多嵌段共聚物(P4VP-b-PS-b-P4VP)_n的胶束化行为研究

研究了一系列具有不同链段长度和组成的聚4-乙烯基吡啶-聚苯乙烯-聚4-乙烯基吡啶多嵌段共聚物(P4VP-b-PS-b-P4VP)n在其选择性溶剂甲苯和pH<3的水中的胶束化过程,主要研究了多嵌段共聚物链段长度、溶液浓度和溶剂对其胶束形态的影响.透射电镜和原子力显微镜结果表明随着P4VP段链的相对增长,多嵌段共聚物在甲苯中的胶束形态由蠕虫链状向短棒状到球状胶束变化,而其在pH<3的水溶液中均形成球形胶束.由于特殊的链结构,聚合物的浓度对(P4VP-b-PS-b-P4VP)n多嵌段共聚物的胶束行为和胶束形态有着重要的影响.同时,(P4VP-b-PS-b-P4VP)n多嵌段共聚物分子量分布的多分散性对其在选择性溶剂中的胶束形态也有所影响.     

四臂星型聚苯乙烯-聚4-乙烯基吡啶嵌段共聚物纤维状胶束及负载金纳米粒子的研究

通过两步原子转移自由基聚合,制备了4种不同嵌段长度的四臂星型嵌段共聚物苯乙烯-聚4-乙烯基吡啶嵌段共聚物(PS-b-P4VP)4.在选择性溶剂甲苯中,随着嵌段长度的变化,自组装胶束的形态从球型到短棒状和纤维状的转变,其中(PS25-b-P4VP90)4自组装形成的以P4VP为核,以PS为花瓣型壳的纤维状胶束.以这种纤维状胶束作为模板,制备了金纳米粒子均匀分布的一维纳米材料     

PS-PMMA嵌段共聚物/PMMA在选择性溶剂中的自组装行为

用动态光散射和透射电镜研究了嵌段共聚物聚苯乙烯-聚甲基丙烯酸甲酯(PS-b-PMMA)和其对应的均聚物聚甲基丙烯酸甲酯(PMMA)在选择性溶剂四氢呋喃/环己烷(THF/CYH)中的自组装行为.选择性溶剂对PS嵌段是良溶剂,对PMMA嵌段和均聚物PMMA是非良溶剂,实验结果表明,在适当的分子量及组成条件下,PS-PMMA/PMMA在选择性溶剂中形成了单分散的纳米胶束,均聚物PMMA与PMMA嵌段一同形成了胶束的核,通过控制均聚物PMMA的量可以在较大的范围内调整胶束的尺寸.     

ABA两亲性嵌段共聚物在双选择性溶剂中自组装行为的Monte Carlo模拟

采用Monte Carlo模拟方法研究了ABA两亲性三嵌段共聚物在两种选择性溶剂中的自组装行为.模拟结果表明,在保证溶剂总浓度一定的情况下,改变两种选择性溶剂的体积比对于ABA两亲性嵌段共聚物自组装所形成的胶束形貌结构有很大影响.随着双选择性溶剂体积比的改变,体系中胶束形貌结构将会发生由囊泡到层状,再到环状、棒状直至球...     

显式溶剂模型模拟嵌段共聚物在纳米微滴中的图案化结构

采用耗散粒子动力学(DPD)方法研究了嵌段共聚物在纳米微滴中的相分离行为.模拟是将共聚物纳米微滴置于溶剂环境中进行自发相分离,从而形成一些图案化结构.由于是受限体系,所形成的结构和在溶液或熔融体中形成的相分离结构有所差异,这些结构的形成与亲/疏溶剂嵌段比例(RH/T)有关系.随着亲/疏溶剂嵌段比例的增加,依次形成了枣糕球体、排球状相、多层囊泡(洋葱相)、笼状相、纳米杆状相和分散胶束等结构.我们对洋葱相的形成过程进行了详细的描述.溶剂粒子的集群属性有助于更加深入地了解洋葱相的结构衍化.采用密度曲线分析了洋葱相的结构.在较高的亲/疏溶剂嵌段的比例条件下,嵌段共聚物主要表现为亲溶剂性,通过吸收大量的溶剂溶胀形成疏松结构或瓦解形成分散的胶束悬浮在溶剂中.本文模拟结果与理论或实验结果基本吻合.     

苯胺四聚体-聚乙二醇-苯胺四聚体嵌段共聚物薄膜的自组装

以氨基封端的苯胺四聚体为基础,以甲苯2,4-二异氰酸酯(TDI)为中间体制备了苯胺四聚体-聚乙二醇-苯胺四聚体(ANI₄-PEG-ANI₄,PEG600,M_n＝600)嵌段共聚物,并溶于乙醇/N,N-二甲基甲酰胺(DMF)混合溶剂后,涂覆于导电玻璃(ITO)表面制备成薄膜,利用原子力显微镜(AFM)、紫外-可见光谱(UV-Vis)和循环伏安(CV)等研究了薄膜的自组装及电化学行为等,讨论了诱导溶剂对嵌段共聚物薄膜形态和性能的影响. 研究发现,通过改变混合溶剂比和诱导溶剂种类,ANI₄-PEG-ANI₄嵌段共聚物薄膜可以实现多种形态的转变.     

