π‐Conjugated Microporous Polymer Films: Designed Synthesis,Conducting Properties,and Photoenergy Conversions

Conjugated microporous polymers are a unique class of polymers that combine extended π‐conjugation with inherent porosity. However, these polymers are synthesized through solution‐phase reactions to yield insoluble and unprocessable solids, which preclude not only the evaluation of their conducting properties but also the fabrication of thin films for device implementation. Here, we report a strategy for the synthesis of thin films of π‐conjugated microporous polymers by designing thiophene‐based electropolymerization at the solution–electrode interface. High‐quality films are prepared on a large area of various electrodes, the film thickness is controllable, and the films are used for device fabrication. These films are outstanding hole conductors and, upon incorporation of fullerenes into the pores, function as highly efficient photoactive layers for energy conversions. Our film strategy may boost the applications in photocatalysis, energy storage, and optoelectronics.     

Light‐Induced Solubility Modulation of Polyfluorene To Enhance the Performance of OLEDs

Liquid‐phase processing is a key prerequisite for the cost‐efficient fabrication of organic electronic devices. We report an approach for light‐induced modulation of the solubility of π‐conjugated polymers (polyfluorene) with side chains functionalized with hydroxycinnamic acid. Irradiation with light cleaves the solubilizing side chains and renders the thin films of the polyfluorene insoluble. In a proof of concept device, polyfluorenes were applied as emissive layers in OLEDs. Photoirradiation of the emission layer leads to an increase in OLED performance combined with a modulation of the solubility of the thin film. These results offer the possibility for further development in terms of manipulating the solubility and emissive parameters of an important class of functional materials.     

A Soluble Dynamic Complex Strategy for the Solution‐Processed Fabrication of Organic Thin‐Film Transistors of a Boron‐Containing Polycyclic Aromatic Hydrocarbon

The solution‐processed fabrication of thin films of organic semiconductors enables the production of cost‐effective, large‐area organic electronic devices under mild conditions. The formation/dissociation of a dynamic B?N coordination bond can be used for the solution‐processed fabrication of semiconducting films of polycyclic aromatic hydrocarbon (PAH) materials. The poor solubility of a boron‐containing PAH in chloroform, toluene, and chlorobenzene was significantly improved by addition of minor amounts (1 wt % of solvent) of pyridine derivatives, as their coordination to the boron atom suppresses the inherent propensity of the PAHs to form π‐stacks. Spin‐coating solutions of the thus formed Lewis acid–base complexes resulted in the formation of amorphous thin films, which could be converted into polycrystalline films of the boron‐containing PAH upon thermal annealing. Organic thin‐film transistors prepared by this solution process displayed typical p‐type characteristics.     

Synthesis and properties of through‐space conjugated polymers based on π–π stacked 1,3‐biarylpropane tethering units

Novel skipped‐π polymers in which the π‐components are connected with 2‐substituted trimethylene tethering units exhibit bathochromically shifted, broadened ultraviolet absorption with a unique lower‐energy absorption band and a largely red‐shifted fluorescent emission. These results suggest that through‐space π–π interactions owing to a stair‐like stacking substructure in these polymers extend the π‐conjugation of the components in the ground and excited states. As the photophysical properties of the polymers observed both in a solution and in a dried film are similar to those of the J‐aggregates of π‐molecules, these polymers may be considered as pseudo J‐stacking (or J‐like‐stacking) polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3412–3419     

Novel Conjugated Polymers Based on Dithieno[3,2‐b:6,7‐b]carbazole for Solution Processed Thin‐Film Transistors

Two conjugated polymers (CPs) P‐tCzC12 and P‐tCzC16 comprising alternating dithieno[3,2‐b:6,7‐b]carbazole and 4,4′‐dihexadecyl‐2,2′‐bithiophene units have been designed and synthesized. Upon thermal annealing, they can form ordered thin films in which the polymer backbones dominantly adopted an edge‐on orientation respective to the substrate with a lamellar spacing of ≈24 Å and a π‐stacking distance of ≈3.7 Å. Organic thin‐film transistors (OTFTs) were fabricated by solution casting. A hole mobility of 0.39 cm² V⁻¹s⁻¹ has been demonstrated with P‐tCzC16. This value is the highest among the CPs containing heteroacenes larger than 4 rings.     

