General Formation of MxCo3−xS4 (M=Ni,Mn, Zn) Hollow Tubular Structures for Hybrid Supercapacitors

A simple and versatile method for general synthesis of uniform one‐dimensional (1D) M_xCo_3−xS₄ (M=Ni, Mn, Zn) hollow tubular structures (HTSs), using soft polymeric nanofibers as a template, is described. Fibrous core–shell polymer@M‐Co acetate hydroxide precursors with a controllable molar ratio of M/Co are first prepared, followed by a sulfidation process to obtain core–shell polymer@M_xCo_3−xS₄ composite nanofibers. The as‐made M_xCo_3−xS₄ HTSs have a high surface area and exhibit exceptional electrochemical performance as electrode materials for hybrid supercapacitors. For example, the MnCo₂S₄ HTS electrode can deliver specific capacitance of 1094 F g⁻¹ at 10 A g⁻¹, and the cycling stability is remarkable, with only about 6 % loss over 20 000 cycles.     

Hierarchical Tubular Structures Composed of Co3O4 Hollow Nanoparticles and Carbon Nanotubes for Lithium Storage

Hierarchical tubular structures composed of Co₃O₄ hollow nanoparticles and carbon nanotubes (CNTs) have been synthesized by an efficient multi‐step route. Starting from polymer‐cobalt acetate (Co(Ac)₂) composite nanofibers, uniform polymer‐Co(Ac)₂@zeolitic imidazolate framework‐67 (ZIF‐67) core–shell nanofibers are first synthesized via partial phase transformation with 2‐methylimidazole in ethanol. After the selective dissolution of polymer‐Co(Ac)₂ cores, the resulting ZIF‐67 tubular structures can be converted into hierarchical CNTs/Co‐carbon hybrids by annealing in Ar/H₂ atmosphere. Finally, the hierarchical CNT/Co₃O₄ microtubes are obtained by a subsequent thermal treatment in air. Impressively, the as‐prepared nanocomposite delivers a high reversible capacity of 1281 mAh g^?1 at 0.1 A g^?1 with exceptional rate capability and long cycle life over 200 cycles as an anode material for lithium‐ion batteries.     

Tunable and Specific Formation of C@NiCoP Peapods with Enhanced HER Activity and Lithium Storage Performance

The superior properties of nanomaterials with a special structure can provide prospects for highly efficient water splitting and lithium storage. Herein, we fabricated a series of peapodlike C@Ni_2?xCo_xP (x≤1) nanocomposites by an anion‐exchange pathway. The experimental results indicated that the HER activity of C@Ni_2?xCo_xP catalyst is strongly related to the Co/Ni ratio, and the C@NiCoP got the highest HER activity with low onset potential of ～45 mV, small Tafel slope of ～43 mV dec^?1, large exchange current density of 0.21 mA cm^?2, and high long‐term durability (60 h) in 0.5 m H₂SO₄ solutions. Equally importantly, as an anode electrode for lithium batteries, this peapodlike C@NiCoP nanocomposite gives excellent charge–discharge properties (e.g., specific capacity of 670 mAh g^?1 at 0.2 A g^?1 after 350 cycles, and a reversible capacity of 405 mAh g^?1 at a high current rate of 10 A g^?1). The outstanding performance of C@NiCoP in HER and LIBs could be attributed to the synergistic effect of the rational design of peapodlike nanostructures and the introduction of Co element.     

