Influence of drying method on the material properties of nanocellulose I: thermostability and crystallinity

The effect of drying method on selected material properties of nanocellulose was investigated. Samples of nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNC) were each subjected to four separate drying methods: air-drying, freeze-drying, spray-drying, and supercritical-drying. The thermal stability and crystallinity of the dried nanocellulose were evaluated using thermogravimetric analysis (TGA) and X-ray diffraction. Supercritical-drying produced NFCs with the least thermal stability and the lowest crystallinity index. Air-drying or spray-drying produced NFCs which were more thermally stable compared with freeze-dried NFCs. The CNCs dried by the three methods (air-drying, freeze-drying, and spray-drying) have similar onset temperature of thermal degradation. The different drying methods resulted in various char weight percentages at 600 °C for the dried NFCs or CNCs from TGA measurements. The dried NFCs are pure cellulose I while the dried CNCs consist of cellulose I and II. The calculated crystallinity indices differ with each drying method. The cellulose II content in CNCs changes as a function of drying method. For the application of nanocellulose in non polar thermoplastics, spray-dried products are recommended according to their higher thermal stability and higher crystallinity index.     

Chemical reactions in dense monolayers: in situ thermal cleavage of grafted esters for preparation of solid surfaces functionalized with carboxylic acids

The thermodynamics of a chemical reaction confined at a solid surface was investigated through kinetic measurements of a model unimolecular reaction. The thermal cleavage of ester groups grafted at the surface of solid silica was investigated together with complementary physicochemical characterization of the grafted species. The ester molecules were chemically grafted to the silica surface and subsequently cleaved into the carboxylic acids. A grafting process of a reproducible monolayer was designed using the reaction of monofunctional organosilane from its gas phase. The thermal deprotection step of the ester end-group was investigated. The thermal deprotection reaction behaves in quite a specific manner when it is conducted at a surface in a grafted layer. Different organosilane molecules terminated by methyl, isopropyl and tert-butyl ester groups were grafted to silica surface; such functionalized materials were characterized by elemental analysis, IR and NMR spectroscopy, and thermogravimetric analysis, and the thermodynamic parameters of the thermal elimination reaction at the surface were measured. The limiting factor of such thermal ester cleavage reaction is the thermal stability of grafted ester group according to the temperature order: tert-butyl < i-propyl < methyl. Methyl ester groups were not selectively cleaved by temperature. The thermal deprotection of i-propyl ester groups took place at a temperature close to the thermal degradation of the organofunctional tail of the silane. The low thermolysis temperature of the grafted tert-butyl esters allowed their selective cleavage. There is a definite influence of the surface on the reaction. The enthalpy of activation is lower than in the gas phase because of the polarity of the reaction site. The major contribution is entropic; the negative entropy of activation comes from lateral interactions with the neighbor grafted molecules because of the high grafting density. Such reaction is an original strategy to functionalize the silica surface by carboxylic acid groups by means of a simple, reproducible, and efficient process involving in situ thermolysis of ester groups.     

Characterization of fatty acid methyl esters by thermal analysis

The thermal stability of selected straight-chain (C₆-C₁₄) esters of fatty acids has been studied by TG-DTG and DTA analysis. In DTG, a peak is detected between 84° and 125° C followed by a main effect in the range 105°–215°C, whereas in DTA only an exothermic peak appears in the range of 126.5° to 187°C (onset temperatures). The temperatures of these effects have been related with ignition points, molecular weights and boiling points. The characteristics of melting and recrystallization of the above fatty acid methyl esters and those with carbon numbers between C₁₄ and C₂₄ have been established by DSC along the melting range between ?83° and 50°C. Polymorphism appears in caproic, heptanoic, palmitic and stearic acid methyl esters.     

