Utilization of Slovak bentonites in deposition of high-level radioactive waste and spent nuclear fuel

The basic strategic aims in the field of managing high-level radioactive waste and liquidation of nuclear power plants are all contained in the Energy policy of the Slovak Republic. Its aim is to resolve the concept of the backside of the nuclear energetics fuel cycle??long-term deposition of high-level radioactive waste and spent nuclear fuel (SNF). The most important form of high-level radioactive waste and SNF long-term deposition is their deposition in deep geological formations created by natural as well as engineering barriers used to isolate the long-lived radionuclides from the biosphere. The basic components of these barriers are clays, of which bentonite is generally referred to as the most suitable clay material. There are a few significant bentonite deposits in the Slovak Republic: Jel?ový potok, Kopernica, Lastovce, Lieskovec, Dolná Ves. The review article summarizes the information on geotechnical properties of Slovak bentonites published up-to-date, which is inevitable to know for the intention of their use. It highlights the advantages and shows drawbacks of five Slovak deposits. It suggests further research direction, to draw a thorough hydraulical, microbial and radiation profile of Slovak bentonites.     

Comparative study of strontium adsorption on dioctahedral and trioctahedral smectites

Slovak bentonites characterized by good rheological, mineralogical and chemical stability are considered as suitable sealing barriers for construction of Slovak deep geological repository for high-level radioactive waste and spent nuclear fuel. There is several Slovak bentonite deposits, bentonites of which have appropriate adsorption properties meeting the geotechnical requirements for this type of barriers. Study of adsorption properties of bentonites (mainly smectites) is an essential step for developing the migration model long-lived corrosion and activation products, and fission products of uranium. Nuclear wastes contain the most important nuclear fission products, β-emitter ⁹⁰Sr with long half-life, biological half-life and high mobility. The present paper investigates and compares the strontium adsorption properties of bentonites of different mineral composition consisted mainly of dioctahedral and trioctahedral smectites.     

First shrinkage parameters of Slovak bentonites considered for engineered barriers in the deep geological repository of high-level radioactive waste and spent nuclear fuel

The high potential of bentonites to volume changes depending on the water content is considered as their advantage for the engineered barriers in the deep geological repository of high-level radioactive waste and spent nuclear fuel because of swelling and self-healing of cracks in contact with water. On the other hand, drying may lead to opening of cracks and spaces between the bentonite blocks. This would increase the permeability and contamination risk around the hot container with high-level radioactive waste and spent nuclear fuel, especially if the host rock mass is dry. First shrinkage tests on four Slovak bentonites studied for engineered barriers were carried out. The water content at the shrinkage limit and the relative linear shrinkage are the first available shrinkage parameters received for the bentonite paste. The shrinkage hazard is higher in the best bentonites with high swelling potential—from Kopernica and Jel?ový potok. The results indicated the necessity of further shrinkage tests to determine the relative linear and volume shrinkage of bentonite elements pressed of the loose bentonite powder of low water content.     

Adsorption of cesium on domestic bentonites

Bentonite is a natural clay and one of the most promising candidates for use as a buffer material in the geological disposal systems for spent nuclear fuel and high-level nuclear waste. It is intended to isolate metal canisters with highly radioactive waste products from the surrounding rocks because of its ability to retard the movement of radionuclides by adsorption. Slovak Republic avails of many significant deposits of bentonites. Adsorption of Cs on five Slovak bentonites of deposits (Jelšovy potok, Kopernica, Lieskovec, Lastovce and Dolná Ves) has been studied with the use of batch technique. In the case of Dolná Ves deposit, the mixed-layer illite–smectite has been identified as the main clay component. Natural and irradiated samples, in two different kinds of grain size: 45 and 250 μm have been used in the experiments. The adsorptions of Cs on bentonite under various experimental conditions, such as contact time, adsorbent and adsorbate concentrations have been studied. The Cation Exchange Capacity values for particular deposits drop in the following order: Jelšovy potok > Kopernica > Lieskovec > Lastovce > Dolná Ves. Bentonites irradiated samples with 390 kGy have shown higher specific surface and higher values of the adsorption capacity. Distribution coefficients have been determined for bentonite-cesium solution system as a function of contact time and adsorbate and adsorbent concentration. The data have been interpreted in terms of Langmuir isotherm. The uptake of Cs has been rapid and the adsorption of cesium has increased with increasing metal concentrations. The adsorption percentage has decreased with increasing of metal concentrations. Adsorption of Cs has been suppressed by presence of Ca²⁺ more than Na⁺ cation. Sorption experiments carried out show that the most suitable materials intended for use as barriers surrounding a canister of spent nuclear fuel are bentonites of the Jelšovy potok and Kopernica deposits.     

