On the Influence of Oxygen on the Degradation of Fe‐N‐C Catalysts

Fe‐N‐C catalysts containing atomic FeN_x sites are promising candidates as precious‐metal‐free catalysts for oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. The durability of Fe‐N‐C catalysts in fuel cells has been extensively studied using accelerated stress tests (AST). Herein we reveal stronger degradation of the Fe‐N‐C structure and four‐times higher ORR activity loss when performing load cycling AST in O₂‐ vs. Ar‐saturated pH 1 electrolyte. Raman spectroscopy results show carbon corrosion after AST in O₂, even when cycling at low potentials, while no corrosion occurred after any load cycling AST in Ar. The load‐cycling AST in O₂ leads to loss of a significant fraction of FeN_x sites, as shown by energy dispersive X‐ray spectroscopy analyses, and to the formation of Fe oxides. The results support that the unexpected carbon corrosion occurring at such low potential in the presence of O₂ is due to reactive oxygen species produced between H₂O₂ and Fe sites via Fenton reactions.     

Efficient Fe‐Co‐N‐C Electrocatalyst Towards Oxygen Reduction Derived from a Cationic CoII‐based Metal–Organic Framework Modified by Anion‐Exchange with Potassium Ferricyanide

Fe‐Co‐N‐C electrocatalysts have proven superior to their counterparts (e.g. Fe‐N‐C or Co‐N‐C) for the oxygen reduction reaction (ORR). Herein, we report on a unique strategy to prepare Fe‐Co‐N‐C?x (x refers to the pyrolysis temperature) electrocatalysts which involves anion‐exchange of [Fe(CN)₆]^3? into a cationic Co^II‐based metal‐organic framework precursor prior to heat treatment. Fe‐Co‐N‐C‐900 exhibits an optimal ORR catalytic performance in an alkaline electrolyte with an onset potential (E_onset: 0.97 V) and half‐wave potential (E_1/2: 0.86 V) comparable to that of commercial Pt/C (E_onset=1.02 V; E_1/2=0.88 V), which outperforms the corresponding Co‐N‐C‐900 sample (E_onset=0.92 V; E_1/2=0.84 V) derived from the same MOF precursor without anion‐exchange modification. This is the first example of Fe‐Co‐N‐C electrocatalysts fabricated from a cationic Co^II‐based MOF precursor that dopes the Fe element via anion‐exchange, and our current work provides a new entrance towards MOF‐derived transition‐metal (e.g. Fe or Co) and nitrogen‐codoped carbon electrocatalysts with excellent ORR activity.     

Efficient Oxygen Reduction Reaction (ORR) Catalysts Based on Single Iron Atoms Dispersed on a Hierarchically Structured Porous Carbon Framework

Single Fe atoms dispersed on hierarchically structured porous carbon (SA‐Fe‐HPC) frameworks are prepared by pyrolysis of unsubstituted phthalocyanine/iron phthalocyanine complexes confined within micropores of the porous carbon support. The single‐atom Fe catalysts have a well‐defined atomic dispersion of Fe atoms coordinated by N ligands on the 3D hierarchically porous carbon support. These SA‐Fe‐HPC catalysts are comparable to the commercial Pt/C electrode even in acidic electrolytes for oxygen reduction reaction (ORR) in terms of the ORR activity (E_1/2=0.81 V), but have better long‐term electrochemical stability (7 mV negative shift after 3000 potential cycles) and fuel selectivity. In alkaline media, the SA‐Fe‐HPC catalysts outperform the commercial Pt/C electrode in ORR activity (E_1/2=0.89 V), fuel selectivity, and long‐term stability (1 mV negative shift after 3000 potential cycles). Thus, these nSA‐Fe‐HPCs are promising non‐platinum‐group metal ORR catalysts for fuel‐cell technologies.     

Iron Carbide Nanoparticles Encapsulated in Mesoporous Fe‐N‐Doped Carbon Nanofibers for Efficient Electrocatalysis

Exploring low‐cost and high‐performance nonprecious metal catalysts (NPMCs) for oxygen reduction reaction (ORR) in fuel cells and metal–air batteries is crucial for the commercialization of these energy conversion and storage devices. Here we report a novel NPMC consisting of Fe₃C nanoparticles encapsulated in mesoporous Fe‐N‐doped carbon nanofibers, which is synthesized by a cost‐effective method using carbonaceous nanofibers, pyrrole, and FeCl₃ as precursors. The electrocatalyst exhibits outstanding ORR activity (onset potential of ?0.02 V and half‐wave potential of ?0.140 V) closely comparable to the state‐of‐the‐art Pt/C catalyst in alkaline media, and good ORR activity in acidic media, which is among the highest reported activities of NPMCs.     

