A Novel d‐Peptide Identified by Mirror‐Image Phage Display Blocks TIGIT/PVR for Cancer Immunotherapy

The low response rate and adaptive resistance of PD‐1/PD‐L1 blockade demands the studies on novel therapeutic targets for cancer immunotherapy. We discovered that a novel immune checkpoint TIGIT expressed higher than PD‐1 in many tumors especially anti‐PD‐1 resistant tumors. Here, mirror‐image phage display bio‐panning was performed using the d ‐enantiomer of TIGIT synthesized by hydrazide‐based native chemical ligation. d ‐peptide ^DTBP‐3 was identified, which could occupy the binding interface and effectively block the interaction of TIGIT with its ligand PVR. ^DTBP‐3 showed proteolytic resistance, tumor tissue penetrating ability, and significant tumor suppressing effects in a CD8⁺ T cell dependent manner. More importantly, ^DTBP‐3 could inhibit tumor growth and metastasis in anti‐PD‐1 resistant tumor model. This is the first d ‐peptide targeting TIGIT, which could serve as a potential candidate for cancer immunotherapy.     

Homogeneous,Low‐volume,Efficient, and Sensitive Quantitation of Circulating Exosomal PD‐L1 for Cancer Diagnosis and Immunotherapy Response Prediction

Immunotherapy has revolutionized cancer treatment, but its efficacy is severely hindered by the lack of effective predictors. Herein, we developed a homogeneous, low‐volume, efficient, and sensitive exosomal programmed death‐ligand 1 (PD‐L1, a type of transmembrane protein) quantitation method for cancer diagnosis and immunotherapy response prediction (HOLMES‐Exo_PD‐L1). The method combines a newly evolved aptamer that efficiently binds to PD‐L1 with less hindrance by antigen glycosylation than antibody, and homogeneous thermophoresis with a rapid binding kinetic. As a result, HOLMES‐Exo_PD‐L1 is higher in sensitivity, more rapid in reaction time, and easier to operate than existing enzyme‐linked immunosorbent assay (ELISA)‐based methods. As a consequence of an outstanding improvement of sensitivity, the level of circulating exosomal PD‐L1 detected by HOLMES‐Exo_PD‐L1 can effectively distinguish cancer patients from healthy volunteers, and for the first time was found to correlate positively with the metastasis of adenocarcinoma. Overall, HOLMES‐Exo_PD‐L1 brings a fresh approach to exosomal PD‐L1 quantitation, offering unprecedented potential for early cancer diagnosis and immunotherapy response prediction.     

A D‐Peptide Ligand of Nicotine Acetylcholine Receptors for Brain‐Targeted Drug Delivery

Lysosomes of brain capillary endothelial cells are implicated in nicotine acetylcholine receptor (nAChR)‐mediated transcytosis and act as an enzymatic barrier for the transport of peptide ligands to the brain. A D ‐peptide ligand of nAChRs (termed ^DCDX), which binds to nAChRs with an IC₅₀ value of 84.5 nM , was developed by retro–inverso isomerization. ^DCDX displayed exceptional stability in lysosomal homogenate and serum, and demonstrated significantly higher transcytosis efficiency in an in vitro blood–brain barrier monolayer compared with the parent L ‐peptide. When modified on liposomal surface, ^DCDX facilitated significant brain‐targeted delivery of liposomes. As a result, brain‐targeted delivery of ^DCDX modified liposomes enhanced therapeutic efficiency of encapsulated doxorubicin for glioblastoma. This study illustrates the importance of ligand stability in nAChRs‐mediated transcytosis, and paves the way for developing stable brain‐targeted entities.     