Cobalt‐Doped FeS2 Nanospheres with Complete Solid Solubility as a High‐Performance Anode Material for Sodium‐Ion Batteries

Considering that the high capacity, long‐term cycle life, and high‐rate capability of anode materials for sodium‐ion batteries (SIBs) is a bottleneck currently, a series of Co‐doped FeS₂ solid solutions with different Co contents were prepared by a facile solvothermal method, and for the first time their Na‐storage properties were investigated. The optimized Co_0.5Fe_0.5S₂ (Fe0.5) has discharge capacities of 0.220 Ah g^?1 after 5000 cycles at 2 A g^?1 and 0.172 Ah g^?1 even at 20 A g^?1 with compatible ether‐based electrolyte in a voltage window of 0.8–2.9 V. The Fe0.5 sample transforms to layered Na_xCo_0.5Fe_0.5S₂ by initial activation, and the layered structure is maintained during following cycles. The redox reactions of Na_xCo_0.5Fe_0.5S₂ are dominated by pseudocapacitive behavior, leading to fast Na⁺ insertion/extraction and durable cycle life. A Na₃V₂(PO₄)₃/Fe0.5 full cell was assembled, delivering an initial capacity of 0.340 Ah g^?1.     

Magnetocaloric Properties of Heterometallic 3d–Gd Complexes Based on the [Gd(oda)3]3− Metalloligand

A series of heterometallic 3d–Gd³⁺ complexes based on a lanthanide metalloligand, [M(H₂O)₆][Gd(oda)₃] ? 3 H₂O [M=Cr³⁺ ( 1‐Cr )] (H₂oda=2,2′‐oxydiacetic acid), [M(H₂O)₆][MGd(oda)₃]₂ ? 3 H₂O [M=Mn²⁺ ( 2‐Mn ), Fe²⁺ ( 2‐Fe ) and Co²⁺ ( 2‐Co )], and [M₃Gd₂(oda)₆(H₂O)₆] ? 12 H₂O [M=Ni²⁺ ( 3‐Ni ), Cu²⁺ ( 3‐Cu ), and Zn²⁺ ( 3‐Zn )], are reported. Magnetic and heat‐capacity studies revealed a significant impact on the magnetocaloric effect depending on the anisotropy of the 3d transition metal ions, as confirmed by comparison of the observed maximum values of ?ΔS_m between complexes 2‐Co and 1‐Cr . In these two complexes, the 3d metal ions have the same spin (S=3/2 for Co²⁺ and Cr³⁺ ions), and the theoretical calculation suggested a larger ?ΔS_m value for 2‐Co (47.8 J K^?1 kg^?1) than 1‐Cr (37.5 J K^?1 kg^?1); however, the significant anisotropy of Co²⁺ ions in 2‐Co , which can result in smaller effective spins, gives a smaller value of ?ΔS_m for 2‐Co (32.2 J K^?1 kg^?1) than for 1‐Cr (35.4 J K^?1 kg^?1) at ΔH=9 T.     

Flame Spray Pyrolysis for Finding Multicomponent Nanomaterials with Superior Electrochemical Properties in the CoOx‐FeOx System for Use in Lithium‐Ion Batteries

High‐temperature flame spray pyrolysis is employed for finding highly efficient nanomaterials for use in lithium‐ion batteries. CoO_x‐FeO_x nanopowders with various compositions are prepared by one‐pot high‐temperature flame spray pyrolysis. The Co and Fe components are uniformly distributed over the CoO_x‐FeO_x composite powders, irrespective of the Co/Fe mole ratio. The Co‐rich CoO_x‐FeO_x composite powders with Co/Fe mole ratios of 3:1 and 2:1 have mixed crystal structures with CoFe₂O₄ and Co₃O₄ phases. However, Co‐substituted magnetite composite powders prepared from spray solutions with Co and Fe components in mole ratios of 1:3, 1:2, and 1:1 have a single phase. Multicomponent CoO_x‐FeO_x powders with a Co/Fe mole ratio of 2:1 and a mixed crystal structure with Co₃O₄ and CoFe₂O₄ phases show high initial capacities and good cycling performance. The stable reversible discharge capacities of the composite powders with a Co/Fe mole ratio of 2:1 decrease from 1165 to 820 mA h g^?1 as the current density is increased from 500 to 5000 mA g^?1; however, the discharge capacity again increases to 1310 mA h g^?1 as the current density is restored to 500 mA g^?1.     