Single‐Atom Cr−N4 Sites Designed for Durable Oxygen Reduction Catalysis in Acid Media

Single‐atom catalysts (SACs) are attracting widespread interest for the catalytic oxygen reduction reaction (ORR), with Fe?N_x SACs exhibiting the most promising activity. However, Fe‐based catalysts suffer serious stability issues as a result of oxidative corrosion through the Fenton reaction. Herein, using a metal‐organic framework as an anchoring matrix, we for the first time obtained pyrolyzed Cr/N/C SACs for the ORR, where the atomically dispersed Cr is confirmed to have a Cr?N₄ coordination structure. The Cr/N/C catalyst exhibits excellent ORR activity with an optimal half‐wave potential of 0.773 V versus RHE. More excitingly, the Fenton reaction is substantially reduced and, thus, the final catalysts show superb stability. The innovative and robust active site for the ORR opens a new possibility to circumvent the stability issue of the non‐noble metal ORR catalysts.     

Isolated Single Iron Atoms Anchored on N‐Doped Porous Carbon as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

The development of low‐cost, efficient, and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. Herein, we made a highly reactive and stable isolated single‐atom Fe/N‐doped porous carbon (ISA Fe/CN) catalyst with Fe loading up to 2.16 wt %. The catalyst showed excellent ORR performance with a half‐wave potential (E _1/2) of 0.900 V, which outperformed commercial Pt/C and most non‐precious‐metal catalysts reported to date. Besides exceptionally high kinetic current density (J _k) of 37.83 mV cm⁻² at 0.85 V, it also had a good methanol tolerance and outstanding stability. Experiments demonstrated that maintaining the Fe as isolated atoms and incorporating nitrogen was essential to deliver the high performance. First principle calculations further attributed the high reactivity to the high efficiency of the single Fe atoms in transporting electrons to the adsorbed OH species.     

Synergistic Enhancement of Electrocatalytic Activity toward Oxygen Reduction Reaction in Alkaline Electrolytes with Pentabasic (Fe,B, N,S, P)‐Doped Reduced Graphene Oxide

As alternatives to Pt‐based electrocatalysts, the development of nonprecious metal catalysts with high performance in the cathodic oxygen reduction reaction (ORR) is highly desirable for widespread use in fuel cells. Here we report a simple approach for preparing pentabasic (Fe, B, N, S, P)‐doped reduced graphene oxide (rGO) via a two‐step doping method of adding boric acid and ferric chloride to ternary (N, S, P)‐doped rGO (NSPG). Electrochemical investigation of the composites for the ORR revealed that simultaneously doping appropriate amounts of Fe and B into the NSPG produced a synergistic effect that endowed the prepared catalyst with both a positively shifted ORR half‐wave potential and high selectivity for the 4e^? reduction of O₂. The optimized Fe₂B‐NSPG catalyst approached a 4e^? process for the ORR with a half‐wave potential (E_1/2=0.90 V vs. RHE) even 30 mV higher than that of the commercial Pt/C catalyst in alkaline solution. Furthermore, relative to the Pt/C catalyst, the Fe₂B‐NSPG demonstrated superior stability and excellent tolerance of the methanol cross‐over effect. This simple method afforded pentabasic (Fe, B, N, S, P)‐doped rGO as a promising nonprecious metal catalyst used for alkaline fuel cells.     

