Dihydrogen trioxide clusters, (HOOOH)n (n = 2-4), and the hydrogen-bonded complexes of HOOOH with acetone and dimethyl ether: implications for the decomposition of HOOOH

Hydrogen-bonded gas-phase molecular clusters of dihydrogen trioxide (HOOOH) have been investigated using DFT (B3LYP/6-311++G(3df,3pd)) and MP2/6-311++G(3df,3pd) methods. The binding energies, vibrational frequencies, and dipole moments for the various dimer, trimer, and tetramer structures, in which HOOOH acts as a proton donor as well as an acceptor, are reported. The stronger binding interaction in the HOOOH dimer, as compared to that in the analogous cyclic structure of the HOOH dimer, indicates that dihydrogen trioxide is a stronger acid than hydrogen peroxide. A new decomposition pathway for HOOOH was explored. Decomposition occurs via an eight-membered ring transition state for the intermolecular (slightly asynchronous) transfer of two protons between the HOOOH molecules, which form a cyclic dimer, to produce water and singlet oxygen (Delta (1)O 2). This autocatalytic decomposition appears to explain a relatively fast decomposition (Delta H a(298K) = 19.9 kcal/mol, B3LYP/6-311+G(d,p)) of HOOOH in nonpolar (inert) solvents, which might even compete with the water-assisted decomposition of this simplest of polyoxides (Delta H a(298K) = 18.8 kcal/mol for (H 2O) 2-assisted decomposition) in more polar solvents. The formation of relatively strongly hydrogen-bonded complexes between HOOOH and organic oxygen bases, HOOOH-B (B = acetone and dimethyl ether), strongly retards the decomposition in these bases as solvents, most likely by preventing such a proton transfer.     

Mechanism of formation of hydrogen trioxide (HOOOH) in the ozonation of 1,2-diphenylhydrazine and 1,2-dimethylhydrazine: an experimental and theoretical investigation

Low-temperature (-78 degrees C) ozonation of 1,2-diphenylhydrazine in various oxygen bases as solvents (acetone-d(6), methyl acetate, tert-butyl methyl ether) produced hydrogen trioxide (HOOOH), 1,2-diphenyldiazene, 1,2-diphenyldiazene-N-oxide, and hydrogen peroxide. Ozonation of 1,2-dimethylhydrazine produced besides HOOOH, 1,2-dimethyldiazene, 1,2-dimethyldiazene-N-oxide and hydrogen peroxide, also formic acid and nitromethane. Kinetic and activation parameters for the decomposition of the HOOOH produced in this way, and identified by (1)H, (2)H, and (17)O NMR spectroscopy, are in agreement with our previous proposal that water participates in this reaction as a bifunctional catalyst in a polar decomposition process to produce water and singlet oxygen (O(2), (1)delta(g)). The possibility that hydrogen peroxide is, besides water, also involved in the decomposition of hydrogen trioxide is also considered. The half-life of HOOOH at room temperature (20 degrees C) is 16 +/- 1 min in all solvents investigated. Using a variety of DFT methods (restricted, broken-symmetry unrestricted, self-interaction corrected) in connection with the B3LYP functional, a stepwise mechanism involving the hydrotrioxyl (HOOO(*)) radical is proposed for the ozonation of hydrazines (RNHNHR, R = H, Ph, Me) that involves the abstraction of the N-hydrogen atom by ozone to form a radical pair, RNNHR(*) (*)OOOH. The hydrotrioxyl radical can then either abstract the remaining N(H) hydrogen atom from the RNNHR(*) radical to form the corresponding diazene (RN=NR), or recombines with RNNHR(*) in a solvent cage to form the hydrotrioxide, RN(OOOH)NHR. The decomposition of these very labile hydrotrioxides involves the homolytic scission of the RO-OOH bond with subsequent "in cage" formation of the diazene-N-oxide and hydrogen peroxide. Although 1,2-diphenyldiazene is unreactive toward ozone under conditions investigated, 1,2-dimethyldiazene reacts with relative ease to yield 1,2-dimethyldiazene-N-oxide and singlet oxygen (O(2), (1)delta(g)). The subsequent reaction sequence between these two components to yield nitromethane as the final product is discussed. The formation of formic acid and nitromethane in the ozonolysis of 1,2-dimethylhydrazine is explained as being due to the abstraction of a methyl H atom of the CH(3)NNHCH(3)(*) radical by HOOO(*) in the solvent cage. The possible mechanism of the reaction of the initially formed formaldehyde methylhydrazone (and HOOOH) with ozone/oxygen mixtures to produce formic acid and nitromethane is also discussed.     

