Vectorial vortex mode transformation for a hollow waveguide using Pancharatnam-Berry phase optical elements

Transformation and inverse transformation between a free-space linearly polarized beam and the vectorial vortex mode of a circular hollow waveguide by use of Pancharatnam-Berry phase optical elements is proposed. Demonstration was achieved by fabricating GaAs subwavelength gratings and utilizing a 300 microm diameter hollow metallic waveguide for 10.6 microm wavelength CO(2) laser radiation. The mode transformations and the excitation of a single vectorial mode inside the hollow waveguide were verified by full polarization measurements. In addition, the inverse mode transformation of the single vectorial mode excitation in the waveguide enabled us to experimentally obtain a linearly polarized bright spot with a high central lobe.     

亚波长尺度下混合等离子泄漏模式激光

由于光存在衍射极限,因此传统方法不能实现亚波长尺度下的激光激射.为了打破这一衍射极限,本文设计了金属-介电层-半导体堆叠结构来实现深亚波长尺度下的激光激射,并讨论了相关结构对模式传播的影响.结构设计上,采用低介电常数金属银作为衬底、10?nm厚的LiF作为介电层、具有六边形截面的半导体纳米线ZnO作为高介电常数层,采用...     

All-dielectric bowtie waveguide with deep subwavelength mode confinement

Plasmonic waveguides and conventional dielectric waveguides have favorable characteristics in photonic integrated circuits. Typically, plasmonic waveguides can provide subwavelength mode confinement, as shown by their small mode area, whereas conventional dielectric waveguides guide light with low loss, as shown by their long propagation length. However, the simultaneous achievement of subwavelength mode confinement and low-loss propagation remains limited. In this paper, we propose a novel design of an alldielectric bowtie waveguide, which simultaneously exhibits both subwavelength mode confinement and theoretically lossless propagation. Contrary to traditional dielectric waveguides, where the guidance of light is based on total internal reflection, the principle of the all-dielectric bowtie waveguide is based on the combined use of the conservation of the normal component of the electric displacement and the tangential component of the electric field, such that it can achieve a mode area comparable to its plasmonic counterparts. The mode distribution in the all-dielectric bowtie waveguide can be precisely controlled by manipulating the geometric design. Our work shows that it is possible to achieve extreme light confinement by using dielectric instead of lossy metals.     

Circular grating coupler for creating focused azimuthally and radially polarized beams

We show a planar optical circuit design that takes light from an input waveguide and creates a focused azimuthally or radially polarized beam emanating from the surface of the substrate. It is implemented in silicon-on-insulator waveguides and does not require any external components to focus the beam. The focal spot size can be subwavelength and is potentially useful for lithography, imaging, optical data storage, optical trapping, optical excitation of molecules, or coupling to optical fibers.     

Dual-beam-reflection phenomenon due to leaky modes in a photonic band gap

We show a dual-beam-reflection phenomenon for a Gaussian beam illuminating a hybrid structure of a dielectric waveguide and photonic crystal (WG-PC) inside the photonic band gap by numerical simulations. One reflection beam has a giant negative lateral shift, but the other has a positive lateral shift. The finite-difference time-domain (FDTD) simulations show that this phenomenon has a time delay effect and comes from the leaky surface mode of the hybrid structure. Field profile of the leaky mode demonstrates a strong localized stationary field in the higher dielectric medium. Furthermore, the maximum lateral shift is almost two times of the waist of the incident beam.     

Full-vectorial analysis of bending waveguides using finite difference method based on H-fields in cylindrical coordinate systems

A full-vectorial (FV) analysis of optical dielectric waveguide bends by using finite difference (FD) method in terms of magnetic field components is developed in a local cylindrical coordinate system. The perfectly matched layer absorbing boundary conditions via the complex coordinate stretching technique are incorporated into the FV wave equations for effectively demonstrating the leaky nature of waveguide bends, and a six-point FD scheme is constructed to approximate the cross-coupling terms for improving the convergent behavior. The leaky modes of a typical rib waveguide bend are calculated and the complex propagation constants and the field patterns for TE- and TM-like modes are obtained. Solutions are good agreement with those from the film mode matching method, which shows the validity and utility of the established method.     

