光促进温和条件下溴代烷烃与甲酸甲酯的羰基化反应

研究了光促进温和条件下,以甲酸甲酯为C1源,非贵金属钴盐、铜盐催化的溴代烷烃的羰基化反应.实验表明,在光促进下,钴盐、铜盐均可催化溴代烷烃与甲酸甲酯的羰基化反应,得到相应的羧酸甲酯.钴盐催化下,碱性添加物NaOAc对反应有很好的促进作用,直链溴代烷烃在反应中除了得到相应的正构酯外,还有少量异构酯生成;铜盐催化下,直链溴代烷烃在反应中主要生成相应的正构酯.机理研究表明,在光照下甲酸甲酯先分解为CO和CH3OH,再与溴代烷烃进行羰基化反应.     

Design and Synthesis of a-Cyclodextrin Modified Coumarin

以环氧氯丙烷为桥接,利用水溶性α-环糊精（α-CD）进行7-羟基-4-甲基香豆素的功能化修饰,得到新型α-环糊精修饰型香豆素衍生物（α-CD-C）.用傅里叶变换红外（FT-IR）光谱、氢核磁共振（1H NMR）、液质联用（LC-MS）等对该香豆素衍生物进行了结构表征.紫外光二聚实验表明,该α-环糊精修饰型香豆素可在365 nm光照下进行光二聚反应,且可在随后的254 nm光照下进行解二聚反应;同时通过比较该交替光照下的光二聚反应程度,可知该光二聚反应仅是部分可逆的.     

光促进下溴代烃在CH3OH/DMF体系中的羰基化反应

羰基化反应是有机合成中最重要的反应之一,其合成产品分别为醛、酮、酯、羧酸和酰胺等一系列化合物,可用作溶剂、增塑剂、润滑剂以及天然产物的替代品。卤代烷烃种类繁多,价格低廉,以其为底物进行羰基化反应,可以得到多种多样的羰基化合物。但常规羰基化反应往往需要高温(150-2     

新型2-苯并呋喃取代奠类衍生物的合成

以溴乙酰溴为酰化剂，对2-甲基奠进行酰基化反应，其酰化产物通过与水杨醛缩合，溴代反应及硫代乙酰胺的环化反应，以较好的收率，高选择性合成了新型的1-（2-苯并[b]呋喃酰基）奠和3-（2-苯并呋喃基）奠类[1，2-c]噻吩类衍生物，其结构经1HNMR，IR及元素分析表征。     

芳香杂环甲基卤代反应

总结了五元、六元及其它芳香杂环的甲基卤代的制备方法,如甲基呋喃、甲基嗯唑及甲基吡啶的溴化条件等。主要有三种方法：（1）芳香杂环甲基直接以N-溴代丁二酰亚胺（N-Bromosuccinimide,NBS）溴化。（2）以芳香杂环的羟基甲基与三苯基磷和四溴化碳反应。（3）通过预留卤代甲基来生成相应的芳香卤代甲基,如3-氯甲基-1H-吡唑-羧酸乙酯的合成。     

CoTPP电化学催化还原溴代环己烷的机理

以电化学循环伏安、现场ESR电化学以及现场薄层电化学方法研究了电生Co(Ⅰ)TPP与溴代环己烷的反应机制.在DMF中,Co(Ⅱ)/Co(Ⅰ)的氧化还原有明显的催化溴代环己烷还原的特征,反应现场有自由基生成.反应产物之一是Co-C键化合物,可以在-1.30V(SCE)一电子还原.当存在CH₂=CHCN时,生成另一种Co-C键化合物,该化合物在-1.10V(SCE)处一电子还原.证明溴代环己烷与Co(Ⅰ)TPP反应主要是经过形成烷基自由基的机制进行的.     

