Moisture‐Resistant Mn4+‐Doped Core–Shell‐Structured Fluoride Red Phosphor Exhibiting High Luminous Efficacy for Warm White Light‐Emitting Diodes

K₂TiF₆:Mn⁴⁺ is a highly efficient narrow‐band emission red phosphor with promising applications in white light‐emitting diodes (LEDs) and wide‐gamut displays. Nevertheless, the poor moisture‐resistant properties of this material hinder commercialization. A convenient reverse cation‐exchange strategy is introduced for constructing a core–shell‐structured K₂TiF₆:Mn⁴⁺@K₂TiF₆ phosphor. The outer K₂TiF₆ shell acts as a shield for preventing moisture in the air from hydrolyzing the internal MnF₆^2? group, while effectively cutting off the path of energy migration to surface defects, thereby increasing the emission efficiency (especially for the phosphors doped with high concentrations of Mn⁴⁺). Employed as a red phosphor, the packaged white LED exhibits an extraordinarily high luminous efficacy of 162 lm W^?1, a correlated color temperature (CCT) of 3510 K, and a color rendering index of 93 (R_a). Aging tests performed on this device at 85 °C and 85 % humidity for 480 h retain up to 89 % luminous efficacy. The findings could facilitate commercial application of K₂TiF₆:Mn⁴⁺@K₂TiF₆ phosphor.     

Color Point Tuning in Lu3−x−yMnxAl5−xSixO12:yCe3+ for White LEDs

A series of the solid‐solution phosphors Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ is synthesized by solid‐state reaction. The obtained phosphors possess the garnet structure and exhibit similar excitation properties as the phosphor Lu₃Al₅O₁₂:Ce³⁺, but with an effectively improved red component in the emission spectrum. This can be attributed to the energy transfer from Ce³⁺ to Mn²⁺. Our investigation reveals that electric dipole–quadrupole interactions dominate the energy‐transfer mechanism and that the critical distance determined by the spectral overlap method is about 9.21 Å. The color‐tunable emissions of the Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ phosphor as a function of Mn₃Al₂Si₃O₁₂ content are realized by continuously shifting the chromaticity coordinates from (0.354, 0.570) to (0.462, 0.494). They indicate that the obtained material may have potential application as a blue radiation‐converting phosphor for white LEDs with high‐quality white light.     

Eu2+ & Mn2+‐Coactivated Ba3Gd(PO4)3 Orange‐Yellow‐Emitting Phosphor with Tunable Color Tone for UV‐Excited White LEDs

A novel orange‐yellow‐emitting Ba₃Gd(PO₄)₃:x Eu²⁺,y Mn²⁺ phosphor is prepared by high‐temperature solid‐state reaction. The crystal structure of Ba₃Gd(PO₄)₃:0.005 Eu²⁺,0.04 Mn²⁺ is determined by Rietveld refinement analysis on powder X‐ray diffraction data, which shows that the cations are disordered on a single crystallographic site and the oxygen atoms are distributed over two partially occupied sites. The photoluminescence excitation spectra show that the developed phosphor has an efficient broad absorption band ranging from 230 to 420 nm, perfectly matching the characteristic emission of UV‐light emitting diode (LED) chips. The emission spectra show that the obtained phosphors possess tunable color emissions from yellowish‐green through yellow and ultimately to reddish‐orange by simply adjusting the Mn²⁺ content (y) in Ba₃Gd(PO₄)₃:0.005 Eu²⁺,y Mn²⁺ host. The tunable color emissions origin from the change in intensity between the 4f–5d transitions in the Eu²⁺ ions and the ⁴T₁‐⁶A₁ transitions of the Mn²⁺ ions through the energy transfer from the Eu²⁺ to the Mn²⁺ ions. In addition, the mechanism of the energy transfer between the Eu²⁺ and Mn²⁺ ions are also studied in terms of the Inokuti–Hirayama theoretical model. The present results indicate that this novel orange‐yellow‐emitting phosphor can be used as a potential candidate for the application in white LEDs.     