基于光子晶体的Kretschmann结构中自准直光束的Goos-Hänchen位移研究

利用平面波展开法和时域有限差分法, 模拟研究了基于自准直条件下的高斯光束入射光子晶体Kretschmann结构时发生的同时具有正向和负向Goos-Hänchen位移的双束反射现象. 研究表明, 反射光束中具有一束较小的正向位移, 而另一束具有较大的负向位移, 发现当Kretschmann结构支持的泄漏的表面模式被激发时才出现这一特殊现象; 表面模式的场分布说明介质波导中存在着强局域稳态场, 大的位移来自于表面模式与自准直体模式间的强耦合, 同时探讨了表面模式与光子晶体自准直体模式之间发生耦合的条件和影响参数. 本文负向位移最大达到-23.23a(a为晶格常数), 对应入射光波长的4.99倍, 是束腰半径的1.1615倍. 关键词： 光子晶体 自准直 Kretschmann结构 Goos-Hä nchen位移     

Absorption Measurement Using a Leaky Waveguide Mode

We propose an optical waveguide sensor using a leaky mode for absorption measurement of liquid samples. This sensor uses a single coupling prism. A cladding layer and a waveguide layer are directly deposited on the reflecting surface of the prism. The intensity of the internally reflected beam at an appropriate incident angle is very sensitive to the imaginary part of the sample attached to the surface of the waveguide layer. The sensitivity of this sensor is controlled by the thicknesses of both cladding and waveguide layers. We studied the performance of the sensor by numerical calculation.     

Efficient second-harmonic generation in nonlinear plasmonic waveguide

We theoretically studied a nonlinear optical process in a hybrid plasmonic waveguide composed of a nonlinear dielectric waveguide and a metal film with a separation of a thin air gap. Owing to the hybridization effect of guided mode and surface plasmon polariton mode, this particular waveguide is able to confine the optical-field in a deep subwavelength scale together with low propagation loss. Based on this, efficient second-harmonic generations (SHG) were revealed at the fundamental wavelength of λ=1.55?μm with good field confinement. The SHG efficiency, as well as the coupling coefficient and mode area, were analyzed and discussed in detail with respect to the structural parameters.     

Polarization-independent grating couplers for silicon-on-insulator nanophotonic waveguides

We propose the use of subwavelength structures in a waveguide grating to achieve polarization-independent coupling of light between an optical fiber and a silicon-on-insulator (SOI) optical waveguide. The subwavelength structure allows the mode effective indices of the TE and TM modes in the grating section to be precisely engineered. We calculate that coupling efficiency of over 64% is possible using the proposed design for polarization-independent coupling between single-mode optical fibers and SOI nanophotonic waveguides.     

Extraordinary Transmission through Metallic Grating with Subwavelength Slits for S-Polarization Illumination

Based on the rigorous coupled-wave analysis algorithm, we have systematically analysed the effect of the geometrical parameters of a dielectric film coated metallic grating with subwavelength slits on extraordinary optical transmission for s-polarization illumination. Results show that the dielectric film which sustains a waveguide electromagnetic mode on the top of the metallic lamellar grating can strongly enhance the transmittance, the positions of the transmission peaks are mainly determined by the period of the metallic grating, the thickness and refractive index of the dielectric film. This structure shows potential applications in excellent polarizers or polarization-isotropic devices at infrared spectral range by appropriately choosing the geometrical parameters.     

Leaky mode analysis of circular optical waveguides

A leaky mode is a bound mode below its cut-off frequency. It attenuates in the direction of propagation and approximates the portion of the radiation field within the optical waveguide that is significant far from the source. The characteristics, including attenuation coefficients, of leaky modes on the circular fibre are compared with those of the more familiar slab waveguide. Except for the HE_1m leaky modes, leaky modes attenuate much faster on the slab than on the circular fibre. The greater the /(azimuthal field variation) the smaller the attenuatioN. Thus, theI?1 leaky modes are important even at great distances from the source. An effective cut-off frequency is proposed. Above this frequency the mode is either weakly leaky or trapped. An expression for the number of weakly leaky and trapped modes is given. The power of leaky modes due to illuminating one end of the fibre is determined. The effect of material absorption is considered.     

A hybrid long-range surface plasmon waveguide comprising a narrow metal stripe surrounded by the low-index dielectric regions

A novel hybrid long-range surface plasmon waveguide structure comprising a narrow metal stripe, two relative low-index dielectric regions and dielectric ridges is proposed and analyzed. With the dielectric ridges and the two relative low-index dielectric regions symmetrically distributed on both sides of the narrow metal stripe, a symmetric hybrid long range mode with low electromagnetic transmission loss and subwavelength scale confinement is achieved. By optimizing the parameters, the propagation length of the proposed waveguide is increased to over two times to that of the conventional symmetric dielectric loaded surface plasmon waveguide, but the mode size only increases about 20%. For this benefit, the hybrid long-range surface plasmons waveguide is a good candidate for realizing high density photonic integration circuits.     