Pyrolytic Carbon‐coated Cu‐Fe Alloy Nanoparticles with High Catalytic Performance for Oxygen Electroreduction

Well‐dispersed carbon‐coated or nitrogen‐doped carbon‐coated copper‐iron alloy nanoparticles (FeCu@C or FeCu@C?N) in carbon‐based supports are obtained using a bimetallic metal‐organic framework (Cu/Fe‐MOF‐74) or a mixture of Cu/Fe‐MOF‐74 and melamine as sacrificial templates and an active‐component precursor by using a pyrolysis method. The investigation results attest formation of Cu?Fe alloy nanoparticles. The obtained FeCu@C catalyst exhibits a catalytic activity with a half‐wave potential of 0.83 V for oxygen reduction reaction (ORR) in alkaline medium, comparable to that on commercial Pt/C catalyst (0.84 V). The catalytic activity of FeCu@C?N for ORR (E_half‐wave=0.87 V) outshines all reported analogues. The excellent performance of FeCu@C?N should be attributed to a change in the energy of the d‐band center of Cu resulting from the formation of the copper–iron alloy, the interaction between alloy nanoparticles and supports and N‐doping in the carbon matrix. Moreover, FeCu@C and FeCu@C?N show better electrochemical stability and methanol tolerance than commercial Pt/C and are expected to be widely used in practical applications.     

Synthesis and characterization of iron‐ and nitrogen‐functionalized graphene catalysts for oxygen reduction reaction

Iron‐ and nitrogen‐functionalized graphene (Fe‐N‐G), as well as iron‐ and nitrogen‐functionalized oxidized graphene (Fe‐N‐Gox) catalysts were synthesized as non‐noble metal electrocatalysts for oxygen reduction reaction (ORR). The physical properties of the resultant catalysts were characterized using nitrogen adsorption measurements, X‐ray diffraction, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy. Subsequently, ORR activities of the catalysts were determined electrochemically using a conventional three‐electrode cell via cyclic voltammetry with a rotating disc electrode, the results of which indicated that the synthesized catalysts had a marked electrocatalytic activity towards ORR in acid media. Among the synthesized catalysts, that functionalized using 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine as nitrogen source had the highest electrocatalytic activity with the highest onset potential (0.98 V/SHE) and limiting current density (5.12 mA cm⁻²). The findings are particularly important to determine a non‐precious metal catalyst for ORR activity in fuel cells.     

Unraveling the Nature of Sites Active toward Hydrogen Peroxide Reduction in Fe‐N‐C Catalysts

Fe‐N‐C catalysts with high O₂ reduction performance are crucial for displacing Pt in low‐temperature fuel cells. However, insufficient understanding of which reaction steps are catalyzed by what sites limits their progress. The nature of sites were investigated that are active toward H₂O₂ reduction, a key intermediate during indirect O₂ reduction and a source of deactivation in fuel cells. Catalysts comprising different relative contents of FeN_x C_y moieties and Fe particles encapsulated in N‐doped carbon layers (0–100 %) show that both types of sites are active, although moderately, toward H₂O₂ reduction. In contrast, N‐doped carbons free of Fe and Fe particles exposed to the electrolyte are inactive. When catalyzing the ORR, FeN_x C_y moieties are more selective than Fe particles encapsulated in N‐doped carbon. These novel insights offer rational approaches for more selective and therefore more durable Fe‐N‐C catalysts.     

A Versatile Iron–Tannin‐Framework Ink Coating Strategy to Fabricate Biomass‐Derived Iron Carbide/Fe‐N‐Carbon Catalysts for Efficient Oxygen Reduction

The conversion of biomass into valuable carbon composites as efficient non‐precious metal oxygen‐reduction electrocatalysts is attractive for the development of commercially viable polymer electrolyte membrane fuel‐cell technology. Herein, a versatile iron–tannin‐framework ink coating strategy is developed to fabricate cellulose‐derived Fe₃C/Fe‐N‐C catalysts using commercial filter paper, tissue, or cotton as a carbon source, an iron–tannin framework as an iron source, and dicyandiamide as a nitrogen source. The oxygen reduction performance of the resultant Fe₃C/Fe‐N‐C catalysts shows a high onset potential (i.e. 0.98 V vs the reversible hydrogen electrode (RHE)), and large kinetic current density normalized to both geometric electrode area and mass of catalysts (6.4 mA cm^?2 and 32 mA mg^?1 at 0.80 V vs RHE) in alkaline condition. This method can even be used to prepare efficient catalysts using waste carbon sources, such as used polyurethane foam.     