Synthesis,odor characteristics and thermal behaviors of pyrrole esters

A novel approach for transesterification of methyl pyrrole-carboxylate with alcohols is reported. The transformation is performed with t-BuOK and a series of new pyrrole ester were obtained under the optimized conditions. The odor characteristics of the pyrrolyl esters were evaluated by GC–MS-O (gas chromatography-mass spectrometry-olfactometry). Among them, compounds of 4-isopropylbenzyl 1H-pyrrole-2-carboxylate (3d) and naphthalen-2-ylmethyl 1H-pyrrole-2-carboxylate (3 l) present nuts and almond-like aroma, respectively. The Py-GC/MS (pyrolysis–gas chromatography/mass spectrometry) approach was applied to evaluate the pyrolysis intermediates of the pyrrole esters in oxidative conditions. It clarified that 3d and 3 l occurred different degrees of pyrolysis throughout the pyrolysis temperature from 30 °C to 900 °C. In addition, the TG (thermogravimetry) and DSC (differential scanning calorimeter) approaches were applied to investigate at the thermal degradation process. They have good thermal stability under certain temperature according to the results of TG analysis.     

Photodegradation of poly(vinyl esters)—I. Formation and quantitative measurement of volatile products

The high vacuum distillation technique for the analysis of photolysis products has highlighted both the extreme difficulty of removing residual solvent and the slow diffusion of photodegradation products from thin cast poly(vinyl ester) films, even at temperatures 130°C above T_g. Very long product collection periods at temperatures just below the onset of thermal degradation were used in order to obtain reliable quantitative data. The distributions of liquid-nitrogen condensable products indicated that a closer relationship exists between the photodegradation of poly(vinyl esters) and the photolysis of low molecular mass esters than previous results had suggested.     

Thermal degradation mechanism of poly(arylene sulfone)s by stepwise Py‐GC/MS

The thermal degradation of poly(ether sulfone) (PES) and polysulfone (PSF) was studied with a combination of thermogravimetric analysis and stepwise pyrolysis–gas chromatography/mass spectrometry techniques with consecutive heating of the samples at fixed temperature intervals (100 °C) to achieve narrow‐temperature pyrolysis conditions. The individual mass chromatograms of various pyrolysates were correlated with pyrolysis temperatures to elucidate the pyrolysis mechanism. The major mechanism for both PES and PSF was a one‐stage pyrolysis involving main‐chain random scission and carbonization. The major products SO₂ and phenol were released from the sulfone and ether groups in PES. The major products SO₂, phenol, and 1‐methyl‐4‐phenoxybenzene were released from the sulfone, ether, and isopropylene groups in PSF. In the PES, the thermal stability of the sulfone and ether groups was identical to the maximum thermogravimetric loss rate. In the PSF, the thermal stability was in the following order: sulfone < ether < isopropylene. The temperature of the maximum thermogravimetric loss rate was similar to the maximum evolution of phenol. However, there was a considerable difference in the thermal behavior of both polymers; the correlation of the polymer structure to the degradation mechanism is discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 583–593, 2000     

A pyrolysis mass spectrometry study of polythiophene copolymers

The thermal behaviour of copolymers of thiophene with decanedioic acid bis-(2-thiophen-3-yl-ethyl)ester (DATE) and terephthalic acid bis-(2-thiophen-3-yl-ethyl)ester (TATE) prepared by potentiostatic polymerization was studied via pyrolysis mass spectrometry. It was determined that the electrolytic films correspond to the related homopolymers. The increase in thermal stability of ester linkages, and evolution of characteristic degradation products of TATE and DATE together with thiophene based products above 400 °C confirmed copolymer formation.     

Isolation and characterization of cellulose nanocrystals from cloth hairs and evaluation of their compatibility with PLLA

Cellulose nanocrystals were successfully isolated from cloth hairs using phosphoric acid. The yields, degree of polymerization, morphology, average particle size, crystallinity, chemical structure, and thermal stability of the prepared nanocrystals were investigated. The results demonstrated that yields and degree of polymerization decreased with the increase of concentration of phosphoric acid due to preferential degradation of amorphous cellulose, resulting in high thermal stability and crystallinity. Morphological analysis revealed that hydrolysis was more homogeneous with increasing acid concentration. In comparison with the cellulose nanocrystals prepared with 6.5, 8.0, and 9.5 M H₃PO₄, those prepared with 11.0 M H₃PO₄ had the most uniform particle sizes. Moreover, the nanocrystals had important influence on the crystallization of semicrystalline polymer.     