Single-phased white-light emitting CaAl<Subscript>2</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>: Eu<Superscript>2+</Superscript>, Mn<Superscript>2+</Superscript> phosphors prepared by a sol–gel method

CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors have been prepared by a sol–gel method. X-ray diffractometer, spectrofluorometer and UV–Vis spectrometer were used to characterize structural and optical properties of the samples. The results indicate that anorthite (CaAl₂Si₂O₈) directly crystallizes at 1000 °C in the sol–gel process. CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors show two emission bands excited by ultraviolet light. Blue (around 415 nm) and yellow (around 575 nm) emissions originate from Eu²⁺ and Mn²⁺, respectively. With appropriate tuning of Mn²⁺ content, CaAl₂Si₂O₈: Eu²⁺, Mn²⁺ phosphors exhibit different hues and relative color temperatures.     

Designing ultra-highly efficient Mn2+-activated Zn2GeO4 green-emitting persistent phosphors toward versatile applications

Developing highly efficient green-emitting phosphors is very significant because human eyes are sensitive to green spectral region. Herein, Mn²⁺-activated Zn₂GeO₄ phosphors, which can emit bright green light with an ultrahigh internal quantum efficiency of 98.5%, were prepared by a solid-state reaction technology in ambient atmosphere. At 323 nm irradiation, the emission spectrum shows a narrow band centered at 534 nm, which is ascribed to the ⁴T₁ → ⁶A₁ transition of Mn²⁺, with a full width at half maxima of 49.5 nm. Through monitoring the temperature-dependent photoluminescence emission intensity and decay time of Mn²⁺, we explored the thermometric properties of the resultant compound and found maximum relative sensitivities of Zn₂GeO₄:0.02Mn²⁺ phosphor are 4.90% K^?1 and 0.74% K^?1, respectively. Furthermore, green afterglow phenomenon is observed in the designed phosphors, and its mechanism is verified by discussing the thermoluminescence. Because of the excellent luminescence behaviors, various multimode luminescent patterns for information encryption are designed, including anticounterfeiting and fingerprint identification. Furthermore, using the prepared Zn₂GeO₄:0.02Mn²⁺ as green-emitting components, a white-light-emitting diode with suitable color coordinates, high color rending index (>90), and low correlated color temperature (5,000–6,000 K) was fabricated. These results demonstrate that Mn²⁺-activated Zn₂GeO₄ phosphors are multifunctional green-emitting components for optical thermometry, anticounterfeiting, fingerprint detection, and solid-state lighting applications.     

Crystal structure and pale‐yellow emitting properties of K3Gd1–xDyxB6O12 solid solutions

A new potassium dysprosium polyborate, K₃DyB₆O₁₂, has been prepared via the high‐temperature molten salt method and structurally characterized by single‐crystal X‐ray diffraction analysis. The structure can be described as a three‐dimensional framework composed of isolated bicyclic [B₅O₁₀]^5? groups and Dy³⁺ and K⁺ ions. The Fourier transform IR (FT–IR) and ultraviolet–visible (UV–Vis) spectra were investigated. A series of K₃Gd_1–xDy_xB₆O₁₂ phosphors was prepared and their photoluminescence properties were studied. The K₃Gd_1–xDy_xB₆O₁₂ phosphors exhibit a strong yellow emission band at 577 nm (the ⁴F_9/2→⁶H_13/2 transition of Dy³⁺) under UV excitation of 275 nm (the ⁸S_7/2→⁶I_J transition of Gd³⁺), suggesting the occurrence of the energy transfer Gd³⁺→Dy³⁺. The optimized doping concentration of the Dy³⁺ ion was 8 mol%. We may expect that K₃Gd_1–xDy_xB₆O₁₂ is a promising pale‐yellow emission phosphor for visual displays or solid‐state lighting.     