Comparative study of cesium adsorption on dioctahedral and trioctahedral smectites

Bentonites which are characterized by good rheological, mineralogical and chemical stability is considered used as sealing barriers in multibarrier Slovak system of deep geological repository for high-level radioactive waste and spent nuclear fuel. In Slovak Republic there are several significant deposits of bentonite, which are characterized by appropriate adsorption properties and meet the geotechnical requirements for this type of barriers. Study of adsorption properties of bentonites and other smectites is an essential step for developing the migration model long-lived corrosion and activation products, and fission products of uranium. Nuclear wastes contain the most important nuclear fission products, radioisotopes ¹³⁴Cs and ¹³⁷Cs. The present paper investigates and compares the cesium adsorption properties of Slovak and North America bentonites composed mainly of dioctahedral smectite montmorillonite (J, L, SAz-1 and STx-1) and trioctahedral smectites saponite (SapCa-2) and hectorite (SHCa-1).     

Effect of gamma-irradiation on adsorption properties of Slovak bentonites

One of the basic prerequisites for the use of bentonite as engineering barrier in deep geological repositories for radioactive waste and spent nuclear fuel is their stability against ionizing radiation stemming from radionuclides present in radioactive waste and spent nuclear fuel. The aim of this study was to compare the changes in the adsorption properties of selected Slovak bentonites in relation to uranium fission products (¹³⁷Cs and ⁹⁰Sr), prior to and after irradiation of bentonites with a ⁶⁰Co γ-source and specifying the changes in the structure of Slovak bentonites induced by γ-radiation. The changes in irradiated natural forms of Slovak bentonites and the changes in their natrified analogues and fractions with different grain sizes were studied from five Slovak deposits: Jelšovy potok, Kopernica, Lastovce, Lieskovec and Dolná Ves. The EPR spectra of bentonites from deposits Jelšovy potok and Lieskovec with absorbed doses of 10⁴ and 10⁵ Gy γ-rays showed no changes in the structure of the studied Slovak bentonites. The changes, which in terms of structure destabilization can be considered insignificant, occurred only in bentonites with absorbed doses of γ-radiation as much as 1 MGy. The absorbed dose of 1 MGy γ-radiation did not have an effect on the adsorption of cesium on every studied bentonite. Changes that can also be regarded as insignificant occurred only during strontium adsorption, especially on Fe–bentonite from deposit Lieskovec and Ca–Mg–bentonite from deposit Jelšovy potok, when an increase in the adsorption capacity occurred. Attention should be paid in further research of this topic which would require carrying out experiments on bentonite samples with absorbed doses higher by several orders of magnitude.     

Adsorption of cesium and strontium on natrified bentonites

The influence of chemical activation–natrification of bentonites on adsorption of Cs and Sr was studied with regards to utilization of bentonites for depositing high-level radioactive waste and spent nuclear fuel. Bentonite samples from three Slovak deposits in three different grain-size (15, 45 and 250 μm), natural and natrified forms (Na-bentonites); under various experimental conditions, such as contact time, adsorbent and adsorbate concentration have been studied. When comparing the Na-bentonites and their natural analogues, the highest adsorbed Cs and Sr amounts were reached on the natrified samples. After the Sr adsorption a drop in the pH equilibrium value was observed together with the increase of the initial Sr concentration. A disadvantage of the natrified bentonite forms is formation of colloid particles. After 2 h of phase mixing a gentle turbidity was observed as well as formation of a gel-like form. The above findings were confirmed by observing the particle distribution in dry and wet dispersion and centrifugation at two different speeds. Natrification as a technological process of bentonite quality improvement cannot be applied when constructing a long-term repository for high-level radioactive waste and spent nuclear fuel. The main problem of natrification is a technological process which leads to a significant pH increase. Alkaline environment in combination with the K presence and increased temperature in the vicinity of radio-active waste can lead to a rapid illitization of smectite and loss of the original adsorption qualities. Moreover, sodium additions are a significant point of uncertainty since it is not possible to state what amount of Na enters the interlayer space and what amount stays in the inter-partition space.     

