Metal‐Size Influence in Iso‐Selective Lactide Polymerization

Iso‐selective initiators for the ring‐opening polymerization (ROP) of rac‐lactide are rare outside of Group 13. We describe the first examples of highly iso‐selective lutetium initiators. The phosphasalen lutetium ethoxide complex shows excellent iso‐selectivity, with a P_i value of 0.81–0.84 at 298 K, excellent rates, and high degrees of polymerization control. Conversely, the corresponding La derivative exhibits moderate heteroselectivity (P_s=0.74, 298 K). Thus, the choice of metal center is shown to be crucial in determining the level and mode of stereocontrol. The relative order of rates for the series of complexes is inversely related to metallic covalent radius: that is, La>Y>Lu.     

Rapid Ring‐Opening Polymerization of D,L‐Lactide by Microwaves

Summary: Poly(D ,L ‐lactide) with a molar mass of 10⁵ g · mol⁻¹ and a yield over 90% was produced in 10 min by the ring‐opening polymerization of D ,L ‐lactide under microwave irradiation with forward power of 255 W. A degradation of the poly(D ,L ‐lactide) was also induced by microwaves with a power level over 340 W. The molar mass of poly(D ,L ‐lactide) was dependent upon the competition between the polymerization of D ,L ‐lactide and the degradation of the resulting polymer.

Profiles of molar mass versus microwave irradiation time (1.8 g DLLA, 0.1% Sn(Oct)₂).     

Synthetic and Mechanistic Aspects of the Immortal Ring‐Opening Polymerization of Lactide and Trimethylene Carbonate with New Homo‐ and Heteroleptic Tin(II)‐Phenolate Catalysts

Several new heteroleptic Sn^II complexes supported by amino‐ether phenolate ligands [Sn{LOⁿ}(Nu)] (LO¹=2‐[(1,4,7,10‐tetraoxa‐13‐azacyclopentadecan‐13‐yl)methyl]‐4,6‐di‐tert‐butylphenolate, Nu=NMe₂ ( 1 ), N(SiMe₃)₂ ( 3 ), OSiPh₃ ( 6 ); LO²=2,4‐di‐tert‐butyl‐6‐(morpholinomethyl)phenolate, Nu=N(SiMe₃)₂ ( 7 ), OSiPh₃ ( 8 )) and the homoleptic Sn{LO¹}₂ ( 2 ) have been synthesized. The alkoxy derivatives [Sn{LO¹}(OR)] (OR=OiPr ( 4 ), (S)‐OCH(CH₃)CO₂iPr ( 5 )), which were generated by alcoholysis of the parent amido precursor, were stable in solution but could not be isolated. [Sn{LO¹}]⁺[H₂N{B(C₆F₅)₃}₂]^? ( 9 ), a rare well‐defined, solvent‐free tin cation, was prepared in high yield. The X‐ray crystal structures of compounds 3 , 6 , and 8 were elucidated, and compounds 3 , 6 , 8 , and 9 were further characterized by ¹¹⁹Sn Mössbauer spectroscopy. In the presence of iPrOH, compounds 1 – 5 , 7 , and 9 catalyzed the well‐controlled, immortal ring‐opening polymerization (iROP) of L ‐lactide (L ‐LA) with high activities (ca. 150–550 mol_L?LA mol_Sn^?1 h^?1) for tin(II) complexes. The cationic compound 9 required a higher temperature (100 °C) than the neutral species (60 °C); monodisperse poly(L ‐LA)s were obtained in all cases. The activities of the heteroleptic pre‐catalysts 1 , 3 , and 7 were virtually independent of the nature of the ancillary ligand, and, most strikingly, the homoleptic complex 2 was equally competent as a pre‐catalyst. Polymerization of trimethylene carbonate (TMC) occurs much more slowly, and not at all in the presence of LA; therefore, the generation of PLA‐PTMC copolymers is only possible if TMC is polymerized first. Mechanistic studies based on ¹H and ¹¹⁹Sn{¹H} NMR spectroscopy showed that the addition of an excess of iPrOH to compound 3 yielded a mixture of compound 4 , compound [Sn(OiPr)₂]_n 10 , and free {LO¹}H in a dynamic temperature‐dependent and concentration‐dependent equilibrium. Upon further addition of L ‐LA, two active species were detected, [Sn{LO¹}(OPLLA)] ( 12 ) and [Sn(OPLLA)₂] ( 14 ), which were also in fast equilibrium. Based on assignment of the ¹¹⁹Sn{¹H} NMR spectrum, all of the species present in the ROP reaction were identified; starting from either the heteroleptic ( 1 , 3 , 7 ) or homoleptic ( 2 ) pre‐catalysts, both types of pre‐catalysts yielded the same active species. The catalytic inactivity of the siloxy derivative 6 confirmed that ROP catalysts of the type 1 – 5 could not operate according to an activated‐monomer mechanism. These mechanistic studies removed a number of ambiguities regarding the mechanism of the (i)ROPs of L ‐LA and TMC promoted by industrially relevant homoleptic or heteroleptic Sn^II species.     

