Anion binding by fluorescent biimidazole diamides

Six 2,2'-biimidazoles with various amide groups at the 4- and 4'-positions were prepared from 5-propyl-1H-imidazole-4-carboxylic acid ethyl ester. In the final step of the synthesis, biimidazole C2-C2' bond formation was accomplished in 33-45% yield by palladium(0)-catalyzed homocoupling of the corresponding 2-iodoimidazoles. Four of the biimidazoles were studied by X-ray diffraction. In the solid state, all display coplanar imidazole rings, an anti relationship of amide groups, and intramolecular (NH(amide).N(imid)) and intermolecular (NH(imid).O(amide)) hydrogen bonding. In CH(2)Cl(2), the emission intensity of the biimidazoles is quenched by the presence of dihydrogenphosphate and chloride anions, but no shifts in lambda(emiss) are observed. Binding constants for 1:1 biimidazole-anion complexation (K(assoc)) are on the order of 10(4) M(-)(1) for H(2)PO(4)(-) and Cl(-). One of the receptors (bearing 3,5-difluorobenzylamides) is selective for chloride. The participation of the amide NH atoms in anion binding was established by (1)H NMR.     

Ferrocene-based anion receptor bearing amide and triazolium donor groups

A novel ferrocene-based anion receptor bearing amide and triazolium donor groups and its anion complexation have been reported. We found that it shows marked electrochemical selectivity to F(-), followed by AcO(-) > Cl(-) > Br(-) > I(-), which is in accordance with (1)H NMR titration results.     

Octadentate cages of Tb(III) 2-hydroxyisophthalamides: a new standard for luminescent lanthanide labels

The synthesis, structure, and photophysical properties of several Tb(III) complexes with octadentate, macrotricyclic ligands that feature a bicapped topology and 2-hydroxyisophthalamide (IAM) chelating units are reported. These Tb(III) complexes exhibit highly efficient emission (Φ(total) ≥ 50%), large extinction coefficients (ε(max) ≥ 20,000 M(-1) cm(-1)), and long luminescence lifetimes (τ(H(2)O) ≥ 2.45 ms) at dilute concentrations in standard biological buffers. The structure of the methyl-protected ligand was determined by single-crystal X-ray diffraction and confirms the macrotricyclic structure of the parent ligand; the amide groups of the methyl-protected cage compound generate an anion binding cavity that complexes a chloride anion. Once the ligand is deprotected, a conformational change generates a similar cavity, formed by the phenolate and ortho amide oxygen groups that strongly bind lanthanide ions. The Tb(III) complexes thus formed display long-term stability, with little if any change in their spectral properties (including lifetime, quantum yield, and emission spectrum) over time or in different chemical environments. Procedures to prepare functionalized derivatives with terminal amine, carboxylate, and N-hydroxysuccinimide groups suitable for derivatization and protein bioconjugation have also been developed. These bifunctional ligands have been covalently attached to a number of different proteins, and the terbium complexes' exceptional photophysical properties are retained. These compounds establish a new aqueous stability and quantum yield standard for long-lifetime lanthanide reporters.     

Transport of chloride and carboxyfluorescein through phospholipid vesicle membranes by heptapeptide amphiphiles

Seven synthetic anion transporters (SAT) of the general form R(2)N-COCH(2)OCH(2)CO-(Gly)(3)-Pro-(Gly)(3)-OR' were prepared. Three pairs of compounds each contained twin n-hexyl, n-decyl, and n-octadecyl (R) groups at the N-terminus and one contained twin n-tetradecyl groups. Three of the compounds were C-terminated by benzyl and three by heptyl (R') residues. The ability of these compounds to mediate ion release from phospholipid vesicles was assessed. Chloride release was measured by ion selective electrode measurements and by chloride quenching of the fluorescent dye lucigenin. Transport of the anion carboxyfluorescein (CF) was measured by fluorescence dequenching. Differences in both the C- (R') and N-terminal (R) residues within the ionophores affected anion transport. The chloride release data acquired by ion selective electrode and fluorescence methods were similar but not identical. A possible carrier mechanism for Cl(-) transport was discredited. Both Cl(-) and CF anions were released from vesicles by these compounds. The results of CF and Cl(-) transport showed good consistency when the ionophore's N-terminal chains were either decyl or octadecyl but not when they were hexyl. The transport of CF and Cl(-) appears to be fundamentally different when R is C(6) compared to C(10) or C(18). Differences between the behavior of SATs with Cl(-) and CF were also reflected in negative ion mass spectrometric studies.     

