Electron transfer cascade by organic/inorganic ternary composites of porphyrin, zinc oxide nanoparticles, and reduced graphene oxide on a tin oxide electrode that exhibits efficient photocurrent generation

A bottom-up strategy has been developed to construct a multiple electron transfer system composed of organic/inorganic ternary composites (porphyrin, zinc oxide nanoparticles, reduced graphene oxide) on a semiconducting electrode without impairing the respective donor-acceptor components. The hierarchical electron transfer cascade system exhibited remarkably high photocurrent generation with an incident-photon-to-current efficiency of up to ca. 70%.     

Photoinduced electron transfer at liquid|liquid interfaces: dynamics of the heterogeneous photoreduction of quinones by self-assembled porphyrin ion pairs

The initial stages of the heterogeneous photoreduction of quinone species by self-assembled porphyrin ion pairs at the water|1,2-dichloroethane (DCE) interface have been studied by ultrafast time-resolved spectroscopy and dynamic photoelectrochemical measurements. Photoexcitation of the water-soluble ion pair formed by zinc meso-tetrakis(p-sulfonatophenyl)porphyrin (ZnTPPS(4)(-)) and zinc meso-tetrakis(N-methylpyridyl)porphyrin (ZnTMPyP(4+)) leads to a charge-separated state of the form ZnTPPS(3)(-)-ZnTMPyP(3+) within 40 ps. This charge-separated state is involved in the heterogeneous electron injection to acceptors in the organic phase in the microsecond time scale. The heterogeneous electron transfer manifests itself as photocurrent responses under potentiostatic conditions. In the case of electron acceptors such as 1,4-benzoquinone (BQ), 2,6-dichloro-1,4-benzoquinone (DCBQ), and tetrachloro-1,4-benzoquinone (TCBQ), the photocurrent responses exhibit a strong decay due to back electron transfer to the oxidized porphyrin ion pair. Interfacial protonation of the radical semiquinone also contributes to the photocurrent relaxation in the millisecond time scale. The photocurrent responses are modeled by a series of linear elementary steps, allowing estimations of the flux of heterogeneous electron injection to the acceptor species. The rate of electron transfer was studied as a function of the thermodynamic driving force, confirming that the activation energy is controlled by the solvent reorganization energy. This analysis also suggests that the effective redox potential of BQ at the liquid|liquid boundary is shifted by 0.6 V toward positive potentials with respect to the value in bulk DCE. The change of the redox potential of BQ is associated with the formation of hydrogen bonds at the liquid|liquid boundary. The relevance of this approach toward modeling the initial processes in natural photosynthetic reaction centers is briefly discussed.     

Light-harvesting and photocurrent generation by gold electrodes modified with mixed self-assembled monolayers of boron-dipyrrin and ferrocene-porphyrin-fullerene triad

Three different kinds of mixed self-assembled monolayers have been prepared to mimic photosynthetic energy and electron transfer on a gold surface. Pyrene and boron-dipyrrin were chosen as a light-harvesting model. The mixed self-assembled monolayers of pyrene (or boron-dipyrrin) and porphyrin (energy acceptor model) reveal photoinduced singlet-singlet energy transfer from the pyrene (or boron-dipyrrin) to the porphyrin on the gold surface. The boron-dipyrrin has also been combined with a reaction center model, ferrocene-porphyrin-fullerene triad, to construct integrated artificial photosynthetic assemblies on a gold electrode using mixed monolayers of the respective self-assembled unit. The mixed self-assembled monolayers on the gold electrode have established a cascade of photoinduced energy transfer and multistep electron transfer, leading to the production of photocurrent output with the highest quantum yield (50 +/- 8%, based on the adsorbed photons) ever reported for photocurrent generation at monolayer-modified metal electrodes and across artificial membranes using donor-acceptor linked molecules. The incident photon-to-current efficiency (IPCE) of the photoelectrochemical cell at 510 and 430 nm was determined as 0.6% and 1.6%, respectively. Thus, the present system provides the first example of an artificial photosynthetic system, which not only mimics light-harvesting and charge separation processes in photosynthesis but also acts as an efficient light-to-current converter in molecular devices.     