Ring Opening Polymerization of Lactide under Solvent‐Free Conditions Catalyzed by a Chlorotitanium Calix[4]arene Complex

A novel chlorotitanium calix[4]arene complex was synthesized and tested, without activator, as catalyst for the polymerization of L ‐ and rac‐lactide under solvent‐free conditions. The catalyst displayed high activity, which depended on the monomer‐to‐catalyst molar ratio, and led to highly isotactic PLLA. Despite concomitant transesterification during the polymerization, polylactide formation was well‐controlled, the molar mass distribution indexes remaining in the restricted range of 1.2–1.4.

     

Ring‐opening Polymerization of L‐Lactide by an Anionic Cobalt(II) Aryloxide

The reaction of anhydrous CoCl₂ with NaOAr (ArO=2,4,6‐tri‐tert‐butylphenoxo) in THF at room temperature in 1:3 molar ratio afforded anionic cobalt aryloxide [Na(THF)₆][Co(OAr)₃] ( 1 ). The definite structure of this complex was characterized by X‐ray single crystal diffraction. It was found that this anionic aryloxo cobalt(II) complex could effectively initiate the ring‐opening polymerization of L‐lactide both in solution and in bulk, leading to high molecular weight poly(L‐lactide).     

三(2,4,6-三甲基苯氧基)稀土配合物引发DL-丙交酯开环聚合特征与机理的研究

Tris(2,4,6-trimethylphenolate) lanthartide [Ln(OTMP)3] has been prepared and employed for ring-opening polymerization of D,L-lactide (LA) as single-component catalysts. The characteristics, kinetics and mechanism were examined. The polymerization is first-order with respect to monomer and initiator concentration, and the overall activation energy amounts to 62.9 kJ/mol. DSC curve disclosed the random structure of PLA. ^1H NMR spectrum analysis demonstrates that the polymerization of LA proceeded through acyl-oxygen bond cleavage.     

Stereoselective polymerization of rac‐lactide with a bulky aluminum/Schiff base complex

An aluminum/Schiff base complex {[2,2-dimethyl-1,3-propylenebis(3,5-di-tert-butylsalicylideneiminato)](isopropanolato)aluminum(III) ( 2 )} based on a bulky ligand and aluminum isopropoxide was prepared and employed for the stereoselective ring-opening polymerization (ROP) of rac-lactide (rac-LA). The initiator was characterized with nuclear magnetic resonance (NMR), crystal structure measurements, and elemental analysis. It contained a five-coordinate aluminum atom that was trigonal bipyramidal in the solid state according to the crystal structure measurements. The two conformational stereoisomers of 2 exchanged quickly on the NMR scale. Compound 2 polymerized rac-LA into a crystalline polymer that was characterized with ¹H NMR, wide-angle X-ray diffraction, electrospray ionization mass spectrometry, and gel permeation chromatography. The kinetics of the polymerization were first-order in both the monomer and initiator, and there was a linear relationship between the rac-LA conversion and the number-average molecular weight of poly(rac-LA) with a narrow molecular distribution (1.04–1.08). These features showed that the polymerization was well controlled. The high melting temperature (196–201 °C) and isotacticity of poly(rac-LA) indicated that complex 2 was a highly stereoselective initiator for the ROP of rac-LA. The stereoselectivity was as high as 90%, and the stereoblocks of poly(rac-LA) by complex 2 contained an average of 20 units (average block length = 20) of enantiomerically pure lactic acid. The activation energy (23.6 kJ mol⁻¹) was obtained according to an Arrhenius equation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5974–5982, 2004     

Yttrium Complexes as Catalysts for Living and Immortal Polymerization of Lactide to Highly Heterotactic PLA

Amino‐alkoxy‐bis(phenolate) yttrium complexes act in the presence of an excess of alcohol (up to 50 equiv. vs. Y) as highly active and stereoselective catalysts for rac‐lactide and rac‐β‐butyrolactone polymerizations. These versatile systems enable the production of large quantities of polymer with small amounts of catalyst, optimizing productivity, and also allow the preparation of polymers with functional end groups, which may be employed as intermediates for macromolecular engineering applications.

