Synergistic Effect of Phosphite with FuUerene C60 and Fullerenol C60（OH）24 as Antioxidants in Polypropylene

Polypropylene samples with fullerene C60, fullerenol C60（OH）24, 1010, C60/168, C60-OH/168 and 1010/168 as antioxidants were prepared by extrusions. MFR, YI, TGA and OIT of all the samples were tested. According to the results of MFR, during the melt extrusion, fullerene showed excellent stability effect on PP. The antioxidative ability of fullerene was comparable to the traditional antioxidant 1010. The antioxidative ability of fullerenol was not significant in the first extrusion and it accelerated the degradation of PP in the second and the third extrusions. TGA and OIT tests showed that the stability effects of fullerene and fullerenol were slightly lower than antioxidant 1010. In the first time, antioxidant 168 was reported to show great synergistic effects with fullerene and fullerenol as antioxidants, which sussested a simple way to enhance the antioxidative abilities of fullerene and fullerenol.     

A Quantum Chemical Study of C<Subscript>60</Subscript>Cl<Subscript>30</Subscript>, C<Subscript>60</Subscript>(OH)<Subscript>30</Subscript> Molecules and Fe@C<Subscript>60</Subscript>(OH)<Subscript>30</Subscript> Endocomplex

(U)PBE0/cc-pVDZ method is used to study the structure of C₆₀Cl₃₀, C₆₀(OH)₃₀ molecules and Fe@C₆₀(OH)₃₀ endocomplex. The triplet state of the endocomplex is shown to be the lowest in energy among its four states corresponding to different spin multiplicities and positions of Fe nucleus within the fullerene cavity. This state is characterized by bonding between the iron atom and one of two benzenoid cycles of the carbon cage, six internuclear Fe–C distances (208 pm), and 1s²2s²2p⁶3s²3p⁶3d^7.24s^0.14p^0.3 electron configuration of iron with spin population of 2.36.     

Synthesis of [<Superscript>14</Superscript>C] quincetone

Summary The water-soluble fullerene derivative C₆₀(OH)_x was radiolabeled with ⁶⁷GaCl₃. The labeling yields were determined by radio-PLC. The effects of pH, reaction time, temperature and the amount of C₆₀(OH)_x on the labeling yields were studied. The stability of ⁶⁷Ga-C₆₀(OH)_x was also examined. The results showed that the labeling yields could reach 97% under the best labeling conditions and the radiochemical purity of ⁶⁷Ga-C₆₀(OH)_x solution kept at 37 °C remained at 88% after 212 hours. The biodistribution studies of ⁶⁷Ga-C₆₀(OH)_x in mice showed a high localization of ⁶⁷Ga-C₆₀(OH)_x in the bone marrow, bone, liver and spleen with slow clearance and a negligible accumulation in the blood. These data suggest that the water-soluble C₆₀(OH)_x, having the same properties as microcolloids, may be used as a carrier of drug system for lymphatic targeting.     

Mass spectrometric determination of the electron affinity of C<Subscript>60</Subscript>(CF<Subscript>3</Subscript>)<Subscript>10</Subscript> and C<Subscript>60</Subscript>(CF<Subscript>3</Subscript>)<Subscript>12</Subscript> molecules

Knudsen cell mass spectrometry was used to study ion-molecular electron exchange reactions between some trifluoromethyl derivatives of C₆₀ fullerene. Electron affinity values were experimentally determined for C₆₀(CF₃)₁₀ and the S ₆ isomer of C₆₀(CF₃)₁₂ and compared with the results of calculations and the data in the literature.     

Synthesis of fullerene-silica hybrid materials

Fullerene/silica hybrid materials were obtained by radiation grafting on silica surface of toluene or decalin solutions of C₆₀. As determined by thermogravimetric analysis, the amount of C₆₀ grafted on silica surface was dependent from the radiation dose administered and independent from the C₆₀ concentration and the nature of the organic solvent. In absence of air, a dose of 48 kGy was sufficient to ensure a grafting level of 30% by weight of C₆₀ in the hybrid material. The fullerene/silica hybrid material shows a remarkable thermal stability, since the early decomposition starts above 300 °C as measured by DTG and DTA. The chemical structure of the fullerene/silica hybrid material was determined by FT-IR spectroscopy and with solid state ¹³C CP-MAS NMR. The potential application of such materials has been outlined.     

