Kinetics of α-olefin metathesis over the heterogeneous catalytic system (MoOCl<Subscript>4</Subscript>/SiO<Subscript>2</Subscript>)-SnMe<Subscript>4</Subscript>

The kinetics of 1-hexene and 1-octene metathesis over the (MoOC_l4/SiO₂)-SnMe₄ catalytic system at 27 and 50°C has been investigated. The rate constants of the forward and reverse reactions and the catalyst deactivation constants have been measured. The number of active sites has been determined to be 10–13 mol % of the total number of molybdenum atoms.     

Nucleophilic addition of aromatic amide oximes to [2-B<Subscript>10</Subscript>H<Subscript>9</Subscript>NCC<Subscript>2</Subscript>H<Subscript>5</Subscript>]<Superscript>–</Superscript> anion

A series of closo-decaborate anions containing an O-iminoacylamide oxime fragment were synthesized by nucleophilic addition of aromatic amide oximes to 2-propionitrilium closo-decaborate anion. The isolated compounds were characterized by IR, ¹H, ¹³C–{¹H}, and ¹¹B–{¹H} NMR, and mass spectra. The structure of (Ph₄P)[2-B₁₀H₉NH=C(Et)ON=C(NH₂)C₆H₄Me-2] was determined by single-crystal X-ray analysis.     

Synthesis of N-α-pyridylmethyl amino alcohols and application in catalytic asymmetric addition of diethylzinc to aromatic aldehydes

A series of novel chiral ligands 2a–2f were conveniently prepared from β-amino alcohols through a two-step reaction and applied to catalyze the enantioselective addition of diethylzinc to benzaldehyde. Among them, ligand 2c was found to show the best asymmetric induction and catalyze the reaction of various aromatic aldehydes to provide (R)-secondary alcohols in up to 98.3% ee.     

Phase formation in the system Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>–MgMoO<Subscript>4</Subscript>–Sc<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Phase formation in the system Li₂MoO₄–MgMoO₄–Sc₂(MoO₄)₃ was studied by X-ray powder diffraction analysis and differential thermal analysis. Ternary molybdate LiMgSc(MoO₄)₃ was synthesized, which crystallizes in the triclinic system (space group P\(\bar 1\)). In the Li₂Mg₂(MoO₄)₃–Li₃Sc(MoO₄)₃ section, a continuous solid solution in the rhombic system was found to form (space group Pnma).     

Study of the NaF–NaBr–Na<Subscript>2</Subscript>SO<Subscript>4</Subscript> system

The NaBr–D (Na₃FSO₄) quasi-binary system and the NaF–NaBr–Na₂SO₄ ternary system were studied by differential thermal analysis. The melting points and compositions of eutectic mixtures were determined, and in-, mono-, and divariant equilibrium states were described.     

High-temperature reactions in the Co<Subscript>3</Subscript>Cr<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>6</Subscript>–Cr(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> system

A new dichromium(III) cobalt(II) diphosphate(V) of the formula CoCr₂(P₂O₇)₂ was detected in the Co₃Cr₄(PO₄)₆–Cr(PO₃)₃ system. The new compound was obtained as a result of high-temperature solid-state reactions between CoCO₃, Cr₂O₃ and (NH₄)₂HPO₄ as well as between Cr(PO₃)₃ and Co₃Cr₄(PO₄)₆. CoCr₂(P₂O₇)₂ was characterized using XRD, DTA and IR methods. Results demonstrated that CoCr₂(P₂O₇)₂ crystallizes in the triclinic system and its unit cell parameters were calculated. Its infrared spectrum was presented. CoCr₂(P₂O₇)₂ melts incongruently at 1270±10 °C with a formation of solid α-CrPO₄. The compound Co₃Cr₄(PO₄)₆, component of the system under study, was obtained for the first time as a pure phase. Its thermal stability was also investigated. Co₃Cr₄(PO₄)₆ is stable in air up to 1410 ± 20 °C.     

Zr<Subscript>5</Subscript>Ir<Subscript>2</Subscript>In<Subscript>4</Subscript> – A Superstructure of the Lu<Subscript>5</Subscript>Ni<Subscript>2</Subscript>In<Subscript>4</Subscript> Type

Summary. Zr₅Ir₂In₄ was synthesized by reaction of the elements in a glassy carbon crucible in a water-cooled sample chamber of an induction furnace. The sample was characterized by X-ray diffraction on both powder and single crystals. Zr₅Ir₂In₄ crystallizes with a pronounced Lu₅Ni₂In₄ type subcell, space group Pbam, a=1739.5(6), b=766.3(2), c=338.9(2) pm. Weak additional reflections force a doubling of the subcell c axis. The superstructure of Zr₅Ir₂In₄ is of a new type: Pnma, a=1739.5(6), b=677.8(2), c=766.3(2) pm, wR2=0.0529, 1592 F² values, and 60 variable parameters. The group-subgroup scheme for the klassengleiche symmetry reduction is presented. The formation of the superstructure is most likely due to a puckering effect (size of the iridium atoms). The crystal chemistry of Zr₅Ir₂In₄ is briefly discussed.     