Double‐Helix Structure in Carrageenan–Metal Hydrogels: A General Approach to Porous Metal Sulfides/Carbon Aerogels with Excellent Sodium‐Ion Storage

The metal sulfide‐carbon nanocomposite is a new class of anode material for sodium ion batteries, but its development is restricted by its relative poor rate ability and cyclic stability. Herein, we report the use of double‐helix structure of carrageenan–metal hydrogels for the synthesis of 3D metal sulfide (M_xS_y) nanostructure/carbon aerogels (CAs) for high‐performance sodium‐ion storage. The method is unique, and can be used to make multiple M_xS_y/CAs (such as FeS/CA, Co₉S₈/CA, Ni₃S₄/CA, CuS/CA, ZnS/CA, and CdS/CA) with ultra‐small nanoparticles and hierarchical porous structure by pyrolyzing the carrageenan–metal hydrogels. The as‐prepared FeS/CA exhibits a high reversible capacity and excellent cycling stability (280 mA h^?1 at 0.5 A g^?1 over 200 cycles) and rate performance (222 mA h^?1 at 5 A g^?1) when used as the anode material for sodium‐ion batteries. The work shows the value of biomass‐derived metal sulfide–carbon heterostuctures in sodium‐ion storage.     

Electrochemical Oxidation of Nitrogen towards Direct Nitrate Production on Spinel Oxides

Nitrates are widely used as fertilizer and oxidizing agents. Commercial nitrate production from nitrogen involves high‐temperature‐high‐pressure multi‐step processes. Therefore, an alternative nitrate production method under ambient environment is of importance. Herein, an electrochemical nitrogen oxidation reaction (NOR) approach is developed to produce nitrate catalyzed by ZnFe_xCo_2?xO₄ spinel oxides. Theoretical and experimental results show Fe aids the formation of the first N?O bond on the *N site, while high oxidation state Co assists in stabilizing the absorbed OH^? for the generation of the second and third N?O bonds. Owing to the concerted catalysis, the ZnFe_0.4Co_1.6O₄ oxide demonstrates the highest nitrate production rate of 130±12 μmol h^?1 g_MO^?1 at an applied potential of 1.6 V versus the reversible hydrogen electrode (RHE).     

Meso-macroporous Co3O4 electrode prepared by polystyrene spheres and carbowax templates for supercapacitors

Meso-macroporous Co₃O₄ electrode is synthesized by drop coating with a mixed solution containing Co(OH)₂ colloid, polystyrene spheres, and carbowax (namely polyethylene glycol), followed by calcining at 400?°C to remove polystyrene spheres and carbowax. For comparison, nonporous Co₃O₄ and mesoporous Co₃O₄ electrodes are prepared by drop coating with Co(OH)₂ colloid and with a mixed solution containing Co(OH)₂ colloid and carbowax under the same condition, respectively. Capacitive property of these electrodes is measured by cyclic voltammetry, potentiometry and electrochemical impedance spectroscopy. The results show that meso-macroporous Co₃O₄ electrode exhibits larger specific capacitance than those of nonporous Co₃O₄ electrode and mesoporous Co₃O₄ electrode at various current densities. The specific capacitance of meso-macroporous Co₃O₄ electrode at the current density of 0.2?A?g^?1 is 453?F?g^?1. Meanwhile, meso-macroporous Co₃O₄ electrode possesses the highest specific capacitance retention ratio at the current density ranging from 0.2 to 1.0?A?g^?1, indicating that meso-macroporous Co₃O₄ electrode suits to high-rate charge?Cdischarge.     

