Preparation of poly(biphenylene vinylene) type polymers by Ni‐promoted polycondensation and their basic optical properties

Ni(0)‐complex promoted dehalogenation polymerization of 1,2‐bis(4‐bromophenyl)ethylene derivatives gave poly(p‐biphenylene vinylene) type polymers, [—C₆H₂R—CR² = CR²—C₆H₂R—)_n (P(R¹,H) and P(H,R²) ], having substituents (R¹ = Me, Et, CHMe₂, and n‐C₈H₁₇, R² = Me, Et, n‐C₆H₁₃, n‐C₁₁H₂₃, and Ph) at the benzene ring or vinylene group in 90–99% yields. The polymers were soluble in organic solvents such as CHCl₃, dimethylformamide, and tetrahydrofuran, and gave M_n of 2.4–5.3 × 10³ in gel permeation chromatography analysis. The absorption peak of the polymers appeared at a longer wavelength than that of the corresponding monomers by about 30 nm due to the expansion of the π‐conjugation system. The polymers were photoluminescent in solutions and in their films, emitting blue or green light. P(R¹,H)s gave higher quantum yields (Φ = 0.35–0.51) than P(H,R²) s in CHCl₃. P(H,R²) s showed a large Stokes shift (9600–13,500 cm⁻¹) in their photoluminescence. Single‐layer and multilayer light emitting diodes using vacuum deposited thin film of P(H,Ph) were prepared. Polymers with long alkyl substituents formed an ordered structure in the solid state as judged from their XRD patterns. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1493–1504, 2000     

Polymerization of α‐amino acid N‐carboxyanhydrides catalyzed by rare earth tris(borohydride) complexes: Mechanism and hydroxy‐endcapped polypeptides

In this work, rare earth tris(borohydride) complexes, Ln(BH₄)₃(THF)₃ (Ln = Sc, Y, La, and Dy), have been used to catalyze the ring‐opening polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (BLG NCA). All the catalysts show high activities and the resulting poly(γ‐benzyl‐L ‐glutamate)s (PBLGs) are recovered with high yields (≥90%). The molecular weights (MWs) of PBLG can be controlled by the molar ratios of monomer to catalyst, and the MW distributions (MWDs) are relatively narrow (as low as 1.16) depending on the rare earth metals and reaction temperatures. Block copolypeptides can be easily synthesized by the sequential addition of two monomers. The obtained P(γ‐benzyl‐L ‐glutamate‐b‐ε‐carbobenzoxy‐L ‐lysine) [P(BLG‐b‐BLL)] and P(γ‐benzyl‐L ‐glutamate‐b‐alanine) [P(BLG‐b‐ALA)] have been well characterized by NMR, gel permeation chromatography, and differential scanning calorimetry measurements. A random copolymer P(BLG‐co‐BLL) with a narrow MWD of 1.07 has also been synthesized. The polymerization mechanisms have been investigated in detail. The results show that both nucleophilic attack at the 5‐CO of NCA and deprotonation of 3‐NH of NCA in the initiation process take place simultaneously, resulting in two active centers, that is, an yttrium ALA carbamate derivative [H₂BOCH₂(CH)NHC(O)OLn? ] and a N‐yttriumlated ALA NCA. Propagation then proceeds on these centers via both normal monomer insertion and polycondensation. After termination, two kinds of telechelic polypeptide chains, that is, α‐hydroxyl‐ω‐aminotelechelic chains and α‐carboxylic‐ω‐aminotelechelic ones, are formed as characterized by MALDI‐TOF MS, ¹H NMR, ¹³C NMR, ¹H–¹H COSY, and ¹H–¹³C HMQC measurements. By decreasing the reaction temperature, the normal monomer insertion pathway can be exclusively selected, forming an unprecedented α‐hydroxyl‐ω‐aminotelechelic polypeptide. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Alkali Metal and Alkaline Earth Metal Complexes with the Bis(borane‐diphenylphosphanyl)amido Ligand – Synthesis,Structures, and Catalysis for Ring‐Opening Polymerization of ϵ‐Caprolactone