     

Aluminum salen and salan complexes in the ring‐opening polymerization of cyclic esters: Controlled immortal and copolymerization of rac‐β‐butyrolactone and rac‐lactide

Aluminum‐based salen and salan complexes mediate the ring‐opening polymerization (ROP) of rac‐β‐butyrolactone (β‐BL), rac‐lactide, and ε‐caprolactone. Al‐salen and Al‐salan complexes exhibit excellent control over the ROP of rac‐β‐butyrolactone, yielding atactic poly(3‐hydroxybutyrate) (PHB) with narrow PDIs of <1.15 for Al‐salen and <1.05 for Al‐salan. Kinetic studies reveal pseudo‐first‐order polymerization kinetics and a linear relationship between molecular weight and percent conversion. These complexes also mediate the immortal ROP of rac‐β‐BL and rac‐lactide, through the addition of excess benzyl alcohol of up to 50 mol eq., with excellent control observed. A novel methyl/adamantyl‐substituted Al‐salen system further improves control over the ROP of rac‐lactide and rac‐β‐BL, yielding atactic PHB and highly isotactic poly(lactic acid) (P_m = 0.88). Control over the copolymerization of rac‐lactide and rac‐β‐BL was also achieved, yielding poly(lactic acid)‐co‐poly(3‐hydroxybutyrate) with narrow PDIs of <1.10. ¹H NMR spectra of the copolymers indicate a strong bias for the insertion of rac‐lactide over rac‐β‐BL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polymerization kinetics of rac‐lactide initiated with alcohol/stannous octoate using in situ attenuated total reflectance‐fourier transform infrared spectroscopy: An initiator study

rac‐Lactide polymerization kinetics in THF at 72 °C were monitored in real‐time using mid‐infrared ATR‐FTIR spectroscopy, with diamond composite insertion probe and light conduit technology. Monomer concentration as a function of time was acquired using the 1240 cm^?1 resonance associated with the ? CO? O? C? stretch. Polymerizations were initiated with either n‐propanol (PrOH), ethylene glycol (EG), trimethylol propane (TMP), or pentaerythritol (PENTA) with the coinitiator stannous octoate (Sn(Oct)₂). Polymerizations were found to be reversible at high monomer conversions, with a residual monomer concentration at 72 °C (345 K) of 0.081 M. The polymerizations were internally first‐order with respect to monomer, indicating a constant concentration of propagating centers. For a typical reaction with [rac‐LA]₀ = 1.0 M, [PENTA]₀ = 1.3 × 10^?2 M, and [Sn(Oct)₂] = 2.5 × 10^?2 M, the first‐order rate constant, k_app was measured as 1.8 × 10^?4 s^?1. First‐order rate constants were determined to be independent of polymer architecture (i.e., initiator functionality) and proportional to [Sn(Oct)₂] for [Sn(Oct)₂]₀/[ROH]₀ ? 1, where [ROH]₀ represents the initial concentration of initiating hydroxyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 797–803, 2009     

Beyond Stereoselectivity,Switchable Catalysis: Some of the Last Frontier Challenges in Ring‐Opening Polymerization of Cyclic Esters

Metal‐based catalysts and initiators have played a pivotal role in the ring‐opening polymerization (ROP) of cyclic esters, thanks to their high activity and remarkable ability to control precisely the architectures of the resulting polyesters in terms of molar mass, dispersity, microstructure, or tacticity. Today, after two decades of extensive research, the field is slowly reaching maturity. However, several challenges remain, while original concepts have emerged around new types or new applications of catalysis. This Review is not intended to comprehensively cover all of these aspects. Rather, it provides a personal overview of the very recent progress achieved in some selected, important aspects of ROP catalysis—stereocontrol and switchable catalysis. Hence, the first part addresses the development of new metal‐based catalysts for the isoselective ROP of racemic lactide towards stereoblock copolymers, and the use of syndioselective ROP metal catalysts to control the monomer sequence in copolymers. A second part covers the development of ROP catalysts—primarily metal‐based catalysts, but also organocatalysts—that can be externally regulated by the use of chemical or photo stimuli to switch them between two states with different catalytic abilities. Current challenges and opportunities are highlighted.     