Diagram of the PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript> system

A phase diagram of the PbF₂–SnF₂ system has been studied by differential thermal analysis and X-ray powder diffraction. The system forms Pb_1–хSn_хF₂ (х ≤ 0.33) solid solution and three compounds. Pb₂SnF₆ decomposes in solid state by a peritectoid reaction at 350°С; Pb₃Sn₂F₁₀ and PbSnF₄ melt by peritectic reactions at 565 and 380°С, respectively. The eutectic coordinates are 180°С, 90 mol % SnF₂.     

A new method of synthesis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

A new method of synthesis of the B₃H₈⁻ anion has been suggested. The method uses the reaction of some metal halides (CuCl, SnCl₂, CrCl₃, PbF₂, PbCl₂, PbBr₂, and BiCl₃) with sodium tetrahydroborate. It is characterized by high (up to quantitative) yields and simplicity of isolation of the target products ((n-C₄H₉)₄N)[B₃H₈] and Cs[B₃H₈].     

Synthesis of highly reactive polyisobutylenes with BF<Subscript>3</Subscript>·cyclohexanol initiating system

The selective cationic polymerization of isobutylene（IB）initiated by a BF₃·cyclohexanol（CL）complex was carried out from the mixed C₄ fraction feed containing the 4C saturated and unsaturated hydrocarbons at-20℃.The effects of CL concentration,BF₃ concentration,solvent for preparing BF₃·CL complex and polymerization time on the chemical structure of end groups,number-average molecular weight（M_n）and molecular weight distribution（MWD,M_w/M_n）of the resulting polymers were investigated.The experimental results indicate that the BF₃·CL complex initiating system exhibited an extremely high selectivity toward the cationic polymerization of IB in the mixed C₄ fraction feed and low molecular weight（M_n=900-3600）polyisobutylenes（PIBs）with large proportion of exo-double bond end groups were obtained.The exo-double bond content in PIB chain ends increased by increasing CL concentration or by decreasing solvent polarity in initiating system,BF₃ concentration and polymerization time.The M_n and MWD of the resulting PIBs were dependent on the concentrations of CL and BF₃.Highly reactive PIBs with around 90 mol%of exo-double bonds were successfully synthesized by the selective polymerization of IB from the mixed C₄ fraction feed,providing a potentially practical process for its simplicity and low costs.     

Study of the stable tetrahedron LiVO<Subscript>3</Subscript>–Li<Subscript>2</Subscript>MoO<Subscript>4</Subscript>–KBr–LiKMoO<Subscript>4</Subscript> of the quaternary reciprocal system Li,KǁBr,VO<Subscript>3</Subscript>,MoO<Subscript>4</Subscript>

Phase equilibria in the stable tetrahedron LiVO₃–Li₂MoO₄–KBr–LiKMoO₄ of the quaternary reciprocal system Li,K∥Br,VO₃,MoO₄ were studied by differential thermal analysis. The composition (mol %) and melting point of the alloy corresponding to a quaternary eutectic were determined: (24.2% LiVO₃, 10.4% Li₂MoO₄, 13.5% KBr, 51.9% LiKMoO₄, 407°С).     

Phase equilibria in the PbBi<Subscript>2</Subscript>S<Subscript>4</Subscript>–PbSnS<Subscript>2</Subscript> system

The PbBi₂S₄–PbSnS₂ system was studied by physicochemical analysis methods, and its state diagram was constructed. The system is partially quasi-binary; regions of solid solutions based on PbSnS₂ are determined. At a ratio between the initial components of 1: 1, congruently melting compound Pb₂SnBi₂S₆ forms. The unit cells parameters of Pb₂SnBi₂S₆ crystallizing in the orthorhombic system are: a = 15.60 Å, b = 7.80 Å, c = 4.26 Å; space group Pbmm.     

Possibility of using an UV–nano-TiO<Subscript>2</Subscript>–K<Subscript>2</Subscript>Cr<Subscript>2</Subscript>O<Subscript>7</Subscript> system for the determination of COD

The results of a study of the optimum oxidation conditions in the system UV?nano-Т?О₂–K₂Cr₂O₇ in a specially designed photoreactor are presented. The basic parameters of the photocatalytic oxidation of glucose and acetic acid were studied and optimized. The oxidation of organic compounds under the optimized conditions was studied. Nano-TiO₂ was shown to be a promising photocatalyst in the design of new oxidation systems for analytical purposes.     

