二碘化钐促进的β-羟基不对称硒(碲)醚的合成

二芳基二硒(碲)醚在SmI2作用下, Se-Se(Te-Te)键还原断裂生成的硒(碲)负离子与环氧化物反应, 得到β-羟基不对称硒(碲)醚。     

基于炔烃参与的多组分聚合构建氧化还原双重响应型高分子药物载体

为了拓展多组分聚合方法在药物载体领域应用,基于铜催化的炔烃多组分聚合设计合成含有二硒键的氧化还原响应型两亲性聚合物,与阿霉素(DOX)在水溶液中通过自组装方式构建纳米载药胶束.通过实验技术手段对纳米载药胶束表征可知,纳米载药胶束的粒径在130 nm左右,临界胶束浓度(CMC)值为0.23 mg/mL,在人体正常生理条件下结构稳定.肿瘤中含有浓度较高的活性氧(ROS)或谷胱甘肽(GSH),聚合物主链中二硒键在氧化还原条件下断裂,导致聚合物降解,DOX从纳米载药胶束中逐渐释放,且累积释放量可达100%,并发现该类载药胶束在GSH环境中药物释放性能优于ROS环境.该工作通过多组分聚合方式可以便捷构建氧化还原双重响应型的两亲性聚合物,在肿瘤微环境中表现出特异的降解性能,为开发设计智能响应型高分子药物载体提供新的思路.     

迁移插入聚合法合成主链含金属聚合物 及其电化学性能研究

考察了迁移插入聚合技术在含金属主链聚合物上的合成。将易于获得的通过烷基间隔基相连的两个茂基二羰基铁(Fp)配合物AA和通过烷基间隔基相连的两个膦配体BB通过迁移插入进行聚合,得到稳定的含金属主链聚合物。在优化条件下,聚合物Mn高达13 950。所得聚合物通过NMR、IR、GPC、DLS、TEM、CV等进行了表征,所获得的含金属主链聚合物可溶于多种有机溶剂,并展现出可逆的氧化还原性质,氧化还原特性可随聚合物链在不同溶液中而变化,有机金属聚合物的氧化还原特性变化与聚合物链在溶液中的构型变化所引起的铁-羰基络合物的状态密切相关。含金属主链聚合物在H_2O-THF溶液中的自组装呈现规则的平均直径为142nm的聚集体。     

葡萄糖响应苯硼酸接枝壳聚糖盐酸盐抗肿瘤药物载体

通过分子改性向壳聚糖盐酸盐高分子链中引入苯硼酸基,合成了双亲性化合物苯硼酸接枝壳聚糖盐酸盐.细胞毒性实验表明苯硼酸接枝壳聚糖盐酸盐具有良好的细胞相容性.该双亲性化合物能够自组装成胶束聚集体,并包封疏水药物.以阿霉素为模型药物,研究了载药胶束聚集体的体外药物释放行为,结果表明,阿霉素在载药胶束聚集体内能够持续释放,且具有葡萄糖响应性.在生理p H=7.4和固体肿瘤弱酸性(p H=6.5)条件下,药物的释放速度十分缓慢,而当释放介质中有葡萄糖存在时,药物释放速度都明显加快.     

二碘化钐促进的硒代酯的合成

用SmI2/THF/HMPA体系在室温下使二芳基二硒醚中的Se-Se键还原断裂成硒负离子物种, 继而与酸酐作用得到硒代酯, 该反应条件温和中性, 产率良好, 提供了合成硒代酯的一个新途径。     