Differentiation of Boc‐protected α,δ‐/δ,α‐ and β,δ‐/δ,β‐hybrid peptide positional isomers by electrospray ionization tandem mass spectrometry

Two new series of Boc‐N‐α,δ‐/δ,α‐ and β,δ‐/δ,β‐hybrid peptides containing repeats of L ‐Ala‐δ⁵‐Caa/δ⁵‐Caa‐L ‐Ala and β³‐Caa‐δ⁵‐Caa/δ⁵‐Caa‐β³‐Caa (L ‐Ala = L ‐alanine, Caa = C‐linked carbo amino acid derived from D ‐xylose) have been differentiated by both positive and negative ion electrospray ionization (ESI) ion trap tandem mass spectrometry (MS/MS). MSⁿ spectra of protonated isomeric peptides produce characteristic fragmentation involving the peptide backbone, the Boc‐group, and the side chain. The dipeptide positional isomers are differentiated by the collision‐induced dissociation (CID) of the protonated peptides. The loss of 2‐methylprop‐1‐ene is more pronounced for Boc‐NH‐L ‐Ala‐δ‐Caa‐OCH₃ (1), whereas it is totally absent for its positional isomer Boc‐NH‐δ‐Caa‐L ‐Ala‐OCH₃ (7), instead it shows significant loss of t‐butanol. On the other hand, second isomeric pair shows significant loss of t‐butanol and loss of acetone for Boc‐NH‐δ‐Caa‐β‐Caa‐OCH₃ (18), whereas these are insignificant for its positional isomer Boc‐NH‐β‐Caa‐δ‐Caa‐OCH₃ (13). The tetra‐ and hexapeptide positional isomers also show significant differences in MS² and MS³ CID spectra. It is observed that ‘b’ ions are abundant when oxazolone structures are formed through five‐membered cyclic transition state and cyclization process for larger ‘b’ ions led to its insignificant abundance. However, b₁⁺ ion is formed in case of δ,α‐dipeptide that may have a six‐membered substituted piperidone ion structure. Furthermore, ESI negative ion MS/MS has also been found to be useful for differentiating these isomeric peptide acids. Thus, the results of MS/MS of pairs of di‐, tetra‐, and hexapeptide positional isomers provide peptide sequencing information and distinguish the positional isomers. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of poly(ethylene glycol)/polypeptide/poly(D,L‐lactide) copolymers and their nanoparticles

Core‐shell structured nanoparticles of poly(ethylene glycol) (PEG)/polypeptide/poly(D ,L ‐lactide) (PLA) copolymers were prepared and their properties were investigated. The copolymers had a poly(L ‐serine) or poly(L ‐phenylalanine) block as a linker between a hydrophilic PEG and a hydrophobic PLA unit. They formed core‐shell structured nanoparticles, where the polypeptide block resided at the interface between a hydrophilic PEG shell and a hydrophobic PLA core. In the synthesis, poly(ethylene glycol)‐b‐poly(L ‐serine) (PEG‐PSER) was prepared by ring opening polymerization of N‐carboxyanhydride of O‐(tert‐butyl)‐L ‐serine and subsequent removal of tert‐butyl groups. Poly(ethylene glycol)‐b‐poly(L ‐phenylalanine) (PEG‐PPA) was obtained by ring opening polymerization of N‐carboxyanhydride of L ‐phenylalanine. Methoxy‐poly(ethylene glycol)‐amine with a MW of 5000 was used as an initiator for both polymerizations. The polymerization of D ,L ‐lactide by initiation with PEG‐PSER and PEG‐PPA produced a comb‐like copolymer, poly(ethylene glycol)‐b‐[poly(L ‐serine)‐g‐poly(D ,L ‐lactide)] (PEG‐PSER‐PLA) and a linear copolymer, poly(ethylene glycol)‐b‐poly(L ‐phenylalanine)‐b‐poly(D ,L ‐lactide) (PEG‐PPA‐PLA), respectively. The nanoparticles obtained from PEG‐PPA‐PLA showed a negative zeta potential value of ?16.6 mV, while those of PEG‐PSER‐PLA exhibited a positive value of about 19.3 mV. In pH 7.0 phosphate buffer solution at 36 °C, the nanoparticles of PEG/polypeptide/PLA copolymers showed much better stability than those of a linear PEG‐PLA copolymer having a comparable molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of star‐shaped poly(D,L‐lactic acid‐alt‐glycolic acid)‐b‐poly(L‐lactic acid) with the poly(D,L‐lactic acid‐alt‐glycolic acid) macroinitiator and stannous octoate catalyst