Anion binding versus intramolecular hydrogen bonding in neutral macrocyclic amides

Although amide groups are important hydrogen-bond donors in natural and synthetic anion receptors, studies on structure-affinity relationships of amide-based macrocyclic receptors are still very limited. Therefore, we synthesized a series of macrocyclic tetraamides 5-8 derived from 1,3-benzenedicarboxylic (isophthalic) acid and aliphatic alpha,omega-diamines of different lengths. (1)H NMR titrations in DMSO solution show that the anion affinity of these receptors decreases with increasing size of the macrocycle irrespective of the anion, and this suggests a minor role of geometric complementarity. Comparison with their previously studied pyridine congeners reveals that the isophthalic acid based macrocycles are less potent, in contrast to what was found for simple model diamides. Combined theoretical and experimental structural studies were carried out to determine the reasons behind this behaviour. The results show that the unexpectedly low anion binding ability of the isophthalic acid-based receptors is due to the self-complementary nature of the isophthalic bis-amide fragments: when two such moieties are present within a sufficiently flexible macrocycle, they adopt syn-anti conformations and bind each other by two strong intramolecular hydrogen bonds that close the macrocyclic cavity. Nevertheless, anion binding is able to break these hydrogen bonds and switch a macrocycle into a convergent all-syn conformation. Despite the ill-preorganized conformation, 20-membered receptor 6 is better than either its open-chain analogue (macrocyclic effect) and/or its isomer having differently placed carbonyl groups. The crystal structures of four anion complexes of the macrocyclic receptors are reported. X-ray studies and solution NMR data confirmed the inclusive nature of the complexes and pointed to strong involvement of aromatic CH hydrogen atoms in anion binding.     

Self-assembled metalla-bowls for selective sensing of multi-carboxylate anions

Two new tetranuclear cationic metalla-bowls 4 and 5 were self-assembled from a bis-pyridine amide ligand (H(2)L) (1) and arene-ruthenium acceptors, [(Ru(2)(μ-η(4)-C(2)O(4))(η(6)-p-cymene)(2)](O(3)SCF(3))(2) (2) and [Ru(2)(dhnd)(η(6)-p-cymene)(2)](O(3)SCF(3))(2) (dhnd = 6,11-dihydroxy-5,12-naphthacenedionato) (3), respectively. The metalla-bowls were characterized by multinuclear NMR, ESI-MS, UV-Vis spectroscopy, and single crystal X-ray diffraction study of 4. The crystal structure of 4 reveals unambiguous proof for the molecular shape of the metalla-bowl and the encapsulation of one triflate anion in the cavity through hydrogen bonding. The metalla-bowl 5 has been evaluated for anion binding studies by use of amide ligand as a hydrogen bond donor and arene-Ru acceptor as a signalling unit. UV-Vis titration studies showed that 5 selectively binds with multi-carboxylate anions such as oxalate, tartrate and citrate in a 1?:?1 fashion with high binding constants of 4.0-5.5 × 10(4) M(-1). Furthermore, the addition of multi-carboxylate anions into a solution of 5 gave rise to a large enhancement of fluorescence intensity attributable to the blocking of a photo-induced electron transfer process from the arene-ruthenium moiety to the amidic donor in 5. However, the fluorescence intensity almost remains unchanged upon addition of other anions including F(-), Cl(-), PF(6)(-), MeCOO(-), NO(3)(-) and PhCOO(-), as identically seen in the UV-Vis titration experiments, pointing to the high selectivity of 5 for the sensing of multi-carboxylate anions.     

