The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

Study of the Alkyl Chain Length on Laccase Stability and Enzymatic Kinetic with Imidazolium Ionic Liquids

The activity and stability of laccase and their kinetic mechanisms in water soluble ionic liquids (ILs): 1-butyl-3-methyl imidazolium chloride [C₄mim][Cl], 1-octyl-3-methyl imidazolium chloride [C₈mim][Cl], and 1-decyl-3-methyl imidazolium chloride [C₁₀mim][Cl] were investigated. The results show that an IL concentration up to 10% is satisfactory for initial laccase activity at pH 9.0. The laccase stability was well maintained in [C₄mim][Cl] IL when compared to the control. The inactivation of laccase increases with the length of the alkyl chain in the IL: [C₁₀mim][Cl] > [C₈mim][Cl] > [C₄mim][Cl]. The kinetic studies in the presence of ABTS as substrate allowed calculating the Michaelis–Menten parameters. Among the ILs, [C₄mim][Cl] was the suitable choice attending to laccase activity and stability. Alkyl chains in the ions of ILs have a deactivating effect on laccase, which increases strongly with the length of the alkyl chain.     

Nanoscale organization of ionic liquids and their interaction with peptides probed by C NMR spectroscopy

An NMR study of 10 l-alanine- and l-valine-containing peptides was carried out in the native [C₂MIM][Cl], [C₄MIM][Cl], [C₆MIM][Cl], [C₄MIM][BF₄], [C₄MIM][PF₆], and [C₄Py][BF₄] ionic liquid media. A unique high sensitivity of the ionic liquid system to the nature of peptide and ability to tune solvent–solute interactions were observed in contrast to regular organic solvents. The l-valine peptides can be selectively dissolved in [C₄MIM][Cl] and [C₆MIM][Cl], whereas their solubility in [C₂MIM][Cl] and other ionic liquids was dramatically lower. In spite of structural similarity between the amino acids, a distinct behavior was observed for the l-alanine peptides. Solvent–solute interactions with an ionic liquid impose significant changes, and NMR spectroscopy is a useful probe for the molecular-level and nanoscale organization of the studied systems. An even/odd effect of the number of amino acids in the peptide on molecular interactions in ionic liquids was observed. Enhancement of chemical properties of peptides in ionic liquids and application of ionic liquids in the separation of peptides are the areas of practical interest in the studied systems.     

Phase Behavior of Aqueous Biphasic Systems with Choline Alkanoate Ionic Liquids and Phosphate Solutions: The Influence of pH

Aqueous biphasic systems (ABS) composed of the choline alkanoate ionic liquids (ILs) choline acetate [Cho][OAc], choline propanoate [Cho][Pro], choline butyrate [Cho][But], and choline hexanoate [Cho][Hex], mixed with K₃PO₄ solutions at pH 7.2 and 14.5, were prepared and their phase diagrams were compared. The ability to form ABS with alkaline K₃PO₄ solutions decreased in the order [Cho][OAc] ≈ [Cho][Pro] > [Cho][But] > [Cho][Hex], while with neutral K₃PO₄ solutions, [Cho][OAc] could not form an ABS, and the other three ILs performed similarly. All of the biphasic regions of the ABS decreased with the increase in pH. ¹H-NMR data indicated anion exchange between phases in ABS at neutral pH. The ABS at neutral pH were evaluated to extract the triazine herbicides simazine, cyanazine, and atrazine, and the ABS formed by [Cho][Pro] and the pH 7.2 K₃PO₄ solution has shown extraction recoveries higher than 90%.     