Facile preparation and characterization of anatase TiO2/nanocellulose composite for photocatalytic degradation of methyl orange

Anatase TiO₂/nanocellulose composite was prepared for the first time via a one-step method at a relatively low temperature by using cellulose nanofibers as carrier and tetrabutyl titanate as titanium precursor. The morphology, structure and element composition of the composite were characterized by SEM, EDS, TEM, XRD, XPS and UV–vis DRS. The specific surface area and thermal stability of the composite were investigated by N₂ adsorption–desorption and thermogravimetric analysis, respectively, and the band gaps of the prepared photocatalysts were calculated based on the UV–vis DRS results. In addition, the prepared composite was used for the photocatalytic degradation of methyl orange (aqueous solution, 40 mg L⁻¹). It was found that the composite had a good morphology and anatase crystal structure, and Ti-O-C bond was formed between TiO₂ and nanocellulose. The specific surface area of composite was increased and the thermal stability was decreased compared with the cellulose nanofiber. Moreover, the degradation rate of methyl orange was achieved as 99.72% within 30 min, and no obvious activity loss was observed after five cycles. This work might give some insights into the design of efficient photocatalysts for the treatment of organic dye wastewater.     

Thermal degradation of trimethylolpropane/adipic acid hyperbranched poly(ester)s

Hyperbranched poly(ester)s offer attractive features for applications in a number of areas, particularly as platforms for the support of controlled release actives in the agricultural and biomedical fields. Such materials have been generated from trimethylolpropane and adipic acid, and fully characterized using chromatographic, spectroscopic, and thermal methods. The thermal stability of these polymers has been assessed using thermogravimetry and infrared spectroscopy. The degradation characteristics of these materials have been compared to those of two linear adipic acid polymers. The prominent feature of the thermal degradation of the hyperbranched poly(ester)s is ether formation while that for the comparable linear poly(ester)s is ester pyrolysis resulting in chain scission.     

Thermal stability of surface-esterified cellulose and its composite with polyolefinic matrix

Thermal stability of hydrophobized cellulose powders was investigated from the perspective of potential use as filler in non-polar polyolefinic matrix. The hydrophobization was done by heterogeneous esterification with three carboxylic acids which differ in chain length (3, 10 and 18 carbons). Data measured by means of thermogravimetry (TG) were recalculated according to model-free isoconversional method to construct time–temperature plots. It was demonstrated that the esterification significantly decreases thermal stability of the material, which reduces feasible processing window. Under non-oxidative atmosphere, the single-step decomposition of materials is prevailing, while the process is more complex in air. In both cases the oleic acid esters showed the lowest stability and the original cellulose was the most stable. Finally, all powders were compounded with polyethylene or polypropylene. Obtained composites were then subjected to color measurement and TG. Even though the materials were partly degraded, which was indicated by the yellowish hue of the composites, virtually no impact of the filler pyrolysis on the polymer matrix decomposition was observed, particularly in case of decanoyl esters.     

Thiophosphate esters of cashew nutshell liquid derivatives as new antioxidants for poly(methyl methacrylate)

In this work, poly(methyl methacrylate) films 1% additivated with new thiophosphate esters antioxidants derived from technical Cashew Nutshell Liquid (CNSL), a byproduct of the cashew nut (Anacardium occidentale L.) industry, were investigated by thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC) measurements under inert (N₂) and oxidative (synthetic air) atmospheres. Three new products were synthesized and characterized by GC/MS, ¹H and ³¹P NMR. The analyses were focused on the onset (T _e) and offset temperature (T _o) of degradation of the films, and on the maximum degradation temperature (T _MAX). It was observed that the thermal stability of the films increased with the addition of the thiophosphate ester antioxidants, which indicates that CNSL could be used as a natural source of phenolic material for the synthesis of antioxidants.     