Synthesis and characterization of a tripodal amide ligand and its binding with anions of different dimensionality

Synthesis and crystal structure of a tren-based amide, L(1), N,N',N'-tris[(2-amino-ethyl)-3-nitro-benzamide] is reported. The crystallographic results show intramolecular hydrogen bonding and aromatic pi...pi stacking among tripodal arms which prevent opening of the receptor cavity. Intermolecular hydrogen bonding in L1 generates the sheetlike network in the solid state. The structural aspects of binding halides (1 and 2), nitrate (3), perchlorate (4), and hexafluorosilicate (5) with the protonated L1 are examined crystallographically. Protonation at the apical nitrogen of L1 in the presence of anions shows a structural transformation from sheet to bilayer network. Anion binding with multiple receptor units is observed via amide N-H...anion and aryl C-H...anion hydrogen-bonding interactions in all the complexes. The aryl group having nitro functionality that contributes to anion binding in complexes 1-5 through CH...anion interactions (either para or meta to nitro C-H) is noteworthy. These studies also show higher anion coordination of chloride (8) and hexafluorosilicate (14) with L1H+.     

Molecular mechanisms of ion-specific effects on proteins

The specific binding sites of Hofmeister ions with an uncharged 600-residue elastin-like polypeptide, (VPGVG)(120), were elucidated using a combination of NMR and thermodynamic measurements along with molecular dynamics simulations. It was found that the large soft anions such as SCN(-) and I(-) interact with the polypeptide backbone via a hybrid binding site that consists of the amide nitrogen and the adjacent α-carbon. The hydrocarbon groups at these sites bear a slight positive charge, which enhances anion binding without disrupting specific hydrogen bonds to water molecules. The hydrophobic side chains do not contribute significantly to anion binding or the corresponding salting-in behavior of the biopolymer. Cl(-) binds far more weakly to the amide nitrogen/α-carbon binding site, while SO(4)(2-) is repelled from both the backbone and hydrophobic side chains of the polypeptide. The Na(+) counterions are also repelled from the polypeptide. The identification of these molecular-level binding sites provides new insights into the mechanism of peptide-anion interactions.     

1D and 2D assembly structures by imidazole···chloride hydrogen bonds of iron(II) complexes [Fe(II)(HL(n-Pr))3]Cl·Y (HL(n-Pr) = 2-methylimidazol-4-yl-methylideneamino-n-propyl; Y = AsF6, BF4) and their spin states

Two Fe(II) complexes fac-[Fe(II)(HL(n-Pr))(3)]Cl·Y (Y = AsF(6) (1) and BF(4) (2)) were synthesized, where HL(n-Pr) is 2-methylimidazole-4-yl-methylideneamino-n-propyl. Each complex-cation has the same octahedral N(6) geometry coordinated by three bidentate ligands and assumes facial-isomerism, fac-[Fe(II)(HL(n-Pr))(3)](2+) with Δ- and Λ-enantiomorphs. Three imidazole groups per Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) are hydrogen-bonded to three Cl(-) ions or, from the viewpoint of the Cl(-) ion, one Cl(-) ion is hydrogen-bonded to three neighbouring fac-[Fe(II)(HL(n-Pr))(3)](2+) cations. The 3?:?3 NH···Cl(-) hydrogen bonds between Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) and Cl(-) generate two kinds of assembly structures. The directions of the 3?:?3 NH···Cl(-) hydrogen bonds and hence the resulting assembly structures are determined by the size of the anion Y, though Y is not involved into the network structure and just accommodated in the cavity. Compound 1 has a 1D ladder structure giving a larger cavity, in which the Δ- and Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) enantiomorphs are bridged by two NH···Cl(-) hydrogen bonds. Compound 2 has a 2D network structure with a net unit of a cyclic trimer of {fac-[Fe(II)(HL(n-Pr))(3)](2+)···Cl(-)}(3) giving a smaller cavity, in which Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) species with the same chirality are linked by NH···Cl(-) hydrogen bonds to give a homochiral 2D network structure. Magnetic susceptibility and M?ssbauer spectral measurements demonstrated that compound 1 showed an abrupt one-step spin crossover with 4.0 K thermal hysteresis of T(c↓) = 125.5 K and T(c↑) = 129.5 K and compound 2 showed no spin transition and stayed in the high-spin state over the 5-300 K temperature range.     