endo/exo isomerism in norcarane and 2-norcaranol hydrotrioxides (ROOOH)

Ozonation of norcarane (1) yielded endo and exo norcarane hydrotrioxides (2a, 2b), as characterized by (1)H and (13)C NMR spectroscopy. Further ozonation of the primary decomposition products of these hydrotrioxides, i.e., 2-norcaranols (3), produced the corresponding isomeric 2-norcaranol hydrotrioxides (4a, 4b), and hydrogen trioxide (HOOOH).     

Evidence for HOOO radicals in the formation of alkyl hydrotrioxides (ROOOH) and hydrogen trioxide (HOOOH) in the ozonation of C-H bonds in hydrocarbons.

Low-temperature ozonation of cumene (1a) in acetone, methyl acetate, and tert-butyl methyl ether at -70 degrees C produced the corresponding hydrotrioxide, C(6)H(5)C(CH(3))(2)OOOH (2a), along with hydrogen trioxide, HOOOH. Ozonation of triphenylmethane (1b), however, produced only triphenylmethyl hydrotrioxide, (C(6)H(5))(3)COOOH (2b). These observations, together with the previously reported experimental evidence, seem to support the "radical" mechanism for the first step of the ozonation of the C-H bonds in hydrocarbons, i.e., the formation of the caged radical pair (R(**)OOOH), which allows both (a) collapse of the radical pair to ROOOH and (b) the abstraction of the hydrogen atom from alkyl radical R(*) by HOOO(*) to form HOOOH. The B3LYP/6-311++G(d,p) (ZPE) calculations revealed that HOOO radicals are considerably stabilized by forming intermolecularly hydrogen-bonded complexes with acetone (BE = 8.55 kcal/mol) and dimethyl ether (7.04 kcal/mol). This type of interaction appears to be crucial for the relatively fast reactions (and the formation of the polyoxides in relatively high yields) in these solvents, as compared to the ozonations run in nonbasic solvents. However, HOOO radicals appear to be not stable enough to abstract hydrogen atoms outside the solvent cage, as indicated by the absence of HOOOH among the products in the ozonolysis of triphenylmethane. The decomposition of alkyl hydrotrioxides 2a and 2b involves a homolytic cleavage of the RO-OOH bond with subsequent "in cage" reactions of the corresponding radicals, while the decomposition of HOOOH is most likely predominantly a "pericyclic" process involving one or more molecules of water acting as a bifunctional catalyst to produce water and singlet oxygen (Delta(1)O(2)).     

The rotational spectrum and structure of HOOOH

Dihydrogen trioxide, HOOOH, which is a species with fundamental importance for understanding the chain formation ability of the oxygen atom, was detected in a supersonic jet by a Fourier transform microwave spectrometer with a pulsed discharge nozzle, together with double resonance and triple resonance techniques. Its precise molecular structure was determined from the experimentally determined rotational constants of HOOOH and its isotopomer, DOOOD. Many of the microwave and millimeter wave transitions can now be accurately predicted, which could be facilitated for remote sensing of the molecule to elucidate its roles in various chemical processes.     

The ozonation of silanes and germanes: an experimental and theoretical investigation

Ozonation of various silanes and germanes produced the corresponding hydrotrioxides, R3SiOOOH and R3GeOOOH, which were characterized by 1H, 13C, 17O, and 29Si NMR, and by infrared spectroscopy in a two-pronged approach based on measured and calculated data. Ozone reacts with the E-H (E = Si, Ge) bond via a concerted 1,3-dipolar insertion mechanism, where, depending on the substituents and the environment (e.g., acetone-d6 solution), the H atom transfer precedes more and more E-O bond formation. The hydrotrioxides decompose in various solvents into the corresponding silanols/germanols, disiloxanes/digermoxanes, singlet oxygen (O2(1delta(g))), and dihydrogen trioxide (HOOOH), where catalytic amounts of water play an important role as is indicated by quantum chemical calculations. The formation of HOOOH as a decomposition product of organometallic hydrotrioxides in acetone-d6 represents a new and convenient method for the preparation of this simple, biochemically important polyoxide. By solvent variation, singlet oxygen (O2(1delta(g))) can be generated in high yield.     