The syntheses of lithium and alkaline earth metal complexes with the bis(borane‐diphenylphosphanyl)amido ligand ( 1 ‐ H ) of molecular formulas [{κ²‐N(PPh₂(BH₃))₂}Li(THF)₂] ( 2 ) and [{κ³‐N(PPh₂(BH₃))₂}₂M(THF)₂] [(M = Ca ( 3 ), Sr ( 4 ), Ba ( 5 )] are reported. The lithium complex 2 was obtained by treatment of bis(borane‐diphenylphosphanyl)amine ( 1 ‐ H ) with lithium bis(trimethylsilyl)amide in a 1:1 molar ratio via the silylamine elimination method. The corresponding homoleptic alkaline earth metal complexes 3 – 5 were prepared by two synthetic routes – first, the treatment of metal bis(trimethylsilyl)amide and protio ligand 1 ‐ H via the elimination of silylamine, and second, through salt metathesis reaction involving respective metal diiodides and lithium salt 2 . The molecular structures of lithium complex 2 and barium complex 5 were established by single‐crystal X‐ray diffraction analysis. In the solid‐state structure of 2 , the lithium ion is ligated by amido nitrogen atoms and hydrogen atoms of the BH₃ group in κ²‐coordination of the ligand 1 resulting in a distorted tetrahedral geometry around the lithium ion. However, in complex 5 , κ³‐coordination of the ligand 1 was observed, and the barium ion adopted a distorted octahedral arrangement. The metal complex 5 was tested as catalyst for the ring opening polymerization of ?‐caprolactone. High activity for the barium complex 5 towards ring opening polymerization (ROP) of ?‐caprolactone with a narrow polydispersity index was observed. Additionally, first‐principle calculations to investigate the structure and coordination properties of alkaline earth metal complexes 3 – 5 as a comparative study between the experimental and theoretical findings were described.     

Radical heterogeneous polymerization behavior of N‐methyl‐α‐fluoroacrylamide in benzene

The polymerization of N‐methyl‐α‐fluoroacrylamide (NMFAm) initiated with dimethyl 2,2′‐azobisisobutyrate (MAIB) in benzene was studied kinetically and with electron spin resonance. The polymerization proceeded heterogeneously with the highly efficient formation of long‐lived poly(NMFAm) radicals. The overall activation energy of the polymerization was 111 kJ/mol. The polymerization rate (R_p) at 50 °C is given by R_p = k[MAIB]^0.75±0.05 [NMFAm]^0.44±0.05. The concentration of the long‐lived polymer radical increased linearly with time. The formation rate (R_p?) of the long‐lived polymer radical at 50 °C is expressed by R_p? = k[MAIB]^1.0±0.1 [NMFAm]^0±0.1. The overall activation energy of the long‐lived radical formation was 128 kJ/mol, which agreed with the energy of initiation (129 kJ/mol), which was separately estimated. A comparison of R_p? with the initiation rate led to the conclusion that 1‐methoxycarbonyl‐1‐methylethyl radicals (primary radicals from MAIB), escaping from the solvent cage, were quantitatively converted into the long‐lived poly(NMFAm) radicals. Thus, this polymerization involves completely unimolecular termination due to polymer radical occlusion. ¹H NMR‐determined tacticities of resulting poly(NMFAm) were estimated to be rr = 0.34, mr = 0.48, and mm = 0.18. The copolymerization of NMFAm(M₁) and St(M₂) with MAIB at 50 °C in benzene gave monomer reactivity ratios of r₁ = 0.61 and r₂ = 1.79. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2196–2205, 2001     

Dihydrogen Generation from Amine/Boranes: Synthesis,FT‐ICR,and Computational Studies