Boosting ORR Catalytic Activity by Integrating Pyridine‐N Dopants,a High Degree of Graphitization,and Hierarchical Pores into a MOF‐Derived N‐Doped Carbon in a Tandem Synthesis

N‐doped carbon materials represent promising metal‐free electrocatalysts for the oxygen reduction reaction (ORR), the cathode reaction in fuel cells, metal–air batteries, and so on. A challenge for optimizing the ORR catalytic activities of these electrocatalysts is to tune their local structures and chemical compositions in a rational and controlled way that can achieve the synergistic function of each factor. Herein, we report a tandem synthetic strategy that integrates multiple contributing factors into an N‐doped carbon. With an N‐containing MOF (ZIF‐8) as the precursor, carbonization at higher temperatures leads to a higher degree of graphitization. Subsequent NH₃ etching of this highly graphitic carbon enabled the introduction of a higher content of pyridine‐N sites and higher porosity. By optimizing these three factors, the resultant carbon materials displayed ORR activity that was far superior to that of carbon derived from a one‐step pyrolysis. The onset potential of 0.955 V versus a reversible hydrogen electrode (RHE) and the half‐wave potential of 0.835 V versus RHE are among the top ranks of metal‐free ORR catalysts and are comparable to commercial Pt/C (20 wt %) catalysts. Kinetic studies revealed lower H₂O₂ yields, higher electron‐transfer numbers, and lower Tafel slopes for these carbon materials compared with that derived from a one‐step carbonization. These findings verify the effectiveness of this tandem synthetic strategy to enhance the ORR activity of N‐doped carbon materials.     

Ultrahigh‐Loading Zinc Single‐Atom Catalyst for Highly Efficient Oxygen Reduction in Both Acidic and Alkaline Media

Atomically dispersed Zn–N–C nanomaterials are promising platinum‐free catalysts for the oxygen reduction reaction (ORR). However, the fabrication of Zn–N–C catalysts with a high Zn loading remains a formidable challenge owing to the high volatility of the Zn precursor during high‐temperature annealing. Herein, we report that an atomically dispersed Zn–N–C catalyst with an ultrahigh Zn loading of 9.33 wt % could be successfully prepared by simply adopting a very low annealing rate of 1° min^?1. The Zn–N–C catalyst exhibited comparable ORR activity to that of Fe–N–C catalysts, and significantly better ORR stability than Fe–N–C catalysts in both acidic and alkaline media. Further experiments and DFT calculations demonstrated that the Zn–N–C catalyst was less susceptible to protonation than the corresponding Fe–N–C catalyst in an acidic medium. DFT calculations revealed that the Zn–N₄ structure is more electrochemically stable than the Fe–N₄ structure during the ORR process.     

Zeolitic Imidazolate Framework (ZIF)‐Derived,Hollow‐Core,Nitrogen‐Doped Carbon Nanostructures for Oxygen‐Reduction Reactions in PEFCs

The facile synthesis of a porous carbon material that is doped with iron‐coordinated nitrogen active sites (FeNC‐70) is demonstrated by following an inexpensive synthetic pathway with a zeolitic imidazolate framework (ZIF‐70) as a template. To emphasize the possibility of tuning the porosity and surface area of the resulting carbon materials based on the structure of the parent ZIF, two other ZIFs, that is, ZIF‐68 and ZIF‐69, are also synthesized. The resulting active carbon material that is derived from ZIF‐70, that is, FeNC‐70, exhibits the highest BET surface area of 262 m² g^?1 compared to the active carbon materials that are derived from ZIF‐68 and ZIF‐69. The HR‐TEM images of FeNC‐70 show that the carbon particles have a bimodal structure that is composed of a spherical macroscopic pore (about 200 nm) and a mesoporous shell. X‐ray photoelectron spectroscopy (XPS) reveals the presence of Fe‐N‐C moieties, which are the primary active sites for the oxygen‐reduction reaction (ORR). Quantitative estimation by using EDAX analysis reveals a nitrogen content of 14.5 wt. %, along with trace amounts of iron (0.1 wt. %), in the active FeNC‐70 catalyst. This active porous carbon material, which is enriched with Fe‐N‐C moieties, reduces the oxygen molecule with an onset potential at 0.80 V versus NHE through a pathway that involves 3.3–3.8 e^? under acidic conditions, which is much closer to the favored 4 e^? pathway for the ORR. The onset potential of FeNC‐70 is significantly higher than those of its counterparts (FeNC‐68 and FeNC‐69) and of other reported systems. The FeNC‐based systems also exhibit much‐higher tolerance towards MeOH oxidation and electrochemical stability during an accelerated durability test (ADT). Electrochemical analysis and structural characterizations predict that the active sites for the ORR are most likely to be the in situ generated N? FeN₂₊₂/C moieties, which are distributed along the carbon framework.     