Free‐Standing Gold‐Nanoparticle Monolayer Film Fabricated by Protein Self‐Assembly of α‐Synuclein

Free‐standing nanoparticle films are of great importance for developing future nano‐electronic devices. We introduce a protein‐based fabrication strategy of free‐standing nanoparticle monolayer films. α‐Synuclein, an amyloidogenic protein, was utilized to yield a tightly packed gold‐nanoparticle monolayer film interconnected by protein β‐sheet interactions. Owing to the stable protein–protein interaction, the film was successfully expanded to a 4‐inch diameter sheet, which has not been achieved with any other free‐standing nanoparticle monolayers. The film was flexible in solution, so it formed a conformal contact, surrounding even microspheres. Additionally, the monolayer film was readily patterned at micrometer‐scale and thus unprecedented double‐component nanoparticle films were fabricated. Therefore, the free‐floating gold‐nanoparticle monolayer sheets with these properties could make the film useful for the development of bio‐integrated nano‐devices and high‐performance sensors.     

Alternated π‐conjugated polymers based on a 1,2‐diiminocyclohexane chiral unit for nitroaromatics sensing

The detection of 2,4‐dinitrotoluene (DNT) by fluorescence quenching of a new class of polyimines consisting in π‐conjugated segments regularly alternated with chiral C₂ symmetry units has been studied for solutions and thin films. Their photophysical properties and their sensitivity towards DNT detection has been compared to those of a small model molecule incorporating the same π‐conjugated segment. In solution, all the compounds exhibit the same photo‐physical properties and sensitivity towards DNT detection. In contrast, for thin films, better performances are observed in static conditions for this new class of polyimines compared to the small model molecule. It seems that C₂ symmetry units prevent from the stacking of the π‐conjugated segments and provide in addition to high fluorescence signal an improved diffusion of the analyte inside the films. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4141–4149, 2009     

Bigger and Brighter Fluorenes: Facile π‐Expansion,Brilliant Emission and Sensing of Nitroaromatics

π‐Expanded butterfly‐like 2D fluorenes and 3D spirobifluorenes 1 – 5 were synthesized via a DDQ‐mediated oxidative cyclization strategy with a high regioselectivity. Through structural modification via π‐expansion, it was possible to achieve near‐ultraviolet absorption, bright‐blue emission, very high near‐unity fluorescence quantum yields in solution as well as in film states, and deep‐lying HOMO energy levels with excellent thermal stabilities. Furthermore, these electron‐rich compounds displayed a notable behavior towards sensing of nitroaromatic explosives, such as picric acid, up to a detection limit of 0.2 ppb.     

Random copolymers based on 3‐hexylthiophene and benzothiadiazole with induced π‐conjugation length and enhanced open‐circuit voltage property for organic photovoltaics

A series of donor‐acceptor low‐bandgap conjugated polymers, that is, HThmBT (m = 3, 6, 9, 12, 15), composed of regioregular 3‐hexylthiophene segments and 2,1,3‐benzothiadiazole units, were synthesized through the Stille coupling polymerization to optimize the π‐conjugation length of the polymer and the intramolecular charge transfer (ICT) effect in the polymer backbone. The polymers had relatively low optical bandgaps ranging from 1.6 to 1.72 eV. Among these polymers, HTh6BT exhibited the best device performance with a power conversion efficiency (PCE) of 1.6%. Moreover, despite being based on thiophene, HTh6BT exhibited a high‐open circuit voltage (V_OC) of over 0.8 V because of its low high occupied molecular orbital (HOMO) energy level. These results provided an effective strategy for designing and synthesizing low‐bandgap conjugated polymers with broad absorption ranges and well‐balanced energy levels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