A Fourier transform ion cyclotron resonance spectrometry (FT‐ICR) study of the gas‐phase protonation of ammonia‐borane and sixteen amine/boranes R¹R²R³N? BH₃ (including six compounds synthesized for the first time) has shown that, without exception, the protonation of amine/boranes leads to the formation of dihydrogen. The structural effects on the experimental energetic thresholds of this reaction were determined experimentally. The most likely intermediate and the observed final species (besides H₂) are R¹R²R³N? BH₄⁺ and R¹R²R³N? BH₂⁺, respectively. Isotopic substitution allowed the reaction mechanism to be ascertained. Computational analyses ([MP2/6‐311+G(d,p)] level) of the thermodynamic stabilities of the R¹R²R³N? BH₃ adducts, the acidities of the proton sources required for dihydrogen formation, and the structural effects on these processes were performed. It was further found that the family of R¹R²R³N? BH₄⁺ ions is characterized by a three‐center, two‐electron bond between B and a loosely bound H₂ molecule. Unexpected features of some R¹R²R³N? BH₄⁺ ions were found. This information allowed the properties of amine/boranes most suitable for dihydrogen generation and storage to be determined.     

Highly efficient ethylene/norbornene copolymerization by o‐Di(phenyl)phosphanylphenolate‐based half‐titanocene complexes

A series of o‐di(phenyl)phosphanylphenolate‐based half‐titanocene complexes CpTiCl₂[O‐2‐R¹‐4‐R²‐6‐(Ph₂P)C₆H₂] (Cp = C₅H₅, 2a : R¹ = R² = H; 2b : R¹ = F, R² = H; 2c : R¹ = Ph, R² = H; 2d : R¹ = SiMe₃, R² = H; 2e : R¹ = ^tBu, R² = H; 2f : R¹ = R² = ^tBu) have been synthesized in high yields (65–87%) by treating CpTiCl₃ with 1.0 equiv of the deprotonated ligands in THF. The ¹H and ³¹P NMR spectra indicated that the phosphorus is not coordinated to titanium in complexes 2a – c , but is coordinated to titanium in complexes 2d – f . Structures for 2c – f were further confirmed by X‐ray crystallography. Complex 2c is essentially a four‐coordinate tetrahedral geometry, whereas complexes 2d ‐ f adopt five‐coordinate distorted square–pyramid geometry around the titanium center. All complexes exhibited low to moderate activities toward homopolymerization of ethylene. Excitingly, they displayed excellent ability to copolymerize ethylene with norbornene, and catalytic activity was more than 100 times larger than that of ethylene homopolymerization in the case of Ph₃CB(C₆F₅)₄/ⁱBu₃Al as cocatalyst, affording the copolymers with high comonomer incorporations. Moreover, DFT calculations study had been performed to shed light on the active species and the fundamental role of NBE in improving the catalytic activity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013     

Bis(η5‐isopropyltetramethylcyclo­pentadienyl)(tetrahydroborato‐κ3H,H′,H′′)(tetrahydrofuran‐O)‐samarium(III): a lanthanidocene complex with a tridentate tetrahydroborato ligand

The lanthanidocene complex [Sm(BH₄)(C₁₂H₁₉)₂(C₄H₈O)], (I), shows a distorted tetrahedral arrangement around the central Sm^III atom. It consists of two η⁵‐isopropyltetramethylcyclopentadienyl ligands, one tetrahydroborato (BH₄^?) ligand bridging via H atoms to the lanthanide atom and one coordinating tetrahydrofuran (thf) molecule. The BH₄^? unit of (I) coordinates as a tridentate ligand with three bridging H atoms and one terminal H atom [Sm—B—H4 176 (2)°]. The η⁵‐isopropyl­tetra­methylcyclopentadienyl ligands of this bent‐sandwich complex [Cp1—Sm—Cp2 133.53 (1)° where Cp denotes the centroid of the cyclopentadienyl ring] adopt staggered conformations.     