CoTPP电化学催化原溴代环己烷的机理

以电化学循环伏安、现场ＥＳＲ电化学以及现场薄层电化学方法研究了电生Ｃｏ（Ｉ）ＴＰＰ与溴代五己烷的反机制。在ＤＭＦ中，Ｃｏ（Ⅱ）／Ｃｏ（Ⅰ）的氧化还原有明显的催化溴代环己烷还原的特片，反现场有自由基生成，反应产物之一是Ｃｏ－Ｃ键化合物，可以在１．３０Ｖ（ＳＣＥ）－电子还原，当存在ＣＨ２－ＣＨＣＮ时，。生成另一种Ｃｏ－Ｃ键化合物，该化合物在－１．１０Ｖ（ＳＣＥ）处一电子还原，证明溴代环己烷与Ｃｏ（Ｉ）     

双(二环己基膦基)烷烃双(四氟硼酸盐)的合成

以溴代环己烷和亚磷酸二乙酯为原料制得二环己基氧化膦(2),用四氢铝锂还原得二环己基膦氢,经锂化后依次与二氯烷烃和四氟硼酸反应合成了对空气稳定的1,3-双（二环己基膦基）丙烷双（四氟硼酸盐）(4a)和1,4-双（二环己基膦基）丁烷双（四氟硼酸盐）(4b),收率分别为62%和65%,其结构经¹H NMR, ¹³C NMR, ³¹P NMR和元素分析表征。并对关键反应条件进行了优化。     

吡啶高三蝶烯的合成

2-溴-4-甲基吡啶（1）经氯代和碘代反应合成了2-溴-4-碘甲基吡啶（3）,3和蒽酮（4）反应生成10,10-二（2-溴-4-吡啶甲基）-9（10H）蒽酮（5）,5在3 MPa下与NaOCH3反应得到10,10-二（2-甲氧基-4-吡啶甲基）-9（10H）蒽酮（6）,6经硼氢化钠还原得到蒽醇（7）,7在对甲苯磺酸催化...     

对称桥头二取代金刚烷衍生物的合成

以易得的1-金刚烷甲酸为原料, 合成了一系列对称桥头二取代金刚烷衍生物. 由1-金刚烷甲酸经Koch-Haaf羰基化反应得到1,3-金刚烷二甲酸(1); 化合物1经还原得到1,3-金刚烷二甲醇(2); 化合物2在HBr-ZnBr₂体系中经溴代反应得1,3-二(溴甲基)金刚烷(3); 同时经Apple-Lee反应将化合物2转化得到1,3-二(氯甲基)金刚烷(4). 采用红外光谱和核磁共振氢谱等手段表征了产物的结构, 提出了可能的反应机理, 并对合成条件进行了优化.     

Impact of solvent quality on nanoparticle dispersion in semidilute and concentrated polymer solutions

We investigated how solvent quality affects the stability of polymer-grafted nanoparticles in semidilute and concentrated polymer solutions, which extends our previous studies on these types of dispersions in good solvents [Langmuir 2008, 24, 5260-5269]. As discussed in the current article, dynamic light scattering (DLS) was used to quantify the diffusion of polydimethylsiloxane-grafted silica nanoparticles, or PDMS-g-silica, in bromocyclohexane as well as in PDMS/bromocyclohexane solutions. We established that bromocyclohexane is a theta solvent for PDMS by varying the temperature of the solutions with PDMS-g-silica nanoparticles and detecting their aggregation at a theta temperature of T(Θ) = 19.6 °C. Using this temperature as a benchmark for the transition between good and bad solvent conditions, further stability tests were carried out in semidilute and concentrated polymer solutions of PDMS in bromocyclohexane at T = 10-60 °C. Irrespective of temperature, i.e., solvent quality, we found that the nanoparticles dispersed uniformly when molecular weight of the graft polymer was greater than that of the free polymer. However, when the free polymer molecular weight was greater than that of the graft polymer, the nanoparticles aggregated. Visual studies were also used to confirm the correspondence between nanoparticle stability and graft and free polymer molecular weights in a wide range of marginally poor solvents with PDMS. Further, the correspondence between nanoparticle stability and instability with graft and free polymer molecular weight and solvent quality was also supported with self-consistent mean-field calculations. Thus, by relating experiment and theory, our results indicate that nanoparticle stability in semidilute and concentrated polymer solutions is governed by interactions between the graft and free polymers under conditions of variable solvency.     