Experimental determination of ionization potentials of tetraphenylporphine and metallotetraphenylporphines

Gas-phase ionization potentials of tetraphenylporphine and some metallotetraphenylporphines have been determined by the method of photocurrent measurements in nonpolar solvents reported previously [1]. The values obtained range from 5.9 to 6.3 eV, depending on the central metal ion, correlating well with the reported polarographic oxidation potentials. It has been concluded that photoelectron ejection from these complexes in isooctane occurs from the porphyrin π-system in all cases including Co(II) tetraphenylporphine, in which the electron is thought to be removed from the metal in polar solvents.     

Intersystem crossing versus electron transfer in porphyrin-based donor-bridge-acceptor systems: influence of a paramagnetic species

We have investigated how the spin state of an acceptor influences the photophysical processes in a donor-bridge-acceptor (D-B-A) system. The system of choice has zinc porphyrin as the electron donor and high- or low-spin iron(III) porphyrin as the acceptor. The spin state of the acceptor porphyrin is switched simply by coordinating imidazole ligands to the metal center. The D-A center-center distance is 26 A, and the bridging chromophore varies from pi-conjugated to a sigma-bonded system. The presence of a high-spin iron(III) porphyrin in such systems has previously been shown to significantly enhance intersystem crossing in the remote zinc porphyrin donor, whereas no significant electron transfer to the iron porphyrin acceptor was observed, even though the thermodynamics would allow for photoinduced electron transfer. Here, we demonstrate that by switching the acceptor to a low-spin state, the dominating photophysical process is drastically changed; the low-spin system shows long-range electron transfer on the picosecond time-scale, and intersystem crossing occurs at its "normal" rate.     

Hydrogen bonding effects on the surface structure and photoelectrochemical properties of nanostructured SnO2 electrodes modified with porphyrin and fullerene composites

Hydrogen bonding effects on surface structure, photophysical properties, and photoelectrochemistry have been examined in a mixed film of porphyrin and fullerene composites with and without hydrogen bonding on indium tin oxide and nanostructured SnO2 electrodes. The nanostructured SnO2 electrodes modified with the mixed films of porphyrin and fullerene composites with hydrogen bonding exhibited efficient photocurrent generation compared to the reference systems without hydrogen bonding. Atomic force microscopy, infrared reflection absorption, and ultraviolet-visible absorption spectroscopies and time-resolved fluorescence lifetime and transient absorption spectroscopic measurements disclosed the relationship between the surface structure and photophysical and photoelectrochemical properties relating to the formation of hydrogen bonding between the porphyrins and/or the C60 moieties in the films on the electrode surface. These results show that hydrogen bonding is a highly promising methodology for the fabrication of donor and acceptor composites on nanostructured semiconducting electrodes, which exhibit high photoelectrochemical properties.     

Preparation and photophysical and photoelectrochemical properties of a covalently fixed porphyrin-chemically converted graphene composite

Chemically converted graphene (CCG) covalently linked with porphyrins has been prepared by a Suzuki coupling reaction between iodophenyl-functionalized CCG and porphyrin boronic ester. The covalently linked CCG-porphyrin composite was designed to possess a short, rigid phenylene spacer between the porphyrin and the CCG. The composite material formed stable dispersions in DMF and the structure was characterized by spectroscopic, thermal, and microscopic measurements. In steady-state photoluminescence spectra, the emission from the porphyrin linked to the CCG was quenched strongly relative to that of the porphyrin reference. Fluorescence lifetime and femtosecond transient absorption measurements of the porphyrin-linked CCG revealed a short-lived porphyrin singlet excited state (38 ps) without yielding the porphyrin radical cation, thereby substantiating the occurrence of energy transfer from the porphyrin excited state to the CCG and subsequent rapid decay of the CCG excited state to the ground state. Consistently, the photocurrent action spectrum of a photoelectrochemical device with a SnO(2) electrode coated with the porphyrin-linked CCG exhibited no photocurrent response from the porphyrin absorption. The results obtained here provide deep insight into the interaction between graphenes and π-conjugated systems in the excited and ground states.     