Adsorption equilibrium and kinetic studies of strontium on Mg-bentonite, Fe-bentonite and illite/smectite

Radionuclide adsorption on clay rocks has in recent years been studied mainly in connection with their use as sealing barriers in nuclear waste and spent nuclear fuel repositories. In Slovakia we find deposits of bentonites which should be used for the above mentioned purpose. The usability of adsorbents in practical applications depends on the speed of the adsorption process of the adsorbate on the adsorbent surface and distribution ratio. The work objective was the study of the kinetics of Sr adsorption on clay adsorbents with different geological origin. The geological origin of bentonite significantly influences its mineralogical and chemical composition and therein its adsorption properties. The adsorption process of strontium was fast. Adsorption equilibrium was reached for all three samples studied within 1 min from the beginning of the contact between solid and liquid phases. After the adsorption equilibrium was reached there were no more changes in the values of distribution coefficients and the adsorption percentage, and comparable values were reached in the contact-phase time span studied within 10 days. The values of adsorbed strontium were decreasing in the following order: J250 > L250 > DV45. The pseudo second-order kinetic models was used to describe model the kinetic data and provided excellent kinetic data fitting (R ² > 0.999).     

Radiation resistance of pyridine type anion exchange resins for spent fuel treatment

The resistance against radiation of the tertiary pyridine resins synthesized for the treatment of spent nuclear fuels and high level radioactive waste was evaluated. After irradiation at 10 MGy, only approximately 10% or less of the exchange groups were lost in HCl solutions regardless of their concentrations, while 3040% were lost in HNO₃. The pyridine resin has shown remarkable resistance against radiation particularly in HCl solution. It has been revealed that the decomposition of pyridine type resins results from the scission of the principal chains. An irradiation study was conducted also on the quaternary ammonium resins. Quatemization ratio was found to be reduced in HNO₃ solutions at 10 MGy irradiation.     

Sorption of strontium on Slovak bentonites

Sorption of Sr on five Slovak bentonites of deposits has been studied with the use of batch technique. In the experiments there have been used natural, chemically modified and irradiated samples, in three different kinds of grain size. The pH influence on sorption of strontium on bentonites, pH change after sorption and influence of competitive ions have been studied. Distribution ratios have been determined for bentonite–strontium solution system as a function of contact time, pH and sorbate concentration. The data have been interpreted in term of Langmuir isotherm. The uptake of Sr has been rapid and the sorption of strontium has increased by increasing pH. The percentage sorption has decreased with increasing metal concentrations. The pH value after sorption for the natrificated forms of bentonite starts already in the alkaline area and moves to the higher values. For the natural bentonites the values occur in the neutral or in the acidic area. Sorption of Sr has been suppressed by presence of competitive cations as follows: Ba²⁺ > Ca²⁺ > Mg²⁺ > NH₄ ⁺ > K⁺ > Na⁺. By sorption on natrificated samples colloidal particles and pH value increase have been formed. The bentonite exposure as a result of interaction of γ-rays has led to expansion of the specific surface, increasing of the sorption capacity and to the change in the solubility of the clay materials.     

Pyrochemical treatment of spent nitride fuels for MA transmutation

Nitride fuels have several advantages including high thermal conductivity and high metal density(like metallic fuels) and high melting point and isotropic crystal structure(like oxide fuels). Since the late 1990 s, the partitioning and transmutation of minor actinides(MA) has been studied to decrease the long-term radio-toxicity of high-level waste and to mitigate the burden of final disposal. Japan Atomic Energy Agency(JAEA) has proposed a dedicated transmutation cycle using an accelerator-driven system(ADS) with nitride fuels containing MA. The nitride fuel cycle we have developed includes a pyrochemical process. Our focus is on the electrolysis of nitride fuels and their refabrication from the recovered actinides; other processes are similar to the technology for metal fuel treatment and have been studied elsewhere. Here, we summarize our activity on the development of the pyrochemical treatment of spent nitride fuels.     

