Mesogen‐controlled ion channel of star‐shaped hard–soft block copolymers for solid‐state lithium‐ion battery

Novel star‐shaped hard–soft triblock copolymers, 4‐arm poly(styrene)‐block‐poly [poly(ethylene glycol) methyl ethyl methacrylate]‐block‐poly{x‐[(4‐cyano‐4′‐biphenyl) oxy] alkyl methacrylate} (4PS‐PPEGMA‐PMAxLC) (x = 3, 10), with different mesogen spacer length are prepared by atom‐transfer radical polymerization. The star copolymers comprised three different parts: a hard polystyrene (PS) core to ensure the good mechanical property of the solid‐state polymer, and a soft, mobile poly[poly(ethylene glycol) methyl ethyl methacrylate] (PPEGMA) middle sphere responsible for the high ionic conductivity of the solid polyelectrolytes, and a poly{x‐[(4‐cyano‐4′‐biphenyl)oxy]alkyl methacrylate} with a birefringent mesogens at the end of each arm to tuning the electrolytes morphology. The star‐shaped hard–soft block copolymers fusing hard PS core with soft PPEGMA segment can form a flexible and transparent film with dimensional stability. Thermal annealing from the liquid crystalline states allows the cyanobiphenyl mesogens to induce a good assembly of hard and soft blocks, consequently obtaining uniform nanoscale microphase separation morphology, and the longer spacer is more helpful than the shorter one. There the ionic conductivity has been improved greatly by the orderly continuous channel for efficient ion transportation, especially at the elevated temperature. The copolymer 4PS‐PPEGMA‐PMA10LC shows ionic conductivity value of 1.3 × 10^?4 S cm^?1 (25 °C) after annealed from liquid crystal state, which is higher than that of 4PS‐PPEGMA electrolyte without mesogen groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4341–4350     

Quadruple hydrogen bonding containing supramolecular thermoplastic elastomers: Mechanical and morphological correlations

We report the design of bioinspired, reversible supramolecular thermoplastic elastomers (TPEs) functionalized with ureido‐cytosine (UCyt) complementary quadruple hydrogen bonding (QHB) sites. The polymer contained a soft poly(n‐butyl acrylate) central block that imparted flexibility and two external, hard nucleobase‐containing blocks that contributed to structural integrity. In addition, the hard block with pendant QHB motifs served as efficient physical crosslinks to further enhance the thermomechanical performance, where the polymer service window extended up to 30 °C higher compared to the controls that bear dimeric hydrogen bonding units. The resulting UCyt copolymers also exhibited improved surface and bulk morphology, which self‐assembled into well‐ordered lamellar microstructures. Moreover, the polymer displayed an unexpected moisture‐resistant property with less than 1 wt % equilibrium moisture uptake even at 95% relatively humidity, which presumably correlated with its well‐ordered and densely‐packed morphology facilitated by strong hydrogen bonding. Variable temperature Fourier‐transform infrared spectroscopy experiments further confirmed the thermoreversibility of hydrogen bonding, indicating melt‐processablility and recyclability of the polymer. These physical properties verified quadruple bonding dominated behavior, and structure–property–morphology relationships suggest key design parameters for future TPEs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 13–23     

Self‐assembly and morphology of polydimethylsiloxane supramolecular thermoplastic elastomers

Functionalization of polydimethylsiloxanes (PDMS) polymers with hydrogen‐bonding ureidopyrimidinone (UPy) groups leads to supramolecular thermoplastic elastomers. In previous studies, no lateral stacking of UPy dimers was observed in UPy‐functionalized polymers, unless additional urethane or urea groups were built into the hard block. However, we have shown that when PDMS is used as the soft block, this lateral aggregation of UPy dimers does take place, since long fibers could be observed in the atomic force microscopy (AFM) phase image. Also in bulk, the presence of these interactions was proven by oscillatory shear experiments. We attribute this aggregation to the incompatibility of soft block and hard block, leading to phase separation. Moreover, we have shown that additional urethane or urea groups in the hard block do lead to materials with more fibers and higher melting points. For the UPy‐urea functionalized PDMS even single fibers are observed with AFM when dropcasted from a very diluted solution. When the length of the soft block is increased, the morphology changes from fibrous to spherical. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3877–3885, 2008     