Two types of three‐arm and four‐arm, star‐shaped poly(D,L ‐lactic acid‐alt‐glycolic acid)‐b‐poly(L ‐lactic acid) (D,L ‐PLGA50‐b‐PLLA) were successfully synthesized via the sequential ring‐opening polymerization of D,L ‐3‐methylglycolide (MG) and L ‐lactide (L ‐LA) with a multifunctional initiator, such as trimethylolpropane and pentaerythritol, and stannous octoate (SnOct₂) as a catalyst. Star‐shaped, hydroxy‐terminated poly(D,L ‐lactic acid‐alt‐glycolic acid) (D,L ‐PLGA50) obtained from the polymerization of MG was used as a macroinitiator to initiate the block polymerization of L ‐LA with the SnOct₂ catalyst in bulk at 130 °C. For the polymerization of L ‐LA with the three‐arm, star‐shaped D,L ‐PLGA50 macroinitiator (number‐average molecular weight = 6800) and the SnOct₂ catalyst, the molecular weight of the resulting D,L ‐PLGA50‐b‐PLLA polymer linearly increased from 12,600 to 27,400 with the increasing molar ratio (1:1 to 3:1) of L ‐LA to MG, and the molecular weight distribution was rather narrow (weight‐average molecular weight/number‐average molecular weight = 1.09–1.15). The ¹H NMR spectrum of the D,L ‐PLGA50‐b‐PLLA block copolymer showed that the molecular weight and unit composition of the block copolymer were controlled by the molar ratio of L ‐LA to the macroinitiator. The ¹³C NMR spectrum of the block copolymer clearly showed its diblock structures, that is, D,L ‐PLGA50 as the first block and poly(L ‐lactic acid) as the second block. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 409–415, 2002     

Imidazole‐initiated polymerizations of α‐amino acid N‐carboxyanhydrides – simultaneous chain‐growth and step‐growth polymerization

The N‐carboxyanhydrides (NCAs) of sarcosine (Sar), D ,L ‐leucine (D ,L ‐Leu), D ,L ‐phenylalanine (D ,L ‐Phe), and L ‐alanine (L ‐Ala) were polymerized in dioxane. Imidazole served as initiator and the NCA/initiator ratio was varied from 1/1 to 40/1. The isolated polypeptides were characterized by ¹H NMR spectroscopy, by MALDI‐TOF mass spectrometry, by viscosity measurements, and by SEC measurements in the case of poly(sarcosine). Cyclic oligopeptides were found in all reaction products and in the case of polySar, poly(D ,L ‐Leu), and poly(D ,L ‐Phe) the cycles were the main products. In the case of poly(L ‐Ala), rapid precipitation of β‐sheet lamellaes prevented efficient cyclizations and stabilized imidazolide endgroups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5690–5698, 2005     

The Propensity of α‐Aminoisobutyric Acid (=2‐Methylalanine; Aib) to Induce Helical Secondary Structure in an α‐Heptapeptide: A Computational Study