An efficient methyltrioxorhenium(VII)-catalyzed transformation of hydrotrioxides (ROOOH) into dihydrogen trioxide (HOOOH)

Dihydrogen trioxide (HOOOH) is formed nearly quantitatively in the low-temperature (-70 degrees C) methyltrioxorhenium(VII) (MTO)-catalyzed transformation of silyl hydrotrioxides (R3SiOOOH), and some acetal hydrotrioxides, in various solvents, as confirmed by 1H, and 17O NMR spectroscopy. The calculated energetics (B3LYP) for the catalytic cycle, using H3SiOOOH as a model system, is consistent with the experimentally observed activation energy (9.5 +/- 2.0 kcal/mol) and a small kinetic solvent isotope effect (kH2O/kD2O = 1.1 +/- 0.1), indicating an initial concerted reaction between the silyl hydrotrioxide and MTO in the rate-determining step. With the addition of water in the next step, the intermediate undergoes a sigma-bond metathesis reaction to break the Re-OOOH bond and form HOOOH, together with the second dihydroxy intermediate. The final step in the catalytic cycle involves a second, catalytic water that lowers the barrier to form H3SiOH and MTO.     

17O NMR spectroscopic characterization and the mechanism of formation of alkyl hydrotrioxides (ROOOH) and hydrogen trioxide (HOOOH) in the low-temperature ozonation of isopropyl alcohol and isopropyl methyl ether: water-assisted decomposition

Low-temperature ozonation of isopropyl alcohol (1a) and isopropyl methyl ether (1b) in [D6]acetone, methyl acetate, and tert-butyl methyl ether at -78 degrees C produced the corresponding hydrotrioxides, Me2C(OH)(OOOH) (2a) and Me2C(OMe)(OOOH) (2b), along with hydrogen trioxide (HOOOH). All the polyoxides investigated were characterized for the first time by 17O NMR spectroscopy of highly 17O-enriched species. The assignment was confirmed by GIAO/MP2/6-31++G* calculations of 17O NMR chemical shifts, which were in excellent agreement with the experimental values. Ab initio density functional (DFT) calculations at the B3LYP/ 6-31G*+ZPE level have clarified the transition structure (TS1, deltaE = 7.4 and 10.6 kcalmol(-1), relative to isolated reactants and the complex 1a-ozone, respectively) for the ozonation of 1a: this, together with the formation of HOOOH and some other products, indicates the involvement of radical intermediates (R*, *OOOH) in the reaction. The activation parameters for the decomposition of the hydrotrioxides 2a and 2b (Ea, = 23.5+/-1.5 kcalmol(-1), logA = 16+/-1.8) were typical for a homolytic process in which cleavage of the ROOOH molecule occurs to yield a radical pair [RO* *OOH] and represents the lowest available energy pathway. Significantly the lower activation parameters for the decomposition of HOOOH (Ea = 16.5+/-2.2 kcalmol(-1), logA = 9.5+/-2.0) relative to those expected for the homolytic scission of the HO-OOH bond [bond dissociation energy (BDE) = 29.8 kcalmol(-1), CCSD(T)/6-311++G**] are in accord with the proposal that water behaves as a bifunctional catalyst and therefore participates in a "polar" (non-radical) decomposition process of this polyoxide. A relatively large acceleration of the decomposition of the hydrotrioxide 2a in [D6]acetone, accompanied by a significant lowering of the activation energies, was observed in the presence of a large excess of water. Thus intramolecular 1,3-proton transfer probably also involves the participation of water and is similar to the mechanism proposed for the decomposition of HOOOH. This hypothesis was further substantiated by the B3LYP/6-31++ G*+ZPE calculations for the participation of water in the decomposition of CH3OOOH, which revealed two stationary points on the potential energy surface corresponding to a CH3OOOH-HOH complex and a six-membered cyclic transition state TS2. The energy barriers were comparable with those calculated for HOOOH, that is, deltaE = 15.0 and 21.5 kcalmol(-1) relative to isolated reactants and the CH3OOOH-HOH complex, respectively.     