Stimuli‐Responsive Self‐Assembly of a Naphthalene Diimide by Orthogonal Hydrogen Bonding and Its Coassembly with a Pyrene Derivative by a Pseudo‐Intramolecular Charge‐Transfer Interaction

A naphthalene diimide (NDI) building block containing hydrazide (H1) and hydroxy (H2) groups self‐assembled into a reverse‐vesicular structure in methylcyclohexane by orthogonal H‐bonding and π‐stacking. At an elevated temperature (LCST=43 °C), destruction of the assembled structure owing to selective dissociation of H2–H2 H bonding led to macroscopic precipitation. Further heating resulted in homogeneous redispersion of the sample at 70 °C (UCST) and the formation of a reverse‐micellar structure. In the presence of a pyridine (H3)‐functionalized pyrene (PY) donor, a supramolecular dyad (NDI–PY) was formed by H2–H3 H‐bonding. Slow transformation into an alternate NDI–PY stack occurred by a folding process due to the charge‐transfer interaction between NDI and PY. The mixed NDI–PY assembly exhibited a morphology transition from a reverse micelle (with a NDI–PY mixed‐stack core) below the LCST to another reverse micelle (with a NDI core) above the UCST via a “denatured” intermediate.     

Biodegradable aliphatic thermoplastic polyurethane based on poly(ε‐caprolactone) and L‐lysine diisocyanate

A biodegradable aliphatic thermoplastic polyurethane based on L ‐lysine diisocyanate and 1,4‐butanediol hard block segments, and 2000 g/mol poly(ε‐caprolactone) diol soft block segments was synthesized. The resulting polymer was a tough thermoplastic with ultimate tensile strength of 33 MPa and elongation of 1000%. The polymer displayed classic segmented thermoplastic elastomer morphology with distinct hard block and soft block phases. Thermal and dynamic mechanical analyses determined that the material has a useful service temperature range of around ?40 °C to +40 °C, making it an excellent candidate for low‐temperature elastomer and film applications, and potentially as a material for use in temporary orthopedic implant devices. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2990–3000, 2006     

Temperature‐responsive “tadpole‐shaped” protein–polymer hybrids and their self‐assembly behavior

The temperature‐responsive poly (N, N‐diethylacrylamide) (pDEAAm) with narrower molecular weight distribution was prepared by the atom transfer radical polymerization and characterized by ¹HNMR and gel permeation chromatography. The temperature‐responsive “tadpole‐shaped” BSA–pDEAAm hybrids were fabricated via a free Cys‐34 residue of bovine serum albumin (BSA) site specifically binding to the end group disulfide bonds of pDEAAm and characterized by native‐polyacrylamide gel electrophoresis (Native‐PAGE) and matrix‐assisted laser desorption/ionization time of flight mass spectrometry. Their temperature‐responsive behaviors were measured by ultraviolet‐visible spectra (UV‐Vis). The lower critical solution temperature (LCST) of the pDEAAm was identified as 28°C, and the LCST of BSA–pDEAAm hybrids was identified as 31°C. The morphologies of BSA–pDEAAm hybrids self‐assembled in the aqueous solutions with two different temperatures at 25 °C and 40°C were investigated by transmission electron microscopy. Below the LCST of BSA–pDEAAm hybrids, the separate spherical nanoparticles were observed. In contrast, bundles and clusters were observed above the LCST of BSA–pDEAAm hybrids. The results suggested that the self‐assembly morphology of BSA–pDEAAm hybrids depended upon the pDEAAm block in BSA–pDEAAm hybrids, and the morphology transitions were effected by the LCST of BSA–pDEAAm hybrids. It would be expected to be used in biomedicine and materials science. Copyright © 2016 John Wiley & Sons, Ltd.     

