Metal‐Free σ‐Bond Metathesis in 1,3,2‐Diazaphospholene‐Catalyzed Hydroboration of Carbonyl Compounds

The first metal‐free catalytic hydroboration of carbonyl derivatives has been developed in which a catalytic amount of 1,3,2‐diazaphospholene effectively promotes a hydroboration reaction of aliphatic and aromatic aldehydes and ketones. The reaction mechanism involves the cleavage of both the P? O bond of the alkoxyphosphine intermediate and the B? H bond of pinacolborane as well as the formation of P? H and B? O bonds. Thus, the reaction proceeds through a non‐metal σ‐bond metathesis. Kinetic and computational studies suggest that the σ‐bond metathesis occurred in a stepwise but nearly concerted manner.     

Highly Efficient Ruthenium‐Catalyzed N‐Formylation of Amines with H2 and CO2

A highly efficient catalyst system based on ruthenium‐pincer‐type complexes has been discovered for N‐formylation of various amines with CO₂ and H₂, thus affording the corresponding formamides with excellent productivity (turnover numbers of up to 1 940 000 in a single batch) and selectivity. Using a simple catalyst recycling protocol, the catalyst was reused for 12 runs in N,N‐dimethylformamide production without significant loss of activity, thus demonstrating the potential for practical utilization of this cost‐effective process. A one‐pot two‐step procedure for hydrogenation of CO₂ to methanol via the intermediacy of formamide formation has also been developed.     

Rapid Synthesis of Chiral 1,2‐Bisphosphine Derivatives through Copper(I)‐Catalyzed Asymmetric Conjugate Hydrophosphination

1,2‐Bisphosphines have been identified as one class of important and powerful chiral ligands in asymmetric catalysis with transition metals. Herein, a copper(I)‐catalyzed asymmetric hydrophosphination of α,β‐unsaturated phosphine sulfides was developed with the assistance of “soft–soft” interaction between copper(I)‐catalyst and the phosphine sulfide moiety, which afforded 1,2‐bisphosphine derivatives with diversified electronic nature and steric hindrance in high to excellent yields with high to excellent enantioselectivity. Moreover, the challenging catalytic asymmetric hydrophosphination/protonation reaction was achieved with excellent enantioselectivity. Strikingly, the dynamic kinetic resolution of racemic diarylphosphines was also successfully carried out with high to excellent diastereo‐ and enantioselectivities. Interestingly, the nucleophilic copper(I)‐diphenylphosphide species was characterized by ³¹P NMR spectrum and mass spectrum. At last, three products were transformed to chiral 1,2‐bisphosphines, which were employed as ligands in Rh‐catalyzed asymmetric hydrogenation of α‐amino‐α,β‐unsaturated ester. The α‐amino acid derivative was produced in high enantioselectivity, which demonstrated the utility of the present methodology.     

Pd‐Catalyzed Decarboxylative Cross‐Coupling of 2‐Carboxyazine N‐Oxides with Various (Hetero)aryl Halides

Decarboxylative cross‐coupling reactions of substituted 2‐carboxyazine N‐oxides, with a variety of (hetero)aryl halides, by bimetallic Pd⁰/Cu^I and Pd⁰/Ag^I catalysis are reported. Two possible pathways, a conventional bimetallic‐catalyzed decarboxylative arylation, as well as a protodecarboxylative/direct C?H arylation sequence have been considered. These methods provide the first general decarboxylative arylation methodology for the 2‐carboxyazine series.     

Photoinduced Energy Transfer from Poly(N‐vinylcarbazole) to Tricarbonylchloro‐(2,2′‐bipyridyl)rhenium(I)

This work investigates the photoinduced energy transfer from poly(N‐vinylcarbazole) (PVK), as a donor material, to fac‐(2,2′‐bipyridyl)Re(CO)₃Cl, as a catalyst acceptor, for its potential application towards CO₂ reduction. Photoluminescence quenching experiments reveal dynamic quenching through resonance energy transfer in solid donor/acceptor mixtures and in solid/liquid systems. The bimolecular reaction rate constant at solution–film interfaces for the elementary reaction of the excited state with the quencher material could be determined as 8.8(±1.4)×10¹¹ L mol^?1 s^?1 by using Stern–Volmer analysis. This work shows that PVK is an effective and cheap absorber material that can act efficiently as a redox photosensitizer in combination with fac‐(2,2′‐bipyridyl)Re(CO)₃Cl as a catalyst acceptor, which might lead to possible applications in photocatalytic CO₂ reduction.     

Effective Formylation of Amines with Carbon Dioxide and Diphenylsilane Catalyzed by Chelating bis(tzNHC) Rhodium Complexes

The reductive formylation of amines using CO₂ and hydrosilanes is an attractive method for incorporating CO₂ into valuable organic compounds. However, previous systems required either high catalyst loadings or high temperatures to achieve high efficiency, and the substrate scope was mostly limited to simple amines. To address these problems, a series of alkyl bridged chelating bis(NHC) rhodium complexes (NHC=N‐heterocyclic carbene) have been synthesized and applied to the reductive formylation of amines using CO₂ and Ph₂SiH₂. A rhodium‐based bis(tzNHC) complex (tz=1,2,3‐triazol‐5‐ylidene) was identified to be highly effective at a low catalyst loading and ambient temperature, and a wide substrate scope, including amines with reducible functional groups, were compatible.     

