Asymmetric and Geometry‐Selective α‐Alkenylation of α‐Amino Acids

Both E‐ and Z‐N′‐alkenyl urea derivatives of imidazolidinones may be formed selectively from enantiopure α‐amino acids. Generation of their enolate derivatives in the presence of K⁺ and [18]crown‐6 induces intramolecular migration of the alkenyl group from N′ to Cα with retention of double bond geometry. DFT calculations indicate a partially concerted substitution mechanism. Hydrolysis of the enantiopure products under acid conditions reveals quaternary α‐alkenyl amino acids with stereodivergent control of both absolute configuration and double bond geometry.     

Geometry‐Retentive C‐Alkenylation of Lithiated α‐Aminonitriles: Quaternary α‐Alkenyl Amino Acids and Hydantoins

α‐Amino nitriles tethered to alkenes through a urea linkage undergo intramolecular C‐alkenylation on treatment with base by attack of the lithionitrile derivatives on the N′‐alkenyl group. A geometry‐retentive alkene shift affords stereospecifically the E or Z isomer of the 5‐alkenyl‐4‐iminohydantoin products from the corresponding starting E ‐ or Z ‐N ′‐alkenyl urea, each of which may be formed from the same N ‐allyl precursor by stereodivergent alkene isomerization. The reaction, formally a nucleophilic substitution at an sp² carbon atom, allows the direct regioselective incorporation of mono‐, di‐, tri‐, and tetrasubstituted olefins at the α‐carbon of amino acid derivatives. The initially formed 5‐alkenyl iminohydantoins may be hydrolyzed and oxidatively deprotected to yield hydantoins and unsaturated α‐quaternary amino acids.     

(C6F5)3B Catalyzed Chemoselective and ortho‐Selective Substitution of Phenols with α‐Aryl α‐Diazoesters

The development of an efficient method for the site‐selective substitution of unprotected phenols has long been considered as an attractive but challenging task. Herein, we describe a highly chemo‐ and ortho‐selective substitution reaction of phenols with α‐aryl α‐diazoacetates with commercially available (C₆F₅)₃B as the catalyst. This reaction proceeds under simple and mild conditions with high efficiency, it features a wide substrate scope and can be easily scaled up.     

Enantio‐ and Site‐Selective α‐Fluorination of N‐Acyl 3,5‐Dimethylpyrazoles Catalyzed by Chiral π–CuII Complexes

Catalytic enantioselective α‐fluorination reactions of carbonyl compounds are among the most powerful and efficient synthetic methods for constructing optically active α‐fluorinated carbonyl compounds. Nevertheless, α‐fluorination of α‐nonbranched carboxylic acid derivatives is still a big challenge because of relatively high pK_a values of their α‐hydrogen atoms and difficulty of subsequent synthetic transformation without epimerization. Herein we show that chiral copper(II) complexes of 3‐(2‐naphthyl)‐l ‐alanine‐derived amides are highly effective catalysts for the enantio‐ and site‐selective α‐fluorination of N‐(α‐arylacetyl) and N‐(α‐alkylacetyl) 3,5‐dimethylpyrazoles. The substrate scope of the transformation is very broad (25 examples including a quaternary α‐fluorinated α‐amino acid derivative). α‐Fluorinated products were converted into the corresponding esters, secondary amides, tertiary amides, ketones, and alcohols with almost no epimerization in high yield.     

Catalytic Asymmetric Mannich‐Type Reaction Enabled by Efficient Dienolization of α,β‐Unsaturated Pyrazoleamides†

(E)‐α,β‐Unsaturated pyrazoleamides undergo facile dienolization to furnish copper(I)‐(1Z,3Z)‐dienolates as the major in the presence of a copper(I)‐(R)‐DTBM‐SEGPHOS catalyst and Et₃N, which react with aldimines to afford syn‐vinylogous products as the major diastereoisomers in high regio‐ and enantioselectivities. In some cases, the diastereoselectivity is low, possibly due to the low ratio of copper(I)‐(1Z,3Z)‐dienolates to copper(I)‐(1Z,3E)‐dienolates. (Z)‐Allylcopper(I) species is proposed as effective intermediates, which may form an equilibrium with copper(I)‐(1Z,3Z)‐dienolates. Interestingly, the present methodology is a nice complement to our previous report, in which (E)‐β,γ‐unsaturated pyrazoleamides were employed as the prenucleophiles in the copper(I)‐catalyzed asymmetric vinylogous Mannich‐Type reaction and anti‐vinylogous products were obtained. In the previous reaction, copper(I)‐ (1Z,3E)‐dienolates were generated through α‐deprotonation, which might form an equilibrium with (E)‐allylcopper(I) species. Therefore, it is realized in the presence of a copper(I) catalyst that (E)‐α,β‐unsaturated pyrazoleamides lead to syn‐products and (E)‐β,γ‐unsaturated pyrazoleamides lead to anti‐products. Finally, by use of (E)‐β,γ‐unsaturated pyrazoleamide, (E)‐α,β‐unsaturated pyrazoleamide, (R)‐DTBM‐SEGPHOS, and (S)‐DTBM‐SEGPHOS, the stereodivergent synthesis of all four stereoisomers is successfully carried out. Then by following a three‐step reaction sequence, all four stereoisomers of N‐Boc‐2‐Ph‐3‐Me‐piperidine are synthesized in good yields, which potentially serve as common structure units in pharmaceutically active compounds.     