Hyperporous‐Carbon‐Supported Nonprecious Metal Electrocatalysts for the Oxygen Reduction Reaction

Highly porous carbonaceous nonprecious metal catalysts for the oxygen reduction reaction are prepared by carbonization of low‐cost metalloporphyrin‐based hyper‐crosslinked polymers (MPH‐X). With high surface area (2768 m² g⁻¹), hierarchical porous structure, and high metal loading (9.97 wt %), the obtained hyperporous carbon MPH‐Fe/C catalyst exhibits high oxygen reduction reaction (ORR) activity with a half‐wave potential (0.816 V) that is comparable to the 0.819 V of commercial Pt/C. Stability tests reveal that MPH‐Fe/C also exhibits outstanding long‐term durability and methanol tolerance. Our findings may offer an alternative approach to produce nonprecious metal ORR catalysts on a large scale owing to the low‐cost MPH‐X precursors with diverse metal types.     

Atomically Dispersed Iron–Nitrogen Species as Electrocatalysts for Bifunctional Oxygen Evolution and Reduction Reactions

Rational design of non‐noble materials as highly efficient, economical, and durable bifunctional catalysts for oxygen evolution and reduction reactions (OER/ORR) is currently a critical obstacle for rechargeable metal‐air batteries. A new route involving S was developed to achieve atomic dispersion of Fe‐N_x species on N and S co‐decorated hierarchical carbon layers, resulting in single‐atom bifunctional OER/ORR catalysts for the first time. The abundant atomically dispersed Fe‐N_x species are highly catalytically active, the hierarchical structure offers more opportunities for active sites, and the electrical conductivity is greatly improved. The obtained electrocatalyst exhibits higher limiting current density and a more positive half‐wave potential for ORR, as well as a lower overpotential for OER under alkaline conditions. Moreover, a rechargeable Zn–air battery device comprising this hybrid catalyst shows superior performance compared to Pt/C catalyst. This work will open a new avenue to design advanced bifunctional catalysts for reversible energy storage and conversion devices.     

Bottom‐Up Fabrication of a Sandwich‐Like Carbon/Graphene Heterostructure with Built‐In FeNC Dopants as Non‐Noble Electrocatalyst for Oxygen Reduction Reaction

High‐performance non‐noble electrocatalysts for oxygen reduction reaction (ORR) are the prerequisite for large‐scale utilization of fuel cells. Herein, a type of sandwiched‐like non‐noble electrocatalyst with highly dispersed FeN_x active sites embedded in a hierarchically porous carbon/graphene heterostructure was fabricated using a bottom‐up strategy. The in situ ion substitution of Fe³⁺ in a nitrogen‐containing MOF (ZIF‐8) allows the Fe‐heteroatoms to be uniformly distributed in the MOF precursor, and the assembly of Fe‐doped ZIF‐8 nano‐crystals with graphene‐oxide and in situ reduction of graphene‐oxide afford a sandwiched‐like Fe‐doped ZIF‐8/graphene heterostructure. This type of heterostructure enables simultaneous optimization of FeN_x active sites, architecture and interface properties for obtaining an electron‐catalyst after a one‐step carbonization. The synergistic effect of these factors render the resulting catalysts with excellent ORR activities. The half‐wave potential of 0.88 V vs. RHE outperforms most of the none‐noble metal catalyst and is comparable with the commercial Pt/C (20 wt %) catalyst. Apart from the high activity, this catalyst exhibits excellent durability and good methanol‐tolerance. Detailed investigations demonstrate that a moderate content of Fe dopants can effectively increase the intrinsic activities, and the hybridization of graphene can enhance the reaction kinetics of ORR. The strategy proposed in this work gives an inspiration towards developing efficient noble‐metal‐free electrocatalysts for ORR.     