Hydrophobic poly(lauryl methacrylate)‐coated magnetic nano‐composite particles for removal of organic pollutants

This paper described a simple novel technique to prepare magnetic nano‐composite particles coated with highly crosslinked poly(lauryl methacrylate) (PLMA), a hydrophobic polymer because of its long chain alkyl group for application in waste water purification. Nano‐sized magnetite (Fe₃O₄) particles prepared by coprecipitation of Fe²⁺ and Fe³⁺ from their alkali aqueous solution were encapsulated with SiO₂ following treatment with tetraethylorthosilicate (TEOS). Finally precipitation copolymerization of LMA and divinyl benzene (DVB) in the presence of Fe₃O₄/SiO₂ particles was carried out within stable isolated droplets containing hexadecane–toluene mixture (4:1 mixture HD‐T). The produced PLMA‐coated magnetic composite particles named as Fe₃O₄/SiO₂/P(LMA‐DVB) were characterized by Fourier Transform IR (FTIR), transmission electron microscopy (TEM), thermogravimetry (TG) and X‐ray diffractometer (XRD) analyses. The performance of the composite particles was evaluated for the removal of organic pollutants from water. Copyright © 2015 John Wiley & Sons, Ltd.     

A new disordered langbeinite‐type compound,K2Tb1.5Ta0.5P3O12, and Eu3+‐doped multicolour light‐emitting properties

For the first time, a new langbeinite‐type phosphate, namely potassium terbium tantalum tris(phosphate), K₂Tb_1.5Ta_0.5(PO₄)₃, has been prepared successfully using a high‐temperature flux method and has been structurally characterized by single‐crystal X‐ray diffraction. The results show that its structure can be described as a three‐dimensional open framework of [Tb_1.5Ta_0.5(PO₄)₃]_∞ interconnected by K⁺ ions. The Tb^III and Ta^V cations in the structure are disordered and occupy the same crystallographic sites. The IR spectrum, the UV–Vis spectrum, the morphology and the Eu³⁺‐activated photoluminescence spectroscopic properties were studied. A series of Eu³⁺‐doped phosphors, i.e. K₂Tb_1.5–xTa_0.5(PO₄)₃:xEu³⁺ (x = 0.01, 0.03, 0.05, 0.07, 0.10), were prepared via a solid‐state reaction and the photoluminescence properties were studied. The results show that under near‐UV excitation, the luminescence colour can be tuned from green through yellow to red by simply adjusting the Eu³⁺ concentration from 0 to 0.1, because of the efficient Tb³⁺→Eu³⁺ energy‐transfer mechanism.     

Control of Luminescence by Tuning of Crystal Symmetry and Local Structure in Mn4+‐Activated Narrow Band Fluoride Phosphors

Mn⁴⁺‐doped fluoride phosphors have been widely used in wide‐gamut backlighting devices because of their extremely narrow emission band. Solid solutions of Na₂(Si_xGe_1?x)F₆:Mn⁴⁺ and Na₂(Ge_yTi_1?y)F₆:Mn⁴⁺ were successfully synthesized to elucidate the behavior of the zero‐phonon line (ZPL) in different structures. The ratio between ZPL and the highest emission intensity υ₆ phonon sideband exhibits a strong relationship with luminescent decay rate. First‐principles calculations are conducted to model the variation in the structural and electronic properties of the prepared solid solutions as a function of the composition. To compensate for the limitations of the Rietveld refinement, electron paramagnetic resonance and high‐resolution steady‐state emission spectra are used to confirm the diverse local environment for Mn⁴⁺ in the structure. Finally, the spectral luminous efficacy of radiation (LER) is used to reveal the important role of ZPL in practical applications.     

Finding an efficient far-red-emitting CaMg2La2W2O12:Mn4+ phosphor toward indoor plant cultivation LED lighting