Octafluorocyclohexa derivatives of [60]fullerene: C<Subscript>60</Subscript>(C<Subscript>4</Subscript>F<Subscript>8</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 2, 3, 4, and 6)

Fluorocyclohexa adducts C₆₀(C₄F₈) _n were synthesized by high-temperature reaction of fullerene C₆₀ with 1,2-C₂F₄I₂ or 1,4-C₄F₈I₂ in sealed tubes. Their separation by HPLC allowed us to determine molecular structure (X-ray diffraction) of four new compounds C₆(C₄F₈) _n (n = 2, 3, 4, and 6). Structures of isomers C₆₀(C₄F₈) _n were discussed in terms of a concept of consecutive addition of C₄F₈ groups to the fullerene cage.     

A comparative study of the radial distribution of hydrogen on C<Subscript>20</Subscript>, C<Subscript>19</Subscript>Si,and C<Subscript>19</Subscript>B cage fullerenes: a Monte Carlo simulation

The radial distribution of hydrogen on C_20(cage) and C₁₉Si_(cage), and C₁₉B_(cage) fullerene structures is investigated at different temperatures (273 K, 293 K, 320 K, and 400 K) for the pressure range between 1 MPa and 30 MPa using the (N,V,T) Monte Carlo simulation. The gravimetric storage capacity and radial distribution function parameters show that, under the identical temperature and pressure conditions, the magnitude of the hydrogen radial distribution on the C₁₉B surface is larger than that on C₁₉Si and C₂₀. The calculated maximum of the gravimetric storage capacity for C₁₉B at 273 K and 30 MPa is 7.6%.     

The standard enthalpy of formation of fullerene chloride C<Subscript>60</Subscript>Cl<Subscript>30</Subscript>

A rotating-bomb calorimeter was used to measure the energy of combustion of crystalline fullerene chloride C₆₀Cl₃₀ · 0.09Cl₂, Δ_c U° = (?24474 ± 135 kJ/mol). The result was used to calculate the standard enthalpy of formation, Δ_f H° (C₆₀Cl₃₀, cr) = 135 ± 135 kJ/mol, and the C-Cl bond energy, 195 ± 5 kJ/mol. The C-X (X = F, F, Cl, and Br) bond energies in fullerene C₆₀ derivatives and other organic compounds are compared.     

Bioluminescent Enzymatic Assay as a Tool for Studying Antioxidant Activity and Toxicity of Bioactive Compounds

A bioluminescent assay based on a system of coupled enzymatic reactions catalyzed by bacterial luciferase and NADH:FMN‐oxidoreductase was developed to monitor toxicity and antioxidant activity of bioactive compounds. The assay enables studying toxic effects at the level of biomolecules and physicochemical processes, as well as determining the toxicity of general and oxidative types. Toxic and detoxifying effects of bioactive compounds were studied. Fullerenols, perspective pharmaceutical agents, nanosized particles, water‐soluble polyhydroxylated fullerene‐60 derivatives were chosen as bioactive compounds. Two homologous fullerenols with different number and type of substituents, C₆₀O_2–4(OH)_20–24 and Fe_0.5C₆₀(OH) _xO_y (x + y = 40–42), were used. They suppressed bioluminescent intensity at concentrations >0.01 g L^?1 and >0.001 g L^?1 for C₆₀O_2–4(OH)_20‐24 and Fe_0.5C₆₀(OH)_xO_y, respectively; hence, a lower toxicity of C₆₀O_2–4(OH)_20–24 was demonstrated. Antioxidant activity of fullerenols was studied in model solutions of organic and inorganic oxidizers; changes in toxicities of general and oxidative type were determined; detoxification coefficients were calculated. Fullerenol C₆₀O_2–4(OH)_20–24 revealed higher antioxidant ability at concentrations 10^?17?10^?5 g L^?1. The difference in the toxicity and antioxidant activity of fullerenols was explained through their electron donor/acceptor properties and different catalytic activity. Principles of bioluminescent enzyme assay application for evaluating the toxic effect and antioxidant activity of bioactive compounds were summarized and the procedure steps were described.     