Effects of Cationic Structure on Cellulose Dissolution in Ionic Liquids: A Molecular Dynamics Study

In recent years, great progress has been made in the dissolution of cellulose with ionic liquids (ILs). However, the mechanism of cellulose dissolution, especially the role the IL cation played in the dissolution process, has not been clearly understood. Herein, the mixtures of cellulose with a series of imidazolium‐based chloride ionic liquids and 1‐butyl‐3‐methyl pyridinium chloride ([C₄mpy]Cl) were simulated to study the effect that varying the heterocyclic structure and alkyl chain length of the IL cation has on the dissolution of cellulose. It was shown that the dissolution of cellulose in [C₄mpy]Cl is better than that in [C₄mim]Cl. For imidazolium‐based ILs, the shorter the alkyl chain is, the higher the solubility will be. In addition, an all‐atom force field for 1‐allyl‐3‐methyl imidazolium cation ([Amim]⁺) was developed, for the first time, to investigate the effect the electron‐withdrawing group within the alkyl chain of the IL cation has on the dissolution of cellulose. It was found that the interaction energy between [Amim]⁺ and cellulose was greater than that between [C₃mim]⁺ and cellulose, indicating that the presence of electron‐withdrawing group in alkyl chain of the cation enhanced the interaction between the cation and cellulose due to the increase of electronegativity of the cations. These findings are used to assess the cationic effect on the dissolution of cellulose in ILs. They are also expected to be important for rational design of novel ILs for efficient dissolution of cellulose.     

Kinetics and mechanism of oxidation of dimethyl sulfoxide by chloramine-T in aqueous solution

The kinetics of oxidation of dimethyl sulfoxide (DMSO) by chloramine-T (CAT) is studied in HClO₄ and NaOH media with OsO₄ as a catalyst in the latter medium. In acid medium, the rate law is -d [CAT]/dt = k [CAT][DMSO][H⁺]. Alkali retards the reaction and the rate law takes the form -d [CAT]/dt = k [CAT][DMSO][OsO₄]/[NaOH], but is reduced to -d [CAT]/dt = k [CAT][DMSO] at higher alkali concentrations. The reaction is subjected to changes in (a) ionic strength, (b) concentrations of added neutral salts, (c) concentrations of added reaction product, (d) dielectric constant, and (e) solvent isotope effect, and the subsequent effects on the reaction rate are studied. The reaction mechanism in acid medium assumes an electrophilic attack by the free acid RNHCl (CAT′) at the sulfur site in DMSO, forming a reaction intermediate which subsequently decomposes to dimethyl sulfone on hydrolysis. Formation of a cyclic complex between RNHCl and OsO₄ which interacts with the substrate in a slow step explains the observed results in alkaline medium. The simplification of the rate equation at higher alkali concentrations is attributed to a direct reaction between chloramine-T and the substrate.     

“Through-Space” Relativistic Effects on NMR Chemical Shifts of Pyridinium Halide Ionic Liquids

We have investigated, using two-component relativistic density functional theory (DFT) at ZORA-SO-BP86 and ZORA-SO-PBE0 level, the occurrence of relativistic effects on the ¹H, ¹³C, and ¹⁵N NMR chemical shifts of 1-methylpyridinium halides [MP][X] and 1-butyl-3-methylpyridinium trihalides [BMP][X₃] ionic liquids (ILs) (X=Cl, Br, I) as a result of a non-covalent interaction with the heavy anions. Our results indicate a sizeable deshielding effect in ion pairs when the anion is I⁻ and I₃⁻. A smaller, though nonzero, effect is observed also with bromine while chlorine based anions do not produce an appreciable relativistic shift. The chemical shift of the carbon atoms of the aromatic ring shows an inverse halogen dependence that has been rationalized based on the little C-2s orbital contribution to the σ-type interaction between the cation and anion. This is the first detailed account and systematic theoretical investigation of a relativistic heavy atom effect on the NMR chemical shifts of light atoms in the absence of covalent bonds. Our work paves the way and suggests the direction for an experimental investigation of such elusive signatures of ion pairing in ILs.     