Novel ion-pair receptors based on hexahomotrioxacalix[3]arene derivatives

A series of novel heteroditopic hexahomotrioxacalix[3]arene triamide receptors capable of binding an anion and cation simultaneously in a cooperative fashion has been prepared. The lower rim functionalized cone-hexahomotrioxacalix[3]arene derivatives cone-5a-5d bearing three amide groups were synthesized from cone-3 by a stepwise reaction. The crystal structures of 5c and 5d and (1)H NMR studies in nonpolar solvents strongly indicate that a number of interesting intramolecular hydrogen bonding interactions exist in these receptors. The binding abilities of these compounds towards n-butylammonium chloride and bromide salts have been investigated using (1)H NMR titration experiments in CDCl(3) solvent. Owing to the 'flattened cone' conformations and intramolecular hydrogen bonding involving the amide NH and neighbouring O atoms in cone-5a-5d, the affinities toward n-Bu(4)NX (X = Cl(-) and Br(-)) were weakened. However, it should be noted that triamides cone-5a-5d show a single selectivity for halide anions in the presence of n-BuNH(3)(+) through intermolecular hydrogen bonding with the amide NH hydrogen atoms in the receptors in CDCl(3) solution. Association constants were calculated from the chemical shift changes of the amide protons.     

Synthesis of a large amino-phenolic cage. Synthesis, crystal structures, and acid-base and coordination behavior toward cations and anions

The synthesis and characterization of the new polyaza-phenolic-macrobicycle 32-hydroxy-1,4,7,10,13,16,19,22-octaazatricyclo-[11.11.7.1(26,30)]-diatriconta-26,28,Delta(30,32)-triene (L) are reported. L incorporates a 2,6-dimethyl-phenolic unit bridging two opposite amine functions of the [24]aneN(8) polyazamacrocyclic base to obtain a large cage. The basicity and binding properties of L toward Cu(II), Zn(II), and Cl(-) were determined by means of potentiometric measurements in aqueous solution (298.1 +/- 0.1 K, I = 0.15 mol dm(-3)). L can add up to six acidic protons, yielding the H(5)L(5+) species or the H(6)L(6+) species, depending on the ionic medium used. The molecular topology of L permits the formation of a highly positive three-dimensional cavity in the polyprotonated species that is able to host the chloride anion. This was detected both using potentiometric data, log K = 41.33 for the reaction L + 6H(+) + Cl(-) = H(6)LCl(5+), and in (35)Cl NMR experiments that showed interactions also with the H(5)L(5+) and H(4)L(4+) species. The anion is probably hosted inside the three-dimensional cavity of L, and stabilized by H-bonding interactions with the ammonium groups, as depicted in the crystal structure of the H(6)L(6+) cation reported. L forms mono- and dinuclear complexes with all the metal ions investigated; the dinuclear species are the only existing species with an L:M(II) molar ratio of 1:2 at pH higher than 6. The phenolate oxygen atom coordinates the two metal ions in a bridged disposition, drawing them inside the macrobicyclic cavity. The two metals were found to be quite isolated by the medium, and were coordinated by all the amine groups of L, as shown by the crystal structure of the dinuclear [Zn(2)H(-1)L](3+) species. This species can bind guests such as hydroxide and phosphate anions. Studies of anion binding in aqueous solution using pyrochatecol violet as the sensing guest revealed that the [Zn(2)H(-1)L](3+) species is able to bind one phosphate at physiological pH.     