Self-assembling of fullerene C<Subscript>60</Subscript> into (C<Subscript>60</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> clasters in aromatic solvents

Self-assembling of fullerene C₆₀ into (C₆₀) _n clusters in aromatic solvents was studied. The role of the π-π interactions and dispersion forces in the (C₆₀) _n cluster formation in these media is demonstrated using the data on the solubility of fullerene C₆₀ in these solvents and their ionization potentials and also spectral characteristics of fullerene C₆₀ in the range of 326–340 nm in different solvents.     

Molecular structures and thermochemistry of the derivatives of C<Subscript>24</Subscript> fullerene by attaching a variety of chemical groups

A series of exohedrally functionalized derivatives of the D ₆-symmetrical C₂₄ fullerene, with attached -CH₂OH, -CONH₂, -COOH, and -COH chemical groups, have been investigated by using density-functional theory approach at the UB3LYP/6-31G(d) level. According to the calculated results, the C₂₄(COOH) is the most stable structure, with −73.58 kcal mol⁻¹ value for the functionalization reaction energy and 3.16 eV for the dissociation energy, while C₂₄(CONH₂) displays the largest dipole moment (3.09 D). It was also found that the HOMO-LUMO energy gaps, the vertical ionization potentials (VIP), and vertical electron affinities (VEA) of these functionalized derivatives are similar to those of the more stable C₂₄ fullerene. Moreover, their corresponding HOMO and LUMO orbitals are mainly associated with the surface of the cage. Also, the vibrational frequencies of these derivatives are discussed. It was concluded that it would be possible to produce novel species for bio-medical applications by attaching selected chemical groups.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Analyzing the adsorption of blood plasma components by means of fullerene-containing silica gels and NMR spectroscopy in solids

The results from studying the adsorption of blood plasma components (e.g., protein, triglycerides, cholesterol, and lipoproteins of low and high density) using silica gels modified with fullerene molecules (in the form of C₆₀ or the hydroxylated form of C₆₀(OH) _x ) and subjected to hydration (or, alternatively, dehydration) are presented. The conditions for preparing adsorbents that allow us to control the adsorption capacity of silica gel and the selectivity of adsorption toward the components of blood plasma, are revealed. The nature and strength of the interactions of the introduced components (fullerene molecules and water) with functional groups on the silica surface are studied by means of solid state NMR spectroscopy (NMR-SS). Conclusions regarding the nature of the centers that control adsorption are drawn on the basis of NMR-SS spectra in combination with direct measurements of adsorption. The interaction of the oxygen of the hydroxyl group of silica gel with fullerene, leading to the formation of electron-donor complexes of C₆₀-H, C₆₀-OH, or C₆₀-OSi type, is demonstrated by the observed changes in the NMR-SS spectra of silica gels in the presence of fullerene.     

Interaction of polystyrene and fullerene C<Subscript>60</Subscript> in benzene: Composition and molecular properties of the product

The molecular properties and composition of fullerene-containing polystyrenes prepared through evaporation of solvent from the combined solution of a polymer and C₆₀ in benzene have been studied by viscometry, translational isothermal diffusion, GPC, UV spectroscopy, and electrooptical Kerr effect measurements. With this procedure of C₆₀ introduction into the polymer, a partial depolymerization of the parent polystyrene takes place. It has been shown that the composites contain fullerene in two forms: a smaller part of C₆₀ is bound to macromolecules, while a larger part of C₆₀ is incorporated into the composition of low-molecularmass adducts—the products arising from the interaction of fullerene with fullerene-induced depolymerized polystyrene.     