Combining Modular Ligation and Supramolecular Self‐Assembly for the Construction of Star‐Shaped Macromolecules

A well‐defined random copolymer of styrene (S) and chloromethylstyrene (CMS) featuring lateral chlorine moieties with an alkyne terminal group is prepared (P(S‐co‐CMS), = 5500 Da, PDI = 1.13). The chloromethyl groups are converted into Hamilton wedge (HW) entities (P(S‐co‐HWS), = 6200 Da, PDI = 1.13). The P(S‐co‐HWS) polymer is subsequently ligated with tetrakis(4‐azidophenyl)methane to give HW‐functional star‐shaped macromolecules (P(S‐co‐HWS))₄, = 25 100 Da, PDI = 1.08). Supramolecular star‐shaped copolymers are then prepared via self‐assembly between the HW‐functionalized four‐arm star‐shaped macromolecules ( P(S‐co‐HW )) ₄ and cyanuric acid (CA) end‐functionalized PS (PS–CA, = 3700 Da, PDI = 1.04), CA end‐functionalized poly(methyl methacrylate) (PMMA–CA, = 8500 Da, PDI = 1.13) and CA end‐functionalized polyethylene glycol (PEG–CA, = 1700 Da, PDI = 1.05). The self‐assembly is monitored by ¹H NMR spectroscopy and light scattering analyses.     

Biocatalytic Self‐Assembly of Supramolecular Charge‐Transfer Nanostructures Based on n‐Type Semiconductor‐Appended Peptides

The reversible in situ formation of a self‐assembly building block (naphthalenediimide (NDI)–dipeptide conjugate) by enzymatic condensation of NDI‐functionalized tyrosine ( NDI‐Y ) and phenylalanine‐amide ( F‐NH₂ ) to form NDI‐YF‐NH₂ is described. This coupled biocatalytic condensation/assembly approach is thermodynamically driven and gives rise to nanostructures with optimized supramolecular interactions as evidenced by substantial aggregation induced emission upon assembly. Furthermore, in the presence of di‐hydroxy/alkoxy naphthalene donors, efficient charge‐transfer complexes are produced. The dynamic formation of NDI‐YF‐NH₂ and electronic and H‐bonding interactions are analyzed and characterized by different methods. Microscopy (TEM and AFM) and rheology are used to characterize the formed nanostructures. Dynamic nanostructures, whose formation and function are driven by free‐energy minimization, are inherently self‐healing and provide opportunities for the development of aqueous adaptive nanotechnology.     

Synthesis and self‐assembly of rod‐coil molecules with n‐shaped rod building block

The rod‐coil molecules with n‐shaped rod building block, consisting of an anthracene unit and two biphenyl groups linked together with acetylenyl bonds at the 1,8‐position of anthracene as a rigid rod segment, and the alkyl or alkyloxy chains with various length (i.e., methoxy‐ ( 1 ), octyl‐ ( 2 ), hexadecyl‐ ( 3 )) at the 10‐position of anthracene and poly(ethylene oxide) with the number of repeating units of 7 connected with biphenyl as coil segments were synthesized. The molecular structures were characterized by ¹H NMR and MALDI‐TOF mass spectroscopy. The self‐assembling behavior of new type of molecules 1–3 was investigated by means of DSC, POM, and SAXS at the bulk state. These molecules with a n‐shaped rod building block segment self‐assemble into supramolecular structures through the combination of π–π stacking of rigid rod building blocks and microphase separation of the rod and coil blocks. SAXS studies reveal that molecules 1 and 2 show hexagonal columnar and rectangular columnar structures in the liquid crystalline phase, respectively; meanwhile, molecules 1–3 self‐organize into lamellar structures in the crystalline state. In addition, self‐assembling studies of molecules 1–3 by DLS and TEM indicated that these molecules self‐assemble into elongated nanofibers in aqueous medium. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1415–1422, 2010     

Multiblock Copolymer‐Based Dual Dynamic Disulfide and Supramolecular Crosslinked Self‐Healing Networks