漆酚醛胺聚合物多孔膜的制备

以漆酚醛胺聚合物(UFDP)为成膜材料,利用水辅助自组装的固体基板展开法和水面展开法制备了漆酚醛胺聚合物多孔膜.研究了在静态(即不在聚合物表面吹扫氮气)高湿度环境下聚合物溶液浓度、环境湿度和固体基板等因素对多孔膜形貌的影响.结果表明,水面展开法更有利于形成单层的多孔膜而固体基板展开法得到的是多层的多孔膜.当UFDP聚合物浓度为6.0 mg/mL,环境相对湿度为90%时,用水面展开法制得的单层多孔膜的孔径分布较均匀.     

Deep‐red emissive conjugated poly(2,6‐BODIPY‐ethynylene)s bearing alkyl side chains

Novel deep‐red emissive poly(2,6‐BODIPY‐ethynylene)s bearing dodecyl side chains (polymers A , B , and C ) have been prepared by palladium‐catalyzed Sonogashira polymerization of 2,6‐diiodo‐functionalized BODIPY monomers with 2,6‐diethynyl‐functionalized BODIPY monomers. These polymers emit in the deep‐red region with emission maxima at up to 690 nm, and exhibit significant red shifts (up to 166 and 179 nm) of both absorption and emission maxima compared with their parent BODIPY dyes due to significant extension of π‐conjugation. These polymers possess good thermal stability with decomposition temperature between 270 and 360 °C. The polymers exhibit a little larger Stokes shifts and shorter lifetime than their corresponding BODIPY dyes. The solid state thin films of polymers A , B , and C emit in near‐infrared region between 723 and 743 nm, and show significantly red shifts (up to 57 nm) in absorption and emission maxima relative to their polymer solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5354–5366, 2009     

A π‐stacked and conjugated hybrid based on poly(N‐vinylcarbazole) postfunctionalized with terfluorene for stable deep‐blue hole‐transporting materials

The combination of π‐stacked with π‐conjugated building blocks offers an essential strategy to construct multifunctional organic semiconductors (MOSs) with the unique optoelectrical properties. Covalent hybrids can efficiently avoid the intrinsic phase‐separation defects in corresponding blend system. In this contribution, poly(vinylcarbazole) tethered with terfluorene, PVK‐TF, as a double‐channeled π‐stacked and π‐conjugated hybrid (SCH), has been constructed via Friedal‐Crafts click postmodification (FCCP). The chemical structure and optoelectrical property were determined by GPC, UV–vis, PL, TGA, DSC, and CV. Its PL spectra in the annealing thin film at N₂ atmosphere without low‐energy emission bands centered at the 530 nm indicates that no π‐stacks between carbazole and TF or among TFs dominate the whole condensed phase, which is in agreement with the intrachain T‐shaped π‐pitched motifs in molecular modeling simulation due to steric hindrance effect in complicated diarylfluorenes (CDAFs). A supporting prototype stable deep‐blue PLED was successfully obtained with an Internationale de l'Eclairage (CIE) coordinates of (0.20, 0.10) and a width at half maximum (FWHM) of about 60 nm at high current density of 100 mA/cm² (35 V). Deep‐blue PVK‐TF is a promising MOS for hole‐transporting and host materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5221–5229, 2009     

N‐Alkylacylamides in Thin Films Display Infrared Spectra of 310‐, α‐, and π‐Helices with Visible Static and Dynamic Growth Phases

A peptide model is a physical system containing a CONH group, the simplest being HCONHCH₃, N‐methylformamide (NMF). We have discovered that NMF and N‐methylacetamide (NMA), which form hydrogen‐bonded oligomers in thin films on a planar AgX fiber, display infrared (IR) spectra with peaks like those of polypeptide helices. Structures can be assigned by their amide I maxima near 1672 (3₁₀), 1655 (3₁₀), 1653 (α), 1655 (π), and 1635 cm^?1 (π), which are the first IR data for the π‐helix. Sharp peaks are an outcome of immobilization of polar species on the polar surface of silver halides. We report the first use of expanded thin‐film IR spectroscopy, in which plots of every spectrum over the amide I–II range show pauses or slow stages in the increase or decrease of absorption. These are identified as static phases followed by dynamic phases, with the incremental gain or loss of a helix turn. A general theory can be stated for such processes. Density functional calculations show that the NMA α‐helix pentamer (crystal structure geometry) is transformed into a π‐helix‐like form. For the first time, an entire sequence (3₁₀‐helix, α‐helix, π‐helix, quasiplanar species) of spectra has been recorded for NMA.     

