Construction of Well‐Defined Redox‐Responsive CO2‐Based Polycarbonates: Combination of Immortal Copolymerization and Prereaction Approach

Due to the axial group initiation in traditional (salen)CoX/quaternary ammonium catalyst system, it is difficult to construct single active center propagating polycarbonates for copolymerization of CO₂/epoxides. Here a redox‐responsive poly(vinyl cyclohexene carbonate) (PVCHC) with detachable disulfide‐bond backbone is synthesized in a controllable manner using (salen)CoTFA/[bis(triphenylphosphine)iminium, [PPN]TFA binary catalyst, where the axial group initiation is depressed by judiciously choosing 3,3′‐dithiodipropionic acid as starter. While for those comonomers failing to obtain polycarbonate with unimodal gel permeation chromatography (GPC) curve, a versatile method is developed by combination of immortal copolymerization and prereaction approach, and functional aliphatic polycarbonates having well‐defined architecture and narrow polydispersity can be prepared. The resulting PVCHC can be further functionalized with alkenes by versatile cross‐metathesis reaction to tune the physicochemical properties. The combination of immortal polymerization and prereaction approach creates a powerful platform for controllable synthesis of functional CO₂‐based polycarbonates.

     

Hydrophilic CO2‐based biodegradable polycarbonates: Synthesis and rapid thermo‐responsive behavior

Common CO₂‐based biodegradable polycarbonates like poly(propylene carbonate) or poly(cyclohexene carbonate) are generally hydrophobic, leading to slow biodegradation rate and poor cell adhesion, which limit their applications in the biomedical field. Here hydrophilic polycarbonates were prepared by one‐pot terpolymerization of CO₂, propylene oxide (PO), and 2‐((2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)methyl)oxirane (ME₃MO) using binary Salen Co(III)‐Cl/PPNCl catalyst system. The resultant terpolymers showed one glass transition temperature (T_g), which decreased with the increase of ME₃MO units in the terpolymers (F_ME3MO). Water contact angles of the resultant terpolymers with F_ME3MO of 4.2?23.6% were 68?25°, while that of poly(propylene carbonate) was 90°, indicating that the terpolymers became hydrophlilic. Furthermore, the terpolymers with F_ME3MO more than 25.8% exhibited reversible and rapid thermo‐responsive property in water, and the lower critical solution temperature (LCST) was highly sensitive to F_ME3MO. In particular, aqueous solution of the terpolymer with F_ME3MO of 72.6% showed a LCST around 35.2 °C, close to body temperature, which was promising for biomedical applications, especially for in vivo applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2834–2840.     

Transparent Films from CO2‐Based Polyunsaturated Poly(ether carbonate)s: A Novel Synthesis Strategy and Fast Curing

Transparent films were prepared by cross‐linking polyunsaturated poly(ether carbonate)s obtained by the multicomponent polymerization of CO₂, propylene oxide, maleic anhydride, and allyl glycidyl ether. Poly(ether carbonate)s with ABXBA multiblock structures were obtained by sequential addition of mixtures of propylene oxide/maleic anhydride and propylene oxide/allyl glycidyl ether during the polymerization. The simultaneous addition of both monomer mixtures provided poly(ether carbonate)s with AXA triblock structures. Both types of polyunsaturated poly(ether carbonate)s are characterized by diverse functional groups, that is, terminal hydroxy groups, maleate moieties along the polymer backbone, and pendant allyl groups that allow for versatile polymer chemistry. The combination of double bonds substituted with electron‐acceptor and electron‐donor groups enables particularly facile UV‐ or redox‐initiated free‐radical curing. The resulting materials are transparent and highly interesting for coating applications.     