Effect of potassium addition on bimetallic PtSn/θ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for dehydrogenation of propane to propylene

PtSn/θ-Al₂O₃ catalysts with different amounts of K (0.14, 0.22, 0.49, 0.72, and 0.96 wt%) are prepared to investigate the K effects on the PtSn catalyst in propane dehydrogenation (PDH). KPtSn catalyst with 0.xx wt% K, 0.5 wt% Pt and 0.75 wt% Sn is designated as xx-KPtSn. PDH was performed at 873 K and a gas hourly space velocity (GHSV) of 53,000 mL/g_cat h. The temperature-programmed desorption (NH₃-TPD), temperature-programmed reduction (TPR) and CO chemisorption of the KPtSn catalysts with K added revealed the potassium addition blocked the acid sites, promoted the reduction of Sn oxide and decreased the Pt dispersion. The formations of cracking products and higher hydrocarbons on acid sites were suppressed by the K effect of blocking the acid sites. In contrast, K addition at more than 0.72 wt% rather increased cracking products and the amount of coke, resulting in the severe deactivation of catalysts. The high cracking products on the KPtSn catalysts with the high amount of K should not be related to the acid sites, because the acid sites were monotonously decreased with an increase in the amount of K. Instead, the potassium affected the characteristics of PtSn. The interaction between Pt and Sn could be weakened by enriching the reduced Sn, because the K component promoted the reduction of Sn oxide in the TPR experiments. Therefore, the 14-KPtSn catalyst with the low amount of K exhibits the highest stability and selectivity among the prepared KPtSn catalysts due to the compromise of the advantageous (blocking the acid sites) and bad (weakening the interaction between Pt and Sn) effects of the K addition in PDH.     

Reactivity of the oxides in the ternary V<Subscript>2</Subscript>O<Subscript>5</Subscript>-CuO-α-Sb<Subscript>2</Subscript>O<Subscript>4</Subscript> system in air

In this work it has been established which compounds finally are formed in air in the two-component CuO-V₂O₅ and CuO-α-Sb₂O₄ systems. Unknown thermal properties of CuV₂O₆, Cu₂V₂O₇ and Cu₁₁V₆O₂₆ have been established. Reactivity of the oxides and phase relations in the ternary V₂O₅-CuO-α-Sb₂O₄ system in air have been studied by using XRD and DTA methods. The results have showed the reaction of V₂O₅, CuO with α-Sb₂O₄ does not produce any compound where all the three oxides would be involved. It has been established that the α-Sb₂O₄ reacts and forms binary phases independently with CuO or V₂O₅. On the base of these results the investigated system was divided into subsidiary subsystem in which CuSb₂O₆ remains at equilibrium in the solid state with other phases formed in corresponding binary systems.     

Interactions in the Sn<Subscript>2</Subscript>Sb<Subscript>6</Subscript>S<Subscript>11</Subscript>–PbSnSb<Subscript>4</Subscript>S<Subscript>8</Subscript> system

The Sn₂Sb₆S₁₁–PbSnSb₄S₈ system was studied by physicochemical analysis methods (differential thermal, X-ray powder diffraction, and microstructural analyses and microhardness and density measurements). It was found that this system is a quasi-binary section of the SnS–PbS–Sb₂S₃ ternary system of the eutectic type. The coordinates of the eutectic are 42 mol % PbSnSb₄S₈ and 600 K. In the studied system, regions of solid solutions were detected, which extend for solid solutions based on Sn₂Sb₆S₁₁ to 4 mol % PbSnSb₄S₈ (α) and for solid solutions based on PbSnSb₄S₈ to 6 mol % Sn₂Sb₆S₁₁ (β).     

Synthesis and isoconversional kinetic study of the formation of LiNiPO<Subscript>4</Subscript> from Ni<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>·8H<Subscript>2</Subscript>O as a new precursor

The nanosized LiNiPO₄ was successfully synthesized by a solid-state reaction between the new Ni₃(PO₄)₂·8H₂O precursor and Li₃PO₄ at 700 °C in air atmosphere. The formation of LiNiPO₄ was generated via three thermal decomposition steps. The samples were characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscopy, atomic absorption/atomic emission spectrophotometers, and thermogravimetric/differential thermal gravimetric/differential thermal analysis techniques. The activation energy (E_α) values of the three steps were calculated by Vyazovkin method and determined to be 90.39?±?5.79, 197.81?±?7.46, and 308.66?±?12.03 kJ mol^?1, respectively. The average E_α values from this method are very close to E_α from KAS method. The most probable mechanism functions g(α) of three steps were evaluated by using the masterplots method and found to be the F_1/3 (first step), F_3/2 (second step), and D₄ (final step), respectively. The pre-exponential factors (A) values of three steps were obtained based on the E_α and g(α). The kinetic triplet parameters of the formation of LiNiPO₄ from the new precursor are reported in the first time.     

Theoretical analysis of the system Li,K, Ca,Ba||F,WO<Subscript>4</Subscript>: Physicochemical properties of the system LiF–K<Subscript>2</Subscript>WO<Subscript>4</Subscript>–BaF<Subscript>2</Subscript>–CaF<Subscript>2</Subscript>–BaWO<Subscript>4</Subscript>

The differentiation of the quaternary reciprocal system Li, K, Ca, Ba||F, WO₄ was performed based on the graph theory using special software. Stable and metastable complexes of the system were found using a matrix of reciprocal pairs of salts. For the first time, by a set of physicochemical analysis methods (differential thermal, visual polythermal, and X-ray powder diffraction analyses), based on the method of thermal analysis of successive projections of the composition polytope, the quaternary system LiF–K₂WO₄–CaF₂–BaF₂–BaWO₄, which is a stable complex of the quaternary reciprocal system Li, K, Ca, Ba||F, WO₄, was studied and the coordinates of invariant points were determined.