Catalytic Asymmetric Intramolecular Homologation of Ketones with α‐Diazoesters: Synthesis of Cyclic α‐Aryl/Alkyl β‐Ketoesters

A catalytic asymmetric intramolecular homologation of simple ketones with α‐diazoesters was firstly accomplished with a chiral N,N′‐dioxide–Sc(OTf)₃ complex. This method provides an efficient access to chiral cyclic α‐aryl/alkyl β‐ketoesters containing an all‐carbon quaternary stereocenter. Under mild conditions, a variety of aryl‐ and alkyl‐substituted ketone groups reacted with α‐diazoester groups smoothly through an intramolecular addition/rearrangement process, producing the β‐ketoesters in high yield and enantiomeric excess.     

Stereoselective Synthesis of Highly Functionalized Nitrocyclopropanes through the Organocatalyic Michael‐Addition‐Initiated Cyclization of Bromonitromethane and β,γ‐Unsaturated α‐Ketoesters

A highly diastereo‐ and enantioselective cyclopropanation of β,γ‐unsaturated α‐ketoesters with bromonitromethane has been successfully developed through a domino Michael‐addition/intramolecular‐alkylation strategy. Acceptable yields (up to 89 %) and enantioselectivities (up to 96 % ee) have been obtained.     

An activated catalyst RhH(PPh3)4‐dppe‐ Me2S2 for α‐methylthiolaton of α‐phenyl ketones

In the presence of catalytic amounts of RhH(PPh₃)₄, 1,2‐bis(diphenylphosphino)ethane (dppe), and dimethyl disulfide, cyclic and acyclic α‐phenyl ketones reacted with p‐cyano‐α‐methylthioa‐ cetophenone giving α‐methylthio‐α‐phenylketones. The activated catalyst containing dimethyl disulfide was effective for the α‐methylthiolation reaction of these less reactive substrates. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 22:18–23, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20650     

A facile and efficient synthesis of diethyl α,α‐chlorofluoroalkanephosphonates

A facile and efficient synthetic methodo‐ logy for the preparation of diethyl α,α‐chlorofluoro‐ alkanephosphonates is described. A wide variety of diethyl α‐hydroxyphosphonates were investigated by a two‐step halogenation procedure, which includes nucleophilic chlorination with PPh₃ and CCl₄ and electrophilic fluorination with N‐fluorobisbenzene‐ sulfonimide. Aromatic and aliphatic α,α‐chlorofluoro‐ phosphonates could be prepared by this method with acceptable yields. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:250–255, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20604     

Regio‐ and Enantioselective Synthesis of Trifluoromethyl‐Substituted Homoallylic α‐Tertiary NH2‐Amines by Reactions Facilitated by a Threonine‐Based Boron‐Containing Catalyst

A method for catalytic regio‐ and enantioselective synthesis of trifluoromethyl‐substituted and aryl‐, heteroaryl‐, alkenyl‐, and alkynyl‐substituted homoallylic α‐tertiary NH₂‐amines is introduced. Easy‐to‐synthesize and robust N‐silyl ketimines are converted to NH‐ketimines in situ, which then react with a Z‐allyl boronate. Transformations are promoted by a readily accessible l ‐threonine‐derived aminophenol‐based boryl catalyst, affording the desired products in up to 91 % yield, >98:2 α:γ selectivity, >98:2 Z:E selectivity, and >99:1 enantiomeric ratio. A commercially available aminophenol may be used, and allyl boronates, which may contain an alkyl‐, a chloro‐, or a bromo‐substituted Z‐alkene, can either be purchased or prepared by catalytic stereoretentive cross‐metathesis. What is more, Z‐trisubstituted allyl boronates may be used. Various chemo‐, regio‐, and diastereoselective transformations of the α‐tertiary homoallylic NH₂‐amine products highlight the utility of the approach; this includes diastereo‐ and regioselective epoxide formation/trichloroacetic acid cleavage to generate differentiated diol derivatives.     