The problem of superresolution in reconstructing the dielectric-constant profile in a planar optical waveguide using the far field of the emission mode

An algorithm for analytical continuation of the Fourier transform for the mode field in a planar optical waveguide is suggested; this algorithm makes it possible to reconstruct the dielectric-constant profile in the waveguide using the far field of the mode emission with subwavelength resolution. The reconstruction errors were studied. Examples illustrating the efficiency of this approach are given.     

Design of a subwavelength bent C-aperture waveguide

We present a design for a subwavelength C-shaped optical waveguide with a 90 degrees junction that efficiently transports light while maintaining tight confinement with an exit spot size of lambda/7. Finite-difference time-domain simulations of perfect electric conductors and Au C-aperture waveguides are performed for optical frequencies. A design resonant near 780 nm is presented, with a spot size of 107 nm x 107 nm and an energy density enhancement factor of 10 for a bent waveguide of total length 1.4 microm.     

Resonantly enhanced transmission of light through subwavelength apertures with dielectric filling

Using both analytical and numerical methods to study transmission of light through dielectric-filled subwavelength apertures in a real metal, we have found that a propagating mode can in principle exist inside a waveguide of arbitrary small size if a particular relationship between the dielectric constants of the cladding and filling materials at the incident frequency is satisfied. Practical transmission through a subwavelength aperture of finite depth can be enhanced when the depth is such that Fabry-Pérot-like resonances are excited. For 810 nm light incident on a silicon-filled 50-nm-diameter aperture in a 200-nm-thick gold film, we found that a normalized near-field intensity ratio of 1.6 at the exit can be achieved. This resonantly enhanced transmission phenomenon may be advantageously applicable to near-field scanning optical microscopy and single-molecule spectroscopy.     

各向异性特异材料波导中表面等离子体的共振性质

使用时域有限差分法,研究了各向异性特异材料(AMM)作为包层的AMM/介质/AMM波导中表面等离子体的共振性质.色散关系表明,当特异材料为负磁导率的always-cutoff型时,AMM/介质/AMM波导支持TE极化的表面等离子体,表面等离子体的波长随着中间介质层的厚度和特异材料磁等离子体频率的减小而变短.在有限长度AMM/介质/AMM波导中,由于两端界面的反射,表面等离子体模在波导中形成Fabry-Perot共振,而实现亚波长的表面等离子体微腔.在共振频率,电场强度在微腔的中部达到最大值,而磁场分别在两端界面处达到最大,电磁能强局域在中间介质层中,这一性质将在可调的具有强局域特性的亚波长微腔及腔量子电动力学中具有潜在的应用.     

Integrated optical polarizer

Theoretical and experimental investigations of an integrated optical polarize are reported. The principle of the polarizer resides in transforming a waveguide into a leaky waveguide by depositing a dielectric multilayer superstrate comprising materials with higher refractive indices. The dielectric multilayer is so designed that TM modes are transmitted as the result of Brewster's law and interference effects, whereas TE modes are reflected back into the waveguide.     

基于耦合介质纳米线的深亚波长局域波导

提出了一种基于耦合介质纳米线的深亚波长局域波导,通过两根紧邻的高折射率介质纳米线的耦合,该波导可以将光场有效束缚在纳米线之间的低折射率纳米缝隙中. 计算模拟的结果表明,该波导的有效模场面积达到Λ²₀/200,比单根纳米线波导小一个数量级,这种深亚波长的模场束缚能力可以与表面等离激元混合波导相比拟. 计算模拟的结果还表明,纳米线可能带有的低折射率氧化膜、低折射率衬底的存在、以及纳米线间尺寸存在的一定差异对于该波导结构的实际应用都不会产生很大 关键词： 介质波导 亚波长局域 表面等离激元波导 纳米线     

Wave propagation in deep-subwavelength mode waveguides

This Letter proposes a dielectric waveguide with deep-subwavelength mode sizes. Results of both frequency domain and time domain analysis show that the effective mode area is below λ(0)(2)/400 and can even reach λ(0)(2)/1000 (λ(0) is the wavelength in vacuum). The effective electrical mode area can be comparable to that of a hybrid plasmonic subwavelength confinement waveguide, with reduced optical absorption. In contrast to slot waveguides, which guide light in low-index materials, the proposed structure guides light in high-index materials. Results obtained in this Letter show that the losses are sensitive to the surface roughness on the tens of nanometers scale. The structure can be used to design ring resonators with a quality factor comparable to that of a diffraction-limited dielectric ring resonator with the same standing wave numbers. The property can be applied in nonlinear effect enhancement or laser design with ultralow threshold.