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxy complexes

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxides {1,4‐dithiabutanediylbis(4,6‐di‐tert‐butylphenolate)}(isopropoxy)indium ( 1 ) and {1,4‐dithiabutanediylbis(4,6‐di(2‐phenyl‐2‐propyl)phenolate)}(isopropoxy)indium ( 2 ) is found to follow first‐order kinetics for monomer conversion. Activation parameters ΔH^? and ΔS^? suggest an ordered transition state. Initiators 1 and 2 polymerize meso‐lactide faster than rac‐lactide. In general, compound 2 with the more bulky cumyl ortho‐substituents in the phenolate moiety shows higher polymerization activity than 1 with tert‐butyl substituents. meso‐Lactide is polymerized to syndiotactic poly(meso‐lactides) in THF, while polymerization of rac‐lactide in THF gives atactic poly(rac‐lactides) with solvent‐dependent preferences for heterotactic (THF) or isotactic (CH₂Cl₂) sequences. Indium bis(phenolate) compound rac‐(1,2‐cyclohexanedithio‐2,2′‐bis{4,6‐di(2‐phenyl‐2‐propyl)phenolato}(isopropoxy)indium ( 3 ) polymerizes meso‐lactide to give syndiotactic poly(meso‐lactide) with narrow molecular weight distributions and rac‐lactide in THF to give heterotactically enriched poly(rac‐lactides). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4983–4991     

The influence of organosuperbases on the structure and activity of dialkylgallium alkoxides in the polymerization of rac‐lactide: the road to stereo diblock PLA copolymers

Stereoselective polymerization of rac‐lactide is one of the most important issues as the properties of polylactide (PLA) depend strongly on its tacticity. There is, however, a paucity of catalysts that allow for easy switching between heteroselectivity and isoselectivity, which limits the synthesis of stereo copolymers of PLA and modification of polylactide properties. Dialkylgallium alkoxides activated by organosuperbases have been used as catalysts in the ring‐opening polymerization of racemic lactide (rac‐LA). The reaction of (S,S)‐[Me₂Ga(μ‐OCH(Me)CO₂Me)]₂ ( 1 ) with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) or 7‐methyl‐1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (MTBD) resulted in the formation of isoselective gallium species, highly active in the polymerization of rac‐LA. DOSY (diffusion‐ordered spectroscopy) NMR was indicative for the presence of dimeric gallium species. However, the structure of model monomeric gallium alkoxide Me₂Ga(ON) (where ON is monoanionic bidentate ligand possessing organosuperbase functionality) shows that the presence of an organosuperbase may substantially weaken Ga?O_alkoxide?Ga bridges. The facile switch of stereoselectivity upon addition of organosuperbase to nonselective/heteroselective 1 allowed for the first time the synthesis of diblock polylactide comprised of isotactically and heterotactically enriched blocks. Copyright © 2013 John Wiley & Sons, Ltd.     

Zinc(II) complexes of Triaza and Amidinate ligands: Efficient initiators for the ring‐opening polymerization of ε‐Caprolactone and rac‐Lactide

Zinc complexes supported by tertiary 1,3,5‐triazapenta‐1,3‐dienate ligand (L¹) and N ‐benzoyl‐N′ ‐arylbenzamidinate [aryl =2,6‐diisopropylphenyl (L²), phenyl (L³)] ligands have been synthesized and characterized. The reaction of L¹H with ZnEt₂ affords a mononuclear zinc complex [L¹ZnEt] ( 1 ) in good yield. Tetra nuclear zinc complex [(L¹)₂Zn₄O(OAc)₄] ( 2 ) is prepared by treating L¹H with one equivalent of Zn(OAc)₂ in toluene. Further, dinuclear zinc complexes [L²ZnEt]₂ ( 3 ) and [L³ZnEt]₂ ( 4 ) are obtained in good yields from L²H and L³H with ZnEt₂ in toluene respectively_. The complexes 1–4 have been characterized by ¹H/¹³C NMR spectroscopy and single crystal X‐ray diffraction studies. All of the complexes have been explored for their catalytic activity toward the ring‐opening polymerization (ROP) of ε ‐caprolactone. It has been found that complex 1 is an active catalyst for the polymerization of ε ‐caprolactone in presence of a cocatalyst benzyl alcohol (BnOH). While complex 2 is as active as 1 there is no need for a cocatalyst for the polymerization to proceed. Dinuclear zinc complexes 3 and 4 show very high activity for the ROP of ε ‐caprolactone (CL) and rac ‐lactide (LA) without requiring a cocatalyst. The resultant polymers are found to have very high molecular weight (M _n = 296 X 10³ g mol⁻¹) and relatively narrow polydispersity index compared to 1 and 2 .     