Rhodium‐catalyzed Asymmetric Hydrogenation of α‐Dehydroamino Ketones: A General Approach to Chiral α‐amino Ketones

Rhodium/DuanPhos‐catalyzed asymmetric hydrogenation of aliphatic α‐dehydroamino ketones has been achieved and afforded chiral α‐amino ketones in high yields and excellent enantioselectives (up to 99 % ee), which could be reduced further to chiral β‐amino alcohols by LiAlH(tBuO)₃ with good yields_. This protocol provides a readily accessible route for the synthesis of chiral α‐amino ketones and chiral β‐amino alcohols.     

Photoinduced and thermal reactions of α‐cyano‐β‐bromomethylcinnamide with 1‐benzyl‐1,4‐dihydronicotinamide

The photoinduced reaction of a mixture of (Z)‐α‐cyano‐β‐bromomethylcinnamide (1) and (E)‐α‐cyano‐β‐bromomethylcinnamide (2) with 1‐benzyl‐1, 4‐dihydronicotinamide produces a mixture of the (E)‐ and (Z)‐ isomers of α‐cyano‐β‐methylcinnamide (3 and 4). Using spin‐trapping technique for monitoring reactive intermediate, it is shown that the reaction proceeds via electron transfer‐debromination‐H abstraction mechanism. The thermal reaction of the same substrate with BNAH at 60°C in the dark gives three products: the (E)‐ and (Z)‐isomers of α‐cyano‐β‐methylcinnamide and a dehydrodimeric product; 2, 7‐dicyano‐3, 6‐diphenylocta‐2, 4, 6‐trien‐1, 8‐dioic amide (7). Based on product analysis, scavenger experiment and cyclic voltammetry, an electron transfer‐debromination‐disproportionation mechanism is proposed.     

Diastereo‐ and Enantioselective Iridium Catalyzed Carbonyl (α‐Cyclopropyl)allylation via Transfer Hydrogenation

The first examples of diastereo‐ and enantioselective carbonyl α‐(cyclopropyl)allylation are reported. Under the conditions of iridium catalyzed transfer hydrogenation using the chiral precatalyst (R)‐Ir‐ I modified by SEGPHOS, carbonyl α‐(cyclopropyl)allylation may be achieved with equal facility from alcohol or aldehyde oxidation levels. This methodology provides a conduit to hitherto inaccessible inaccessible enantiomerically enriched cyclopropane‐containing architectures.     

Enantioselective Synthesis of α‐Hydroxy Amides and β‐Amino Alcohols from α‐Keto Amides

Synthesis of enantiomerically enriched α‐hydroxy amides and β‐amino alcohols has been accomplished by enantioselective reduction of α‐keto amides with hydrosilanes. A series of α‐keto amides were reduced in the presence of chiral Cu^II/(S)‐DTBM‐SEGPHOS catalyst to give the corresponding optically active α‐hydroxy amides with excellent enantioselectivities by using (EtO)₃SiH as a reducing agent. Furthermore, a one‐pot complete reduction of both ketone and amide groups of α‐keto amides has been achieved using the same chiral copper catalyst followed by tetra‐n‐butylammonium fluoride (TBAF) catalyst in presence of (EtO)₃SiH to afford the corresponding chiral β‐amino alcohol derivatives.     

Cu/Pd Synergistic Dual Catalysis: Asymmetric α‐Allylation of an α‐CF3 Amide

Despite the burgeoning demand for fluorine‐containing chemical entities, the construction of CF₃‐containing stereogenic centers has remained elusive. Herein, we report the strategic merger of Cu^I/base‐catalyzed enolization of an α‐CF₃ amide and Pd⁰‐catalyzed allylic alkylation in an enantioselective manner to deliver chiral building blocks bearing a stereogenic carbon center connected to a CF₃, an amide carbonyl, and a manipulable allylic group. The phosphine complexes of Cu^I and Pd⁰ engage in distinct catalytic roles without ligand scrambling to render the dual catalysis operative to achieve asymmetric α‐allylation of the amide. The stereoselective cyclization of the obtained α‐CF₃‐γ,δ‐unsaturated amides to give tetrahydropyran and γ‐lactone‐fused cyclopropane skeletons highlights the synthetic utility of the present catalytic method as a new entry to non‐racemic CF₃‐containing compounds.     