A new multiblock copolymer self‐healing strategy is reported that centers on the synthesis of block copolymers designed with different self‐healing motifs incorporated into individual blocks. As a proof of concept, a novel pentablock copolymer (ABCBA) consisting of a poly(ethylene glycol) middle block and self‐healable symmetric blocks of a polymethacrylate with pendant disulfide linkages and carboxylic acids is synthesized by a combination of consecutive controlled radical polymerization with hydrolytic cleavage. Disulfide exchange reactions of pendant disulfide linkages and metal–ligand interactions of pendant carboxylic acids with ferric ions allow for the formation of dual crosslinked networks with dynamic disulfide and supramolecular crosslinkages. The resultant networks possessing self‐healing viscoelasticity enable self‐healing on macroscale damages through supramolecular metal–ligand interactions and disulfide exchange reactions at room or moderate temperatures. These preliminary results suggest that the strategy can offer the versatility in the development of multifunctional self‐healable materials in dual or multiple self‐healable mechanisms.

     

Facile Synthesis of Supramolecular Ionic Polymers That Combine Unique Rheological,Ionic Conductivity,and Self‐Healing Properties

A new family of supramolecular ionic polymers is synthesized by a simple method using (di‐/tri‐)carboxylic acids and (di‐/tri‐)alkyl amines. These polymers are formed by carboxylate and ammonium molecules that are weakly bonded together by a combination of ionic and hydrogen bonds, becoming solid at room temperature. The supramolecular ionic polymers show a sharp rheological transition from a viscoelastic gel to a viscous liquid between 30 and 80 °C. This sharp viscosity decrease is responsible for an unprecedented jump in ionic conductivity of four orders of magnitude in that temperature range. As a potential application, this chemistry can be used to develop polymeric materials with self‐healing properties, since it combines properties from supramolecular polymers and ionomers into the same material.     

A Rapidly Self‐Healing Supramolecular Polymer Hydrogel with Photostimulated Room‐Temperature Phosphorescence Responsiveness

Development of self‐healing and photostimulated luminescent supramolecular polymeric materials is important for artificial soft materials. A supramolecular polymeric hydrogel is reported based on the host–guest recognition between a β‐cyclodextrin (β‐CD) host polymer (poly‐β‐CD) and an α‐bromonaphthalene (α‐BrNp) polymer (poly‐BrNp) without any additional gelator, which can self‐heal within only about one minute under ambient atmosphere without any additive. This supramolecular polymer system can be excited to engender room‐temperature phosphorescence (RTP) signals based on the fact that the inclusion of β‐CD macrocycle with α‐BrNp moiety is able to induce RTP emission (CD‐RTP). The RTP signal can be adjusted reversibly by competitive complexation of β‐CD with azobenzene moiety under specific irradiation by introducing another azobenzene guest polymer (poly‐Azo).     

β‐Lactam functionalized poly(isoprene‐b‐ethylene oxide) amphiphilic block copolymers

Amphiphilic block copolymers containing β‐lactam groups on the polyisoprene block were synthesized from poly(isoprene‐b‐ethylene oxide) (IEO) diblock copolymer precursors, prepared by anionic polymerization. β‐Lactam functionalization was achieved via reaction of the polyisoprene (PI) block with chlorosulfonyl isocyanate and subsequent reduction. The resulting block copolymers were molecularly characterized by SEC, FTIR, and NMR spectroscopies and DSC. Functionalization was found to proceed in high yields, altering the solubility properties of the PI block and those of the functionalized diblocks. Hydrogen bond formation is assumed to be responsible for the decreased crystallinity of the poly(ethylene oxide) block (PEO) in the bulk state as indicated by DSC measurements. The self‐assembly behavior of the β‐lactam functionalized poly(isoprene‐b‐ethylene oxide) copolymers (LIEO) in aqueous solutions was studied by dynamic light scattering (DLS), static light scattering (SLS), fluorescence spectroscopy, and atomic force microscopy (AFM). Nearly spherical loose aggregates were formed by the LIEO block copolymers, having lower aggregation numbers and higher cmc values compared to the IEO precursors, as a result of the increased polarity of the β‐lactam rings incorporated in the PI blocks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 24–33, 2010     

