Density Functional Theory Mechanistic Study of Boron‐Catalyzed N‐Alkylation of Amines with Formic Acid: Formic Acid Activation by Silylation Reaction

New methodology for the alkylation of amines is an intriguing issue in both academia and industry. Recently, several groups reported the metal‐free B(C₆F₅)₃‐catalyzed N‐alkylation of amines, but the mechanistic details of these important reactions are unclear. Herein, a computational study was performed to elucidate the mechanism of the N‐alkylation of amines with formic acid catalyzed by the Lewis acid B(C₆F₅)₃ in the presence of hydrosilane. We found that the reaction started with the activation of formic acid through a novel model. Then, the high electrophilicity of the C center of the formic acid unit and the nucleophilic character of the amine resulted in a C?N coupling reaction. Finally, two sequential silyl‐group and H^? transfer steps occurred to generate the final product. Upon comparing the reaction barrier and the hydrogenation of indole, our mechanism is more favorable than that proposed by the group of Yu and Fu.     

N‐Methylacridinium Salts: Carbon Lewis Acids in Frustrated Lewis Pairs for σ‐Bond Activation and Catalytic Reductions

N‐methylacridinium salts are Lewis acids with high hydride ion affinity but low oxophilicity. The cation forms a Lewis adduct with 4‐(N,N‐dimethylamino)pyridine but a frustrated Lewis pair (FLP) with the weaker base 2,6‐lutidine which activates H₂, even in the presence of H₂O. Anion effects dominate reactivity, with both solubility and rate of H₂ cleavage showing marked anion dependency. With the optimal anion, a N‐methylacridinium salt catalyzes the reductive transfer hydrogenation and hydrosilylation of aldimines through amine–boranes and silanes, respectively. Furthermore, the same salt is active for the catalytic dehydrosilylation of alcohols (primary, secondary, tertiary, and ArOH) by silanes with no observable over‐reduction to the alkanes.     

Highly Efficient Ruthenium‐Catalyzed N‐Formylation of Amines with H2 and CO2

A highly efficient catalyst system based on ruthenium‐pincer‐type complexes has been discovered for N‐formylation of various amines with CO₂ and H₂, thus affording the corresponding formamides with excellent productivity (turnover numbers of up to 1 940 000 in a single batch) and selectivity. Using a simple catalyst recycling protocol, the catalyst was reused for 12 runs in N,N‐dimethylformamide production without significant loss of activity, thus demonstrating the potential for practical utilization of this cost‐effective process. A one‐pot two‐step procedure for hydrogenation of CO₂ to methanol via the intermediacy of formamide formation has also been developed.     

Palladium‐Catalyzed N‐Alkylation of Amides and Amines with Alcohols Employing the Aerobic Relay Race Methodology

Possibly because homogeneous palladium catalysts are not typical borrowing hydrogen catalysts and ligands are thus ineffective in catalyst activation under conventional anaerobic conditions, they had not been used in the N‐alkylation reactions of amines/amides with alcohols in the past. By employing the aerobic relay race methodology with Pd‐catalyzed aerobic alcohol oxidation being a more effective protocol for alcohol activation, ligand‐free homogeneous palladiums are successfully used as active catalysts in the dehydrative N‐alkylation reactions, giving high yields and selectivities of the alkylated amides and amines. Mechanistic studies implied that the reaction most probably proceeds via the novel relay race mechanism we recently discovered and proposed.     

Facile N‐Alkylation/N′‐Arylation Process: A Direct Approach to Aromatic Aminoalkyl Amines

An intriguing C?N transformation involving a catalyst‐free N‐alkylation/N′‐arylation process in a multicomponent reaction with secondary amines, cyclic tertiary amines and electron‐deficient aryl halides has been described. In this case, the N‐alkylation of secondary amines, utilizing cyclic tertiary amines as alkyl group sources, is enabled by a facile C?N cleavage. Such an operationally simple method could facilitate access to aromatic aminoalkyl amines, nitrogen‐containing bioactive molecules, in good to excellent yields.     