Preparation of Yolk‐Shell and Filled Co9S8 Microspheres and Comparison of their Electrochemical Properties

In this study, we report the first preparation of phase‐pure Co₉S₈ yolk–shell microspheres in a facile two‐step process and their improved electrochemical properties. Yolk–shell Co₃O₄ precursor microspheres are initially obtained by spray pyrolysis and are subsequently transformed into Co₉S₈ yolk–shell microspheres by simple sulfidation in the presence of thiourea as a sulfur source at 350 °C under a reducing atmosphere. For comparison, filled Co₉S₈ microspheres were also prepared using the same procedure but in the absence of sucrose during the spray pyrolysis. The prepared yolk–shell Co₉S₈ microspheres exhibited a Brunauer–Emmett–Teller (BET) specific surface area of 18 m² g^?1 with a mean pore size of 16 nm. The yolk–shell Co₉S₈ microspheres have initial discharge and charge capacities of 1008 and 767 mA h g^?1 at a current density of 1000 mA g^?1, respectively, while the filled Co₉S₈ microspheres have initial discharge and charge capacities of 838 and 638 mA h g^?1, respectively. After 100 cycles, the discharge capacities of the yolk–shell and filled microspheres are 634 and 434 mA h g^?1, respectively, and the corresponding capacity retentions after the first cycle are 82 % and 66 %.     

Stepwise Assembly of MII7 Clusters Revealed by Mass Spectrometry,EXAFS, and Crystallography

The square‐planar monomer NiL₂ ( Ni₁ ), L=2‐ethoxy‐6‐(N‐methyl‐iminomethyl)phenolate, reacts with M(H₂O)₆(ClO₄)₂, M=Ni or Co, to form heptanuclear disks [Co_xNi_7?x(OH)₆(L)₆](ClO₄)₂ ? 2 CH₃CN ( Co _x Ni_7?x , x=0–7) and the co‐crystal [Co_xNi_7?x(OH)₆L₆][NiL₂](ClO₄)₂ ? 2 CH₃CN ( Co _x Ni_7?x ‐Ni₁ ) under ambient conditions. It has proved possible to explore the bottom‐up assembly process of Co _x Ni_7?x and Co _x Ni_7?x ‐Ni₁ in real time. The final products have been characterized by thermogravimetric analysis, IR, elemental analysis, ICP‐MS, and single‐crystal X‐ray diffraction. Time‐dependent mass spectrometry (MS) revealed the following reaction steps: Ni₁→[M₂L₃]⁺→[M₄(OH)₂L₄]²⁺→[M₇(OH)₆L₆]²⁺. In contrast, the reaction of Ni₁ with Zn²⁺ only reaches halfway, and crystallographic evidence indicates a butterfly structure for [Zn₂Ni₂(OH)₂Cl₂] ( Zn₂Ni₂ ), an intermediate that is difficult to isolate in the above Ni‐Co series. A summation method has been used to analyze the MS of bimetallic clusters with very similar atomic masses, as is the case for Co and Ni. The results provide ample information on the distribution of Co and Ni within each cluster and their statistical distribution within selected crystals.     

Electrochemical Hydrogen Storage in Ti1.6V0.4Ni1−xCox Icosahedral Quasicrystalline Alloys

The discovery of the icosahedral phase (i‐phase) in rapidly quenched Ti_1.6V_0.4Ni_1?xCo_x (x=0.02–0.1) alloys is described herein. The i‐phase occurs in a similar amount relative to the coexisting β‐Ti phase. The electron diffraction patterns show the distinct spot anisotropy, indicating that the i‐phase is metastable. The electrochemical hydrogen storage performances of these five alloy electrodes are also reported herein. The hydrogen desorption of nonelectrochemical recombination in the cyclic voltammetric (CV) response exhibits the demand for electrocatalytic activity improvement. A discharge capacity of 261.5 mA h g^?1 was measured in a Ti_1.6V_0.4Ni_0.96Co_0.04 alloy electrode at 30 mA g^?1 and 303 K and it is shown that an appropriate amount of Co element addition would enhance the cycling stability at the expense of high‐rate discharging ability.     