Palladium‐Catalyzed Enyne Cyclization of 2′‐Alkenyl 2‐Alkynoates in Imidazolium‐Type Ionic Liquids

The use of [bmim][BF₄], [bmim][PF₆], and [bmim][Cl] ILs as the solvents in Pd(II)‐catalyzed enyne cyclization of 2′‐alkenyl 2‐alkynoates in the presence of cupric chloride has been investigated. The Z/E stereoselectivity of the reaction could range from 90:10 to 4:96 by tuning the amount of LiCl in ILs. After the separation of the product, the IL–catalyst mixture could be recovered by treatment with hydrochloric acid and recycled several times without an obvious loss of catalytic activity.     

Isobaric vapor–liquid equilibria for ethanol–water system containing different ionic liquids at atmospheric pressure

Isobaric vapor–liquid equilibrium (VLE) data for ethanol–water systems containing ionic liquids (ILs) 1-methyl-3-methylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), 1-butyl-3-methylimidazolium bromide ([BMIM][Br]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) at atmospheric pressure (101.32 kPa) were measured with a circulation still. The results showed that the VLE of ethanol–water systems in the presence of different ILs was obviously different from that of the IL-free system. All ILs studied showed a salting-out effect, which gave rise to a change of the relative volatility of ethanol, and even to an elimination of the azeotropic point. It was found that the salting-out effect followed the order of [BMIM][Cl] > [BMIM][Br] > [BMIM][PF₆] and [MMIM][DMP] > [EMIM][DEP], which was ascribed to the preferential solvation ability of the ions resulting from the dissociation of the IL.     

Aggregation behavior of ionic liquids in aqueous solutions: effect of alkyl chain length, cations, and anions

Self aggregation of the ionic liquids, 1-butyl-3-methylimidazolium chloride [C4mim][Cl], 3-methyl-1-octylimidazolium chloride [C8mim][Cl], 1-butyl-3-methylimidazolium tetrafluoroborate [C4mim][BF4], N-butyl-3-methylpyridinium chloride [C4mpy][Cl], in aqueous solution has been investigated through 1H nuclear magnetic resonance (NMR) and steady-state fluorescence spectroscopy. Aggregation properties were determined by application of mass action theory to the concentration dependence of 1H NMR chemical shifts. Aggregation properties showed fairly good agreement with the previously reported results obtained from small angle neutron scattering, conductivity, and surface tension measurements. A detailed analysis of chemical shifts of water and various protons in ILs has been employed to probe the aggregate structure. Fluorescence spectroscopy provided important information about the critical aggregation concentration (cac) and the microenvironment of the aggregates. We could also observe a break point quite consistent with that of 1H NMR and fluorescence spectroscopy at cac from the concentration dependence of refractive index measurements. Standard free energies of aggregation DeltaGom of various ILs derived using the refractive index/concentration profiles were found comparable to those of classical ionic surfactants.     

Temperature-Dependent Surface-Enrichment Effects of Imidazolium-Based Ionic Liquids

We present the first systematic study of the influence of temperature on the degree of surface enrichment of 1-alkyl-3-methylimidazolium-based ionic liquids (ILs). Using angle-resolved X-ray photoelectron spectroscopy, we demonstrate that the degree of surface enrichment strongly decreases with increasing temperature for all the studied ILs. For ILs with the same cation, but different anions, [C₈C₁Im]Br, [C₈C₁Im][TfO] and [C₈C₁Im][Tf₂N], no significant differences of the temperature-induced partial loss of surface enrichment are found. Measurements for [C₄C₁Im][TfO], [C₈C₁Im][TfO] and [C₁₈C₁Im][TfO] indicate a small effect of the chain length. For [C₁₈C₁Im][TfO], a continuous decrease of alkyl surface enrichment is found with increasing temperature, with no abrupt changes at the phase-transition temperature from the smectic A to the isotropic phase, indicating that the surface enrichment is not affected by this phase transition.     