Stereoselective ring‐opening polymerization of rac‐lactide with a single‐site,racemic aluminum alkoxide catalyst: Synthesis of stereoblock poly(lactic acid)

The polymerization of racemic lactide with a racemic aluminum alkoxide catalyst is reported. Microstructural analysis of the polymer produced with ¹H NMR spectroscopy revealed that an isotactic stereoblock poly(lactic acid) formed, where each enantiomerically pure block contained an average of 11 lactide monomer units. The melting point of this polymer, 179 °C, was higher than that of the enantiomerically pure polymer, consistent with the cocrystallization of the enantiomeric blocks of the polymer. The mechanism of the polymer formation is currently unknown, although a polymer exchange pathway, where living chain ends switch between metal centers to produce diastereomeric active species, is proposed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4686–4692, 2000     

稀土硫化物：e–己内酯开环聚合新催化剂

The ring-opening polymerization （ROP） of ε-caprolactone （ε-CL） using lanthanide thiolate complexes [（CH3CsH4）2Sm（μ-SPh）（THF）]2 （1） and Sm（SPh）3（HMPA）3 （2） as initiators has been investigated for the first time. Both of 1 and 2 were found to be highly efficient initiators for the ROP of ε-CL. The poly（ε-caprolactone） （PCL） with molecular weight Mn up to 1.97 ×10^5 and relatively narrow molecular weight distributions （1.20〈MW/Mn〈 2.00） have been obtained in high yield in the temperature range of 35-65℃. According to the polymer yield, 2 showed much higher activity than 1. However, the number-average molecular weight of PCL obtained with 2 was much lower than with 1. The possible polymerization mechanism of the ε-CL polymerization has been proposed based on the results of the end group analysis of the ε-CL oligomer.     

Aluminum,calcium and zinc complexes supported by potentially tridentate iminophenolate ligands: synthesis and use in the ring‐opening polymerization of lactide

The coordination chemistry of the potentially tridentate phenoxyethyl‐ and benzylaminoethyl‐iminophenol pro‐ligands {ONO}H and {ONN}H on to calcium, zinc and aluminum centers has been studied. {ONO}Ca(N(SiMe₃)₂)(THF) (1) was prepared by a one‐pot salt metathesis procedure but the analogous reaction with {ONN}H led to intractable mixtures. Reaction of {ONO}H and {ONN}H with ZnEt₂ (0.5 or 1 equiv.) systematically led to isolation of the corresponding homoleptic complexes {ONO}₂Zn (2) and {ONN}₂Zn (3). The dimethylaluminum complexes {ONO}AlMe₂ (4) and {ONN}AlMe₂ (5) were readily prepared by treatment of AlMe₃ with 1 equiv. of the corresponding pro‐ligands. Compounds 2 and 4 both feature monomeric structures in the solid state, with chelating iminophenolate ligands and free‐hanging phenoxyethyl arms. The amido complex 1 was shown to be a moderately active initiator for the controlled ring‐opening polymerization (ROP) of racemic lactide at room temperature, yielding polylactides with high initiation efficiencies, relatively narrow polydispersities and a slight heterotactic bias. Immortal polymerizations were achieved by combining excess isopropanol to 1, offering up to 50 macromolecules per metal center, with well‐controlled molecular features. The dimethylaluminum compounds 4 and 5 initiated the controlled ROP of lactide in the presence of 1 equiv. of benzyl alcohol as a co‐initiator but required higher temperatures. Copyright © 2012 John Wiley & Sons, Ltd.