Phosphorylated cellulose propionate derivatives as thermoplastic flame resistant/retardant materials: influence of regioselective phosphorylation on their thermal degradation behaviour

Cellulose ester derivatives having phosphoryl side-chains were synthesized by phosphorylation of two types of cellulose propionate (CP); the difference between the two CPs was whether the primary hydroxyl group at C6 had been fully propionylated or not. Dimethyl phosphate, dimethyl thiophosphate, diethyl phosphate, or diethyl thiophosphate was introduced into the residual hydroxyl positions of the CPs. Chemical composition of the respective derivatives was characterized by elemental analysis and a combined use of saponification and HPLC quantification of the released propionic acid. Their thermal properties were investigated by DSC and TGA, and an intermediate residue of the pyrolysis was also examined by FT-IR spectroscopy. From the thermal degradation measurements using TGA, the C6-O phosphorylation was found to noticeably prevent the CP derivatives from weight loss in the pyrolysis process under dynamic air, i.e., providing them with a flame-resistance functionality, whereas the C2-O and C3-O phosphorylation did not give rise to such an appreciable resistance effect. A discussion was focused on the difference in pyrolysis mechanism between the phosphorylated CPs. However, most samples of the CP derivatives showed a clear T _g considerably lower than the onset temperature of the thermal degradation. Thus we suggest that it is possible to design thermoplastic flame resistant/retardant materials based on cellulose, by controlling the substitution distribution of the phosphoryl and propionyl groups introduced.     

Synthesis and thermal self-crosslinking reaction of polymer containing spiro ortho ester and carboxylic acid

Polymers with both pendant spiro ortho ester and carboxylic acid moieties were synthesized by partial esterification of poly(methacrylic acid), poly(methacrylic acid-co-methyl methacrylate), or poly(methacrylic acid-co-styrene) with halomethylated spiro ortho esters in the presence of 1,8-diazabicyclo[5,4,0]undecene-7 in dimethyl sulfoxide. The extent of esterification increased with increasing reaction temperature. The reaction of polymeric carboxylic acids with chloromethylated spiro ortho esters proceeded to 80% of conversion at 100°C for 120 h. In contrast, the degree of esterification with bromomethylated spiro ortho ester reached 80% at 60°C within 24 h. Thermo-crosslinking of polymers having pendant spiro ortho ester moiety and carboxylic acid could be effected in films. The rate of spiro ortho ester ring-opening increased with increasing reaction temperature and with increasing content of carboxylic acid groups in the polymer. Further, the rates of gel production were also measured. The polymer containing an equimolar mixture of spiro ortho ester moieties and carboxylic acids exhibited the highest reactivity. In addition, it was found that thermal crosslinking reaction of the polymer occurred with minimum volume shrinkage.     

Deacetylation-induced changes in thermal properties of Sterculia urens gum

The thermal and mechanical properties of polystyrene (PS) modified with esters derivatives of 3-phenylprop-2-en-1-ol were investigated. The influence of the content of esters on the glass transition temperature, dynamic mechanical properties, flexural properties, hardness and thermal stability of PS has been examined. It was found that the PS/ester compositions were characterized by lower stiffness, lower values of T _g, lower hardness, lower stress at break, lower thermal stability and higher values of tg delta height and strain at break as compared to pure PS. The obtained results proved that esters derivatives of 3-phenylprop-2-en-1-ol can find their place as an environmentally friendly, external plasticizers of PS.     

Thermal behaviour and degradation of a liquid crystalline alkylene-aromatic polyester: Poly(decamethylene-fumaroyl-bis-4-oxybenzoate)

The thermal behaviour and degradation of an alkylene-aromatic liquid crystalline polyester, poly(decamethylene-fumaroyl-bis-4-oxybenzoate), were studied by thermogravimetric analysis under dynamic conditions and by pyrolysis-gas chromatography and pyrolysis-gas chromatography/mass spectrometry in the temperature range 450-650 °C. Among the degradation products detected, maleic anhydride, phenol, 4-hydroxybenzoic acid and the corresponding decenyl ester were the most abundant. The type and the composition of the pyrolysis products gave useful information about the mechanism of thermal degradation. The polyester decomposition starts with a free-radical scission in the mesogenic fragment and continues with electrocyclic reactions in the spacer. The influence of fullerene C₆₀ addition and of the deuteration of the decamethylene spacer on thermal behaviour and degradation were investigated.     