Star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one): Synthesis and characterization

New star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one) (PDXO) has been synthesized through ring‐opening polymerization initiated by SnOct₂/pentaerythritol. The star‐shaped PDXO was end‐functionalized by acrolyol chloride to form acrylate end groups. The end‐functionalized PDXO was photocrosslinked initiated by 2,2‐dimethoxy‐2‐phenylacetophenone. The gel content ranged from 80 to 99%, indicating a high degree of crosslinking. The thermal properties of the star‐shaped PDXO and the photocrosslinked PDXO were analyzed by differential scanning calorimetry. The glass‐transition temperature was determined to approximately ?32 °C for the crosslinked PDXO. The viscosity numbers were determined for star‐shaped PDXO, with reference to linear homologues. The star‐shaped PDXO had lower viscosity numbers than the linear counterparts. The crosslinked PDXO showed a rather hydrophilic surface as compared with other resorbable polyesters. The advancing contact angle was 64 ± 2, and the receding angle was 57 ± 4. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2049–2054, 2002     

Multicomponent supramolecular thermoplastic elastomer with peptide‐modified nanofibers

Bioactive nanofibers present a promising synthetic niche for in vivo applications due to their morphological and functional resemblance to the extracellular matrix. Potentially interesting nanofibers are constructed from the hard‐segment regimes in well‐defined thermoplastic elastomers (TPEs). The supramolecular interactions between these hard segments cause physical crosslinking by the formation of nanofibers and provide excellent mechanical properties. Here, we make use of a new class of biocompatible supramolecular TPEs, in which both the formation of the main chain and the hard block is based on multiple hydrogen‐bonding interactions. A self‐assembly process is explored to arrive at well‐defined peptide‐modified nanofibers embedded in a biocompatible soft matrix. Crucial for the success in the synthetic design is the use of an exact match between the molecular recognition units of the peptide and the supramolecular unit that takes care of forming the supramolecular nanofibers of the TPE. Evidence for the strong anchoring of the modified peptides in the hard‐segment nanofibers of the supramolecular TPE is provided by simple extraction experiments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,micellization and gelation of temperature‐responsive star‐shaped block copolymers

A series of amphiphilic temperature‐responsive star‐shaped poly(D,L‐lactic‐co‐glycolic acid)‐b‐methoxy poly(ethylene glycol) (PLGA‐mPEG) block copolymers with different arm numbers were synthesized via the arm‐first method. Gel permeation chromatography data confirmed that star‐shaped PLGA‐mPEG copolymers had narrow polydispersity index, indicating the successful formation of star‐shaped block copolymers. Indirectly, the ¹H NMR spectra in two kinds of solvents and dye solubilization method had confirmed the formation of core‐shell micelles. Further, core‐shell micelles with sizes of about 30–50 nm were directly observed by transmission electron microscopy. Subsequently, the micellar sizes and distributions as a function of concentrations and temperature were measured. At various copolymer concentrations, individual micelles with size of 20–40 nm and grouped micelles with size of 600–700 nm were found. Micellar mechanism of star‐shaped block copolymers in aqueous solution was simultaneously discussed. In addition, sol–gel transition of star‐shaped block copolymers in water was also investigated via the inverting test method. The critical gel temperature (CGT) and critical gel concentration (CGC) values of two‐arm, three‐arm and four‐arm copolymer solutions were markedly higher than ones of one‐arm copolymer. Moreover, the same CGC values of copolymer solution with different molecular weight and the same arm composition were ~15 wt %, and CGT values increased from ~38 to ~47°C with increasing arm numbers. Finally, the temperature‐dependent micellar packing gelation mechanism of star‐shaped block copolymer was schematically illustrated. Copyright © 2013 John Wiley & Sons, Ltd.     