Comb‐Like Amphiphilic Polycarbonates with Different Lengths of Cationic Branches for Enhanced siRNA Delivery

Owing to the biodegradability and good biocompatibility polycarbonates show the versatile class of applications in biomedical fields. While their poor functional ability seriously limited the development of functional polycarbonates. Herein, a new Br‐containing cyclic carbonate (MTC‐Br) and a polycarbonate atom transfer radical polymerization (ATRP) macro‐initiator (PEG‐PMTC‐Br) is synthesized. Then, by initiating the side‐chain ATRP of 2‐(dimethyl amino)ethyl methacrylate (DMAEMA) on PEG‐PMTC‐Br, a series of comb‐like amphiphilic cationic polycarbonates, PEG‐b‐(PMTC‐g‐PDMAEMA) (GMDMs), with different lengths of cationic branches are successfully prepared. All these poly(ethylene glycol)‐b‐(poly((5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐yl) methyl 2‐bromo‐2‐methylpropanoate/1,3‐dioxane‐2‐one)‐g‐poly(2‐dimethyl aminoethyl methacrylate) (GMDMs) self‐assembled nanoparticles (NPs) (≈180 nm, +40 mV) can well bind siRNA to form GMDM/siRNA NPs. The gene silence efficiency of GMDM/siRNA high to 80%, which is even higher than the commercial transfection reagent lipo2000 (76%). But GMDM/siRNA shows lower cell uptake than lipo2000. So, the high gene silence ability of GMDM/siRNA NPs can be attributed to the strong intracellular siRNA trafficking capacity. Therefore, GMDM NPs are potential siRNA vectors and the successful preparation of comb‐like polycarbonates also provides a facile way for diverse side‐chain functional polycarbonates, expanding the application of polycarbonates.     

Stable,Hydroxyl Functional Polycarbonates With Glycerol Side Chains Synthesized From CO2 and Isopropylidene(glyceryl glycidyl ether)

A series of functional polycarbonates, poly((isopropylidene glyceryl glycidyl ether)‐co‐(glycidyl methyl ether) carbonate) (P((IGG‐co‐GME) C)) random copolymers with different fractions of 1,2‐isopropylidene glyceryl glycidyl ether (IGG) units, is synthesized. After acidic hydrolysis of the acetal protecting groups, a new type of functional polycarbonate prepared directly from CO₂ and glycerol is obtained, namely poly((glyceryl glycerol)‐co‐(glycidyl methyl ether) carbonate) (P((GG‐co‐GME) C)). All hydroxyl functional samples exhibit monomodal molecular weight distributions with PDIs between 2.5 and 3.3 and M _n between 12 000 and 25 000 g mol⁻¹. Thermal properties reflect the amorphous structure of the polymers. The materials are stable in bulk and solution.     

Guanidinylated Amphiphilic Polycarbonates with Enhanced Antimicrobial Activity by Extending the Length of the Spacer Arm and Micelle Self‐Assembly

Nine guanidinylated amphiphilic polycarbonates are rationally designed and synthesized. Each polymer has the same biodegradable backbone but different side groups. The influence of the hydrophobic/hydrophilic effect on antimicrobial activities and cytotoxicity is systematically investigated. The results verify that tuning the length of the spacer arm between the cationic guanidine group and the polycarbonate backbone is an efficient design strategy to alter the hydrophobic/hydrophilic balance without changing the cationic charge density. A spacer arm of six methylene units (CH₂)₆ shows the best antimicrobial activity (minimum inhibitory concentration, MIC = 40 µg mL^?1 against Escherichia coli, MIC = 20 µg mL^?1 against Staphylococcus aureus, MIC = 40 µg mL^?1 against Candida albicans) with low hemolytic activity (HC₅₀ > 2560 µg mL^?1). Furthermore, the guanidinylated polycarbonates exhibit the ability to self‐assemble and present micelle‐like nanostructure due to their intrinsic amphiphilic macromolecular structure. Transmission electron microscopy and dynamic light scattering measurements confirm polymer micelle formation in aqueous solution with sizes ranging from 82 to 288 nm.     

