. Measurements of O 1s and C 1s spectra at 120 K show that CO adsorbs on the oxygen precovered substrate, but no reaction occurs. A maximum CO coverage of 0.23 ML (monolayer) is observed, with CO exclusively bound on on-top sites. In accordance with the literature, bridge sites are blocked by the presence of atomic oxygen. The reaction of CO with preadsorbed O to CO(2) is studied isothermally in a temperature range between 275 and 305 K. The reaction rate initially increases with CO pressure, but saturates at 9x10(-7) mbar. The data indicate that a certain amount of disordered oxygen within the p(2x2) layer acts as a starting point of the reaction and for a given temperature reacts with a higher rate than O in the well-ordered oxygen p(2x2) phase. For the reaction of CO with this ordered phase, the results confirm the assumption of a reaction mechanism, which is restricted to the edges of compact oxygen islands. The activation energy of the reaction is determined to (0.53+/-0.04) eV, with a prefactor of 4.7x10(6+/-0.7) s(-1).     

硫酸溶液中Pt(111)电极面上存在SO2-4的XPS证据

Pt（111）电极在硫酸溶液中的循环伏安图已被多个研究小组所得到[1-3]．对图上出现的高于正常氢吸脱附电位出现的两个电流峰（Clavilier等[1]首次发现并称之为异常峰）的解释至今没有得到一致意见．分歧焦点是异常峰的出现是由于强键合吸附氢还是吸附其它阴离子所致·本文用XPS和LEED研究异常峰电位处浮出的Pt（111）电极表面，发现尖锐异常峰的出现是由于表面上吸附了离子．1实验文献＊中详细说明了实验所用装置．主要部份是把装有XPS、LEED、MS、Ar“枪的超高真空腔门HV）与测量循环伏安图的腔（EC）联在一起·UHV中基压强为4x…     

Enhanced reactivity of Pt nanoparticles supported on ceria thin films during ethylene dehydrogenation

The adsorption and reaction of ethylene on Pt/CeO(2-x)/Cu(111) model catalysts were studied by means of high resolution photoelectron spectroscopy (HR-PES) in conjunction with resonant photoemission spectroscopy (RPES). The dehydrogenation mechanism is compared to the HR-PES data obtained on a Pt(111) single crystal under identical conditions. It was found that the Pt nanoparticle system shows a substantially enhanced reactivity and several additional reaction pathways. In sharp contrast to Pt(111), partial dehydrogenation of ethylene on the supported Pt nanoparticles already starts at temperatures as low as 100 K. Similar to the single crystal surface, dehydrogenation occurs via the isomer ethylidene (CHCH(3)) and then mainly via ethylidyne (CCH(3)). In the temperature region between 100 and 250 K there is strong evidence for spillover of hydrocarbon fragments to the ceria support. In addition, splitting of ethylene to C(1) fragments is more facile than on Pt(111), giving rise to the formation of CH species and CO in the temperature region between 250 and 400 K. Upon further annealing, carbonaceous deposits are formed at 450 K. By heating to 700 K, these carbon deposits are completely removed from the surface by reaction with oxygen, provided by reverse spillover of oxygen from the ceria support.     

Interaction of Au with thin ZrO2 films: influence of ZrO2 morphology on the adsorption and thermal stability of Au nanoparticles

The model catalysts of ZrO(2)-supported Au nanoparticles have been prepared by deposition of Au atoms onto the surfaces of thin ZrO(2) films with different morphologies. The adsorption and thermal stability of Au nanoparticles on thin ZrO(2) films have been investigated using synchrotron radiation photoemission spectroscopy (SRPES) and X-ray photoelectron spectroscopy (XPS). The thin ZrO(2) films were prepared by two different methods, giving rise to different morphologies. The first method utilized wet chemical impregnation to synthesize the thin ZrO(2) film through the procedure of first spin-coating a zirconium ethoxide (Zr(OC(2)H(5))(4)) precursor onto a SiO(2)/Si(100) substrate at room temperature followed by calcination at 773 K for 12 h. Scanning electron microscopy (SEM) investigations indicate that highly porous "sponge-like nanostructures" were obtained in this case. The second method was epitaxial growth of a ZrO(2)(111) film through vacuum evaporation of Zr metal onto Pt(111) in 1 × 10(-6) Torr of oxygen at 550 K followed by annealing at 1000 K. The structural analysis with low energy electron diffraction (LEED) of this film exhibits good long-range ordering. It has been found that Au forms smaller particles on the porous ZrO(2) film as compared to those on the ordered ZrO(2)(111) film at a given coverage. Thermal annealing experiments demonstrate that Au particles are more thermally stable on the porous ZrO(2) surface than on the ZrO(2)(111) surface, although on both surfaces, Au particles experience significant sintering at elevated temperatures. In addition, by annealing the surfaces to 1100 K, Au particles desorb completely from ZrO(2)(111) but not from porous ZrO(2). The enhanced thermal stability for Au on porous ZrO(2) can be attributed to the stronger interaction of the adsorbed Au with the defects and the hindered migration or coalescence resulting from the porous structures.     

Molecular dynamics of hydrogen dissociation on an oxygen covered Pt(111) surface

The dissociation of hydrogen on a Pt(111) surface covered with a p(2 x 2) oxygen phase was investigated using quasiclassical, six-dimensional molecular dynamics. The potential energy surface (PES) used in these simulations was obtained by an iterative novelty sampling algorithm. Compared to molecular beam experiments performed under similar conditions, the simulations give an accurate prediction of the reaction probability via a direct dissociation pathway. When compared to previously reported reaction probability curves for the clean Pt(111) surface, we find that the presence of an oxygen overlayer inhibits the direct pathway to hydrogen dissociation. This inhibition is a function of incident energy and cannot be described by a simple site blocking model. An indirect pathway to dissociation, which was observed in experiments, is not properly captured by the PES. Spatially resolved "reaction maps" indicate that the preferred site for hydrogen dissociation on an oxygen covered Pt surface is the top site of the Pt atom farthest from the adsorbed oxygen atom.     

The structure of hydrogen adsorbed on Ni(111) at low temperature by leed intensity analysis

Observed and calculated LEED intensity spectra for the p(2 × 2) pattern given by the adsorption of hydrogen on Ni(111) at 173 K are reported. Among the several model geometries tried that with the hydrogen atoms adsorbed in one of the two possible hollow sites seems to be the most probable.     

Infrared spectroscopy of physisorbed and chemisorbed O2 on Pt(111)

The adsorption of O2 on the Pt(111) surface, with particular emphasis on the influence of substrate temperature, has been studied by infrared reflection absorption spectroscopy (IRAS). In the temperature range 30-90 K the IRAS spectra reveal three different molecular adsorption states. A physisorbed state appears below 40 K while chemisorbed peroxo- and superoxo-like states are observed in the whole temperature range, the characteristic vibrational frequencies are at full coverages of 16O2, 1543 cm(-1) and around 700 cm(-1) and 870 cm(-1), respectively. Flash heating from 30 K to 45 K reveal that the physisorbed state acts as a precursor to the superoxo chemisorption. Theoretical calculations suggest that peroxo molecules may occupy both fcc and hcp threefold sites on the Pt(111) surface. However, within the high resolution of the IRAS measurements we only observe one peroxo state in the temperature range 45-90 K, assigned to occupy the fcc site. The peroxo adsorption probability is significantly lower at 45 K than at 90 K, presumably due to reduced thermal activation from the physisorbed precursor state. A longer lifetime in this precursor state at the low temperature results in formation of larger superoxo islands already at low oxygen coverage.