Directly Bridging Indoles to 3,3′‐Bisindolylmethanes by Using Carboxylic Acids and Hydrosilanes under Mild Conditions

A straightforward Lewis acid‐promoted protocol for 3,3′‐bisindolylmethanes (BIMs) synthesis by reductive alkylation of indoles at the C3 position with carboxylic acids in the presence of hydrosilane was developed for the first time. Instead of aldehydes, more readily available, stable, and easy‐to‐handle carboxylic acids have been employed as alternative alkylating agents. As an efficient organocatalyst, B(C₆F₅)₃ enables the reductive alkylation of various substituted indole derivatives with carboxylic acids with up to 98 % yield at room temperature and under neat conditions. This metal‐free strategy offers an alternative approach for the direct functionalization of indoles to BIMs with carboxylic acids and such protocol allows selective reduction of carboxylic acid to aldehyde in combination with C−C bond formation.     

Palladium‐Catalyzed para‐Selective Alkylation of Electron‐Deficient Arenes

Intermolecular alkylations of electron‐deficient arenes proceed with good para selectivity. Palladium catalysts were used to generate nucleophilic alkyl radicals from alkyl halides, which then directly add onto the arenes. The arene scope and the site of alkylation are opposite to those of classical Friedel–Crafts alkylations, which prefer electron‐rich systems.     

A Highly Active Bifunctional Iridium Complex with an Alcohol/Alkoxide‐Tethered N‐Heterocyclic Carbene for Alkylation of Amines with Alcohols

A series of new iridium(III) complexes containing bidentate N‐heterocyclic carbenes (NHC) functionalized with an alcohol or ether group (NHC? OR, R=H, Me) were prepared. The complexes catalyzed the alkylation of anilines with alcohols as latent electrophiles. In particular, biscationic Ir^III complexes of the type [Cp*(NHC‐OH)Ir(MeCN)]²⁺2[BF₄^?] afforded higher‐order amine products with very high efficiency; up to >99 % yield using a 1:1 ratio of reactants and 1–2.5 mol % of Ir, in short reaction times (2–16 h) and under base‐free conditions. Quantitative yields were also obtained at 50 °C, although longer reaction times (48–60 h) were needed. A large variety of aromatic amines have been alkylated with primary and secondary alcohols. The reactivity of structurally related iridium(III) complexes was also compared to obtain insights into the mechanism and into the structure of possible catalytic intermediates. The Ir^III complexes were stable towards oxygen and moisture, and were characterized by NMR, HRMS, single‐crystal X‐ray diffraction, and elemental analyses.     

Chromium‐Catalyzed Alkylation of Amines by Alcohols

The alkylation of amines by alcohols is a broadly applicable, sustainable, and selective method for the synthesis of alkyl amines, which are important bulk and fine chemicals, pharmaceuticals, and agrochemicals. We show that Cr complexes can catalyze this C?N bond formation reaction. We synthesized and isolated 35 examples of alkylated amines, including 13 previously undisclosed products, and the use of amino alcohols as alkylating agents was demonstrated. The catalyst tolerates numerous functional groups, including hydrogenation‐sensitive examples. Compared to many other alcohol‐based amine alkylation methods, where a stoichiometric amount of base is required, our Cr‐based catalyst system gives yields higher than 90 % for various alkyl amines with a catalytic amount of base. Our study indicates that Cr complexes can catalyze borrowing hydrogen or hydrogen autotransfer reactions and could thus be an alternative to Fe, Co, and Mn, or noble metals in (de)hydrogenation catalysis.     

Direct N‐Alkylation and Kemp Elimination Reactions of 1‐Sulfonyl‐1H‐Indazoles

The reactions of 1‐sulfonyl‐1H‐indazoles under basic conditions are discussed, and the direct N‐alkylation and Kemp elimination reactions of these compounds are reported. A series of 2‐(p‐tosylamino)benzonitriles and N‐alkyl indazoles were prepared in good yields. Moreover, the 2‐(p‐tosylamino)benzonitriles could be transformed into a diverse range of important derivatives in a one‐pot reaction. This method was successfully applied to the total syntheses of quindolinone and cryptolepinone; quindolinone was prepared in a one‐pot reaction from 1‐sulfonyl‐1H‐indazole.     