Electrochemical oxidation and reduction of osmium and iridium complexes with fullerene C<Subscript>60</Subscript>

The electrochemical oxidation and reduction of a series of complexes of platinum-group metals (Os, Ir, and Rh) with fullerene C₆₀ with common formula C₆₀[ML _n ] (ML _n is the metal and the metal-bonded ligands) in the tetrahydrofuran solution are studied using the method of cyclic voltammetry. The effect of metal and ligands on the variations in the redox properties of complexes and stability of anions, which are formed in the reduction, is considered. It is shown that all complexes studied are reduced more difficultly than free fullerene, and the reduced forms of metallofullerenes are less stable as compared with free fullerene anions.     

Palm-tree architectures derived from C60-terminated polystyrene

By grafting polystyryllithium (PSLi) or polyisoprenyllithium (PILi) onto the fullerene borne by the mono-adduct polystyrene (PS)-C₆₀ (≈90%) obtained upon reacting the fullerene with azide-terminated PS, fairly well-defined palm-tree like polymers PS_aC₆₀(PS_b)₅ and block copolymers PS_aC₆₀(PI)₅ could be obtained. In these architectures, 5 PS (PI) branches of equal length are connected to a PS trunk through a single fullerene molecule.     

The saturated hydrides of C<Subscript>60</Subscript>:F<Subscript>5</Subscript>F<Subscript>6</Subscript> PK F<Subscript>5</Subscript>F<Subscript>7</Subscript> isomers

The carbon cages composed of pentagons and heptagons (F₅F₇ isomers) are the analogs of fullerenes composed of pentagons and hexagons (F₅F₆ isomers). To provide insight into the structures and stability of the hydrides of F₅F₆ and F₅F₇ isomers, systematical density functional theory calculations are performed on all the 1,812 F₅F₆–C₆₀H₆₀ and 56 F₅F₇–C₆₀H₆₀. The calculated results demonstrate that the isomer with lowest/highest energy has most/fewest fused pentagons for both F₅F₆ and F₅F₇ hydrides and the stability of these hydrides increase with the number of fused pentagons roughly. The lowest energy F₅F₆–C₆₀H₆₀ and F₅F₇–C₆₀H₆₀ are 237.1 and 152.5 kcal/mol lower in energy than the isolated pentagon rule (IPR) C₆₀H₆₀, respectively; however, these two parent cages are 529.6 and 660.0 kcal/mol higher in energy than the IPR C₆₀. The calculations suggest that heptagon-containing cages, not only those violating the IPR can be the candidate cages for fullerene derivatives and the possible repulsion between the added atoms may play an important role in determining the structures and stability of the hydrides of carbon cages.     

Inertness of C<Subscript>60</Subscript> fullerene toward RO<Subscript>2</Subscript><Superscript>·</Superscript> peroxy radicals

The reactivity of fullerene C₆₀ toward peroxy radicals RO₂ ^· was tested by the chemiluminescence method. A comparison of the influence of C₆₀ and known inhibitors on the kinetics of liquid-phase chemiluminescence (CL) during oxidation of a series of hydrocarbons (ethyl-benzene, cyclohexane, n-dodecane, and oleic acid) shows that the fullerene does not react with the RO₂ ^· radicals. A sharp decrease in the CL intensity observed upon C₆₀ addition is caused by the quenching of CL emitters with fullerene but not by inhibition of hydrocarbon oxidation. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1808–1811, August, 2005.     

Electrochemical properties of transition metal complexes with C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerne ligands (review)

t-The electrochemical properties of exohedral complexes of transition metals with metallofragments coordinated to C₆₀ and C₇₀ fullerene ligands in different coordination modes are surveyed. The effect of the nature, composition, and structure of metal-containing fragments on the electrochemical properties of these complexes and stability of products formed in the oxidation and reduction of complexes is discussed.     

Synthesis of fullerene epoxide (C<Subscript>60</Subscript>O) by oxidation of fullerene C<Subscript>60</Subscript> with oxygen catalyzed by Mn(III), Ni(II), and Co(II) acetylacetonates

A procedure has been developed for the synthesis of fullerene monoepoxide C₆₀O via liquid-phase oxidation of fullerene C₆₀ in the presence of accessible catalysts [(Mn(acac)₃, Ni(acac)₂, and Co(acac)₂].