N,N-Dialkyl amides as extractants for spent fuel reprocessing: an overview

Reprocessing of spent nuclear fuel is vital for the long-term global nuclear power growth and is the major motivation for developing novel separation schemes. Conventionally, PUREX and THOREX processes have been proposed for the reprocessing of U and Th based spent fuels employing tri-n-butyl phosphate (TBP) as extractant. However, based on the experiences gained over last five–six decades on the reprocessing of spent fuels, some major drawbacks of TBP have been identified. Evaluation of alternative extractants is, therefore, desirable which can overcome at least some of these problems. Extensive studies have been carried out on the evaluation of N,N-dialkyl amides as extractants in the back-end of the nuclear fuel cycle for addressing the issues related to the reprocessing of U and Th based spent fuels. Under advanced fuel cycle scenario, efforts are also being made by countries with a developed nuclear technological base to provide safe nuclear power to other countries and to minimize proliferation concerns worldwide. This paper presents an overview of studies carried out in our laboratory on different aspects of reprocessing of U and Th based spent fuels employing N,N-dialkyl amides as extractants.     

Photocatalysis with visible-light-active uranyl complexes

Atomic energy is an important part of current energy resources.Production of nuclear weapons and applications of nuclear fuels in nuclear power plants have accumulated numerous spent fuels containing238U compounds,which are critical nuclear materials.How to reduce the nuclear wastes and to make use of the spent uranium are key scientific issues of environmental and nuclear science.We have reviewed here the physiochemical properties and photocatalytic mechanisms of homogeneous and heterogeneous uranium-containing materials.The current research efforts demonstrate that spent fuels can become promising new photocatalytic materials.     

Development of a data-mining methodology for spent nuclear fuel forensics

The purpose of this study is to categorize the type of spent nuclear fuels using simulation data-based classification methods. Considering the practical conditions making the full analysis of radioactive nuclides difficult, the classification methods were designed to be robust to noise and missing information. The strength and weakness of three classifiers, linear discriminant analysis, quadratic discriminant analysis and support vector classification were compared, which is developed by the history information such as burnup, enrichment, and cooling type generated from ORIGEN-ARP upon fuel assembly types. Auto-Associative Kernel Regression improved outlier management as a pre-processing technique.     

Thermal behavior and immersion heats of selected clays from Turkey

Four clays (two bentonites and two kaolinites) from Turkey were investigated by X-ray diffraction (XRD), thermal analysis (DTA/TG-DSC) and surface area measurement techniques. Mineralogically bentonite samples were characterized low concentration of montmorillonite and high level of impurities. Both kaolinite samples mainly contained kaolinite and quartz as major mineral. TG-DTA curves of all clay samples were measured in the temperature range 30–1200 °C. The total % weight losses for the bentonite samples (B1 and B2) and the kaolinite samples (K1 and K2) were determined as 14.50, 13.42, 5.55 and 11.85%, respectively. Differential Scanning Calorimeter (DSC) analyses of samples were carried out by heating the samples from 30 to 550 °C. The immersion heats of clay samples were measured using with a Calvet-type C-80 calorimeter. The higher exothermic Q_imm values were determined for bentonite samples compared to kaolinite samples.     

New reprocessing system for spent nuclear reactor fuel using fluoride volatility method

Our proposed spent nuclear fuel reprocessing technology named FLUOREX, which is a hybrid system using fluoride volatility and solvent extraction, meets the requirements of the future thermal/fast breeder reactors (coexistence) cycle. We have been done semi-engineering and engineering scale experiments on the fluorination of uranium, purification of UF₆, pyrohydrolysis of fluorination residues, and dissolution of pyrohydrolysis samples in order to examine technical and engineering feasibilities for implementing FLUOREX. We found that uranium in spent fuels can be selectively volatilized by fluorination in the flame type reactor, and the amount of uranium volatilized is adjusted from 90% to 98% by changing the amount of F₂ supplied to the reactor. The volatilized uranium is purified using UO₂F₂ adsorber for plutonium and purification methods such as condensation and chemical traps for fission products provide a decontamination factor of over 10⁷. Most of the fluorination residues that consist of non-volatile fluorides of uranium, plutonium, and fission products are converted to oxides by pyrohydrolysis at 600-800 °C. Although some fluorides of fission products such as alkaline earth metals and lanthanides are not converted completely and fluorine is discharged into the solution, oxides of U and Pu obtained by pyrohydrolysis are dissolved into nitric acid solution because of the low solubility of lanthanide fluorides. These results support our opinion that FLUOREX has great possibilities for being a part of the future spent nuclear fuel cycle system.     