LIGHT-INDUCED ELECTRICAL EFFECTS IN A LIQUID CRYSTAL BLM CONTAINING TCNQ

Abstract— The light-induced capacitance changes and also both photovoltage and photocurrent under continuous illumination have been investigated in pigmented liquid crystal bilayer membranes (PBLM)‡ containing TCNQ as photosensitizer with Na₂SO₃ electron donor on one side and methylene blue electron acceptor on the other side. The results have shown that TCNQ in cyanobiphenyl membrane produces a unique photoactive BLM system in which all three main parameters (conductivity, capacity and voltage across the membrane) are in a wide range altered by the light. It is shown that a TCNQ-cyanobiphenyl charge transfer complex is responsible for the observed photochanges. The possible mechanism of photoinduced electrical effects in this type of PBLM is discussed.     

Preparation and Photophysical and Photoelectrochemical Properties of a Covalently Fixed Porphyrin–Chemically Converted Graphene Composite

Chemically converted graphene (CCG) covalently linked with porphyrins has been prepared by a Suzuki coupling reaction between iodophenyl‐functionalized CCG and porphyrin boronic ester. The covalently linked CCG–porphyrin composite was designed to possess a short, rigid phenylene spacer between the porphyrin and the CCG. The composite material formed stable dispersions in DMF and the structure was characterized by spectroscopic, thermal, and microscopic measurements. In steady‐state photoluminescence spectra, the emission from the porphyrin linked to the CCG was quenched strongly relative to that of the porphyrin reference. Fluorescence lifetime and femtosecond transient absorption measurements of the porphyrin‐linked CCG revealed a short‐lived porphyrin singlet excited state (38 ps) without yielding the porphyrin radical cation, thereby substantiating the occurrence of energy transfer from the porphyrin excited state to the CCG and subsequent rapid decay of the CCG excited state to the ground state. Consistently, the photocurrent action spectrum of a photoelectrochemical device with a SnO₂ electrode coated with the porphyrin‐linked CCG exhibited no photocurrent response from the porphyrin absorption. The results obtained here provide deep insight into the interaction between graphenes and π‐conjugated systems in the excited and ground states.     

meso-四(对烷氧苯基)卟啉金属配合物的合成和性能研究(II)

合成了Zn、Pb两个系列卟啉金属配合物12个,其中6个为未见文献报道的新化合物,用元素分析、IR、UV、^1HNMR、MS确证了其结构。总结了Zn、Pb与卟啉类配体配合的IR、UV、^1HNMR判据。研究了这两个系列化合物的液晶性能,发现9个化合物具有液晶性。     

Engineering Chemically Exfoliated Large‐Area Two‐Dimensional MoS2 Nanolayers with Porphyrins for Improved Light Harvesting

Molybdenum disulfide (MoS₂) is a promising candidate for electronic and optoelectronic applications. However, its application in light harvesting has been limited in part due to crystal defects, often related to small crystallite sizes, which diminish charge separation and transfer. Here we demonstrate a surface‐engineering strategy for 2D MoS₂ to improve its photoelectrochemical properties. Chemically exfoliated large‐area MoS₂ thin films were interfaced with eight molecules from three porphyrin families: zinc(II)‐, gallium(III)‐, iron(III)‐centered, and metal‐free protoporphyrin IX (ZnPP, GaPP, FePP, H₂PP); metal‐free and zinc(II) tetra‐(N‐methyl‐4‐pyridyl)porphyrin (H₂T4, ZnT4); and metal‐free and zinc(II) tetraphenylporphyrin (H₂TPP, ZnTPP). We found that the photocurrents from MoS₂ films under visible‐light illumination are strongly dependent on the interfacial molecules and that the photocurrent enhancement is closely correlated with the highest occupied molecular orbital (HOMO) levels of the porphyrins, which suppress the recombination of electron–hole pairs in the photoexcited MoS₂ films. A maximum tenfold increase was observed for MoS₂ functionalized with ZnPP compared with pristine MoS₂ films, whereas ZnT4‐functionalized MoS₂ demonstrated small increases in photocurrent. The application of bias voltage on MoS₂ films can further promote photocurrent enhancements and control current directions. Our results suggest a facile route to render 2D MoS₂ films useful for potential high‐performance light‐harvesting applications.     