Protonated macrobicyclic hosts containing pyridine head units for anion recognition

In this paper, we report two macrobicyclic receptors containing pyridine head units derived from 1,10-diaza-15-crown[5] (L1) or 4,13-diaza-18-crown[6] (L2) that can be protonated in MeCN and used for anion recognition. The interaction of these protonated lateral macrobicycles with different anions has been investigated by means of spectrophotometric titrations in MeCN. The association constants for the complexes of halide anions with the protonated macrobicycles follow the sequences Cl(-)>Br(-)>I(-)>F(-) (L1) and Cl(-)>F(-)>I(-)>Br(-) (L2), whereby an increase of more than two logarithmic units is observed from F(-) to Cl(-) for the binding constants of the receptor derived from L1. The association constants also indicate an important degree of selectivity of these macrobicyclic receptors for Cl(-) over Br(-) or I(-). The X-ray crystal structure analyses of the chloride and bromide complexes confirms the formation of the envisaged supramolecular complexes. Moreover, the binding constants indicate that these receptors present a high sulfate-to-nitrate binding selectivity. The stability trend observed for the recognition of halide anions by the macrobicycles presented herein as well as the sulfate-to-nitrate binding selectivity have been rationalised by means of DFT calculations at the B3LYP/LanL2DZ level. These studies indicate that the especially high binding selectivity for Cl(-) is the result of the optimum fit between the protonated macrobicyclic cavity and the size of the anion, whereas the sulfate-to-nitrate selectivity results from shape complementarity between the hydrogen-binding acceptor sites on sulfate and the hydrogen-bond donors of the macrobicycle.     

Fragmentation pathways of deprotonated amide‐sulfonamide CXCR4 inhibitors investigated by ESI‐IT‐MSn,ESI‐Q‐TOF‐MS/MS and DFT calculations

Amide‐sulfonamides provide a potent anti‐inflammatory scaffold targeting the CXCR4 receptor. A series of novel amide‐sulfonamide derivatives were investigated for their gas‐phase fragmentation behaviors using electrospray ionization ion trap mass spectrometry and quadrupole time‐of‐flight mass spectrometry in negative ion mode. Upon collision‐induced dissociation (CID), deprotonated amide‐sulfonamides mainly underwent either an elimination of the amine to form the sulfonyl anion and amide anion or a benzoylamide derivative to provide sulfonamide anion bearing respective substituent groups. Based on the characteristic fragment ions and the deuterium–hydrogen exchange experiments, three possible fragmentation mechanisms corresponding to ion‐neutral complexes including [sulfonyl anion/amine] complex ( INC‐1 ), [sulfonamide anion/benzoylamide derivative] complex ( INC‐2 ) and [amide anion/sulfonamide] complex ( INC‐3 ), respectively, were proposed. These three ion‐neutral complexes might be produced by the cleavages of S–N and C–N bond from the amide‐sulfonamides, which generated the sulfonyl anion (Route 1), sulfonamide anion (Route 2) and the amide anion (Route 3). DFT calculations suggested that Route 1, which generated the sulfonyl anion (ion c ) is more favorable. In addition, the elimination of SO₂ through a three‐membered‐ring transition state followed by the formation of C–N was observed for all the amide‐sulfonamides.     

Cyclic tetranuclear and hexanuclear palladium(II) complexes and their host-guest chemistry