Titanium(IV) complexes containing mono‐cyclopentadienyl and bulky trityloxy mixed ligands: synthesis and polymerization activity

Eight new R¹CpTiCl₂(OC(C₆H₄R²)Ph₂) complexes were synthesized by the reaction of R¹CpTiCl₃ with Ph₂(R²C₆H₄)COH (R²C₆H₄ = phenyl or o‐methyl‐phenyl) in the presence of Et₃N in good yield and characterized by ¹H NMR, elemental analysis, IR and mass spectrometry. A suitable single crystal of complex 2 (R¹: CH₃, R²: H) was obtained and the structure determined by X‐ray diffraction. When activated by methylaluminoxane (MAO), all complexes were active for the polymerization of ethylene and styrene. The effect of variation in temperature, catalyst concentration and MAO/catalyst molar ratio was also studied. Complex 5 (R¹: n‐C₄H₉, R²: H) showed a moderate conversion (37.4%) for the polymerization of methyl methacrylate. Copyright © 2005 John Wiley & Sons, Ltd.     

Selective α‐Monomethylation by an Amine‐Borane/N,N‐Dimethylformamide System as the Methyl Source

A new and practical α‐monomethylation strategy using an amine‐borane/N,N‐dimethylformamide (R₃N‐BH₃/DMF) system as the methyl source was developed. This protocol has been found to be effective in the α‐monomethylation of arylacetonitriles and arylacetamides. Mechanistic studies revealed that the formyl group of DMF delivered the carbon and one hydrogen atoms of the methyl group, and R₃N‐BH₃ donated the remaining two hydrogen atoms. Such a unique reaction pathway enabled controllable assemblies of CDH₂‐, CD₂H‐, and CD₃‐ units using Me₂NH‐BH₃/d₇‐DMF, Me₃N‐BD₃/DMF and Me₃N‐BD₃/d₇‐DMF systems, respectively. Further application of this method to the facile synthesis of anti‐inflammatory flurbiprofen and its varied deuterium‐labeled derivatives was demonstrated.     

(1R,3R,4S)‐1‐Benzyl‐3‐(tert‐butyldimethylsilyloxy)‐4‐(hydroxymethyl)pyrrolidine–borane: novel B—H...H—O hydrogen bonding

The absolute configuration of the title cis‐(1R,3R,4S)‐pyrrolidine–borane complex, C₁₈H₃₄BNO₂Si, was confirmed. Together with the related trans isomers (3S,4S) and (3R,4R), it was obtained unexpectedly from the BH₃·SMe₂ reduction of the corresponding chiral (3R,4R)‐lactam precursor. The phenyl ring is disordered over two conformations in the ratio 0.65:0.35. The crystallographic packing is dominated by the rarely found donor–acceptor hydroxy–borane O—H...H—B hydrogen bonds.     

Deep insights into the hydrolysis of N,N‐dialkylaminoethyl methacrylates in aqueous solution with 1H NMR spectroscopy

N,N‐dialkylaminoethyl methacrylate (DAEA) monomers are extensively used to prepare multi‐responsive polymers. However, these monomers face high risk of hydrolysis in their ester groups when being polymerized in water‐containing medias. Here, NMR spectroscopy was employed to continuously track the hydrolysis and solubility of four widely used DAEA monomers [CH₂CH₂R₁COO(CH₂)₂N(R₂)₂; R₁ = H or CH₃; R₂ = CH₃, CH₂CH₃ or CH(CH₃)₂] under typical polymerization conditions. With this technique, the hydrolysis reactivity and absolute hydrolysis amount of these monomers are separately examined, and then their kinetic correlations with solubility, molecular structure, pH, and temperature are established, so that the hydrolysis of DAEA monomers and even other esters with similar cyclic structure can be predicted. The present efforts are expected to provide a general understanding for the hydrolysis of all the DAEA monomers, benefitting to the optimization of polymerization toward well‐defined DAEA copolymers, as well as the design of smart soft matter for specific applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 914–923     