Solid sampling electrothermal atomic absorption spectrometry for analysis of high-purity tungsten trioxide and high-purity tungsten blue oxide

A solid sampling ETAAS method for the direct determination of Ca, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni and Zn in high-purity tungsten trioxide and tungsten blue oxide powders using a modern spectrometer with transversely heated graphite tube and a solid sampling system is described. The extremely high background caused by the vaporizing tungsten oxides could be eliminated by the reduction to tungsten metal using hydrogen as purge gas during pyrolysis. Quantification of all elements was performed using calibration curves measured with aqueous standard solutions. The analyte contents determined were between 0.033 (Cu) and 12.6 (Fe) μg/g for tungsten trioxide and between 0.001 (Co) and 0.5 (Na) μg/g for tungsten blue oxide. The accuracy was checked by comparing the results with those obtained by ETAAS in analysis of HF/HNO₃ sample digests and by other methods. Extremely low limits of detection being between 0.07 (Mg, Na, Zn) - 2 (Ni) and 0.01 (Mg, Na, Ni) - 1.7 (Fe) ng/g for tungsten trioxide and tungsten blue oxide, respectively, could be achieved due to almost complete freedom of blank and unusually high applicable sample amounts (5–15 mg for tungsten trioxide and 5–70 mg for tungsten blue oxide).     

Redox Chemistry of Molybdenum Trioxide for Ultrafast Hydrogen‐Ion Storage

Hydrogen ions are ideal charge carriers for rechargeable batteries due to their small ionic radius and wide availability. However, little attention has been paid to hydrogen‐ion storage devices because they generally deliver relatively low Coulombic efficiency as a result of the hydrogen evolution reaction that occurs in an aqueous electrolyte. Herein, we successfully demonstrate that hydrogen ions can be electrochemically stored in an inorganic molybdenum trioxide (MoO₃) electrode with high Coulombic efficiency and stability. The as‐obtained electrode exhibits ultrafast hydrogen‐ion storage properties with a specific capacity of 88 mA hg^?1 at an ultrahigh rate of 100 C. The redox reaction mechanism of the MoO₃ electrode in the hydrogen‐ion cell was investigated in detail. The results reveal a conversion reaction of the MoO₃ electrode into H_0.88MoO₃ during the first hydrogen‐ion insertion process and reversible intercalation/deintercalation of hydrogen ions between H_0.88MoO₃ and H_0.12MoO₃ during the following cycles. This study reveals new opportunities for the development of high‐power energy storage devices with lightweight elements.     

Hemiortho esters and hydrotrioxides as the primary products in the low-temperature ozonation of cyclic acetals: an experimental and theoretical investigation

Low-temperature ozonation (-78 degrees C) of 1,3-dioxolanes 1a-1f and 1,3-dioxanes 1g and h in acetone-d6, methyl acetate, and tert-butyl methyl ether produced both the corresponding hemiortho esters (2a-h, ROH) and acetal hydrotrioxides (3a-h, ROOOH) in molar ratios ROH/ROOOH ranging from 0.5 to 23. Both types of intermediates were fully characterized by 1H, 13C, and 17O NMR spectroscopy. DFT calculations suggest that ozone abstracts a hydride ion from 1 to form an ion pair, R+ -OOOH, which subsequently collapses to either the corresponding hemiortho ester (ROH) or the acetal hydrotrioxide (ROOOH). Hemiortho esters decomposed quantitatively into the corresponding hydroxy esters. Experimentally obtained activation parameters for the decomposition of 2a (E(a) = 13.5 +/- 1.0 kcal/mol, log A = 8.3 +/- 1.0) are in accord with a highly oriented transition state involving, according to B3LYP calculations (deltaH(a)(298) = 13.2 kcal/mol), two molecules of water as a bifunctional catalyst. This mechanism is also supported by the magnitude of the solvent isotope effect for the decomposition of 2e, i.e., k(H2O)/k(D2O) = 4.6 +/- 1.2. Besides the hydroxy esters and oxygen (3O2/1O2), dihydrogen trioxide (HOOOH) was formed in the decomposition of most of the acetal hydrotrioxides (ROOOH) investigated. The activation parameters for the decomposition of the hydrotrioxides 3a-e in various solvents were E(a) = 20 +/- 2 kcal/mol, log A = 13.5 +/- 1.5. Several mechanistic possibilities for the decomposition of ROOOH were tested by experiment and theory. The formation of the hydroxy esters and oxygen could be explained by the intramolecular transfer of the proton to form the hydroxy ester. The assistance of water in the decomposition of ROOOH to form the hydroxy esters, either directly or via hemiortho esters, was also investigated. According to DFT calculations, the formation of a hydroxy ester via hemiortho ester is energetically more favorable (deltaH(a)(298) = 14.5 kcal/mol), again due to the catalytic effect of two water molecules. HOOOH generation requires the involvement of water in the decomposition of ROOOH where the direct formation out of ROOOH is energetically preferred. The energy for a reaction between two molecules of water and singlet oxygen (delta1O2) is too high to occur in solution.     