Highly Enantioselective Carbonyl–Ene Reactions of 2,3‐Diketoesters: Efficient and Atom‐Economical Process to Functionalized Chiral α‐Hydroxy‐β‐Ketoesters

Carbonyl–ene reactions of 2,3‐diketoesters catalyzed by [Cu{(S,S)‐tBu‐box}](SbF₆)₂ [box=bis(oxazoline)] generate chiral α‐functionalized α‐hydroxy‐β‐ketoesters in up to 94 % yield and 97 % ee. The 2,3‐diketoesters are conveniently accessed from the corresponding α‐diazo‐β‐ketoester, and a catalyst loading as low as 1.0 mol % can be achieved.     

α‐Diamine Nickel Catalysts with Nonplanar Chelate Rings for Ethylene Polymerization

A series of novel α‐diamine nickel complexes, (ArNH‐C(Me)‐(Me)C‐NHAr)NiBr₂, 1 : Ar=2,6‐diisopropylphenyl, 2 : Ar=2,6‐dimethylphenyl, 3 : Ar=phenyl), have been synthesized and characterized. X‐ray crystallographic analysis showed that the coordination geometry of the α‐diamine nickel complexes is markedly different from conventional α‐diimine nickel complexes, and that the chelate ring (N‐C‐C‐N‐Ni) of the α‐diamine nickel complex is significantly distorted. The α‐diamine nickel catalysts also display different steric effects on ethylene polymerization in comparison to the α‐diimine nickel catalyst. Increasing the steric hindrance of the α‐diamine ligand by substitution of the o‐methyl groups with o‐isopropyl groups leads to decreased polymerization activity and molecular weight; however, catalyst thermal stability is significantly enhanced. Living polymerizations of ethylene can be successfully achieved using 1 /Et₂AlCl at 35 °C or 2 /Et₂AlCl at 0 °C. The bulky α‐diamine nickel catalyst 1 with isopropyl substituents can additionally be used to control the branching topology of the obtained polyethylene at the same level of branching density by tuning the reaction temperature and ethylene pressure.     

Efficient Synthesis of β‐Hydroxy‐α‐Amino Acid Derivatives via Direct Catalytic Asymmetric Aldol Reaction of α‐Isothiocyanato Imide with Aldehydes

An easily available and efficient chiral N,N′‐dioxide–nickel(II) complex catalyst has been developed for the direct catalytic asymmetric aldol reaction of α‐isothiocyanato imide with aldehydes which produces the products in morderate to high yields (up to 98 %) with excellent diastereo‐ (up to >99:1 d.r.) and enantioselectivities (up to >99 % ee). A variety of aromatic, heteroaromatic, α,β‐unsaturated, and aliphatic aldehydes were found to be suitable substrates in the presence of 2.5 mol % L ‐proline‐derived N,N′‐dioxide L5 –nickel(II) complex. This process was air‐tolerant and easily manipulated with available reagents. Based on experimental investigations, a possible transition state has been proposed to explain the origin of reactivity and asymmetric inductivity.     

Highly Enantioselective Synthesis of 1,2,3‐Substituted Cyclopropanes by Using α‐Iodo‐ and α‐Chloromethylzinc Carbenoids

Herein, we report the enantio‐ and diastereoselective formation of trans‐iodo‐ and trans‐chlorocyclopropanes from α‐iodo‐ and α‐chlorozinc carbenoids by using a dioxaborolane‐derived chiral ligand. The synthetically useful iodocyclopropane building blocks were derivatized by an electrophilic trapping of the corresponding cyclopropyl lithium species or a Negishi coupling to give access to a variety of enantioenriched 1,2,3‐substituted cyclopropanes. The synthetic utility of this method was demonstrated by the formal synthesis of an HIV‐1 protease inhibitor. In addition, the related stereoselective bromocyclopropanation was also investigated. New insights about the relative electrophilicity of haloiodomethylzinc carbenoids are also presented.     

1,8‐Diazabicyclo[5.4.0]undec‐7‐ene: A Remarkable Base in the Debromination of 4‐ or 5‐Substituted N‐Benzyl α‐Bromo‐α‐p‐Toluenesulfonylglutarimide

Debromination of N‐benzyl 4‐ or 5‐substituted α‐bromo‐α‐p‐toluenesulfonylglutarimides is achieved with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) to give the N‐benzyl 4‐ or 5‐substituted α‐p‐toluenesulfonylglutarimides. The DBU/THF system is applied to a new methodology for the synthesis of bicyclic glutarimide skeleton in moderate yields.