Bionano donor-acceptor hybrids of porphyrin, ssDNA, and semiconductive single-wall carbon nanotubes for electron transfer via porphyrin excitation

Photoinduced electron transfer in self-assemblies of porphyrins ion-paired with ssDNA wrapped around single-wall carbon nanotubes (SWCNTs) has been reported. To accomplish the three-component hybrids, two kinds of diameter-sorted semiconducting SWCNT(n,m)s of different diameter ((n,m) = (6,5) and (7,6)) and free-base or zinc porphyrin bearing peripheral positive charges ((TMPyP(+))M (tetrakis(4-N-methylpyridyl)porphyrin); M = Zn and H(2)) serving as light-absorbing photoactive materials are utilized. The donor-acceptor hybrids are held by ion-pairing between the negatively charged phosphate groups of ssDNA on the surface of the SWCNT and the positively charged at the ring periphery porphyrin macrocycle. The newly assembled bionano donor-acceptor hybrids have been characterized by transmission electron microscopy (TEM) and spectroscopic methods. Photoinduced electron transfer from the excited singlet porphyrin to the SWCNTs directly and/or via ssDNA as an electron mediator has been established by performing systematic studies involving the steady-state and time-resolved emission as well as the transient absorption studies. Higher charge-separation efficiency has been successfully demonstrated by the selection of the appropriate semiconductive SWCNTs with the right band gap, in addition to the aid of ssDNA as the electron mediator.     

μ-氧-双[meso-四(对烷氧基苯基)卟啉合铝(III)]的合成、表征和液晶性能研究

合成了一系列未见文献报道的μ-氧-双[meso-四(对烷氧基苯基)卟啉合铝(Ⅲ)]配合物. 用UV-vis, ¹H NMR, IR, MS和元素分析对各个化合物的结构进行了表征和确认, 发现在该系列配合物中两个卟啉分子通过Al—O—Al键形成二聚体. 用差示扫描量热仪(DSC)和偏光显微镜(PM)研究了其液晶性, 发现其中九个配合物具有液晶性, 多为升温单变液晶, 有一至两个中介相, 有确定的相转变温度、热焓和相变区间. 考察了取代基、金属离子和配合物的空间结构对液晶性能的影响.     

μ-氧-双[meso-四(对烷氧基苯基)卟啉合铁(III)]的合成、表征和液晶性

设计合成了未见文献报道的μ-氧-双[meso-四(对烷氧基苯基)卟啉合铁(III)]配合物9个, 研究了其合成、分离、纯化方法, 用MS, ¹H NMR, IR, UV, 元素分析等方法剖析确证了目标化合物的结构, 其结构我们认为是μ-氧桥联的二聚体结构, 且存在两种典型空间构象结构(重叠式和交叉式), 表现为同一系列化合物存在四类¹H NMR谱. 用差示扫描量热仪和偏光显微镜研究了这9个化合物的液晶性, 发现9个化合物均具有液晶性, 多为升温降温互变液晶, 具有丝状光学织构. 有一至三个中介相, 相变起始温度最低为－6 ℃, 最高为210 ℃; 相变区间最宽为301 ℃, 最窄为50 ℃; 清亮点(T_c)最高315 ℃, 最低147 ℃. 考察了烷氧基链长、配位金属离子及配合物分子空间结构对液晶性能的影响. 我们认为这种μ-氧桥联的二聚体结构比单层平面卟啉及其金属配合物具有更好的液晶性.     

含不同链长的三个卟啉LB膜修饰电极的光电响应研究

利用LB (Langmuir-Blodgett)技术将含不同链长的卟啉化合物(C4Py, C6Py和C8Py)单层膜转移到ITO (indium-tin oxide)导电玻璃上, 发现其具有良好的光电转换性质. 卟啉化合物修饰后的紫外吸收光谱与光电流工作谱重叠, 表明卟啉化合物起到了敏化光电流产生的效果; 而且电子给体、电子受体和偏压对其敏化效果的实验结果表明: 光诱导电子转移是产生光电响应的主要原因. 而且, 这三个卟啉化合物的光电响应性质与碳链长度相关, 其中含有六个碳链的C6Py表现出最佳的光电转化效果.     