1‐Octanol/Water Partition Coefficients of 1Alkyl‐3‐methylimidazolium Chloride

The solubilities of 1alkyl‐3‐methylimidazolium chloride, [C_nmim][Cl], where n=4, 8, 10, and 12, in 1octanol and water have been measured by a dynamic method in the temperature range from 270 to 370 K. The solubility data was used to calculate the 1octanol/water partition coefficients as a function of temperature and alkyl substituent. The melting point, enthalpies of fusion, and enthalpies of solid–solid phase transitions were determined by differential scanning calorimetry, DSC. The solubility of [C_nmim][Cl], where n=10 or 12 in 1octanol is comparable and higher than that of [C₄mim][Cl] in 1octanol. Liquid 1n‐octyl‐3‐methylimidazolium chloride, [C₈mim][Cl], is not miscible with 1octanol and water, consequently, the liquid–liquid equilibrium, LLE was measured in this system. The differences between the solubilities in water for n=4 and 12 are shown only in α₁ and γ₁ solid crystalline phases. Additionally, the immiscibility region was observed for the higher concentration of [C₁₀mim][Cl] in water. The intermolecular solute–solvent interaction of 1butyl‐3‐methylimidazolium chloride with water is higher than for other 1alkyl‐3‐methylimidazolium chlorides. The data was correlated by means of the UNIQUAC ASM and two modified NRTL equations utilizing parameters derived from the solid–liquid equilibrium, SLE. The root‐mean‐square deviations of the solubility temperatures for all calculated data are from 1.8 to 7 K and depend on the particular equation used. In the calculations, the existence of two solid–solid first‐order phase transitions in [C₁₂mim][Cl] has also been taken into consideration. Experimental partition coefficients (log P) are negative at three temperatures; this is evidence for the possible use of these ionic liquids as green solvents.     

Insight into the cation–anion interaction in 1,1,3,3-tetramethylguanidinium lactate ionic liquid

In order to deepen the understanding of cation–anion interaction in ionic liquids (ILs), the structure and interionic interaction of 1,1,3,3-tetramethylguanidinium lactate ([tmg][L]) ion pair, including stable configuration, hydrogen bond, frontier molecular orbital, electron density, ion interaction energy and charge transfer, are studied by using ab initio calculations. It is found that more charge-localized character of [tmg][L], especially the C1 carbocation on [tmg]⁺, and the intermolecular –NH₂-associated hydrogen bonds can substantially increase the cation–anion interaction, the interaction energy is 65.3–109.3 kJ/mol higher than that of 1-n-butyl-3-methylimidazolium-based ILs. It is also found that the frontier molecular orbitals, i.e., the HOMO, HOMO + 1 of [L]⁻ and the LUMO, LUMO + 1 of [tmg]⁺, can effectively interact and more charges are transferred between cation and anion. Based on the above results, the physical property of ILs is discussed.     

Investigation of the Role of Ionic Liquids in Tuning the p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> Values of Some Anionic Indicators

The effect of imidazolium-based ionic liquids, ([C₁₂mim][Cl] and [C₈mim][Cl]), on the acid-base equilibria of two sulfonated indicators has been studied. The presence of ILs leads to decreased pK _a values because of the stronger electrostatic interaction of cationic ILs with the basic forms of the indicators with more negative charge. The longer alkyl side chain of [C₁₂mim][Cl] compared to [C₈mim][Cl] results in stronger hydrophobic interaction of this IL with the basic forms of the dyes leading to a more effective decrease in the pK _a values. Also, the transition points and transition intervals of the acid-base titration curves of the indicators were affected by the presence of ILs. It was found that the IL interaction with acid-base indicators also results in sharpening the acid-base titration curves of the indicators. From these observations, it is concluded that the presence of ILs can tune the pK _a values of indicators. All the experiments were performed spectrophotometrically and the results were obtained using curve fitting methods.     