Characterization of room temperature phosphorescence of propranolol and the chiral discrimination between R- and S-isomers

Upon addition of a small amount of bromocyclohexane, propranolol displays room temperature phosphorescence in γ-cyclodextrin solution without deoxygenation. Several factors including the pH, and the concentration of γ-cyclodextrin and bromocyclohexane, which affect the room temperature phosphorescence (RTP) intensity and room temperature phosphorescence lifetime of propranolol are studied in detail. Under optimal conditions, the room temperature phosphorescence lifetimes of propranolol enantiomers are measured. The experimental results show that the associated phosphorescence decay curves can be best fitted to mono-exponential patterns and room temperature phosphorescence lifetimes of R- and S-propranolol are 4.60 ms and 5.74 ms, respectively. The difference of the room temperature phosphorescence lifetimes of R- and S-propranolol is 22.05%. Based on that, chiral discrimination of propranolol enantiomers is carried out successfully by time-resolved phosphorescence.     

Compact poly(ethylene oxide) structures adsorbed at the ethylammonium nitrate-silica interface

The adsorption of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) onto silica from ethylammonium nitrate (a protic ionic liquid) has been investigated using colloid probe AFM force curve measurements. Steric repulsive forces were measured for PEO, confirming that PEO can compete with the ethylammonium cation and adsorb onto silica. The range of the repulsion increases with polymer molecular weight (e.g., from 1.4 nm for 0.01 wt % 10 kDa PEO to 40 nm for 0.01 wt % 300 kDa PEO) and with concentration (e.g., from 16 nm at 0.001 wt % to 78 nm at 0.4 wt % for 300 kDa PEO). Fits to the force curve data could not be obtained using standard models for a polymer brush, but excellent fits were obtained using the mushroom model, suggesting the adsorbed polymer films are compressed and relatively poorly solvated. No evidence for adsorption of 3.5 kDa PPO could be detected up to its solubility limit.     

Investigation of six-membered carbocyclic compounds as a molecular switch block of room temperature phosphorescence in nondeoxygenated β-cyclodextrin solution

An aerated aqueous solution, intense room temperature phosphorescence (RTP) of nitrogen heterocyclic compounds (NHCs) and polyaromatic hydrocarbons (PAHs) can be observed when micro amounts of six-membered carbocyclic compounds (6-MCCs) are introduced in β-cyclodextrin (β-CD) solution. In order to find the predominating factors of the enhanced phosphorescence observed with this novel approach, 22 typical phosphors of NHCs and PAHs were carefully screened and served as model compounds. The role of the inner heavy atom, the substituent group and the host-guest molecules space-matching on the RTP of different phosphors were investigated. The results demonstrated that the enhancement effects of cyclohexane, bromocyclohexane and cyclohexanol for the RTP of NHCs and PAHs have precedence over traditional halide alkanes such as 1,2-dibromoethane (DBE), exhibiting an obvious sequence as following: cyclohexane > bromocyclohexane > cyclohexanol. This new approach compared with other RTP methods is simple, convenient and fast.     

The stabilization of thermodynamically disfavoured conformers of chlorocyclohexane in the host lattice of tri-ortho-thymotide. Crystallographic and infrared spectroscopic studies

The clathrate compounds of tri-o-thymotide have been prepared with chlorocyclohexane, bromocyclohexane and 2-chlorotetrahydropyran. The cage-type inclusion complex C₃₃H₃₆O₆ · ₂ ¹ C₆H₁₁Cl (trigonal,P3₁21,a=13.604(1),c=30.605(1) Å,Z=6) contains an axial-Cl chair and an axial-Cl boat conformation of the guest, distributed statistically in the ratio 2 1 over the available sites. The observed conformations have been compared with conformers calculated by force field methods. IR spectra are consistent with the crystal structure results for the tri-o-thymotide/chlorocyclohexane clathrate. They further demonstrate the similar preferential inclusion of axial isomers of bromocyclohexane and 2-chlorotetrahydropyran. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82023 (16 pages).Dedicated to Professor H. M. Powell.     