AB型聚乙二醇单甲醚-聚(L-丙氨酸)嵌段共聚物自组装过程的核磁共振研究

利用核磁共振方法研究了AB型双嵌段共聚物(MPEG45-b-PA32)在选择性溶剂中的自组装行为及胶束化过程.嵌段共聚物在三氟乙酸中聚氨基酸和聚乙二醇链段均处于自由运动状态,聚丙氨酸链段为无规线团结构.在向该溶液中逐渐加入氘代水的过程中,聚丙氨酸链段又重新聚集形成规整的二级结构.结合1H-NMR和COSY谱分析,结果显示这一自组装过程伴随着聚(L-丙氨酸)链段由无规线团向α-螺旋结构的构象转变,同时嵌段共聚物逐渐形成核-壳型胶束结构.利用透射电镜观察了所形成胶束的形态,嵌段共聚物主要形成粒径150 nm到220 nm的球形胶束.     

聚苯乙烯-聚(4-乙烯基吡啶)嵌段共聚物LB膜结构形态的研究

采用氯仿作为铺展溶剂,将嵌段共聚物聚苯乙烯-聚(4-乙烯基吡啶)(PS-b-P4VP)稀溶液铺展于空气与水界面上,利用Langmuir-Blodgett(LB)膜技术转移至固体基底.研究了不同的嵌段比、表面压和小分子1-芘丁酸(PBA)的加入对嵌段共聚物气液界面聚集组装的影响.研究发现随着亲水段(P4VP)的增加,聚集组装结构由纳米片状、带状转变成纳米条状、纳米点状结构.表面压对纯PS-b-P4VP聚集组装产生影响,表面压增大,组装体排列紧密;随着表面压的继续增大,单层聚集结构遭到破坏,发生堆叠.加入PBA小分子后,PBA与PS-b-P4VP形成氢键,形态发生明显变化,原来的片状结构转变为条状或点状结构.     

分子间相互作用对聚肽共聚物/聚苯乙烯衍生物共混体系自组装形貌影响的研究

合成了两亲性的聚(γ-苄基-L-谷氨酸酯)-b-聚乙二醇(PBLG-b-PEG)聚肽刚-柔嵌段共聚物和聚苯乙烯(PS)均聚物及多种聚苯乙烯衍生物,包括聚(4-乙酰氧基苯乙烯)(PAS)均聚物、聚(4-羟基苯乙烯)(PVPh)均聚物和聚(苯乙烯-co-4-乙酰氧基苯乙烯)(P(S-co-AS))共聚物.用傅里叶变换红外光谱(FTIR)、核磁共振氢谱(1H-NMR)和凝胶渗透色谱(GPC)等表征了聚合物的结构、分子量及分布.采用共溶剂溶解、选择性溶剂透析的方法,制备了PBLG-b-PEG嵌段共聚物与不同PS衍生物(包括PS均聚物)共混体系的自组装聚集体,利用透射电子显微镜(TEM)和扫描电子显微镜(SEM)等表征了自组装体的形貌和结构.研究发现,不同的分子间相互作用(如π-π共轭作用、偶极-偶极相互作用、氢键作用等)对共混体系的自组装形貌有显著的影响.PBLG-b-PEG/PS共混体系自组装可形成表面具有条纹结构的"毛线球"聚集体,该体系中PBLG和PS之间形成π-π共轭作用,相互作用强度相对较弱;PBLG-b-PEG/PAS共混体系自组装可形成表面基本光滑并有轻微凹陷的球形聚集体,该体系中PBLG和PAS之间除了π-π共轭作用,还可形成相对较强的偶极-偶极相互作用;而PBLG-b-PEG/PVPh共混体系自组装得到了囊泡,该体系中PBLG与PVPh之间可形成π-π共轭和氢键作用,相互作用强度进一步增强.对于PBLG-b-PEG/P(S-co-AS)共混体系,可通过改变P(S-co-AS)共聚物中AS摩尔分数和制备温度来调控自组装聚集体表面的条纹形貌.根据PBLG链段与不同PS衍生物(包括PS均聚物)之间不同的分子间相互作用,提出了上述聚集体形貌转变的机理.     

嵌段共聚物纳米结构设计的计算机模拟研究

嵌段共聚物在本体或在选择性溶剂中可以通过微相分离或自组装形成各种各样的纳米结构,如层状相、球状、棒状及碟状胶束、双层膜、囊泡、纳米管等.这些纳米结构在药物输送、微电子学、先进材料等领域具有令人瞩目的应用前景.因此,研究嵌段共聚物形成纳米有序结构的过程以及理解复杂纳米结构的形成机理具有非常重要的意义.由于嵌段共聚物纳米聚...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.