We present a molecular‐dynamics simulation study of an α‐heptapeptide containing an α‐aminoisobutyric acid (=2‐methylalanine; Aib) residue, Val¹‐Ala²‐Leu³‐Aib⁴‐Ile⁵‐Met⁶‐Phe⁷, and a quantum‐mechanical (QM) study of simplified models to investigate the propensity of the Aib residue to induce 3₁₀/α‐helical conformation. For comparison, we have also performed simulations of three analogues of the peptide with the Aib residue being replaced by L ‐Ala, D ‐Ala, and Gly, respectively, which provide information on the subtitution effect at C(α) (two Me groups for Aib, one for L ‐Ala and D ‐Ala, and zero for Gly). Our simulations suggest that, in MeOH, the heptapeptide hardly folds into canonical helical conformations, but appears to populate multiple conformations, i.e., C₇ and 3₁₀‐helical ones, which is in agreement with results from the QM calculations and NMR experiments. The populations of these conformations depend on the polarity of the solvent. Our study confirms that a short peptide, though with the presence of an Aib residue in the middle of the chain, does not have to fold to an α‐helical secondary structure. To generate a helical conformation for a linear peptide, several Aib residues should be present in the peptide, either sequentially or alternatively, to enhance the propensity of Aib‐containing peptides towards the helical conformation. A correction of a few of the published NMR data is reported.     

β‐Hairpins Generated from Hybrid Peptide Sequences Containing both α‐ and β‐Amino Acids

The incorporation of the β‐amino acid residues into specific positions in the strands and β‐turn segments of peptide hairpins is being systematically explored. The presence of an additional torsion variable about the C(α) C(β) bond (θ) enhances the conformational repertoire in β‐residues. The conformational analysis of three designed peptide hairpins composed of α/β‐hybrid segments is described: Boc‐Leu‐Val‐Val‐^DPro‐β Phe ‐Leu‐Val‐Val‐OMe ( 1 ), Boc‐Leu‐Val‐β Val ‐^DPro‐Gly‐β Leu ‐Val‐Val‐OMe ( 2 ), and Boc‐Leu‐Val‐β Phe ‐Val‐^DPro‐Gly‐Leu‐β Phe ‐Val‐Val‐OMe ( 3 ). 500‐MHz ¹H‐NMR Analysis supports a preponderance of β‐hairpin conformation in solution for all three peptides, with critical cross‐strand NOEs providing evidence for the proposed structures. The crystal structure of peptide 2 reveals a β‐hairpin conformation with two β‐residues occupying facing, non‐H‐bonded positions in antiparallel β‐strands. Notably, βVal(3) adopts a gauche conformation about the C(α) C(β) bond (θ=+65°) without disturbing cross‐strand H‐bonding. The crystal structure of 2 , together with previously published crystal structures of peptides 3 and Boc‐β Phe ‐β Phe ‐^DPro‐Gly‐β Phe ‐β Phe ‐OMe, provide an opportunity to visualize the packing of peptide sheets with local ‘polar segments' formed as a consequence of reversal peptide‐bond orientation. The available structural evidence for hairpins suggests that β‐residues can be accommodated into nucleating turn segments and into both the H‐bonding and non‐H‐bonding positions on the strands.     

The 5‐Methylisocytosine β‐D‐Ribopyranosyl (4′ → 2′)‐Oligonucleotide

In the context of Eschenmoser's work on pyranosyl‐RNA (‘p‐RNA’), we investigated the synthesis and base‐pairing properties of the 5‐methylisocytidine derivative. The previously determined clear‐cut restrictions of base‐pairing modes of p‐RNA had led to the expectation that a 5‐methylisocytosine β‐D ‐ribopyranosyl (= D ‐pr(^MeisoC)) based (4′ → 2′)‐oligonucleotide would pair inter alia with D ‐pr(isoG) and L ‐pr(G) based oligonucleotides (D ‐pr and L ‐pr = pyranose form of D ‐ and L ‐ribose, resp.). Remarkably, we could not observe pairing with the D ‐pr(isoG) oligonucleotide but only with the L ‐pr(G) oligonucleotide. Our interpretation concludes that this – at first hand surprising – observation is caused by a change in the nucleosidic torsion angle specific for isoC.     