Boron(III)‐Containing Donor–Acceptor Compound with Goldlike Reflective Behavior for Organic Resistive Memory Devices

A small‐molecule‐based boron(III)‐containing donor–acceptor compound has been designed and synthesized. Interesting goldlike reflective behavior was observed in the neat thin‐film sample from simple spin‐coating preparation, which can serve as a potential organic thin‐film optical reflector. The small thickness in nanometer range and the relatively smooth surface morphology, together with simple preparation and easy solution processability, are attractive features for opening up new avenues for the fabrication of reflective coatings. Moreover, this donor–acceptor compound has been employed in the fabrication of organic resistive memory device, which exhibited good performance with low turn‐on voltage, small operating bias, large ON/OFF ratio, and long retention time.     

New photoluminescent conjugated polymers with 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP) and 1,4‐phenylene units in the main chain

A series of π‐conjugated polymers and copolymers containing 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (also known as 2,5‐dihydro‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐1,4‐dione) (DPP) and 1,4‐phenylene units in the main chain is described. The polymers are synthesised using the palladium‐catalysed aryl‐aryl coupling reaction (Suzuki coupling) of 2,5‐dihexylbenzene‐1,4‐diboronic acid with 1,4‐dioxo‐2,5‐dihexyl‐3,6‐di(4‐bromophenyl)pyrrolo[3,4‐c]pyrrole and 1,4‐dibromo‐2,5‐dihexylbenzene in different molar ratios. Soluble hairy rod‐type polymers with molecular weights up to 21 000 are obtained. Polymer solutions in common organic solvents such as chloroform or xylene are of orange colour (λ_max = 488 nm) and show strong photoluminescence (λ_max = 544 nm). The photochemical stability is found to be higher than for corresponding saturated polymers containing isolated DPP units in the main chain. Good solubility and processability into thin films render the compounds suitable for electronic applications.     

Synthesis of π‐conjugated network polymers based on fluoroarene and fluorescent units via direct arylation polycondensation and their porosity and fluorescent properties

In this study, we report the synthesis of π‐conjugated network polymers including unique fluorescent units via palladium‐catalyzed direct (C? H) arylation polycondensation of 1,2,4,5‐tetrafluorobenzene with tetrabromoarenes. The obtained polymers, including tetraphenylethene (TPE) or pyrene (PYR) units, had microporous structures with the specific Brunauer–Emmett–Teller (BET) surface areas at 508 and 824 m² g^?1, respectively. These polymers possessed narrow pore distributions (<15 nm). These analyses supported that π‐conjugated microporous polymers (CMPs) were synthesized by the direct arylation. Similar to the result of BET surface areas, carbon capture capacity of CMP based on PYR unit was higher than that of CMP based on TPE unit. Because the nitrogen capture capacity of these CMPs was low (≈ 0), selectivity of carbon dioxide adsorption was very high. TPE is a typical aggregation‐induced emission unit but PYR is an aggregation‐caused quenching (ACQ) molecule. The incorporation of TPE unit into the microporous polymer gave green‐colored fluorescence (Φ = 0.12). The polymer including PYR units also showed the green‐colored fluorescence (Φ = 0.05) even though the ACQ property. These synthesized CMPs exhibited characteristic solvatofluorochromism. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3862–3867     

π‐Plasmon absorbance films of carboxylic functionalized CNTs coupled with renewable PGP platforms