High Phase‐Purity 1T‐MoS2 Ultrathin Nanosheets by a Spatially Confined Template

The crystal phase plays an important role in controlling the properties of a nanomaterial; however, it is a great challenge to obtain a nanomaterial with high purity of the metastable phase. For instance, the large‐scale synthesis of the metallic phase MoS₂ (1T‐MoS₂) is important for enhancing electrocatalytic reaction, but it can only be obtained under harsh conditions. Herein, a spatially confined template method is proposed to synthesize high phase‐purity MoS₂ with a 1T content of 83 %. Moreover, both the confined space and the structure of template will affect the purity of 1T‐MoS₂; in this case, this approach was extended to other similar spatially confined templates to obtain the high‐purity material. The obtained ultrathin nanosheets exhibit good electrocatalytic activity and excellent stability in the hydrogen evolution reaction.     

The Hydrogen Evolution Reaction in Alkaline Solution: From Theory,Single Crystal Models,to Practical Electrocatalysts

The hydrogen evolution reaction (HER) is a fundamental process in electrocatalysis and plays an important role in energy conversion for the development of hydrogen‐based energy sources. However, the considerably slow rate of the HER in alkaline conditions has hindered advances in water splitting techniques for high‐purity hydrogen production. Differing from well documented acidic HER, the mechanistic aspects of alkaline HER are yet to be settled. A critical appraisal of alkaline HER electrocatalysis is presented, with a special emphasis on the connection between fundamental surface electrochemistry on single‐crystal models and the derived molecular design principle for real‐world electrocatalysts. By presenting some typical examples across theoretical calculations, surface characterization, and electrochemical experiments, we try to address some key ongoing debates to deliver a better understanding of alkaline HER at the atomic level.     

Flame‐retardancy of a Cellulosic Fabric by the Application of Synergistic Effect between Ammonium Bromide and Antimony(III) Oxide

The synergistic effect between ammonium bromide and antimony(III) oxide as a nondurable finish on the flammability of 100% woven plain cotton fabric (with a density of 144 g/m2, the number of yarns 21 per 10 mm), has been investigated in this study. The laundered totally-dried, weighed specimens were impregnated with suitable concentration individual aqueous ammonium bromide and/or antimony(III) oxide suspension solutions and some sets were impregnated with appropriate admixed solutions of the both chemicals. A vertical flame spread test was then carried-out to characterize the flammability of the samples. An acceptable synergistic effect was then experienced by using an admixed bath containing 0.1 molar ammonium bromide and 0.05 unit formal antimony trioxide solutions for impartation of flame-retardancy to a cotton fabric. The optimum mass of the mixture required to impart flame-retardancy was about 3.64 g of anhydrous additives per 100 g of fabric. The results obtained are in favor of Wall Effect Theory. Moreover synergistic effect indicating dehydration of the treated substrate by using this combination via thermogravimetry could be deduced.     

Mechanistical studies on the formation of isotopomers of hydrogen peroxide (HOOH), hydrotrioxy (HOOO), and dihydrogentrioxide (HOOOH) in electron-irradiated H(2)(18)O/O(2) ice mixtures

In order to investigate the chemical reactions inside water-oxygen ice mixtures in extreme environments, and to confirm the proposed reaction mechanisms in pure water ice, we conducted a detailed infrared spectroscopy and mass spectrometry study on the electron irradiation of H(2)(18)O/O(2) ice mixtures. The formation of molecular hydrogen, isotopically substituted oxygen molecules (18)O(18)O and (16)O(18)O, ozone ((16)O(16)O(16)O, (16)O(16)O(18)O, and (16)O(18)O(16)O), hydrogen peroxide (H(18)O(18)OH, H(16)O(16)OH and H(16)O(18)OH), hydrotrioxy (HOOO), and dihydrogentrioxide (HOOOH) were detected. Kinetic models and reaction mechanisms are proposed to form these molecules in water and oxygen-rich solar system ices.     