Developing Intense Blue and Magenta Colors in α‐LiZnBO3: The Role of 3d‐Metal Substitution and Coordination

We describe the synthesis, crystal structures, and optical absorption spectra/colors of 3d‐transition‐metal‐substituted α‐LiZnBO₃ derivatives: α‐LiZn_1?xM^II_xBO₃ (M^II=Co^II (0<x<0.50), Ni^II (0<x≤0.05), Cu^II (0<x≤0.10)) and α‐Li_1+xZn_1?2xM^III_xBO₃ (M^III=Mn^III (0<x≤0.10), Fe^III (0<x≤0.25)). The crystal structure of the host α‐LiZnBO₃, which is both disordered and distorted with respect to Li and Zn occupancies and coordination geometries, is largely retained in the derivatives, which gives rise to unique colors (blue for Co^II, magenta for Ni^II, violet for Cu^II) that could be of significance for the development of new, inexpensive, and environmentally friendly pigment materials, particularly in the case of the blue pigments. Accordingly, this work identifies distorted tetrahedral MO₄ (M=Co, Ni, Cu) structural units, with a long M?O bond that results in trigonal bipyramidal geometry, as new chromophores for blue, magenta, and violet colors in a α‐LiZnBO₃ host. From the L*a*b* color coordinates, we found that Co‐substituted compounds have an intense blue color that is stronger than that of CoAl₂O₄ and YIn_0.90Mn_0.10O₃. The near‐infrared (NIR) reflectance spectral studies indicate that these compounds exhibit a moderate IR reflectivity that could be significant for applications as “cool pigments”.     

Synthesis, crystal structures and magnetic properties of M(II)Cu(II) chains (M = Mn and Co) with sterically hindered alkyl-substituted phenyloxamate bridging ligands

A series of neutral oxamato‐bridged heterobimetallic chains of general formula [MCu(L^x)₂(S)₂] ? p S ? q H₂O [p=0–1, q=0–2.5; L¹=N‐2,6‐dimethylphenyloxamate, S=DMF with M=Mn ( 1 a ) and Co ( 1 b ); L²=N‐2,6‐diethylphenyloxamate, S=DMF with M=Mn ( 2 a ) and Co ( 2 b ) or S=DMSO with M=Mn ( 2 c ) and Co ( 2 d ); L³=N‐2,6‐diisopropylphenyloxamate, S=DMF with M=Mn ( 3 a ) and Co ( 3 b ) or S=DMSO with M=Mn ( 3 c ) and Co ( 3 d )] were prepared by treating the corresponding anionic oxamatocopper(II) complexes [Cu(L^x)₂]^2? (x=1–3) with M²⁺ cations (M=Mn and Co) in DMF or DMSO as the solvent. The single‐crystal X‐ray structures of 2 a and 3 a reveal the occurrence of well‐isolated, zigzag, oxamato‐bridged manganese(II)–copper(II) chains. The intrachain Cu ??? Mn distances across the oxamato bridge are 5.3761(7) and 5.4002(17) Å for 2 a and 3 a , respectively, whereas the shortest interchain Mn ??? Mn distances are 9.4475(16) and 8.1649(14) Å for 2 a and 3 a , respectively. All of these M^IICu^II chains (M=Mn and Co) exhibit 1D ferrimagnetic behaviour with moderately strong intrachain antiferromagnetic coupling between the square‐planar Cu^II and octahedral high‐spin M^II ions across the oxamato bridge [?J=31.4–35.2 and 33.4–44.8 cm^?1, respectively; H =∑_i?J S _M,i( S _Cu,i+ S _Cu,i?1)]. Only the Co^IICu^II chains show slow magnetic relaxation effects characteristic of single‐chain magnets (SCMs). Analysis of the magnetic relaxation dynamics of 3 d shows a thermally activated mechanism (Arrhenius law dependence) with values of the pre‐exponential factor (τ₀=2.6×10^?9 s) and activation energy (E_a=7.7 cm^?1) that are typical of SCMs. In contrast, two relaxation regimes are observed for 2 d in different temperature regions (τ₀=3.2×10^?10 s and E_a=24.7 cm^?1 for T<4.5 K and τ₀=3.2×10^?14 s and E_a=37.5 cm^?1 for T>4.5 K).     