π‐Plasmon absorbance films of carboxylic functionalized multiwall carbon nanotubes (CNTs) coupled with renewable and recycled polycaprolactone grafted pectin (PGP) platforms as successful alternative for ordinary nondegradable platforms were investigated. Characterization of the synthesized carboxylic functionalized CNTs was performed using ¹H NMR and attenuated total reflectance Fourier transform infrared for structural identification, thermogravimetric analysis and derivative thermogravimetric analysis for thermal stability, and X‐ray powder diffraction for crystal structure, whereas the characterization of prepared PGP was done by means of attenuated total reflectance Fourier transform infrared for chemical structure, differential scanning calorimetry for melting endotherms of polycaprolactone and high crystalline structure of PGP, and thermogravimetric analysis and derivative thermogravimetric analysis for thermal stability of PGP. Fabrication of water‐dispersed carboxylic functionalized CNTs coupled with PGP films was performed by casting technique in the presence of Ca²⁺ as cross‐linker. The thin films were tested for π‐plasmon absorbance using UV‐Vis spectrometry. Different fractions of carboxylic functionalized CNTs and PGP films demonstrated π‐plasmon absorbance broad peaks at λ_max = 232 nm, which corresponded to 5.36 eV. The fabrication of novel films from renewable recycled PGP platform and advanced carboxylic functionalized CNTs properties will be the key features for many of next forthcoming technologies. The PGP considered as environment‐friendly and easily degradable platforms will be a successful alternative for conventional nondegradable electronic platforms, and water‐dispersed carboxylic functionalized CNTs with advanced properties will be finding accelerating executive applications.     

Enhanced Performance of Solution‐Processed TESPE‐ADT Thin‐Film Transistors

A solution‐processed anthradithiophene derivative, 5,11‐bis(4‐triethylsilylphenylethynyl)anthradithiophene (TESPE‐ADT), is studied for use as the semiconducting material in thin‐film transistors (TFTs). To enhance the electrical performance of the devices, two different kinds of solution processing (spin‐coating and drop‐casting) on various gate dielectrics as well as additional post‐treatment are employed on thin films of TESPE‐ADT, and p‐channel OTFT transport with hole mobilities as high as ～0.12 cm² V^?1 s^?1 are achieved. The film morphologies and formed microstructures of the semiconductor films are characterized in terms of film processing conditions and are correlated with variations in device performance.     

The Effect of –(C6F4)– on the Surface Free Energy of Main‐Chain Liquid Crystalline and Crystalline Polymers

Novel fluorinated main‐chain liquid‐crystalline/crystalline polymers were prepared through thin film polymerization to investigate the effect of –(C₆F₄)– on the surface free energy. The fluorine in the phenyl rings does not lower the total surface free energy of the thin copolymer films, compared to those without fluorine. Interestingly, the Lewis acid components (γ⁺) of the surface free energy of the fluorine‐containing polymers increase with an increase in the –(C₆F₄)– content, indicating the increasing electron accepting character of the surface.     

Correlation of Molecular Assembly and Interactions in Crystals and Langmuir–Blodgett Films of N‐(2,4‐dinitrophenyl)‐n‐octadecylamine

Correlation of molecular organization in crystals and in ultrathin films is of fundamental interest in the design of molecular materials based on thin films. We have chosen as a test case, N‐(2,4‐dinitrophenyl)‐n‐octadecylamine (DNPOA), a potential candidate for the fabrication of Langmuir–Blodgett (LB) films for quadratic nonlinear optical applications. Like several other 4‐nitroaniline derivatives, DNPOA does not form stable monolayers at the air–water interface. This has precluded investigations of their organization in LB films. We have stabilized composite Langmuir films of DNPOA with the phospholipid molecule DSPC and fabricated their LB films. Successful growth of single crystals of DNPOA allowed structure determination and detailed analysis of molecular associations in the solid state. Electronic absorption spectra of DNPOA in solution, in the solid state and in the LB film are investigated. Modeling of the various spectral signatures by semiempirical computations on molecular clusters extracted from the crystal lattice provides insight into the correlation between the molecular organization in crystals and in LB films.