The development of high-brightness far-red-emitting phosphors with emission wavelength within 650–750 nm is of great significance for indoor plant cultivation light-emitting diode (LED) lighting. Herein, we demonstrate a novel efficient far-red-emitting phosphors CaMg₂La₂W₂O₁₂:Mn⁴⁺ (abbreviated as CMLW:Mn⁴⁺) toward application in plant cultivation LEDs. Interestingly, the CMLW:Mn⁴⁺ phosphors show a broad excitation band in the 250–600 nm spectral range with two peaks at 352 and 479 nm, indicating they could be efficiently excited by near-ultraviolet and blue light. Under 352 nm excitation, the CMLW:Mn⁴⁺ phosphors exhibit an intense far-red emission band in the wavelength range of 650–800 nm peaking at 708 nm, corresponding to the ²E_g → ⁴A_2g transition of Mn⁴⁺ ions. Mn⁴⁺ doping concentration-dependent luminescence properties are studied in detail, and the concentration quenching mechanism is also investigated. Particularly, the internal quantum efficiency of CMLW:Mn⁴⁺ phosphors reaches as high as 44%, and their PL spectra match well with the absorption spectrum of phytochrome P_FR (P_FR stands for far-red-absorbing form of phytochrome). Furthermore, a prototype LED device is fabricated by coating the as-prepared CMLW:0.8%Mn⁴⁺ phosphors on a 460 nm blue LED chip, which produces bright far-red emissions upon 20–300 mA driving currents. This work reveals that the newly discovered far-red-emitting CMLW:Mn⁴⁺ phosphors hold great potential for application in indoor plant cultivation.     

Suppression of charge imbalance via Li+-Mn4+ co-incorporated Sr2YSbO6 red phosphors for warm w-LEDs

Mn⁴⁺-activated double perovskite phosphors with composition diversity have presented excellent luminescent performances. However, the charge imbalance between Mn⁴⁺ and matrix cations would increase non-radiative recombination and reduce the structural stability. Here, novel high-efficiency stable Li⁺/Mn⁴⁺ co-incorporated Sr₂YSbO₆ red phosphors are successfully synthesized via a solid-state reaction method for warm w-LEDs, where the Li⁺ ions have the effect of charge balance for Sr₂YSbO₆:Mn⁴⁺ and reduce the non-radiative energy transfer among Mn⁴⁺ ions. It is demonstrated that the substitution of Li⁺–Mn⁴⁺ pairs for Sb⁵⁺ can enhance the bonding with low-shifted diffraction peaks and high emission intensity, and prolong the decay lifetime, compared with those of Mn⁴⁺ single-doped ones. Impressively, the thermal stability is enhanced to 89.72% from 84.61% at the original value of 303 K. Finally, a w-LED device based on the optimal phosphor Sr₂YSbO₆:0.01Mn⁴⁺/0.01Li⁺ red component exhibits a correlated color temperature of 4487 K and color rendering index of 80.2. Therefore, the incorporated Li⁺ ions serve as both charge compensator and co-activator in Mn⁴⁺-activated double perovskite phosphors with the aim of high luminescent performance and thermal stability.     

Preparation and photoluminescence properties of Mn-activated M2Si5N8 (M=Ca, Sr, Ba) phosphors

Mn²⁺-doped M₂Si₅N₈ (M=Ca, Sr, Ba) phosphors have been prepared by a solid-state reaction method at high temperature and their photoluminescence properties were investigated. The Mn²⁺-activated M₂Si₅N₈ phosphors exhibit narrow emission bands in the wavelength range of 500-700 nm with peak center at about 599, 606 and 567 nm for M=Ca, Sr, Ba, respectively, due to the ⁴T₁(⁴G)→⁶A₁(⁶S) transition of Mn²⁺. The long-wavelength emission of Mn²⁺ ion in the host of M₂Si₅N₈ is attributed to the effect of a strong crystal-field of Mn²⁺ in the nitrogen coordination environment. Also it is observed that there exists energy transfer between M₂Si₅N₈ host lattice and activator (Mn²⁺). The potential applications of these phosphors have been pointed out.     

Luminescence Properties of Ca2Ga2SiO7:RE Phosphors for UV White‐Light‐Emitting Diodes