Robust SnO2−x Nanoparticle‐Impregnated Carbon Nanofibers with Outstanding Electrochemical Performance for Advanced Sodium‐Ion Batteries

The sluggish sodium reaction kinetics, unstable Sn/Na₂O interface, and large volume expansion are major obstacles that impede practical applications of SnO₂‐based electrodes for sodium‐ion batteries (SIBs). Herein, we report the crafting of homogeneously confined oxygen‐vacancy‐containing SnO_2?x nanoparticles with well‐defined void space in porous carbon nanofibers (denoted SnO_2?x/C composites) that address the issues noted above for advanced SIBs. Notably, SnO_2?x/C composites can be readily exploited as the working electrode, without need for binders and conductive additives. In contrast to past work, SnO_2?x/C composites‐based SIBs show remarkable electrochemical performance, offering high reversible capacity, ultralong cyclic stability, and excellent rate capability. A discharge capacity of 565 mAh g^?1 at 1 A g^?1 is retained after 2000 cycles.     

Hydrogen Peroxide Biosensor Based on Immobilization of Hemoglobin on Au@Ag Nanoparticles Modified Carbon Ionic Liquid Electrode

A hydrogen peroxide (H₂O₂) biosensor based on the combination of Au@Ag core‐shell nanoparticles with a hemoglobin‐chitosan‐1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate (Hb‐CHIT‐BMIM×BF₄) composite film was prepared. UV‐vis spectroscopy and transmission electron microscopy confirmed a core‐shell nanostructure of Au@Ag nanoparticle was successfully obtained. Cyclic voltammetric results showed a pair of well‐defined redox peaks appeared with the formal potential (E^O′) of ‐0.301 V (versus Ag/AgCl reference electrode) and the peak‐to‐peak separation (ΔE_p) was 84 mV in 0.1 M phosphate buffer solutions. Due to the synergetic effect of Au@Ag core‐shell nanoparticles and Hb‐CHIT‐BMIM×BF₄, the biosensor exhibited good electrocatalytic activity to the reduction of H₂O₂ in a linear range from 1.0 × 10^?6 to 1.0 × 10^?3 M with a detection limit of 4 × 10^?7 M (S/N = 3). The apparent Michaelis‐Menten constant (K_M) was estimated to be 4.4 × 10^?4 M, showing its high affinity. Thus, the study proved that the combination of Au@Ag core‐shell nanoparticles and Hb‐CHIT‐BMIM×BF₄ is able to open up new opportunities for the design of enzymatic biosensors.     

Preparation,characterization, and evaluation of LiNi0.4Co0.6O2 nanofibers for supercapacitor applications

We prepared LiNi_0.4Co_0.6O₂ nanofibers by electrospinning at the calcination temperature of 450 °C for 6 h. The prepared LiNi_0.4Co_0.6O₂ nanofibers was characterized by thermal, X-ray diffraction, and Fourier transform infrared (FTIR) studies. The morphology of LiNi_0.4Co_0.6O₂ nanofibers was characterized by scanning electron microscopy studies. The asymmetric supercapacitor was fabricated using LiNi_0.4Co_0.6O₂ nanofibers as positive electrode and activated carbon (AC) as negative electrode and a porous polypropylene separator in 1 M LiPF₆–ethylene carbonate/dimethyl carbonate (LiPF₆–EC:DMC) (1:1?v/v) as electrolyte. Cyclic voltammetry studies were then carried out in the potential range of 0 to 3.0 V at different scan rates which exhibited the highest specific capacitance of 72.9 F g^?1. The electrochemical impedance measurements were carried out to find the charge transfer resistance and specific capacitance of the cell, and they were found to be 5.05 Ω and 67.4 F g^?1, respectively. Finally, the charge–discharge studies were carried out at a current density of 1 mA cm^?2 to find out the discharge-specific capacitance, energy density, and power density of the capacitor cell, and they were found to be 70.9 F g^?1, 180.2 Wh kg^?1, and 248.0 W kg^?1, respectively.     