The self‐assembled of cyclic D,L‐α‐peptide systems: Insights into the structure and energetics

Cyclic D,L ‐α‐peptides are able to self‐assemble to nanotubes, although the inherent reason of the stability of this kind of nanotube as well as the intrinsic driving force of self‐assembly of the cyclic D ,L ‐α‐peptides still remain elusive. In this work, using several computational approaches, we investigated the structural and energy characteristics of a series of cyclo[(‐L ‐Phe‐D ‐Ala‐)₄] and cyclo[(‐L ‐Ala‐D ‐Ala‐)₄] oligomers. The results reveal that the thermodynamic stability, cooperativity, and self‐assembly patterns of cyclic D ,L ‐α‐peptide nanotubes are mainly determined by the interactions between cross‐strand side chains instead of those between backbones. For cyclo[(‐L ‐Phe‐D ‐Ala‐)₄] oligomers, the steric interaction between cross‐strand side chains, especially the electrostatic repulsion between the phenyls in Phe residues, brings anticooperative effect into parallel stacking mode, which is responsible for the preference of self‐assembling nanotube in antiparallel vs. parallel stacking orientation. Based on our results, a novel self‐assembling mechanism is put forward—it is the L ‐L antiparallel dimer of cyclo[(‐L ‐Phe‐D ‐Ala‐)₄], instead of the commonly presumed monomer, that acts as the basic building block in self assembly. It explains why these cyclic peptides uniquely self‐assemble to form antiparallel nanotubes. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Toward direct determination of conformations of protein building units from multidimensional NMR experiments I. A theoretical case study of For‐Gly‐NH2 and For‐L‐Ala‐NH2

NMR chemical shielding anisotropy tensors have been computed, employing several basis sets and the GIAO‐RHF and GIAO‐MP2 formalisms of electronic structure theory, for all the atoms of the five and nine typical backbone conformers of For‐Gly‐NH₂ and For‐L ‐Ala‐NH₂, respectively. Multidimensional chemical shift plots, as a function of the respective backbone fold, have been generated for both peptide models. On the 2D ¹H^NH‐¹⁵N^NH and ¹⁵N^NH‐¹³C^α plots the most notable feature is that at all levels of theory studied the backbone conformers cluster in different regions. Computed chemical shifts, as well as their averages, have been compared to relevant experimental values taken from the BioMagnetic Resonance Bank (BMRB). At the highest levels of theory, for all nuclei but the amide protons, deviations between statistically averaged theoretical and experimental shifts are as low as 1–3%. These results indicate that chemical shift information from selected multiple‐pulse NMR experiments (e.g., 2D‐HSQC and 3D‐HNCA) could directly be employed to extract folding information for polypeptides and proteins. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 882–900, 2000     

7‐Iodo‐5‐aza‐7‐deazaguanine: Syntheses of Anomeric D‐ and L‐Configured 2‐Deoxyribonucleosides

Iodination of N²‐isobutyryl‐5‐aza‐7‐deazaguanine ( 7 ) with N‐iodosuccinimide (NIS) gave 7‐iodo‐N²‐isobutyryl‐5‐aza‐7‐deazaguanine ( 8 ) in a regioselective reaction (Scheme 1). Nucleobase‐anion glycosylation of 8 with 2‐deoxy‐3,5‐di‐O‐toluoyl‐α‐D ‐ or α‐L ‐erythro‐pentofuranosyl chloride furnished anomeric mixtures of D ‐ and L ‐nucleosides. The anomeric D ‐nucleosides were separated by crystallization to give the α‐D ‐anomer and β‐D ‐anomer with excellent optical purity. Deprotection gave the 7‐iodo‐5‐aza‐7‐deazaguanine 2′‐deoxyribonucleosides 3 (β‐D ; ≥99% de) and 4 (α‐D ; ≥99% de). The reaction sequence performed with the D ‐series was also applied to L ‐nucleosides to furnish compounds 5 (β‐L ; ≥99% de) and 6 (α‐L ; ≥95% de).     