Stereoregular polycarbonate synthesis: Alternating copolymerization of CO2 with aliphatic terminal epoxides catalyzed by multichiral cobalt(III) complexes

Completely stereoregular polycarbonate synthesis was achieved with the use of unsymmetric multichiral cobalt‐based complexes bearing a derived chiral BINOL and an appended 1,5,7‐triabicyclo[4.4.0] dec‐5‐ene as catalyst for the copolymerization of CO₂ and aliphatic terminal epoxides at mild conditions. The (S,S,S)‐Co(III) complex 1c with sterically hindered substituent group is more stereoregular catalyst for the copolymerization of CO₂ and racemic propylene oxide to afford a perfectly regioregular poly(propylene carbonate) (PPC), with >99% head‐to‐tail linkages, >99% carbonate linkages, and a K_rel of 24.4 for the enchainment of (R)‐epoxide over (S)‐epoxide. The isotactic PPC exhibits an enhanced glass transition temperature of 47 °C, which is 10–12 °C higher than that of the corresponding irregular polycarbonate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and Modification of Functional Polycarbonates with Pendant Allyl Groups

Functional aliphatic polycarbonates with pendant allyl groups were synthesised by copolymerization of carbon dioxide and allyl glycidyl ether (AGE) in the presence of a catalyst system based on ZnEt₂ and pyrogallol at a molar ratio 2 : 1. The functionality of some polycarbonates was reduced by replacing a part of allyl ether with saturated glycidyl ether, i.e., butyl glycidyl ether (BGE) or isopropyl glycidyl ether (IGE). Polycarbonates obtained by the copolymerization of AGE and CO₂ or by the terpolymerization of AGE, IGE and CO₂ were oxidized with m‐chloroperbenzoic acid to their respective poly(epoxycarbonate)s. The influence of the AGE/ΣGE ratio in the polycarbonates, the polymer concentration in the reaction solution and the duration of the reaction on the conversion of allyl groups into glycidyl ones was examined. A tendency to gelation of the initial and oxidized polycarbonates during storage was observed. The initial polycarbonates and their oxidized forms were degraded in aqueous buffer of pH = 7.4 at 37°C. The course of hydrolytic degradation was monitored by the determination of mass loss.     

Amphiphilic ABA triblock copolymer as surfactant in syntheses of microlatexes bearing cationic groups

Polystyrene microlatexes have been prepared by conventional emulsion polymerization with a novel amphiphilic water‐soluble ABA triblock copolymer, poly[2‐(dimethylamino)ethyl methacrylate]₁₅‐b‐poly(propylene oxide)₃₆‐b‐poly[2‐(dimethyl‐amino)ethyl methacrylate]₁₅ (PDMAEMA₁₅‐PPO₃₆‐PDMAEMA₁₅), as a polycationic emulsifier under acidic or neutral conditions. The ABA triblock copolymer was developed by oxyanion‐initiated polymerization in our laboratory. In this study, it acted well both as a polycationic polymeric surfactant to form block copolymeric micelles for emulsion polymerization and as a stabilizer to be anchored into the polystyrene microlatex or adsorbed onto its surface. The results obtained with various copolymer concentrations and different pH media showed that microlatex diameters decreased remarkably with increased concentration of this ABA triblock copolymeric emulsifier, but were not as much affected by the pH of media within the experimental range of 3.4–7.0. The observed difference of the particle sizes from transmission electron microscopy and dynamic light scattering measurements is discussed in terms of the effect of the absorbed surfactants and their electrical double layers. This difference has led to the formation of a cationic polyelectrolyte fringe on the surface of microspheres. The final microlatexes were characterized with respect to total conversion, particle diameter, and particle size distribution as well as colloidal stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3734–3742, 2002     

Oxygen‐Triggered Switchable Polymerization for the One‐Pot Synthesis of CO2‐Based Block Copolymers from Monomer Mixtures