P‐Aminophosphaalkenes with C‐Isopropyldimethylsilyl Groups

Amination of the C‐isopropyldimethylsilyl P‐chlorophosphaalkene (iPrMe₂Si)₂C=PCl ( 1 ) leads to the P‐aminophosphaalkenes (iPrMe₂Si)₂C=PN(R)R′ (R, R′ = Me ( 2 ), R = H, R′ = nPr ( 3 ), R = H, R′ = iPr ( 4 ), R = H, R′ = tBu ( 5 ), R = H, R′ = 1‐Ada ( 6 ), R = H, R′ = CPh₃ ( 7 ), R = H, R′ = Ph ( 8 ), R = H, RR′ = 2,6‐iPr₂Ph (= DIP) ( 10 ), R = H, R′ = 2,4,6‐Me₃Ph (= Mes) ( 11 ), R = H, R′ = 2,4,6‐tBu₃Ph (= Mes*)] ( 12 ), R = H, R′ = SiMe₃ ( 13 ), and R, R′ = SiMe₂Ph (1 4 ). ³¹P‐NMR spectra confirm that phosphaalkenes 2 – 7 and 10 – 14 are monomeric in solution; the structures of 7 , 10 , and 12 were determined by X‐ray crystallography. Freshly prepared (iPrMe₂Si)₂C=PN(H)Ph ( 8 ) is a monomer that dimerizes with (N→C) proton migration within several hours to the stable diazadiphosphetidine [(iPrMe₂Si)₂CHPNPh]₂ ( 9 ). NMR‐scale reactions of deprotonated 5 and 13 with tBuiPrPCl provide by P–P bond formation the P‐phosphanyl iminophosphoranes [(iPrMe₂Si)₂C=](RN=)PPtBu(iPr) [R = tBu ( 15 ), R = Me₃Si ( 17 )]. Deprotonated 5 and Me₃GeCl deliver by N–Ge bond formation the aminophosphaalkene (iPrMe₂Si)₂C=PN(tBu)GeMe₃ ( 20 ), which with elemental selenium 5 undergoes (N→C) proton migration to form the alkyl(imino)(seleno)phosphorane [(iPrMe₂Si)₂CH](tBuN=)P=Se ( 21 ), which is a selenium‐bridged cyclic dimer in the solid state.     

High‐Speed Living Polymerization of Polar Vinyl Monomers by Self‐Healing Silylium Catalysts

This contribution describes the development and demonstration of the ambient‐temperature, high‐speed living polymerization of polar vinyl monomers (M) with a low silylium catalyst loading (≤ 0.05 mol % relative to M). The catalyst is generated in situ by protonation of a trialkylsilyl ketene acetal (^RSKA) initiator (I) with a strong Brønsted acid. The living character of the polymerization system has been demonstrated by several key lines of evidence, including the observed linear growth of the chain length as a function of monomer conversion at a given [M]/[I] ratio, near‐precise polymer number‐average molecular weight (M_n, controlled by the [M]/[I] ratio) with narrow molecular weight distributions (MWD), absence of an induction period and chain‐termination reactions (as revealed by kinetics), readily achievable chain extension, and the successful synthesis of well‐defined block copolymers. Fundamental steps of activation, initiation, propagation, and catalyst “self‐repair” involved in this living polymerization system have been elucidated, chiefly featuring a propagation “catalysis” cycle consisting of a rate‐limiting C? C bond formation step and fast release of the silylium catalyst to the incoming monomer. Effects of acid activator, catalyst and monomer structure, and reaction temperature on polymerization characteristics have also been examined. Among the three strong acids incorporating a weakly coordinating borate or a chiral disulfonimide anion, the oxonium acid [H(Et₂O)₂]⁺[B(C₆F₅)₄]^? is the most effective activator, which spontaneously delivers the most active R₃Si⁺, reaching a high catalyst turn‐over frequency (TOF) of 6.0×10³ h^?1 for methyl methacrylate polymerization by Me₃Si⁺ or an exceptionally high TOF of 2.4×10⁵ h^?1 for n‐butyl acrylate polymerization by iBu₃Si⁺, in addition to its high (>90 %) to quantitative efficiencies and a high degree of control over M_n and MWD (1.07–1.12). An intriguing catalyst “self‐repair” feature has also been demonstrated for the current living polymerization system.     