A series of Eu²⁺‐, Ce³⁺‐, and Tb³⁺‐doped Ca₂Ga₂SiO₇ phosphors is synthesized by using a high‐temperature solid‐state reaction. The powder X‐ray diffraction and structure refinement data indicate that our prepared phosphors are single phased and the phosphor crystalizes in a tetrahedral system with the ${P\bar 42m}$ (113) space group. The Eu²⁺‐ and Ce³⁺‐doped phosphors both have broad excitation bands, which match well with the UV light‐emitting diodes chips. Under irradiation of λ=350 nm, Ca₂Ga₂SiO₇:Eu²⁺ and Ca₂Ga₂SiO₇:Ce³⁺, Li⁺ have green and blue emissions, respectively. Luminescence of Ca₂Ga₂SiO₇:Tb³⁺, Li⁺ phosphor varies with the different Tb³⁺ contents. The thermal stability and energy‐migration mechanism of Ca₂Ga₂SiO₇:Eu²⁺ are also studied. The investigation results indicate that the prepared Ca₂Ga₂SiO₇:Eu²⁺ and Ca₂Ga₂SiO₇:Ce³⁺, Li⁺ samples show potential as green and blue phosphors, respectively, for UV‐excited white‐light‐emitting diodes.     

Site Occupancies,Electron–Vibration Interaction and Energy Transfer of CaMgSi2O6: Eu2+, Mn2+ Phosphors for Potential Temperature-Sensing and Anti-counterfeiting Applications

Eu²⁺-, Mn²⁺- and Eu²⁺−Mn²⁺-doped CaMgSi₂O₆ phosphors have been prepared by a high-temperature solid-state reaction. Systematic investigation of the concentration- and temperature-dependent luminescence of Mn²⁺ showed that Mn²⁺ ions occupy two distinct sites in CaMgSi₂O₆. Electron–vibration interaction (EVI) analyses of Mn²⁺ ions revealed Huang–Rhys factors of 4.73 and 2.82 as well as effective phonon energies of 313 and 383 cm⁻¹ for the two sites. Eu²⁺−Mn²⁺ energy transfer is also discussed, and its efficiency is estimated by lifetime and luminescence spectra. The different thermal quenching behaviours of Eu²⁺ and Mn²⁺, the distinct emission colours of Eu²⁺ (blue, band peak at ∼451 nm) and Mn²⁺ (yellow–red range, band peaks at ∼583 and 693 nm) endow the co-doped samples with potential applications in luminescence thermometry and temperature-/excitation wavelength-responsive dual anti-counterfeiting.     

ZrO_2包覆的层状富锂正极材料0.6Li[Li_(1/3)Mn_(2/3)]O_2·0.4LiNi_(5/12)Mn_(5/12)Co_(1/6)O_2的电化学性能

采用喷雾干燥法合成了富锂层状氧化物正极材料0.6Li[Li_(1/3)Mn_(2/3)]O2·0.4LiNi_(5/12)Mn_(5/12)Co_(1/6)O_2(简称LNMCO),并使用Zr(CH3COO)4进行ZrO_2的包覆改性。TEM测试结果显示纳米级的ZrO_2颗粒附着在LNMCO的表面。包覆质量分数为1.5%的ZrO_2包覆样品的首圈库伦效率和放电比容量有着显著提升,在室温下其首圈库伦效率和放电比容量(电流密度:20 m A·g-1,电压:2.0~4.8 V)分别为87.2%,279.3 m Ah·g-1,而原样则为75.1%,224.1 m Ah·g-1,循环100圈之后,1.5%ZrO_2包覆样品的放电比容量为248.3 m Ah·g-1,容量保持率为88.9%,高于原样的195.9 m Ah·g-1和87.4%。     

球形PVC-MnO2离子筛的制备及锂吸附性能

本实验室前期所制备的Li4Mn5O12超细粉末在卤水体系中对Li+具有较大的吸附容量和良好的选择性。但由于超细粉体的流动性和渗透性差,无法直接应用于固定床,需对粉末吸附材料进行成型造粒,以便于实际应用。本论文采用聚氯乙烯为粘结剂,制备出粒径约为2.0~3.5 mm的球形PVC-Li4Mn5O12,经盐酸处理后得到球形PVC-MnO2离子筛。并通过扫描电镜(SEM)、X射线衍射仪(XRD)、静态和动态连续锂吸附实验研究了球形离子筛形貌和锂离子吸附性能。结果表明,球形离子筛对Li+的吸附容量高达5.28 mmol.g-1,在混合溶液中对Li+具有良好的选择性,这对于在盐湖卤水或海水提锂具有重要的实用意义。     