cis‐trans Peptide‐Bond Isomerization in α‐Methylproline Derivatives

α‐Methyl‐L ‐proline is an α‐substituted analog of proline that has been previously employed to constrain prolyl peptide bonds in a trans conformation. Here, we revisit the cis‐trans prolyl peptide bond equilibrium in derivatives of α‐methyl‐L ‐proline, such as N‐Boc‐protected α‐methyl‐L ‐proline and the hexapeptide H‐Ala‐Tyr‐αMePro‐Tyr‐Asp‐Val‐OH. In Boc‐α‐methyl‐L ‐proline, we found that both cis and trans conformers were populated, whereas, in the short peptide, only the trans conformer was detected. The energy barrier for the cis‐trans isomerization in Boc‐α‐methyl‐L ‐proline was determined by line‐shape analysis of NMR spectra obtained at different temperatures and found to be 1.24 kcal/mol (at 298 K) higher than the corresponding value for Boc‐L ‐proline. These findings further illuminate the conformationally constraining properties of α‐methyl‐L ‐proline.     

Synthesis of poly(D,L‐lactic acid‐alt‐glycolic acid) from D,L‐3‐methylglycolide

D ,L ‐3‐Methylglycolide (MG) was synthesized via two step reactions with a good yield (42%). It was successfully polymerized in bulk with stannous octoate as a catalyst at 110 °C. The effects of the polymerization time and catalyst concentration on the molecular weight and monomer conversion were studied. Poly(D ,L ‐lactic acid‐co‐glycolic acid) (D ,L ‐PLGA50; 50/50 mol/mol) copolymers were successfully synthesized from the homopolymerization of MG with high polymerization rates and high monomer conversions under moderate polymerization conditions. ¹H NMR spectroscopy indicated that the bulk ring‐opening polymerization of MG conformed to the coordination–insertion mechanism. ¹³C NMR spectra of D ,L ‐PLGA50 copolymers obtained under different experimental conditions revealed that the copolymers had alternating structures of lactyl and glycolyl. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4179–4184, 2000     

Four new ursane‐type saponins from Morina nepalensis var. alba

Four new ursane‐type saponins, monepalosides C–F, together with a known saponin, mazusaponin II, were isolated from Morina nepalensis var. alba Hand.‐Mazz. Their structures were determined to be 3‐O‐α‐L ‐arabinopyranosyl‐(1 → 3)‐&[alpha;‐L ‐rhamnopyranosyl‐(1 → 2)]‐α‐L ‐arabinopyranosylpomolic acid 28‐O‐β‐D ‐glucopyranosyl‐(1 → 6)‐β‐D ‐glucopyranoside (monepaloside C, 1 ), 3‐O‐α‐L ‐arabinopyranosyl‐(1 → 3)‐&[alpha;‐L ‐rhamnopyranosyl‐(1 → 2)]‐β‐D ‐xylopyranosylpomolic acid 28‐O‐β‐D ‐glucopyranosyl‐(1 → 6)‐β‐D ‐glucopyranoside (monepaloside D, 2 ), 3‐O‐α‐L ‐arabinopyranosyl‐(1 → 3)‐&[beta;‐D ‐glucopyranosy‐(1 → 2)]‐α‐L ‐arabinopyranosylpomolic acid 28‐O‐β‐D ‐glucopyranosyl‐(1 → 6)‐β‐D ‐glucopyranoside (monepaloside E, 3 ) and 3‐O‐β‐D ‐xylopyranosylpomolic acid 28‐O‐β‐D ‐glucopyranoside (monepaloside F, 4 ) on the basis of chemical and spectroscopic evidence. 2D NMR techniques, including ¹H–¹H COSY, HMQC, 2D HMQC‐TOCSY, HMBC and ROESY, and selective excitation experiments, including SELTOCSY and SELNOESY, were utilized in the structure elucidation and complete assignments of ¹H and ¹³C NMR spectra. Copyright © 2002 John Wiley & Sons, Ltd.     