Enantioselective Copper‐Catalyzed Decarboxylative Propargylic Alkylation of Propargyl β‐Ketoesters with a Chiral Ketimine P,N,N‐Ligand

The first enantioselective copper‐catalyzed decarboxylative propargylic alkylation has been developed. Treatment of propargyl β‐ketoesters with a catalyst, prepared in situ from [Cu(CH₃CN)₄BF₄] and a newly developed chiral tridentate ketimine P,N,N‐ligand under mild reaction conditions, generates β‐ethynyl ketones in good yields and with high enantioselectivities without requiring the pregeneration of ketone enolates. This new process provides facile access to a range of chiral β‐ethynyl ketones in a highly enantioenriched form.     

Selective Iridium‐Catalyzed Alkylation of (Hetero)Aromatic Amines and Diamines with Alcohols under Mild Reaction Conditions

Selective amine alkylation : A P,N‐ligand‐stabilized iridium complex has been used as an efficient catalyst for the alkylation of (hetero)aromatic amines with alcohols at mild reaction temperatures and catalyst loadings as low as 0.1 mol % Ir (see scheme). The excellent selectivity of the catalyst for monoalkylation of the amine function has also been exploited for the N,N′‐dialkylation of diamines in both symmetric and nonsymmetric fashions.

     

Tris(pentafluorophenyl)borane‐Catalyzed Acceptorless Dehydrogenation of N‐Heterocycles

Catalytic acceptorless dehydrogenation is an environmentally benign way to desaturate organic compounds. This process is traditionally accomplished with transition‐metal‐based catalysts. Herein, a borane‐catalyzed, metal‐free acceptorless dehydrogenation of saturated N‐heterocycles is disclosed. Tris(pentafluorophenyl)borane was identified as a versatile catalyst, which afforded several synthetically important N‐heteroarenes in up to quantitative yield. Specifically, the present metal‐free catalytic system exhibited a uniquely high tolerance toward sulfur functionalities, and demonstrated superior reactivity in the synthesis of benzothiazoles compared to conventional metal‐catalyzed systems. This protocol can thus be regarded as the first example of metal‐free acceptorless dehydrogenation in synthetic organic chemistry.     

Cobalt‐Catalyzed Alkylation of Aromatic Amines by Alcohols

The implementation of inexpensive, Earth‐abundant metals in typical noble‐metal‐mediated chemistry is a major goal in homogeneous catalysis. A sustainable or green reaction that has received a lot of attention in recent years and is preferentially catalyzed by Ir or Ru complexes is the alkylation of amines by alcohols. It is based on the borrowing hydrogen or hydrogen autotransfer concept. Herein, we report on the Co‐catalyzed alkylation of aromatic amines by alcohols. The reaction proceeds under mild conditions, and selectively generates monoalkylated amines. The observed selectivity allows the synthesis of unsymmetrically substituted diamines. A novel Co complex stabilized by a PN₅P ligand catalyzes the reactions most efficiently.     

Palladium‐Catalyzed Hydroaminocarbonylation of Alkenes with Amines: A Strategy to Overcome the Basicity Barrier Imparted by Aliphatic Amines

A novel and efficient palladium‐catalyzed hydroaminocarbonylation of alkenes with aminals has been developed under mild reaction conditions, and allows the synthesis of a wide range of N‐alkyl linear amides in good yields with high regioselectivity. On the basis of this method, a cooperative catalytic system operating by the synergistic combination of palladium, paraformaldehyde, and acid was established for promoting the hydroaminocarbonylation of alkenes with both aromatic and aliphatic amines, which do not react well under conventional palladium‐catalyzed hydroaminocarbonylation.     

Rhodium‐Catalyzed Transnitrilation of Aryl Boronic Acids with Dimethylmalononitrile

An efficient transnitrilation of aryl boronic acids with dimethylmalononitrile (DMMN) is described. This rhodium‐catalyzed electrophilic cyanation presents a novel approach to prepare aryl nitriles by using a carbon‐bound cyanating reagent which undergoes cross‐coupling with the aryl boronic acid. The reaction expands the degree of functional‐group compatibility exhibited by the transnitrilation of aryl Grignard and aryllithium reagents. A variety of aryl boronic acid derivatives and dialkylmalononitriles were amenable to the transnitrilation.