Synthesis of amphiphilic A2B star‐shaped copolymers of polystyrene‐b‐[poly(ethylene oxide)]2 via atom transfer nitroxide radical coupling

The amphiphilic A₂B star‐shaped copolymers of polystyrene‐b‐[poly(ethylene oxide)]₂ (PS‐b‐PEO₂) were synthesized via the combination of atom transfer nitroxide radical coupling (ATNRC) with ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP) mechanisms. First, a novel V‐shaped 2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐PEO₂ (TEMPO‐PEO₂) with a TEMPO group at middle chain was obtained by ROP of ethylene oxdie monomers using 4‐(2,3‐dihydroxypropoxy)‐TEMPO and diphenylmethyl potassium as coinitiator. Then, the linear PS with a bromine end group (PS‐Br) was obtained by ATRP of styrene monomers using ethyl 2‐bromoisobutyrate as initiator. Finally, the copolymers of PS‐b‐PEO₂ were obtained by ATNRC between the TEMPO and bromide groups on TEMPO‐PEO₂ and PS‐Br, respectively. The structures of target copolymers and their precursors were all well‐defined by gel permeation chromatographic and nuclear magnetic resonance (¹H NMR). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hydrogen‐bonded ribbons in ethyl (E)‐3‐[2‐amino‐4,6‐bis(dimethylamino)pyrimidin‐5‐yl]‐2‐cyanoacrylate and 2‐[(2‐amino‐4,6‐di‐1‐piperidylpyrimidin‐5‐yl)methylene]malononitrile

The pyrimidine rings in ethyl (E)‐3‐[2‐amino‐4,6‐bis(dimethylamino)pyrimidin‐5‐yl]‐2‐cyanoacrylate, C₁₄H₂₀N₆O₂, (I), and 2‐[(2‐amino‐4,6‐di‐1‐piperidylpyrimidin‐5‐yl)methylene]malononitrile, C₁₈H₂₃N₇, (II), which crystallizes with Z′ = 2 in the space group, are both nonplanar with boat conformations. The molecules of (I) are linked by a combination of N—H...N and N—H...O hydrogen bonds into chains of edge‐fused R₂²(8) and R₄⁴(20) rings, while the two independent molecules in (II) are linked by four N—H...N hydrogen bonds into chains of edge‐fused R₂²(8) and R₂²(20) rings. This study illustrates both the readiness with which highly‐substituted pyrimidine rings can be distorted from planarity and the significant differences between the supramolecular aggregation in two rather similar compounds.     

4‐(3‐Azaniumylpropyl)morpholin‐4‐ium chloride hydrogen oxalate: an unusual example of a dication with different counter‐anions

The mixed organic–inorganic title salt, C₇H₁₈N₂O²⁺·C₂HO₄⁻·Cl⁻, forms an assembly of ionic components which are stabilized through a series of hydrogen bonds and charge‐assisted intermolecular interactions. The title assembly crystallizes in the monoclinic C2/c space group with Z = 8. The asymmetric unit consists of a 4‐(3‐azaniumylpropyl)morpholin‐4‐ium dication, a hydrogen oxalate counter‐anion and an inorganic chloride counter‐anion. The organic cations and anions are connected through a network of N—H...O, O—H...O and C—H...O hydrogen bonds, forming several intermolecular rings that can be described by the graph‐set notations R₃³(13), R₂¹(5), R₁²(5), R₂¹(6), R₂³(6), R₂²(8) and R₃³(9). The 4‐(3‐azaniumylpropyl)morpholin‐4‐ium dications are interconnected through N—H...O hydrogen bonds, forming C(9) chains that run diagonally along the ab face. Furthermore, the hydrogen oxalate anions are interconnected via O—H...O hydrogen bonds, forming head‐to‐tail C(5) chains along the crystallographic b axis. The two types of chains are linked through additional N—H...O and O—H...O hydrogen bonds, and the hydrogen oxalate chains are sandwiched by the 4‐(3‐azaniumylpropyl)morpholin‐4‐ium chains, forming organic layers that are separated by the chloride anions. Finally, the layered three‐dimensional structure is stabilized via intermolecular N—H...Cl and C—H...Cl interactions.     