Cyclic tetrameric complexes have been prepared by the reaction of Pd(en)Cl2 or Pd(dapol)Cl2, or their nitrato analogues, with Na2(5'GMP) in aqueous solution, where en=1,2-diaminoethane, dapol=1,3-diamino-2-propanol, and 5'GMP=guanosine 5'-monophosphate. Addition of certain small molecules containing hydrophobic groups resulted in the expansion of the tetramer to a cyclic hexamer with strong bonding of one guest per hexameric host. At pH 5-6, the guest molecule can be a cation, anion, or neutral, and those species containing trimetylsilyl and t-butyl groups bonded the most strongly. The size of the central cavity of the [Pd(en)(5'GMP)]6 host has been estimated to be 5.2 A. Formation of the host-guest complex caused a large upfield shift (Deltadelta) of 2.5-2.9 ppm in the 1H NMR spectrum of the most highly affected guest protons, which were those in closest proximity to the guanine nucleobases. NOESY spectra were used to determine the interaction sites between the host and the guest. Apparent association constants determined at 26 degrees C and pD 5.4 for the [Pd(en)(5'GMP)]6-DSS and [Pd(en)(5'GMP)]6-t-butanol systems, where DSS is 3-(trimethylsilyl)-1-propanesulfonate anion, were 1.36+/-0.11x10(4) and 2.74+/-0.95x10(4) M(-3/2), respectively. The Pd(dapol)-5'GMP system forms hexameric host-guest complexes, similar in nature to those of the Pd(en)-5'GMP system. The molecular and crystal structures of Pd(dapol)Cl2 are also reported.     

Hydroxy Groups Enhance [2]Rotaxane Anion Binding Selectivity

We report the synthesis of two [2]rotaxanes containing an interlocked three dimensional binding cavity formed from a pyridinium bis(amide) axle component containing two phenol donors, and an isophthalamide based macrocycle. In the competitive solvent mixture 1 : 1 CDCl₃ : CD₃OD, one of the receptors exhibits a much higher selectivity preference for chloride than an analogous rotaxane without the hydroxy groups. X-ray crystal structures reveal the chloride anion guest encapsulated within the interlocked binding cavity, though not all of the hydrogen bond donors are utilised. Computational semi-empirical simulations indicate that secondary intermolecular interactions occur between the axle hydroxy hydrogen bond donors and the [2]rotaxane macrocycle components, contributing to a more preorganised binding pocket, which may be responsible for the observed enhanced selectivity.     

Chloride‐Anion‐Templated Synthesis of a Strapped‐Porphyrin‐Containing Catenane Host System

The synthesis, structure and anion‐recognition properties of a new strapped‐porphyrin‐containing [2]catenane anion host system are described. The assembly of the catenane is directed by discrete chloride anion templation acting in synergy with secondary aromatic donor–acceptor and coordinative pyridine–zinc interactions. The [2]catenane incorporates a three‐dimensional, hydrogen‐bond‐donating anion‐binding pocket; solid‐state structural analysis of the catenane?chloride complex reveals that the chloride anion is encapsulated within the catenane’s interlocked binding cavity through six convergent CH????Cl and NH???Cl hydrogen‐bonding interactions and solution‐phase ¹H NMR titration experiments demonstrate that this complementary hydrogen‐bonding arrangement facilitates the selective recognition of chloride over larger halide anions in DMSO solution.     

Calix[4]arene‐Based Rotaxane Host Systems for Anion Recognition

The synthesis, structure and anion binding properties of the first calix[4]arene‐based [2]rotaxane anion host systems are described. Rotaxanes 9? Cl and 12? Cl, consisting of a calix[4]arene functionalised macrocycle wheel and different pyridinium axle components, are prepared via adaption of an anion templated synthetic strategy to investigate the effect of preorganisation of the interlocked host’s binding cavity on anion binding. Rotaxane 12? Cl contains a conformationally flexible pyridinium axle, whereas rotaxane 9? Cl incorporates a more preorganised pyridinium axle component. The X‐ray crystal structure of 9? Cl and solution phase ¹H NMR spectroscopy demonstrate the successful interlocking of the calix[4]arene macrocycle and pyridinium axle components in the rotaxane structures. Following removal of the chloride anion template, anion binding studies on the resulting rotaxanes 9? PF₆ and 12? PF₆ reveal the importance of preorganisation of the host binding cavity on anion binding. The more preorganised rotaxane 9? PF₆ is the superior anion host system. The interlocked host cavity is selective for chloride in 1:1 CDCl₃/CD₃OD and remains selective for chloride and bromide in 10 % aqueous media over the more basic oxoanions. Rotaxane 12? PF₆ with a relatively conformationally flexible binding cavity is a less effective and discriminating anion host system although the rotaxane still binds halide anions in preference to oxoanions.     