Switchable polymerization provides the opportunity to regulate polymer sequence and structure in a one‐pot process from mixtures of monomers. Herein we report the use of O₂ as an external stimulus to switch the polymerization mechanism from the radical polymerization of vinyl monomers mediated by (Salen)Co^III?R [Salen=N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamine; R=alkyl] to the ring‐opening copolymerization (ROCOP) of CO₂/epoxides. Critical to this process is unprecedented monooxygen insertion into the Co?C bond, as rationalized by DFT calculations, leading to the formation of (Salen)Co^III?O?R as an active species to initiate ROCOP. Diblock poly(vinyl acetate)‐b‐polycarbonate could be obtained by ROCOP of CO₂/epoxides with preactivation of (Salen)Co end‐capped poly(vinyl acetate). Furthermore, a poly(vinyl acetate)‐b‐poly(methyl acrylate)‐b‐polycarbonate triblock copolymer was successfully synthesized by a (Salen)cobalt‐mediated sequential polymerization with an O₂‐triggered switch in a one‐pot process.     

CO2‐Sourced α‐Alkylidene Cyclic Carbonates: A Step Forward in the Quest for Functional Regioregular Poly(urethane)s and Poly(carbonate)s

Described is a robust platform for the synthesis of a large diversity of novel functional CO₂‐sourced polymers by exploiting the regiocontrolled ring‐opening of α‐alkylidene carbonates by various nucleophiles. The reactivity of α‐alkylidene carbonates is dictated by the exocyclic olefinic group. The polyaddition of CO₂‐sourced bis(α‐alkylidene carbonate)s (bis‐αCCs) with primary and secondary diamines provides novel regioregular functional poly(urethane)s. The reactivity of bis‐αCCs is also exploited for producing new poly(β‐oxo‐carbonate)s by organocatalyzed polyaddition with a diol. This synthesis platform provides new functional variants of world‐class leading polymer families (polyurethanes, polycarbonates) and valorizes CO₂ as a chemical feedstock.     

Bifunctional cobalt Salen complex: a highly selective catalyst for the coupling of CO2 and epoxides under mild conditions

A bifunctional cobalt Salen complex containing a Lewis acid metal center and two covalent bonded Lewis bases on the ligand was designed and used for the coupling of CO₂ and epoxides under mild conditions. The complex exhibited excellent activity (turnover frequency = 673/h) and selectivity (no less than 97%) for polymer formation in the copolymerization of propylene oxide (PO) and CO₂ at an appropriate combination of all variables. High molecular weight of 110 200 and yield 99% were achieved at a higher [PO]/[complex] ratio of 6000:1. The complex also worked satisfactorily for the terpolymerization of CO₂, PO and cyclohexene oxide (CHO), without formation of cyclic carbonate or ether linkages to give the polycarbonate. High cyclohexene carbonate unit content in the CO₂/PO/CHO terpolymers resulted in enhanced thermal stability. Copyright © 2011 John Wiley & Sons, Ltd.     

Stereodivergent Carbamate Synthesis by Selective in Situ Trapping of Organic Carbonate Intermediates

Trans carbamates have been prepared in a diastereoselective approach by a judicious one‐pot combination of organic carbonates, prepared in situ, and suitable amine reagents under appropriate reaction conditions. This unprecedented approach allows for stereodivergence from a single oxirane substrate with easy access to both cis and trans carbamate isomers with high stereoselectivity (>19:1 d.r.). Key to the control of the diastereoselective nature of the conversions that lead to the trans carbamates is the in situ formation of trans‐configured oligo/polycarbonates through Al catalysis, which provides the targeted products after aminolysis. The present results demonstrate the valorization of a renewable carbon‐based reagent (CO₂) into new valuable scaffolds and an unusual stereocontrol exerted through carbonate intermediates. A series of control experiments support the proposed mechanistic rationale towards the trans carbamate products, which is based on the trapping of an in situ formed trans‐configured oligo/polycarbonate.     

Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

A sustainable approach for the synthesis of recyclable cyclic CO2-based polycarbonates

It is highly desirable to reduce the environmental pollution related to the disposal of end-of-life plastics. Polycarbonates derived from the copolymerization of CO₂ and epoxides have attracted much attention since they can enable CO₂-fixation and furnish biorenewable and degradable polymeric materials. So far, only linear CO₂-based polycarbonates have been reported and typically degraded to cyclic carbonates. Here we synthesize a homogeneous dinuclear methyl zinc catalyst ((BDI-ZnMe)₂, 1) to rapidly copolymerize meso-CHO and CO₂ into poly(cyclohexene carbonate) (PCHC) with an unprecedentedly cyclic structure. Moreover, in the presence of trace amounts of water, a heterogeneous multi-nuclear zinc catalyst ((BDI-(ZnMe₂·xH₂O))_n, 2) is prepared and shows up to 99% selectivity towards the degradation of PCHC back to meso-CHO and CO₂. This strategy not only achieves the first case of cyclic CO₂-based polycarbonate but also realizes the complete chemical recycling of PCHC back to its monomers, representing closed-loop recycling of CO₂-based polycarbonates.

It is highly desirable to reduce the environmental pollution related to the disposal of end-of-life plastics.     

Gas sorption and transport properties of bisphenol-I-polycarbonate

Gas sorption and transport characterization of a new polymer in the polycarbonate family, based on the bisphenol of 3,3,5-trimethylcyclohexane-1-one (BPI) is reported at 35°C. By comparison with properties of other known polycarbonates, the effects of inhibition of both packing and segmental motion due to the introduction of the bulky substituent in the backbone are elucidated. The T_g of the material was measured with differential scanning calorimeter (DSC) and was found to be unusually high for a polycarbonate (233°C). This indicates a successful inhibition of the large-scale segmental mobility of the polymer. Variable ¹³C NMR analysis indicated that rotation of one phenylene ring has an unusually high (ca. 10 kcal) energy barrier, whereas the other phenylene ring has a more typical rotation profile (barrier < 3 kcal). The density was measured and found to be low (1.107 g/cm³), indicating a high fractional free volume (FFV) for the polymer. Consistent with expectations, the introduction of the bulky-substituted cyclohexane group gave high permeabilities for the various gases tested (N₂, O₂, He, CH₄, CO₂) compared to most standard polycarbonates. On the other hand, the permselectivities were typical for standard polycarbonates. The solubility coefficients of all gases were rather high, as expected for a polymer with such an open structure. © 1994 John Wiley & Sons, Inc.     

Biodegradable Polycarbonate Synthesis by Copolymerization of Carbon Dioxide with Epoxides Using a Heterogeneous Zinc Complex

As a means for the chemical fixation of carbon dioxide and the synthesis of biodegradable polycarbonates, copolymerizations of carbon dioxide with various epoxides such as cyclohexene oxide (CHO), cyclopetene oxide, 4-vinyl-1-cyclohexene-1,2epoxide, phenyl glycidyl ether, allyl glycidyl ether, propylene oxide, butene oxide, hexene oxide, octene oxide, and 1-chloro-2,3-epoxypropane were investigated in the presence of a double metal cyanide catalyst (DMC). The DMC catalyst was prepared by reacting K₃Co(CN)₆ with ZnCl₂, together with tertiary butyl alcohol and poly(tetramethylene ether glycol) as complexing reagents and was characterized by various spectroscopic methods. The DMC catalyst showed high activity (526.2 g-polymer/g-Zn atom) for CHO/CO₂ (P_CO2 = 140 psi) copolymerization at 80 °C, to yield biodegradable aliphatic polycarbonates of narrow polydispersity (M_w/M_n = 1.67) and moderate molecular weight (M_n = 8900). The DMC catalyst also showed high activities with different CO₂ reactivities for other epoxides to yield various aliphatic polycarbonates with narrow polydispersity.     