Light‐Induced Rearrangement of Thioether‐Substituted Phosphanide Ligands: Scope and Limitations of a Remarkable Isomerization

Treatment of the thioether‐substituted secondary phosphanes R²PH(C₆H₄‐2‐SR¹) [R²=(Me₃Si)₂CH, R¹=Me ( 1_PH ), iPr ( 2_PH ), Ph ( 3_PH ); R²=tBu, R¹=Me ( 4_PH ); R²=Ph, R¹=Me ( 5_PH )] with nBuLi yields the corresponding lithium phosphanides, which were isolated as their THF ( 1 – 5_Pa ) and tmeda ( 1 – 5_Pb ) adducts. Solid‐state structures were obtained for the adducts [R²P(C₆H₄‐2‐SR¹)]Li(L)_n [R²=(Me₃Si)₂CH, R¹=nPr, (L)_n=tmeda ( 2_Pb ); R²=(Me₃Si)₂CH, R¹=Ph, (L)_n=tmeda ( 3_Pb ); R²=Ph, R¹=Me, (L)_n=(THF)_1.33 ( 5_Pa ); R²=Ph, R¹=Me, (L)_n=([12]crown‐4)₂ ( 5_Pc )]. Treatment of 1_PH with either PhCH₂Na or PhCH₂K yields the heavier alkali metal complexes [{(Me₃Si)₂CH}P(C₆H₄‐2‐SMe)]M(THF)_n [M=Na ( 1_Pd ), K ( 1_Pe )]. With the exception of 2_Pa and 2_Pb , photolysis of these complexes with white light proceeds rapidly to give the thiolate species [R²P(R¹)(C₆H₄‐2‐S)]M(L)_n [M=Li, L=THF ( 1_Sa , 3_Sa – 5_Sa ); M=Li, L=tmeda ( 1_Sb , 3_Sb – 5_Sb ); M=Na, L=THF ( 1_Sd ); M=K, L=THF ( 1_Se )] as the sole products. The compounds 3_Sa and 4_Sa may be desolvated to give the cyclic oligomers [[{(Me₃Si)₂CH}P(Ph)(C₆H₄‐2‐S)]Li]₆ (( 3_S )₆) and [[tBuP(Me)(C₆H₄‐2‐S)]Li]₈ (( 4_S )₈), respectively. A mechanistic study reveals that the phosphanide–thiolate rearrangement proceeds by intramolecular nucleophilic attack of the phosphanide center at the carbon atom of the substituent at sulfur. For 2_Pa / 2_Pb , competing intramolecular β‐deprotonation of the n‐propyl substituent results in the elimination of propene and the formation of the phosphanide–thiolate dianion [{(Me₃Si)₂CH}P(C₆H₄‐2‐S)]^2?.     

Chiral one‐dimensional hydrogen‐bonded architectures constructed from single‐enantiomer phosphoric triamides

The two single‐enantiomer phosphoric triamides N‐(2,6‐difluorobenzoyl)‐N′,N′′‐bis[(S)‐(−)‐α‐methylbenzyl]phosphoric triamide, [2,6‐F₂‐C₆H₃C(O)NH][(S)‐(−)‐(C₆H₅)CH(CH₃)NH]₂P(O), denoted L‐1 , and N‐(2,6‐difluorobenzoyl)‐N′,N′′‐bis[(R)‐(+)‐α‐methylbenzyl]phosphoric triamide, [2,6‐F₂‐C₆H₃C(O)NH][(R)‐(+)‐(C₆H₅)CH(CH₃)NH]₂P(O), denoted D‐1 , both C₂₃H₂₄F₂N₃O₂P, have been investigated. In their structures, chiral one‐dimensional hydrogen‐bonded architectures are formed along [100], mediated by relatively strong N—H…O(P) and N—H…O(C) hydrogen bonds. Both assemblies include the noncentrosymmetric graph‐set motifs R₂²(10), R₂¹(6) and C₂²(8), and the compounds crystallize in the chiral space group P1. Due to the data collection of L‐1 at 120 K and of D‐1 at 95 K, the unit‐cell dimensions and volume show a slight difference; the contraction in the volume of D‐1 with respect to that in L‐1 is about 0.3%. The asymmetric units of both structures consist of two independent phosphoric triamide molecules, with the main difference being seen in one of the torsion angles in the OPNHCH(CH₃)(C₆H₅) part. The Hirshfeld surface maps of these levo and dextro isomers are very similar; however, they are near mirror images of each other. For both structures, the full fingerprint plot of each symmetry‐independent molecule shows an almost asymmetric shape as a result of its different environment in the crystal packing. It is notable that NMR spectroscopy could distinguish between compounds L‐1 and D‐1 that have different relative stereocentres; however, the differences in chemical shifts between them were found to be about 0.02 to 0.001 ppm under calibrated temperature conditions. In each molecule, the two chiral parts are also different in NMR media, in which chemical shifts and P–H and P–C couplings have been studied.     