N‐Heterocyclic Carbene–Ytterbium Amide as a Recyclable Homogeneous Precatalyst for Hydrophosphination of Alkenes and Alkynes

The N‐heterocyclic carbene–ytterbium(II) amides (NHC)₂Yb[N(SiMe₃)₂]₂ ( 1 : NHC: 1,3,4,5‐tetramethylimidazo‐2‐ylidene (IMe₄); 2 : NHC: 1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene (IiPr)) and the NHC‐stabilized rare‐earth phosphide (IMe₄)₃Yb(PPh₂)₂ ( 3 ) have been synthesized and fully characterized. Complexes 1 – 3 are active precatalysts for the hydrophosphination of alkenes, alkynes, and dienes and exhibited much superior catalytic activity to that of the NHC‐free amide (THF)₂Yb[N(SiMe)₂]₂. Complex 1 is the most active precursor among the three complexes. In particular, complex 1 can be recycled and recovered from the reaction media after the catalytic reactions. Furthermore, it was found that complex 3 could catalyze the polymerization of styrene to yield atactic polystyrenes with low molecular weights. To the best of our knowledge, complex 1 represents the first rare‐earth complex that can be recovered after catalytic reactions.     

A New Route to N‐Aryl 2‐Alkenamides,N‐Allyl N‐Aryl 2‐Alkenamides,and N‐Aryl α,β‐Unsaturated γ‐Lactams from N‐Aryl 3‐(Phenylsulfonyl)propanamides

A series of N‐aryl 2‐alkenamides were produced efficiently by treating N‐aryl 3‐(phenylsulfonyl)‐propanamides with potassium tert‐butoxide in THF at 0°C. With out isolation, it was further treated with an additional equivalent of potassium tert‐butoxide and allyl bromide to give N‐allyl N‐aryl 2‐alkenamides in one pot in good yields. Followed by a ring‐closing metathesis reaction, these N‐allyl N‐aryl 2‐alkenamides were respectively converted into corresponding N‐aryl α,β‐unsaturated γ‐lactams in moderate yields.     

Copper(II)‐Catalyzed Synthesis of N‐Substituted‐3‐amino‐4‐cyano‐isoquinoline‐1(2H)‐ones by the Reaction of N‐Substituted‐2‐iodobenzamides with Malononitrile

A novel Cu(OAc)₂·H₂O catalyzed coupling reaction of N‐substituted‐2‐iodobenzamides with malononitrile to afford N‐substituted‐3‐amino‐4‐cyano‐isoquinoline‐1(2H)‐ones is described. The reaction proceeded in DMSO at 90°C for 5 h in nitrogen without external ligands.     

Living polymerization of α‐amino acid‐N‐carboxyanhydrides

This article reviews recent developments in the polymerization of α‐amino acid‐ N‐carboxyanhydrides (NCAs) to form polypeptides. Traditional methods used to polymerize these monomers are described, and limitations in the utility of these systems for the preparation of polypeptides with controlled molecular weights and narrow molecular weight distributions are discussed. The development of transition‐metal‐based initiators, which activate the monomers to form covalent active species, permits the formation of polypeptides via the living polymerization of NCAs. In these systems, polymer molecular weights are controlled by monomer‐to‐initiator stoichiometry, polydispersities are low, and block copolypeptides can be prepared. The scope and limitations of these initiators and their key features and mode of operation are described in detail in this highlight. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3011–3018, 2000     

Highly Enantioselective Aza‐Michael Reaction between Alkyl Amines and β‐Trifluoromethyl β‐Aryl Nitroolefins

The aza‐Michael addition reaction is a vital transformation for the synthesis of functionalized chiral amines. Despite intensive research, enantioselective aza‐Michael reactions with alkyl amines as the nitrogen donor have not been successful. We report the use of chiral N‐heterocyclic carbenes (NHCs) as noncovalent organocatalysts to promote a highly selective aza‐Michael reaction between primary alkyl amines and β‐trifluoromethyl β‐aryl nitroolefins. In contrast to classical conjugate‐addition reactions, a strategy of HOMO‐raising activation was used. Chiral trifluoromethylated amines were synthesized in high yield (up to 99 %) with excellent enantioselectivity (up to 98 % ee).     

Palladium‐Catalyzed N‐Alkylation of Amides and Amines with Alcohols Employing the Aerobic Relay Race Methodology

Possibly because homogeneous palladium catalysts are not typical borrowing hydrogen catalysts and ligands are thus ineffective in catalyst activation under conventional anaerobic conditions, they had not been used in the N‐alkylation reactions of amines/amides with alcohols in the past. By employing the aerobic relay race methodology with Pd‐catalyzed aerobic alcohol oxidation being a more effective protocol for alcohol activation, ligand‐free homogeneous palladiums are successfully used as active catalysts in the dehydrative N‐alkylation reactions, giving high yields and selectivities of the alkylated amides and amines. Mechanistic studies implied that the reaction most probably proceeds via the novel relay race mechanism we recently discovered and proposed.     

Preparation of CO2‐switchable latexes using N‐[3‐(dimethylamino)propyl]‐methacrylamide (DMAPMAm)

CO₂‐switchable polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl methacrylate) (PBMA) latexes were prepared via surfactant‐free emulsion polymerization (SFEP) under a CO₂ atmosphere, employing N‐[3‐(dimethylamino)propyl]methacrylamide (DMAPMAm) as a CO₂‐switchable, water‐soluble, and hydrolytically stable comonomer. The conversion of the SFEP of styrene reaches >95% in less than 5 h. The resulting latexes have near monodisperse particles (PDI ≤ 0.05), as confirmed by DLS and TEM. The latexes could be destabilized by bubbling nitrogen (N₂) and heating at 65 °C for 30 min, and easily redispersed by only bubbling CO₂ for a short time without using sonication. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1059–1066