Abnormal Cathodic Photocurrent Generated on an n‐Type FeOOH Nanorod‐Array Photoelectrode

A simple, wet‐chemical method for the synthesis of an FeOOH nanorod‐array photoelectrode on fluorine‐doped tin oxide (FTO) glass is reported. Nanorods of diameter about 35 nm and length about 300 nm have been vertically grown on an FTO substrate. Upon calcination, the FeOOH phase could be easily converted to a hematite structure while maintaining the shape of the nanorod array. An interesting abnormal cathodic photocurrent is generated on the FeOOH nanorod‐array photoelectrode under illumination, which is totally different from that obtained on a calcined hematite photoelectrode under the same experimental conditions. The cathodic photocurrent density generated on the FeOOH photoelectrode can also be tuned by applying an electrochemical anodic or cathodic treatment. Detailed analysis has revealed that higher valence state Fe^IV species in the FeOOH photoelectrode play an important role in sacrificing the photoexcited electrons for generation of the cathodic photocurrent. Comparison between the FeOOH and hematite photoelectrodes allows for a better understanding of the interplay between crystal structure, surface reactions, and photocurrent. The findings on this new abnormal phenomenon could also provide guidance for the design of new types of semiconducting photoelectrochemical devices.     

Regenerator dependent photoinduced desorption of a dicarboxylated cyanine dye from the surface of single-crystal rutile

A photon-initiated desorption of a dicarboxylated thiacarbocyanine dye from a dye-sensitized semiconducting oxide crystal has been observed when hydroquinone is used as a regenerator. No desorption was found under the same conditions when KI was used as the regenerator. Intermittent illumination experiments suggest that the oxidation products of the hydroquinone regenerator compete for dye adsorption sites. By comparing the photocurrent decay at both the dye monomer sensitization maximum and the dimer sensitization maximum, a rearrangement of monomer into dimer was observed. A kinetic model for the photocurrent decay as a function of desorption time was derived, and the desorption rate constants were obtained by fitting the experimental data to the model.     

氯化meso-四(对烷氧基苯基)卟啉合铁(Ⅲ)的合成、表征和性能

设计合成了10个氯化meso-四(对烷氧基苯基)卟啉合铁(Ⅲ)配合物, 其中7个尚未见文献报道. 用1H NMR, MS, IR, UV和元素分析等技术表征了该系列配合物的结构. 用差示扫描量热法和偏光显微镜研究结果表明8个配合物具有液晶性, 其液晶行为分别表现为升温单变液晶和升温降温互变液晶; 有1~2个中介相, 相变区间Δt最宽为128 ℃, Δt最窄为42 ℃, 液晶起始相变温度最高为80 ℃, 最低为42 ℃; 清亮点tc最高为181 ℃, 最低为110 ℃; 考察了烷氧基链长、配位金属离子及配合物分子空间结构对液晶性能的影响. 通过荧光光谱分析进一步验证了氯化卟啉合铁(Ⅲ)可以转化为μ-氧-双卟啉合铁(Ⅲ).     

Effect of interfaces on the alignment of a discotic liquid-crystalline phthalocyanine

This paper deals with the influence of the nature and number of solid interfaces on the alignment of the columns in a semiconducting discotic liquid crystal. The solid substrates have been characterized in terms of their roughness and surface energy. The alignment of the discotic liquid crystal columns on these substrates has been determined by optical microscopy under crossed polarizers and by tapping-mode atomic force microscopy. The nature of the substrates has negligible influence on the alignment. The key parameter is the confinement imposed to the film. These surprising observations are explained by the antagonist alignment role of gas and solid interfaces.     

Photoinduced electron transfer in self-assembled monolayers of porphyrin-fullerene dyads on ITO

Two porphyrin-fullerene dyads were synthesized to form self-assembled monolayers (SAMs) on indium-tin oxide (ITO) electrode, with either ITO-porphyrin-fullerene or ITO-fullerene-porphyrin orientations. The dyads contain two linkers for connecting the porphyrin and fullerene moieties and enforcing them essentially to similar geometries of the donor-acceptor pair, and two linkers to ensure the attachment of the dyads to the ITO surface with two desired opposite orientations. The transient photovoltage responses (Maxwell displacement charge) were measured for the dyad films covered by insulating LB films, thus ensuring that the dyads interact only with the ITO electrode. The direction of the electron transfer was from the photoexcited dyad to ITO independent of the dyad orientation. The response amplitude for the ITO-fullerene-porphyrin structure, where the primary intramolecular electron-transfer direction coincides with the direction of the final electron transfer from the dyad to ITO, was 25 times stronger than that for the opposite ITO-porphyrin-fullerene orientation of the dyad. Static photocurrent measurements in a liquid electrochemical cell, however, show only a minor orientation effect, indicating that the photocurrent generation is controlled by the processes at the SAM-liquid interface.