A novel route for synthesizing esters and polyesters from the Diels-Alder adduct of levopimaric acid and acrylic acid

A novel route for the esterification of the Diels-Alder adduct between abietic acid, in its isomer form of levopimaric acid, and acrylic acid was established. The high purity Diels-Alder adduct was prepared starting from rosin acids. When the adduct was subjected to a condensation reaction in the presence of a cyclic carbonate ester and of an efficient amine catalyst, hydroxyalkyl esters were obtained. The corresponding linear polyesters were synthesized by the advanced polycondensation of the above intermediates at high temperature, under vacuum, and in the presence of some adequate polyesterification catalysts. In the work 1,3-dioxolan-2-one as cyclic carbonate ester, triethylamine as esterification catalyst, and toluene-4-sulfonic acid monohydrate or tetrabutyl titanate as polycondensation catalysts, were preferred for exemplifications. The polyesters were soluble in dimethylacetamide, trichloromethane, tetrahydrofuran, 1,1,2,2-tetrachloroethane, or 1,4-dioxane. The thermal and electric studies showed that the polymers were substances with good thermal stability and high dielectric properties.     

Thermal degradation of linear polyurethanes and model biscarbamates

Thermal degradation of model biscarbamates, polyurethanes and poly(urethane-ureas) has been investigated by pyrolysis at atmospheric pressure. The biscarbamates were prepared from phenyl, benzyl, and cyclohexyl isocyanate and ethylene glycol. The polyurethanes and poly(urethane-ureas) were prepared from tolylene diisocyanate (TDI), xylylene diisocyanate (XDI), and 4,4′-dicyclohexylmethane diisocyanate (H₁₂-MDI) and poly(oxyethylene glycols) of various molecular weights. Rate constants for thermal degradation were obtained by measuring carbon dioxide evolution. The thermal degradation of all materials showed that the stability increased in the following manner: aromatic < aralkyl < cycloaliphatic. The separation and identification of the products of the thermal degradation gave an insight into the mechanisms involved in the pyrolysis of aromatic, aralkyl, and cycloaliphatic biscarbamates and the influence of temperature on these mechanisms.     

Formation of the main gas compounds during thermal analysis and pyrolysis: Betaine and betaine monohydrate

The thermochemical behaviour of betaine and betaine monohydrate was investigated under two degradation conditions. Betaine was heated up to 700°C at 10°C min^–1 in air and nitrogen flows and the evolved gas was analysed with the combined TG-FTRIR system. The evolved gas from betaine pyrolysis at 350 and 400°C was analysed by gas chromatography using mass-selective detection (Py-GC/MSD). In addition, the electron impact mass spectra of betaine and betaine monohydrate were measured.Esterification is one of the most important pyrolytic processes involving beta- ines. Even glycine betaine can change to dimethylglycine methyl ester via intermolecular transalkylation by heating. Trimethylamine, CO₂, and glycine esters were the main degradation products. Small amounts of ester type compounds evolved both in pyrolysis and with TG-FTIR. The monohydrate lost water between 35 and 260°C while the main decomposition took place at 245-360°C. The residual carbon burnt in air to CO₂ up to a temperature 570°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

Effect of zinc chloride on thermal decomposition of polymethacrylic and polyacrylic esters

Zinc chloride reduces the rate of thermal and thermooxidative decompositions of polymethacrylic esters and increases the thermal decomposition rate of polyacrylic esters. Mechanisms of the thermal decompositions of polymethacrylates and polyacrylates in the presence of ZnCl₂ have been suggested.For thermal decomposition polymethacrylic esters, the rate of depolymerization decreases due to the formation of cycles in a polymer chain by reaction of Zinc chloride with neighbouring ester groups. For thermooxidative decomposition of polymethacrylates, ZnCl₂ decreases also the rate of initiation of depolymerization and causes decomposition of hydroperoxide groups by a heterolytic mechanism. The increase in thermal decomposition rate of polyacrylic esters results from the high activity of complexes of ester groups and ZnCl₂ in decomposition reactions with formation of alcohol and CO₂ through Cameron mechanism.