The Synthesis of Anatase TiO2 Nanoparticles by Solvothermal Method using Ionic Liquid as Additive

The solvothermal reactions of Ti(OiPr)₄ in alcohol using ionic liquid as additive were investigated. In the presence of [BMIM][Cl], [BMIM][Br], [BMIM][NTf₂], [BMIM][SO₃Me], [BMIM][SO₄Me], or [BMIM][OTf] (BMIM = 1‐Butyl‐3‐methylimidazolium), pure anatase nanoparticles were obtained. The controlled hydrolysis of Ti(OiPr)₄ in the presence of ionic liquids to form titanium oxo clusters plays a key role in the formation of anatase nanostructures, and ionic liquids can be repeatedly used to synthesise anatase nanoparticles. However, in the presence of [BMIM][PF₆], [BMIM]₂[Ti(OH)₆] was obtained by an anion exchange reaction.     

Ionic Liquid Stabilized Niobium Oxoclusters Catalyzing Oxidation of Sulfides with Exceptional Activity

We present here a new class of niobium oxoclusters that are stabilized effectively by carboxylate ionic liquids. These functionalized ILs are designated as [TBA][LA], [TBA][PA], and [TBA][HPA] in this work, in which TBA represents tetrabutylammonium and LA, PA, and HPA refer to lactate, propionate, 3-hydroxypropionate anions, respectively. The as-synthesized Nb oxoclusters have been characterized by use of elemental analysis, NMR, IR, XRD, TGA, HRTEM. It was found that [TBA][LA]-stabilized Nb oxoclusters (Nb−OC@[TBA][LA]) are uniformly dispersed with an average particle size of 2–3 nm and afforded exceptionally high catalytic activity for the selective oxidation of various thioethers. The turnover number with Nb−OC@[TBA][LA] catalyst was over 56 000 at catalyst loading as low as 0.0033 mol % (1 ppm). Meantime, the catalyst also showed the high activity for the epoxidation of olefins and allylic alcohols by using only 0.065 mol % of catalyst (50 ppm). The characterization of ⁹³Nb NMR spectra revealed that the Nb oxoclusters underwent structural transformation in the presence of H₂O₂ but regenerated to their initial state at the end of the reaction. In particular, the highly dispersed Nb oxoclusters can absorb a large amount of polar organic solvents and thus were swollen greatly, which exhibited “pseudo” liquid phase behavior, and enabled the substrate molecules to be highly accessible to the catalytic center of Nb oxocluster units.     

Tracking the Micro-Heterogeneity and Hydrogen-Bonding Interactions in Hydroxyl-Functionalized Ionic Liquid Solutions: A Combined Experimental and Computational Study

Ionic liquids (ILs) are an important class of media that are usually used in combination with polar solvents to reduce costs and tune their physicochemical properties. In this regard, it is essential to understand the influence of adding solvents on the properties of ILs. In this work, the micro-heterogeneity and H-bonding interactions between a hydroxyl-functionalized IL, [HOEmim][TFSI], and acetonitrile (ACN) were investigated by attenuated total reflection Fourier transform infrared spectroscopy and molecular simulations. All studied IL-ACN mixtures were found to deviate from the ideal mixtures. The degree of deviations reaches the maximum at about x(ACN)=0.7 with the presence of both homogeneous clusters of pure IL/ACN and heterogeneous clusters of IL-ACN. With the addition of ACN to IL, the mixtures undergo the transformation from “ACN solvated in [HOEmim][TFSI]” to “[HOEmim][TFSI] solvated in ACN”. It is found that the newly formed H-bonding interactions between the IL and ACN is the main factor that contributes to the red shifts of O−H, C₂−H, C_4,5−H, and C_alkyl−H of [HOEmim]⁺ cation, and the blue shifts of C−D, C≡N of ACN, and C−F, S=O of [TFSI]⁻ anion. These in-depth studies on the mixtures of hydroxyl-functionalized IL and acetonitrile would help to understand the micro-heterogeneity and H-bonding interactions of miscible solutions and shed light on exploring their applications.     