Star‐like PAA‐g‐PPO well‐defined amphiphilic graft copolymer synthesized by ATNRC and SET‐NRC reaction

A series of well‐defined amphiphilic star graft copolymers consisting of hydrophilic poly(acrylic acid) backbone and hydrophobic poly(propylene oxide) side chains were synthesized by the sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization and atom transfer nitroxide radical coupling (ATNRC) or single electron transfer‐nitroxide radical coupling (SET‐NRC) reaction followed by the selective hydrolysis of poly(tert‐butyl acrylate) backbone. A Br‐containing acrylate monomer, tert‐butyl 2‐((2‐bromopropanoyloxy)methyl)acrylate, was first homopolymerized via RAFT polymerization using a new star‐like chain‐transfer agent with four arms in a controlled way to give a well‐defined star‐like backbone with a narrow molecular weight distribution (M_w/M_n = 1.23). The grafting‐onto strategy was used to synthesize the well‐defined PtBA‐g‐PPO star graft copolymers with narrow molecular weight distributions (M_w/M_n = 1.14–1.25) via ATNRC or SET‐NRC reaction between the Br‐containing PtBA‐based star‐like backbone and poly(propylene oxide) with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group using CuBr/PMDETA or Cu/PMDETA as catalytic system. PAA‐g‐PPO amphiphilic star graft copolymers were obtained by the selective acidic hydrolysis of star‐like PtBA‐based backbone in acidic environment without affecting the side chains. The critical micelle concentrations in aqueous media and brine were determined by the fluorescence probe technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2084–2097, 2010     

The influence of solution‐state conditions and stirring rate on the assembly of poly(acrylic acid)‐containing amphiphilic triblock copolymers with multi‐amines

In the effort towards making nanoscale objects and assemblies feasible for use as functional materials, it is imperative to obtain control over the fundamental architectures and essential to understand what experimental conditions cause the manifestation of specific morphologies. A number of factors are known to influence the shape during the self‐assembly of amphiphilic block copolymers in solution, including solvent composition, polymer length, hydrophobicity versus hydrophilicity, as well as the addition of additives that can interact with segments of the block copolymers. This research, focused on developing an understanding of the micellar architectures accessed by the amphiphilic triblock copolymer of acrylic acid, methyl acrylate, and styrene, PAA₈₅‐b‐PMA₄₀‐b‐PS₃₅, as a function of the stirring rate, together with other factors, when undergoing coassembly with ethylenediamine or diethylenetriamine in water/tetrahydrofuran solutions. The work demonstrates that the rate at which the polymer solution was stirred impacts the shape of the solution‐state assemblies formed by the triblock copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Gas transport properties of poly(2,2,4,4-tetramethyl cyclobutane carbonate)

Gas transport properties of semicrystalline films of poly(2,2,4,4-tetramethyl cyclobutane carbonate) (TMCBPC) were studied. Permeability coefficients for He, O₂, N₂, CH₄, and CO₂ at 35°C for pressures between 1 and 20 atm are reported as well as sorption isotherms for N₂, CH₄, and CO₂ at the same conditions. The permeability coefficients for TMCBPC are larger than corresponding values for the aromatic bisphenol-A polycarbonate (PC) and tetramethyl bisphenol-A polycarbonate (TMPC), even though the TMCBPC films are semicrystalline. These results are explained on the basis of the larger free volume available for permeation in this polymer. Significant TMCBPC plasticization by CO₂ was also observed and this causes typical time-dependent behavior. The plasticization process starts at very low pressures compared with the behavior of aromatic polycarbonates PC and TMPC. This early onset of plasticization seems to be related also to the larger free volume in the amorphous phase of TMCBPC which favors high gas sorption. The diffusion coefficients for TMCBPC are also larger than those reported for the aromatic polycarbonates PC and TMPC. Ideal gas separation factors were found to follow the usual trend; that is, as permeability increases, the ideal separation factor decreases. © 1993 John Wiley & Sons, Inc.