Photo and Thermo‐luminescence Properties of Mn4+, Ce4+ and Sm3+ in MgAl2Si2O8 Phosphor

Mn⁴⁺, Ce⁴⁺ and Sm³⁺ doped MgAl₂Si₂O₈‐based phosphors were synthesized at 1300 °C by solid state reaction and characterized by thermogravimetry (TG), differential thermal analysis (DTA), X‐ray powder diffraction (XRD), photoluminescence (PL), thermoluminescence (TL) and scanning electron microscopy (SEM). The phosphors showed broad red emission bands in the range of 610–715 nm and different maximum intensity when activated by UV illumination. Such a red emission can be attributed to the intrinsic ²E→⁴A₂ transitions of Mn⁴⁺.     

Photoluminescence Properties of a Promising Red-emitting Phosphor CaNb2O6:EU3+for Trichromatic White Light Emitting Diodes Application

Motivated by the need for new phosphors of white light emitting diode (WLED) application, Ca_0.95Nb₂ O₆:Eu³⁺_0.05 phosphors were synthesized by high temperature solid‐state reaction. Increasing the content of doped‐Eu³⁺ and adding the co‐activator Bi³⁺ to improve the photoluminescence (PL) intensity of Ca_1?xNb₂ O₆Eu³⁺_x phosphors were investigated in detail. The effects of Eu³⁺ were better than that of Bi³⁺ on the PL intensity of Ca_1?xNb₂ O₆Eu³⁺_x phosphors. Compared with Y₂O₂ S:0.05Eu³⁺ the Ca_0.70Nb₂ O₆:Eu³⁺_0.03 phosphor could be excited efficiently by UV (395 nm) light and emit the red light at 614 nm with line spectra, which were coupled well with the characteristic emission from UV‐Near UV LED. The CIE (International Commission on Illumination) chromaticity coordinates (x?0.654, y?0.348) of Ca_0.70Nb₂O₆:Eu³⁺_0.03 were close to the NTSC (National Television Standard Committee) standard values. Therefore Ca_0.70Nb₂ O₆:Eu³⁺_0.03 might find application to UV‐Near UV InGaN chip‐based white light emitting diodes, which is further proved by the LED fabrication with the Ca_0.70Nb₂ O₆:Eu³⁺_0.03 phosphor.     

Improved water resistance of SrAl2O4: Eu2+, Dy3+ phosphor directly achieved in a water-containing medium

In this paper, a heterogeneous precipitation method utilizing urea hydrolysis was adopted to coat a SiO₂ layer on the surface of SrAl₂O₄:Eu²⁺, Dy³⁺ long persistence phosphors. To avoid phosphor hydrolysis in a water-containing coating medium, the hydrolysis and polymerization reactions of tetraethyl orthosilicate (TEOS) were concerned and carried out. The crystal phases, surface morphologies, hydrolysis stability and water resistance on afterglow properties of coated phosphors were investigated. Scanning electron microscopy, energy dispersive spectrum analysis, transmission electron microscope and Fourier transform infrared spectrum results confirmed that a continuous, uniform and compact SiO₂ coating layer was successfully obtained on the phosphors surface. A theoretical coating amount of 5% or higher was found to be good for hydrolysis stability. Photoluminescence results revealed the coated phosphors showed much better water resistance on afterglow properties than the uncoated phosphor. We also discussed and proposed the hydrolysis restriction mechanism of SrAl₂O₄:Eu²⁺, Dy³⁺ in the water-containing coating medium.     

Novel red-emitting phosphors, (Mg(1−x−y)MnxDyy)Al2Si2O8 and (Mg(1−x−y)MnxTmy)Al2Si2O8

Mn⁴⁺ doped and Dy³⁺, Tm³⁺ co-doped MgAl₂Si₂O₈-based phosphors were prepared by conventional solid state reaction at 1,300 °C. They were characterized by thermogravimetry, differential thermal analysis, X-ray powder diffraction, photoluminescence, and scanning electron microscopy. The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 600–715 nm and had a different maximum intensity when activated by UV illumination, was discussed. Such a red emission can be attributed to the ²E → ⁴A₂ transitions of Mn⁴⁺.