Easily available niobium(V) mixed chloro‐alkoxide complexes as catalytic precursors for ethylene polymerization

The dinuclear [NbCl_n(OR)_(5‐n)]₂ (n = 4, R = Et, 1 ; n = 4, R = CH₂Ph, 2 ; n = 3, R = Et, 3 ; n = 2, R = Et, 4 ; n = 2, R = , 5 ), and [Nb(OEt)₅]₂, 6 , and the mononuclear niobium compounds NbCl₄[κ²? OCH₂CH(R′)OR] (R = Me, R′ = H, 7 ; R = Et, R′ = H, 8 ; R = CH₂Cl, R′ = H, 9 ; R = CH₂CH₂OMe, R′ = H, 10 ; R = R′ = Me, 11 ), NbBr₄[κ²? OCH₂CH₂OMe], 12 , and NbCl₃(κ²? OCH₂CH₂OMe)(κ¹? OCH₂CH₂OMe), 13 , were tested in ethylene polymerization. Optimized reaction conditions included the use of D‐MAO as co‐catalyst and chlorobenzene as solvent at 50 °C. Complex 7 , whose X‐Ray structure is described here for the first time, exhibited the highest activity ever reported for a niobium catalyst in alkene polymerization [151 kg_polymer × mol_Nb^?1 × h^?1 × bar^?1]. Compounds 1 , 3‐5 , 8 , 13 showed activities similar to that of 7 . Linear polyethylenes (characterized by FT‐IR, NMR, GPC, and DSC analyses) with a broad polydispersivity were obtained. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Bis(phosphinimino)methanide Borohydride Complexes of the Rare‐Earth Elements as Initiators for the Ring‐Opening Polymerization of ε‐Caprolactone: Combined Experimental and Computational Investigations

Rare‐earth‐metal borohydrides are known to be efficient catalysts for the polymerization of apolar and polar monomers. The bis‐borohydrides [{CH(PPh₂NSiMe₃)₂}La(BH₄)₂(THF)] and [{CH(PPh₂NSiMe₃)₂}Ln(BH₄)₂] (Ln=Y, Lu) have been synthesized by two different synthetic routes. The lanthanum and the lutetium complexes were prepared from [Ln(BH₄)₃(THF)₃] and K{CH(PPh₂NSiMe₃)₂}, whereas the yttrium analogue was obtained from in situ prepared [{CH(PPh₂NSiMe₃)₂}YCl₂]₂ and NaBH₄. All new compounds were characterized by standard analytical/spectroscopic techniques, and the solid‐state structures were established by single‐crystal X‐ray diffraction. The ring‐opening polymerization (ROP) of ε‐caprolactone initiated by [{CH(PPh₂NSiMe₃)₂}La(BH₄)₂(THF)] and [{CH(PPh₂NSiMe₃)₂}Ln(BH₄)₂] (Ln=Y, Lu) was studied. At 0 °C the molar mass distributions determined were the narrowest values (M?_w/M?_n=1.06–1.11) ever obtained for the ROP of ε‐caprolactone initiated by rare‐earth‐metal borohydride species. DFT investigations of the reaction mechanism indicate that this type of complex reacts in an unprecedented manner with the first B? H activation being achieved within two steps. This particularity has been attributed to the metallic fragment based on the natural bond order analysis.