The Direct Electron Transfer of Iron‐Containing Superoxide Dismutase (Fe‐SOD) and its Catalysis for the Oxygen Reduction Reaction (ORR) in Room Temperature Ionic Liquids (RTILs) on a Gold Electrode

In this work, for the first time, the direct electron transfer of iron‐containing superoxide dismutase (Fe‐SOD) was observed by cyclic voltammetry on a gold (Au) electrode in three RTILs, i.e., 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄), 1‐n‐propyl‐3‐methylimidazolium tetrafluoroborate (PMIBF₄) and 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIBF₄). And the results demonstrate that when the scan rate was as low as 1 mV/s, a pair of well‐defined quasi‐reversible peaks of Fe‐SOD was presented, while as the potential scan rate was above 10 mV/s, the reduction peak of Fe‐SOD disappeared though its oxidation peak could be clearly observed even as the potential scan rate was up to 400 mV/s, strongly indicating that these CVs we observed were attributable to Fe‐SOD rather than the impurities in RTILs. Its catalysis for oxygen reduction reaction (ORR) was directly verified by the shifting of formal potential, E⁰′, of ORR, to the positive direction though the value of standard rate constant, κ⁰, corresponding to ORR, was not much enhanced. In PMIBF₄, for the multi‐walled carbon nanotubes (MWCNTs)‐modified gold electrode, both the reduction peak current and oxidation peak current for oxygen redox reaction were all dramatically enhanced compared to the case of a bare gold electrode, and the value of κ⁰ was also increased from 3.1 × 10^?3 cm s^?1 for the bare gold electrode, to 17.5 × 10^?3 cm s^?1. Hence, in the presence of Fe‐SOD in RTILs, MWCNTs, showing catalysis for the electron transfer process of ORR, coupled with Fe‐SOD, leading to the shifting of formal potential corresponding to ORR to the positive direction, presented us a satisfactory catalysis for ORR in RTILs. Some reasons available for this catalysis behavior stemming from Fe‐SOD, and MWCNTs as well, for ORR are discussed based on the previously developed proposition.     

Metal Phthalocyanine‐Porphyrin‐based Conjugated Microporous Polymer‐derived Bifunctional Electrocatalysts for Zn‐Air Batteries

Conjugated microporous polymers (CMPs) as emerging porous materials with diverse structures and tunable building‐units have attracted much attention in the electrochemical field. Herein, we designed phthalocyanine‐porphyrin‐based conjugated microporous polymers as precursors for fabrication of Co, Fe, N tri‐doped graphene composites towards oxygen reduction and evolution reaction (ORR/OER). As expected, the elements cobalt and iron are well dispersed in graphene carbon and interact with the nitrogen sites, thereby providing extra electrocatalytic active sites and enhancing its overall conductivity. Benefiting from its unique design and structure, the obtained catalyst affords a superior bifunctional catalytic activity with a positive onset potential of 0.957 V for ORR, and a low overpotential of 0.36 V for OER. More attractively, the CoFeNG is employed as an air cathode catalyst in Zn‐air batteries, showing a maximum current density of 215 mA cm^?2 and good cycle stability for 20000 s. The rational design of phthalocyanine‐porphyrin‐based derivatives provides a feasible route for the construction of high‐performance ORR/OER catalysts.     

Iron promotion of V‐HMS mesoporous catalysts for ultra‐deep oxidative desulfurization

Bimetallic Fe‐V‐HMS (HMS, hexagonal mesoporous silica) catalysts with various molar ratios of iron to vanadium were synthesized using a co‐synthesis method, and investigated for oxidative desulfurization of dibenzothiophene (DBT) using tert‐butyl hydroperoxide as an oxidant. The catalysts were characterized using X‐ray diffraction, temperature‐programmed desorption of ammonia, Fourier transform infrared spectroscopy and N₂ physical adsorption–desorption techniques. The Fe‐V‐HMS catalyst with a 2:1 molar ratio of iron to vanadium exhibited the highest total acidity and the highest catalytic activity. DBT was almost completely oxidized to dibenzothiophenesulfone, a species with a higher polarity that could be subsequently adsorbed on the Fe‐V‐HMS, and therefore the Fe‐V‐HMS acts as both a catalyst and an adsorbent simultaneously. The desulfurization rate was 98.1%. A pseudo‐first‐order model was fitted to the experimental data, and the activation energy was found to be 38.79 kJ mol^?1. The encouraging performance of Fe‐V‐HMS offers the prospect of the design of a one‐pot oxidative desulfurization process without needing extraction of sulfones from fuel oil with a chemical solvent.