A New Route for Preparation of 5‐Deoxy‐5‐(hydroxyphosphinyl)‐ D‐mannopyranose and ‐L‐gulopyranose Derivatives

Starting from methyl 2,3‐O‐isopropylidene‐α‐D ‐mannofuranoside ( 5 ), methyl 6‐O‐benzyl‐2,3‐O‐isopropylidene‐α‐D ‐lyxo‐hexofuranosid‐5‐ulose ( 12 ) was prepared in three steps. The addition reaction of dimethyl phosphonate to 12 , followed by deoxygenation of 5‐OH group, provided the 5‐deoxy‐5‐dimethoxyphosphinyl‐α‐D ‐mannofuranoside derivative 15a and the β‐L ‐gulofuranoside isomer 15b . Reduction of 15a and 15b with sodium dihydrobis(2‐methoxyethoxy)aluminate, followed by the action of HCl and then H₂O₂, afforded the D ‐mannopyranose ( 17 ) and L ‐gulopyranose analog 21 , each having a phosphinyl group in the hemiacetal ring. These were converted to the corresponding 1,2,3,4,6‐penta‐O‐acetyl‐5‐methoxyphosphinyl derivatives 19 and 23 , respectively, structures and conformations (⁴C₁ or ¹C₄, resp.) of which were established by ¹H‐NMR spectroscopy.     

(Quasi‐)Racemic X‐ray Structures of Glycosylated and Non‐Glycosylated Forms of the Chemokine Ser‐CCL1 Prepared by Total Chemical Synthesis

Our goal was to obtain the X‐ray crystal structure of the glycosylated chemokine Ser‐CCL1. Glycoproteins can be hard to crystallize because of the heterogeneity of the oligosaccharide (glycan) moiety. We used glycosylated Ser‐CCL1 that had been prepared by total chemical synthesis as a homogeneous compound containing an N‐linked asialo biantennary nonasaccharide glycan moiety of defined covalent structure. Facile crystal formation occurred from a quasi‐racemic mixture consisting of glycosylated L ‐protein and non‐glycosylated‐D ‐protein, while no crystals were obtained from the glycosylated L ‐protein alone. The structure was solved at a resolution of 2.6–2.1 Å. However, the glycan moiety was disordered: only the N‐linked GlcNAc sugar was well‐defined in the electron density map. A racemic mixture of the protein enantiomers L ‐Ser‐CCL1 and D ‐Ser‐CCL1 was also crystallized, and the structure of the true racemate was solved at a resolution of 2.7–2.15 Å. Superimposition of the structures of the protein moieties of L ‐Ser‐CCL1 and glycosylated‐L ‐Ser‐CCL1 revealed there was no significant alteration of the protein structure by N‐glycosylation.     

Flavonol Glycosides with α‐Glucosidase Inhibitory Activities and New Flavone C‐Diosides from the Leaves of Machilus konishii

Seventeen flavonoids, five of which are flavone C‐diosides, 1 – 5 , were isolated from the BuOH‐ and AcOEt‐soluble fractions of the leaf extract of Machilus konishii. Among 1 – 5 , apigenin 6‐C‐β‐D ‐xylopyranosyl‐2″‐O‐β‐D ‐glucopyranoside ( 2 ), apigenin 8‐C‐α‐L ‐arabinopyranosyl‐2″‐O‐β‐D ‐glucopyranoside ( 4 ), and apigenin 8‐C‐β‐D ‐xylopyranosyl‐2″‐O‐β‐D ‐glucopyranoside ( 5 ) are new. Both 4 and 5 are present as rotamer pairs. The structures of the new compounds were elucidated on the basis of NMR‐spectroscopic analyses and MS data. In addition, the ¹H‐ and ¹³C‐NMR data of apigenin 6‐C‐α‐L ‐arabinopyranosyl‐2″‐O‐β‐D ‐glucopyranoside ( 3 ) were assigned for the first time. The isolated compounds were assayed against α‐glucosidase (type IV from Bacillus stearothermophilus). Kaempferol 3‐O‐(2‐β‐D ‐apiofuranosyl)‐α‐L ‐rhamnopyranoside ( 12 ) was found to possess the best inhibitory activity with an IC₅₀ value of 29.3 μM .