Hydrometallurgical Reprocessing of BREST-OD-300 Mixed Uranium-plutonium Nuclear Fuel

The duration of external fuel cycle of BREST-OD-300 reactor with mixed U-Pu nitride fuel (MNIT) including hydrometallurgical reprocessing should not exceed 3 years. An average burnup of the fuel should be 6% of heavy metal (HM) with the potential increase up to 10% HM. Therefore, the technology should provide the reprocessing of spent nuclear fuel (SNF) after less than 2 years cooling time and with fissile materials (FM) content of 10 – 15%. Pellets technology has been chosen for the MNIT fuel production. That means necessity to receive the recycled actinides oxides of high purification coefficient (∼ 10⁶). Currently on a laboratory scale, the following process stages have been tested on the real products: actinide oxides production and rare-earth and trans-plutonium elements separation. Moreover, on a pilot scale the process of high level radioactive waste (HLW) and intermediate level radioactive waste (ILW) concentration by evaporation has been tested, as well as the Am-Cm separation. In 2015, the design of the MNIT SNF reprocessing facility has been started, placed at the JSC Siberian Chemical Plant site as a part of the pilot demonstration power complex (PDPC) with BREST-OD-300 reactor. MNIT SNF reprocessing plant (RP) should be put in operation after 2020.     

Recovery of neptunium from highly radioactive waste solutions of PUREX origin using CMPO

The partitioning and recovery of²³⁷Np from three types of simulated high level waste solutions originating from PUREX processing of spent nuclear fuels such as sulfate bearing high level waste (SB-HLW), HLW from a pressurised heavy water reactor (PHWR-HLW) and from a fast breeder reactor (FBR-HLW) have been carried out using a mixture of 0.2M CMPO and 1.2M TBP in dodecane. Quantitative extraction of neptunium was possible by either oxidizing it to the hexavalent state keeping K₂Cr₂O₇ at 0.01M concentration or by reducing it to tetravalent state keeping Fe²⁺ at 0.02M concentration. Stripping of neptunium was carried out using different reagents, such as dilute nitric acid, oxalic acid and sodium carbonate. Almost quantitative recovery of neptunium has been achieved during these studies.     

Long-term Environmental Assessment of Waste from PyroGreen System

We have conducted a long-term environmental assessment of a geological repository for Intermediate Level Wastes (ILW) arising from PyroGreen processes that has been developed to decontaminate all HLW from the pyrochemical partitioning of spent nuclear fuels (SNF). PyroGreen process has been designed so that final ILW can meet conservative acceptance criteria such as one established for the Waste Isolation Pilot Plant (WIPP) in U.S.A. The nuclide inventory of final vitrified PyroGreen waste is calculated using ORIGEN 2.1 based on the design decontamination factor of PyroGreen processes applied to 18,171 metric tons of PWR SNF with 45 GWD/MTU burnup. Using GoldSim model, the environmental impact of ILW upon geological disposal at an intermediate depth. Among radioactive nuclides, Ra226, Rn222 and Sn126 are identified as key contributors to radiological dose for general public. The environmental impact of PyroGreen wastes satisfies the Korean dose limit of 0.1 mSv/year with sufficiently high margin. Sensitivity studies have shown that the predicted dose can vary significantly by distribution coefficient of Ra226 and Rn222, solubility limit of Se79.     

Impact of operational changes on the scaling factors of radioactive wastes from the IEA-R1 research reactor

Nowadays, the scaling factor methodology is widely used in order to estimate the activity concentration of difficult to measure nuclides in low- and intermediate-level waste from nuclear reactors. However, very few experimental studies evaluate how operational changes in the reactors affect scaling factors. The present work examines the impact of operational changes on the scaling factors that were determined for spent ion-exchange resins and spent activated charcoal permanently withdrawn as radioactive wastes from the water cleanup system of the IEA-R1 nuclear research reactor.