Formation of NixCo3−xS4 Hollow Nanoprisms with Enhanced Pseudocapacitive Properties

Hollow nanostructures are of great interest for a wide variety of applications. Despite the great advances, synthesis of anisotropic hollow structures is still very challenging. In this work, we have developed a simple sacrificial template method to synthesize uniform Ni_xCo_3?xS₄ hollow nanoprisms with tunable composition. Tetragonal nanoprisms of nickel–cobalt acetate hydroxide precursors with controllable Ni/Co molar ratios are first synthesized and used as the sacrificial templates. After a sulfidation process with thioacetamide (TAA) in ethanol, the solid precursor prisms can be transformed into the corresponding Ni_xCo_3?xS₄ hollow nanoprisms with a well‐defined hollow interior. The intriguing structural and compositional features are beneficial for electrochemical applications. Impressively, the resultant Ni_xCo_3?xS₄ hollow prisms manifest a high specific capacitance with enhanced cycling stability, making them potential electrode materials for supercapacitors.     

Bimetal‐organic Framework‐derived Co9S8/ZnS@NC Heterostructures for Superior Lithium‐ion Storage

Heterostructure engineering of electrode materials, which is expected to accelerate the ion/electron transport rates driven by a built‐in internal electric field at the heterointerface, offers unprecedented promise in improving their cycling stability and rate performance. Herein, carbon nanotubes with Co₉S₈/ZnS heterostructures embedded in a N‐doped carbon framework (Co₉S₈/ZnS@NC) have been rationally designed via an in‐situ vapor chemical transformation strategy with the aid of thiophene, which not only acted as carbon source for the growth of carbon nanotubes but also as sulfur source for the sulfurization of metal Zn and Co. Density functional theory (DFT) calculation shows an about 3.24 eV electrostatic potential difference between ZnS and Co₉S₈, which results in a strong electrostatic field across the interface that makes electrons transfer from Co₉S₈ to the ZnS side. As expected, a stable cycling performance with reversible capacity of 411.2 mAh g^?1 at 1000 mA g^?1 after 300 cycles, excellent rate capability (324 mAh g^?1 at 2000 A g^?1) and a high percentage of pseudocapacitance contribution (87.5% at 2.2 mv/s) for lithium‐ion batteries (LIBs) are achieved. This work provides a possible strategy for designing multicomponent heterostructural materials for application in energy storage and conversion fields.     

Route to a family of robust, non-interpenetrated metal-organic frameworks with pto-like topology

A combination of topological rules and quantum chemical calculations has facilitated the development of a rational metal–organic framework (MOF) synthetic strategy using the tritopic benzene‐1,3,5‐tribenzoate (btb) linker and a neutral cross‐linker 4,4′‐bipyridine (bipy). A series of new compounds, namely [M₂(bipy)]₃(btb)₄ (DUT‐23(M), M=Zn, Co, Cu, Ni), [Cu₂(bisqui)_0.5]₃(btb)₄ (DUT‐24, bisqui=diethyl (R,S)‐4,4′‐biquinoline‐3,3′‐dicarboxylate), [Cu₂(py)_1.5(H₂O)_0.5]₃(btb)₄ (DUT‐33, py=pyridine), and [Cu₂(H₂O)₂]₃(btb)₄ (DUT‐34), with high specific surface areas and pore volumes (up to 2.03 m³ g^?1 for DUT‐23(Co)) were synthesized. For DUT‐23(Co), excess storage capacities were determined for methane (268 mg g^?1 at 100 bar and 298 K), hydrogen (74 mg g^?1 at 40 bar and 77 K), and n‐butane (99 mg g^?1at 293 K). DUT‐34 is a non‐cross‐linked version of DUT‐23 (non‐interpenetrated pendant to MOF‐14) that possesses open metal sites and can therefore be used as a catalyst. The accessibility of the pores in DUT‐34 to potential substrate molecules was proven by liquid phase adsorption. By exchanging the N,N donor 4,4′‐bipyridine with a substituted racemic biquinoline, DUT‐24 was obtained. This opens a route to the synthesis of a chiral compound, which could be interesting for enantioselective separation.