Segmental orientations and deformation mechanism of a poly(ether‐block‐amide) film

Simultaneous measurements of microscopic infrared dichroism, mesoscale deformation, and macroscopic stress have been made for a microphase‐separated film of poly(ether‐block‐amide) 4033 during uniaxial stretching at temperatures between 30 and 91 °C, well below the melting point of the hard polyamide‐12 (PA) domains. Before the onset of dramatic microstructural alterations, the true stress–strain relationship on the mesoscale can be described with an interpenetrating network model, and poly(tetramethylene oxide) (PTMO) soft segments undergo affine deformation. Beyond a threshold strain at which stress from the soft network becomes larger than that from the hard network, plastic deformation occurs in the hard PA domains, and this is accompanied by the downward derivations of the true stress and molecular orientation of PTMO blocks from the model predictions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1161–1167, 2005     

One Ligand in Dual Roles: Self‐Assembly of a Bis‐Rhomboidal‐Shaped,Three‐Dimensional Molecular Wheel

A facile high yield, self‐assembly process that leads to a terpyridine‐based, three‐dimensional, bis‐rhomboidal‐shaped, molecular wheel is reported. The desired coordination‐driven supramolecular wheel involves eight structurally distorted tristerpyridine (tpy) ligands possessing a 60° angle between the adjacent tpy units and twelve Zn²⁺ ions. The tpy ligand plays dual roles in the self‐assembly process: two are staggered at 180° to create the internal hub, while six produce the external rim. The wheel can be readily generated by mixing the tpy ligand and Zn²⁺ in a stoichiometric ratio of 2:3; full characterization is provided by ESI‐MS, NMR spectroscopy, and TEM imaging.     

Self‐assembly of di‐ and triblock PEG‐pentavaline amphiphiles

Nanoparticles formed from amphiphilic block copolymers can be used as drug delivery vehicles for hydrophilic therapeutics. Poly(ethylene glycol) (PEG)‐peptide copolymers were investigated for their self‐assembling properties and as consequent potential delivery systems. Mono‐ and dihydroxy PEGs were functionalized with a pentavaline sequence bearing Fmoc end groups. The molecular weight of the PEG component was varied to evaluate copolymer size and block number. These di‐ and tri‐block copolymers readily self‐assemble in aqueous solution with critical aggregation concentrations (CACs) of 0.46–16.29 μM. At concentrations above the CAC, copolymer solutions form spherical assemblies. Dynamic light scattering studies indicate these aggregates have a broad size distribution, with average diameters between 33 and 127 nm. The copolymers are comprised β‐conformations that are stable up to 80 °C, as observed by circular dichroism. This peptide secondary structure is retained in solutions up to 50% MeOH as well. The triblock copolymers proved to be the most stable, with copolymers synthesized from 10 kDa PEG having the most stable particles. Loading of carboxyfluorescein at 2–5 mol % shows that these copolymers have the potential to encapsulate hydrophilic drugs for delivery applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Parameters affecting transition temperatures of poly(lactic acid‐co‐polydiols) copolymer‐based polyester urethanes and their shape memory behavior

A series of polyester urethanes (PEUs) comprising poly(lactic acid‐co‐polydiol) copolymers as a soft segment, 4,4′‐diphenylmethane diisocyanate (MDI) and 1,4‐butanediol (BDO) as a hard segment were systematically synthesized. Soft segments, which were block copolymers of L ‐lactide (LA) and polydiols such as poly(ethylene glycol) and poly(trimethylene ether glycol), were prepared via ring opening polymerization. Glass transition temperatures (T_g) of the obtained PEUs were found strongly dependent on properties of copolymer soft segments. By simply changing composition ratio, type and molecular weight of polydiols in the soft segment preparation step, T_g of PEU can be varied in the broad range of 0–57°C. The synthesized PEUs exhibited shape memory behavior at their transition temperatures. PEUs with hard segment ratio higher than 65 mole percent showed good shape recovery. These findings suggested that it is important to manipulate molecular structure of the copolymer soft segment for a desirable transition temperature and design optimal soft to hard segment ratio in PEU for good shape recovery. Copyright © 2011 John Wiley & Sons, Ltd.