Improving the Thermostability of a Methyl Parathion Hydrolase by Adding the Ionic Bond on Protein Surface

The thermostability of the methyl parathion hydrolase (MPH_OCH) from Ochrobactrum sp. M231 was improved using site-directed mutagenesis. Two prolines (Pro76 and Pro78) located on the protein surface were selected for mutations after inspection of the sequence alignment of MPH_OCH and OPHC2, a thermostable organophosphorus hydrolase from Pseudomonas pseudoalcaligenes C2-1. The temperature of the double-point mutant (P76D/P78K) at which the mutant lost 50% of its activity (T50) was approximately 68 °C, which is higher than that of WT enzyme (64 °C), P76D (67 °C), and P78K (59 °C). Structural analysis of P76D/P78K indicated that the substituted residues (Asp76 and Lys78) could generate an ionic bond and increase the structural electrostatic energy, which could then increase the stability of the protein. These results also suggest that the thermal stability of proteins could be improved by adding the ionic bond on protein surface.     

Isolation of axial conformers of chloro- and bromocyclohexane in a pure state as inclusion complexes with 9,9'-bianthryl, and the discovery of a novel 1,3 diaxial Cl...H weak interaction

The axial conformers of chloro- and bromocyclohexane were isolated in a pure state as inclusion complexes with 9,9'-bianthryl, and a 1,3 diaxial Cl...H weak interaction was discovered by X-ray analysis of the axial conformer of chlorocyclohexane.     

Thermodynamic properties of dimethyl phthalate + vinyl acetate, diethyl phthalate + vinyl acetate or bromocyclohexane, and dibutyl phthalate + vinyl acetate or 1,2-dichlorobenzene at T = 298.15–308.15 K

Thermodynamic properties (densities and viscosities) of binary mixtures of diethyl phthalate (DEP) + bromocyclohexane, dibutyl phthalate (DBP) + 1,2-dichlorobenzene, and vinyl acetate (1) + dimethyl phthalate (DMP) (2), + diethyl phthalate (2), or + dibutyl phthalate (2) were measured over the whole range of mole fractions at atmospheric pressure and different temperatures (T = 298.15 K to 308.15 K). For these mixtures, their excess molar volumes (V ^E) and viscosity deviations (Δη) were calculated from the experimental data. These results were correlated with the Redlich-Kister polynomial equation to derive the coefficients and standard errors.     

甲基丙烯酸二环己基苯甲酯的合成

以溴代环己烷和苯甲酸乙酯为原料,经过两步反应合成了甲基丙烯酸二环己基苯甲酯．探讨了影响反应的各种因素,找到了较好的合成条件．     

Enantioselective Analysis of Amphetamine-Related Designer Drugs in Body Fluids Using Liquid Chromatography and Solid-Phase Derivatization

A method for the enantioselective determination of the amphetamine-derived designer drugs 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA) and 3,4-methylenedioxyethylamphetamine (MDE) based on their derivatization with (-)-1-(9-fluorenyl)ethyl chloroformate (FLEC) is described. The proposed procedure entails preconcentration and derivatization of the analytes into C₁₈-packed solid-phase extraction cartridges, chromatographic separation of the diastereomers originated in a C₁₈ column under gradient elution, and UV detection at 265 nm. Compared with the solution derivatization approach the described procedure increased analyte responses by factors of 28–58. The reliability of the method has been tested by analysing plasma and urine samples spiked with the analytes in the 0.015–1.0 μg mL^?1 concentration interval. The proposed conditions provided adequate linearity, and coefficients of variation ranging from 5% to 14% in plasma, and from 3% to 12% in urine. The recoveries of the analytes were of 78%–126% and 78%–128% in plasma and urine, respectively. The limits of detection (LODs) obtained for all the analytes were 5 ng mL^?1 in both biological matrices.