Insights into Tris‐(2‐Hydroxylethyl)methylammonium Methylsulfate Aqueous Solutions

We report herein a combined experimental–computational study on tris‐(2‐hydroxylethyl)methylammonium methylsulfate in water solutions, as a representative ionic liquid of the aqueous‐solution behavior of hydroxylammonium‐based ionic liquids. Relevant thermophysical properties were measured as a function of mixture composition and temperature. Classical molecular dynamics simulations were performed to infer microscopic structural features. The reported results for ionic liquid in water‐rich solutions show that it behaves as isolated non‐interacting ions solvated by water molecules, through well‐defined solvation shells, exerting a disrupting effect on the water hydrogen bonding network. Nevertheless, as ionic liquid concentration increase, interionic association increases, even for diluted water solutions, evolving from the typical behavior of strong electrolytes in solution toward large interacting structures. For ionic‐liquid‐rich mixtures, water exerts a minor disrupting effect on the fluid’s structuring because it occupies regions around each ion (developing water–ion hydrogen bonds) but without significantly weakening anion–cation interactions.     

Vapor phase matrix extraction of high purity di-boron trioxide and trace analysis using electrothermal AAS

A method has been developed for the determination of Al, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Sb, Sn and Zn at trace levels in high purity di-boron trioxide using ETAAS. The boron trioxide matrix was eliminated as trimethyl borate ester in a multiplex vapor phase matrix extraction (MVPME) device using a mixture of glycerol and methanol. In this MVPME device, in situ reagent purification, sample digestion and simultaneous matrix elimination were achieved by a single step in closed condition, which in combined effect reduce the process blanks. The matrix extraction procedure allows determination of trace elemental impurities by electrothermal atomic absorption spectrometry (ETAAS) with fast furnace analysis (without an ashing step and modifier) and calibration against aqueous standards. The performance and accuracy of the vapor phase matrix elimination technique are compared to those of suprapur grade hydrofluoric acid solution in two ways; (i) matrix separation as BF₃ over hot plate and (ii) in situ matrix elimination inside graphite furnaces. The method detection limits calculated from blank samples are in the range of 0.5 (Ni) and 2.9 (Al) ng g⁻¹. Thus the MVPME-based sample preparation approach is well suited for the trace analysis of high purity di-boron trioxide used in microelectronics applications.     

A Highly Efficient Sandwich‐Like Symmetrical Dual‐Phase Oxygen‐Transporting Membrane Reactor for Hydrogen Production by Water Splitting

Water splitting coupled with partial oxidation of methane (POM) using an oxygen‐transporting membrane (OTM) would be a potentially ideal way to produce high‐purity hydrogen as well as syngas. Over the past decades, substantial efforts have been devoted to the development of supported membranes with appropriate configurations to achieve considerable performance improvements. Herein, we describe the design of a novel symmetrical membrane reactor with a sandwich‐like structure, whereby a largescale production (>10 mL min^?1 cm^?2) of hydrogen and syngas can be obtained simultaneously on opposite sides of the OTM. Furthermore, this special membrane reactor could regenerate the coke‐deactivated catalyst in situ by water steam in a single unit. These results represent an important first step in the development of membrane separation technologies for the integration of multiple chemical processes.     

A highly accurate and precise method for the assay of chromium metal and chromium(III) oxide

A method capable of a precision of 3 to 5 parts in ten thousand has been developed for the routine assay of high purity chromium metal and chromium trioxide. Use has been made of the favourable gravimetric factor of ferrous ammonium sulfate and of an amperometric end-point. Comparison with the arsenic trioxide method was made.     

Preparation and properties of antitubercular 1‐piperidino‐3‐arylthioureas

1‐Piperidino‐3‐arylthioureas, of interest in the investigation of novel heterocyclic structures for their anti‐tubercular activity, may be conveniently prepared in good yield and purity by the reaction of 1‐arninopiperi‐dine with aryl isothiocyanates in ethanol. The reaction takes place readily without the complication of thiourethane contaminants, and the products may be suitably identified by significant characteristics in the infrared spectra and the hydrogen and carbon magnetic resonance spectra.