High temperature and highly selective stationary phases of ionic liquid bonded polysiloxanes for gas chromatography

Due to the special performance of “dual nature” and synthetic flexibility, ionic liquids (ILs) have been an attractive research subject of stationary phases for gas chromatography (GC). In this work, a novel ionic liquid (IL) bonded polysiloxane ([PSOMIM][NTf₂]) with anion of bis-trifluoromethanesulfonylimide (NTf₂⁻) was synthesized, and another one with chloride anion ([PSOMIM][Cl]) was also prepared for the purpose of comparison. The thermo-stability of the product was evaluated by thermogravimetric (TG) test and the result indicated that [PSOMIM][NTf₂] did not decompose slightly until 380 °C. Then the solvation behaviors of the ILs were characterized using solvation parameter model. Subsequently, [PSOMIM][NTf₂] and [PSOMIM][Cl] were used as stationary phases to prepare capillary columns for GC, respectively. The column efficiency of [PSOMIM][NTf₂] column was 4776 plates/m (k = 3.64 ± 0.08, naphthalene), and that of the other one was 3170 plates/m (k = 2.84 ± 0.11, naphthalene). The selectivity of the novel stationary phases for analytes, including Grob reagent, aromatic positional isomers was further evaluated. Furthermore, the chromatograms of n-alkanes and polycyclic aromatic hydrocarbons (PAHs) on [PSOMIM][NTf₂] column were compared with that on [PSOMIM][Cl] column. [PSOMIM][NTf₂] stationary phase also exerted good selectivity for fatty acid methyl esters (FAMEs), polychlorinated biphenyls (PCBs) and aromatic amines.     

The effect of subcritical carbon dioxide on the dissolution of cellulose in the ionic liquid 1-ethyl-3-methylimidazolium acetate

The ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate ([emim][OAc]) readily dissolves high concentrations of cellulose. However, the high viscosity of [emim][OAc] (162 cP at 20 °C) could limit its use as a solvent for cellulose. Dissolved CO₂ has been shown to decrease the viscosity of ILs. In this study, a 50 psi CO₂ environment was applied for the dissolution of cellulose in [emim][OAc] to determine if the cellulose dissolution could be enhanced. Dissolution profiles of 4 wt% cellulose dissolved in [emim][OAc] were obtained over a 24 h period. A 75% increase in the amount of dissolved cellulose was observed with the application of a 50 psi CO₂ environment.     

Toxicity Measurement of Imidazolium Ionic Liquids Using Acute Toxicity Test

Ionic liquids (ILs) can be considered as environmentally friendly solvent, but they have the ability to dissolve in water and accumulate in the environment. Therefore, the toxicity of ILs should be assessed in order to prevent their harm to human and environment. This study was carried out to investigate the toxicity of ILs towards marine and freshwater fish. Three ILs have been tested, which are 1-Butyl-3-methylimidazolium hydrogen sulfate and 1-Butyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide toward marine fish and 1-Hexyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide toward freshwater fish. Two different marine fish were employed, which are: Cephalopholis cruentata (grouper) and Lates calcarifer (barramundi). For freshwater fish, male Poecilia reticulate (guppy) was employed. The toxicity tests were conducted according to OECD (Organisation for Economic Cooperation and Development) guideline 203. For 1-Butyl-3-methylimidazolium hydrogen sulphate [BMIM][HSO4], the median lethal concentration (LC50) estimated toward Cephalopholis cruentatato be 199.98 mg.L^-1. For 1-Butyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide [BMIM][TFSI], LC50 estimated toward LatesCalcariferto be 374.11 mg.L^-1. While, for 1-Hexyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide, [HMIM][NTf2], LC50 estimated toward Poecilia Reticulate to be 207.49 mg.L^-1. All the LC50 values obtained can be identified as practically nontoxic liquids based on Acute Toxicity Rating Scale by Fish and Wildlife Service (FWS). As to our knowledge, there is no previous reported toxicity studies of [BMIM][HSO4] and [BMIM][TFSI] on marine fish and [HMIM] [NTf2] on freshwater fish. Thus, this paper can be used as a benchmark for researchers who are dealing with these three ILs.