PLA-b-PEO-b-PLA三嵌段共聚物分子聚集体性质的研究

采用开环聚合的方法 ,合成了组成不同的PLA b PEO b PLA三嵌段共聚物 .滴加选择性溶剂水于共聚物的良溶剂溶液中 ,制备了共聚物以水为介质的“平头”聚集体胶束溶液 .把聚集体胶束溶液浇铸在云母片上 ,采用扫描探针显微镜 (SPM)表征了其形貌和表面微粘弹性 .发现脱离了极性介质水的聚集体的表面性质发生了不均一化 ,聚集体的顶部比相连接的部分具有较高的储能模量 .聚集体环境的改变使聚集体中不同嵌段的迁移导致了这种表面粘弹性的不均一 .另外 ,采用动态光散射的方法测量了体系溶液中聚集体胶束的尺寸 .实验发现光散射所得到的聚集体的尺寸远远大于SPM所得到尺寸 .增加聚合物的起始浓度使聚集体胶束的尺寸以及多分散性都在不同程度上增大 .然而聚合物的不同 ,这种增加的程度会有比较大的差别     

氧化石墨烯的制备及低温还原研究

用化学氧化法制备氧化石墨烯,并用一种新型的低温化学还原方法将其还原。用红外光谱、拉曼光谱、X射线衍射、X射线光电子能谱、扫描电镜、原子力显微镜等多种手段表征氧化石墨烯和还原氧化石墨烯的结构与形貌。结果表明,即使在低温条件下,壳聚糖依然可以还原氧化石墨烯,从而预示,在低温条件下,能够在同一环境下实现氧化石墨烯的还原和石墨烯的应用。     

中孔载体上组装Ti催化活性中心的研究Ⅲ. 中孔分子筛与钛化合物键合作用的红外光谱表征

FT-IR表征了中孔分子筛(HMS)载体与钛酸异丙酯、四氯化钛、酒石酸的键合作用, 这种键合作用均会诱导载体的硅氧四面体发生弱的畸变, 而在960 cm-1附近出现吸收谱带.键合温度、溶剂以及钛源均会影响谱带的位置和强度.测得的钛负载量与该谱带强度成正比.催化苯乙烯环氧化结果表明, 键合温度、钛源、钛中心配位环境对键合催化剂的活性和环氧化选择性均有较大的影响.     

含巯基/二硫键聚合物生物材料

含巯基/二硫键聚合物生物材料具有多种良好的性能,作为药物、基因等的释放载体在生物医学领域具有广泛的应用前景。随着基因工程和组织工程的发展,含巯基/二硫键聚合物生物材料的可生物降解性得到高度重视,而怎样改善其降解性能成为限制其应用的关键因素。由于二硫键在细胞外环境里保持稳定,在细胞溶质的还原环境中容易发生断裂,因此在制备新型基因、药物等释放载体上,二硫键充当了重要的角色,它的引入为聚合物生物材料的生物降解性能的设计与改善提供了一条重要的途径。本综述重点以聚合物水凝胶、聚合物微胶束、囊泡等为例,从巯基/烯的光聚合反应、Michael加成反应、氧化还原反应的角度,介绍了巯基/烯在聚合物中形成二硫键的不同途径的研究进展,并详细论述了基因载体、蛋白质载体、小分子药物载体三种还原敏感型材料的制备、表面修饰和改性的进展情况,进一步强调含巯基/二硫键聚合物生物材料的研究在生物医学领域应用的重要性。     

硼酸酯键在药物传递体系中的应用

刺激响应性药物载体由于其优异的控释性能,在生物医药领域引发了广泛的关注并得到了极为快速的发展.硼酸酯键因构筑条件简单、生物相容性好以及能够响应生物体内pH、葡萄糖、三磷酸腺苷(ATP)等多种微环境变化的优势被广泛用于刺激响应性药物载体的构筑.基于硼酸酯键的药物载体类型有药物-聚合物偶联、聚合物胶束、线性-超支化聚合物和介孔二氧化硅等,它们既能负载抗癌药物,又能递送胰岛素和基因.药物通过共价或非共价作用负载到载体上,并利用硼酸酯键在不同环境下的形成与断裂实现药物的可控释放.从药物类型、载体类型、药物与载体的结合方式以及硼酸酯键的断裂机制四个方面综述了硼酸酯键在药物传递体系中的应用,并对其当前面临的主要挑战和未来的发展趋势进行了总结和展望.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径--光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。