Gas-phase carbene radical anions: new mechanistic insights

The gas-phase reactivity of the CHCl*- anion has been investigated with a series of halomethanes (CCl4, CHCl3, CH2Cl2, and CH3Cl) using a FA-SIFT instrument. Results show that this anion primarily reacts via substitution and by proton transfer. In addition, the reactions of CHCl*- with CHCl3 and CH2Cl2 form minor amounts of Cl2*- and Cl-. The isotopic distribution of these two products is consistent with an insertion-elimination mechanism, where the anion inserts into a C-Cl bond to form an unstable intermediate, which eliminates either Cl2*- or Cl- and Cl*. Neutral and cationic carbenes are known to insert into single bonds; however, this is the first observation of such reactivity for carbene anions.     

Theoretical study of the solvation of fluorine and chlorine anions by water

The solvation of fluoride and chloride anions (F(-) and Cl(-), respectively) by water has been studied using effective fragment potentials (EFPs) for the water molecules and ab initio quantum mechanics for the anions. In particular, the number of water molecules required to fully surround each anion has been investigated. Monte Carlo calculations have been used in an attempt to find the solvated system X(-)(H(2)O)(n) (X = F, Cl) with the lowest energy for each value of n. It is predicted that 18 water molecules are required to form a complete solvation shell around a Cl(-) anion, where "complete solvation" is interpreted as an ion that is completely surrounded by solvent molecules. Although fewer water molecules may fully solvate the Cl(-) anion, such structures are higher in energy than partially solvated molecules, up to n > or = 18. Calculations on the F(-) anion suggest that 15 water molecules are required for a complete solvation shell. The EFP predictions are in good agreement with the relative energies predicted by ab initio energy calculations at the EFP geometries.     

A new macrocyclic cryptand with squaramide moieties: an overstructured Cu(II) complex that selectively binds halides: synthesis, acid/base- and ligational behavior, and crystal structures

The synthesis and characterization of the novel 24,29-dimethyl-6,7,15,16-tetraoxotetracyclo-[19.5.5.0(5,8).0(14,17)]-1,4,9,13,18,21,24,29-octaazaenatriaconta-Delta(5,8),Delta(14,17)-diene (L) are reported. Molecule L incorporates two squaramide functions in a overstructured chain connecting two opposite nitrogen atoms of the Me(2)[12]aneN(4) polyaza macrocyclic base to obtain a cage topology. The basicity and binding properties of L towards Cu(II) were determined by means of potentiometric measurements in aqueous solution (298.1+/-0.1 K, I=0.15 mol dm(-3)). Molecule L behaves as a diprotic base under the experimental conditions employed and forms only mononuclear Cu(II) complexes in which the squaramide moieties are not involved in the stabilization of the metal ion that is stabilized by the amine functions of the polyaza base inside the three-dimensional cavity. The [CuL](2+) species was tested as a host for the series of halide anions. UV-visible spectrophotometric experiments permitted the determination of the addition constants of halides to the Cu(II)-complexed species. The [CuL](2+) species binds the anions F(-), Cl(-), and Br(-) by forming the [CuLX](+) species, but does not bind the biggest I(-) anion. A trend of selectivity as a function of the hydrogen-bonding capability as well as the dimensions of the anion were established; the maximum value of selectivity was for addition of the F(-) anion (log K=4.8). This selectivity is due to the presence of the overstructured chain containing the squaramide groups up to the Me(2)[12]aneN(4) macrocyclic base. The squaramide groups, by providing hydrogen-bond contacts, permit the [CuL](2+) species to selectively bind these anions through the formation of a hydrogen-bond network with F(-) and Cl(-). The crystal structures of the [CuLF](+) and [CuLCl](+) cations support the results obtained in aqueous solution.