便携式亚铁离子光化学传感器的研究

研究了一种以吸附树脂为基质的便携式光化学传感器。以４,７－二苯基－１,１０－二氮杂菲为敏感试剂,用于水中亚铁离子含量的检测。此传感器结构简单,可用１２Ｖ电池提供能量,响应时间短（〈１０ｍｉｎ）,质量浓度的检测范围为０．０５～３．００ｍｇ／Ｌ,检出限为０．０１ｍｇ／Ｌ,选择性好,适用于野外水质监测。     

卤素离子化学传感器研究进展

卤素离子在化学、生物学以及材料学等方面都具有十分重要的作用.在生物体中,氟化物浓度的大小对生物体健康有着重要的影响;卤素化合物经常作为一种阻燃剂被添加到塑料等聚合物产品中,用以提高燃点.因此对于卤素离子的检测具有特别重要的意义.光化学传感器通常是指比色和荧光传感器,它具有选择性好以及灵敏度高等优点.近年来,一些基于卤素离子的化学传感器被广泛地报道.根据主客体分子的类型,卤素离子化学传感器主要包括氟离子化学传感器、碘离子化学传感器、双通道卤素离子化学传感器以及功能化卤素离子化学传感器.综述了近年来不同类型的卤素离子化学传感器的研究进展,总结了该类传感器的合成策略,对未来卤素离子化学传感器的研究方向进行了展望.     

铜离子作为主客体的双通道化学传感器的研究进展

铜离子在人体各种生理过程中起着重要的作用,生物体中铜离子浓度的失衡会引起一些相应的疾病,因此对于铜离子的研究至关重要.所谓双通道化学传感器,是指可以选择性识别两种离子或者分子的一类化学传感器,相比于单通道化学传感器,该类传感器具有功能多样化的特点.近年来,一些关于铜离子作为主客体的双通道化学传感器被广泛报道.基于此,综述了近年来铜离子作为主客体的双通道化学传感器的研究进展.     

基于石墨烯修饰碳电极的铜离子印迹电化学传感器的制备与应用

以铜离子为模板,多巴胺为功能单体,采用电聚合法在石墨烯修饰碳电极表面成功制备对铜离子有高选择性和灵敏性的印迹电化学传感器。采用差分脉冲伏安法和循环伏安法对该印迹传感器的电化学行为进行详细研究。在优化检测条件下,该印迹电化学传感器的响应电流与铜离子浓度的负对数在5.0×10~(-6)~5.0×10~(-11)mol/L浓度范围内呈良好的线性关系,最低检测限为1.0×10~(-11)mol/L。该印迹电化学传感器成功用于实际水样中的微量铜离子分析。     

POAP－Ni~（2＋）电极在乙醇传感器中的应用

ＰＯＡＰ－Ｎｉ２＋膜电极对乙醇氧化表现出优越的电催化活性．乙醇氧化电流受到膜厚、膜中镍离子浓度、活化时间、电解质ｐＨ值及温度等条件的影响．选择合适的条件,可得到乙醇浓度与响应电流的线性关系．ＰＯＡＰ－Ｎｉ２＋可构成较理想的乙醇传感器,其线性范围、检测下限、响应时间及抗干扰能力等主要特征参数均达到实用要求     

基于石墨烯修饰的铜离子印迹电化学传感器研制与应用

以铜离子为模板离子,多巴胺为功能单体,采用电聚合法在石墨烯修饰碳电极表面成功制备对铜离子有高选择性和高灵敏性的印迹电化学传感器。采用差分脉冲伏安法和循环伏安法对该印迹传感器的电化学行为进行详细研究。优化检测条件,该印迹电化学传感器的响应电流与铜离子浓度的负对数在5×10_-6~5×10_-11 mol/L的浓度范围内呈良好的线性关系,最低检测限为1.0 × 10_-11mol/L。该印迹电化学传感器成功用于实际水样中的微量铜离子分析。     

基于室温离子液体的电导型气体传感器

本文利用室温离子液体对水或有机蒸气吸收后其离子导电性的改变,研制了以离子液体BmimPF6为敏感材料的电导型气体传感器.考查了BmimPF6用量对传感器响应的影响,测定了传感器对不同浓度的水蒸汽及乙醇、二氯甲烷等饱和有机蒸气的响应.实验结果显示,该传感器具有制作方便、结构简单、稳定性高及线性范围宽等优点,可被用于不同浓度的水或有机蒸气/氮气混合气氛中,水蒸汽或有机蒸气浓度的测定.此外,还针对该传感器对乙醇等不同饱和有机蒸气响应信号与这些有机溶剂的理化性质参数间的定量关系,采用化学计量学方法进行了建模分析.     

尖晶石对β／β″—Al2O3膜相组成和离子导电性的影响

以wag／P”－AI。O。为固体电解质的CO。、SO。、NO。等气体传感器的研究已有很多报道［‘－‘］，多采用的是个AI。O。结构的电解质。AI刀。和p”－AI刃。的结构具有一定的相似性，但后者具有更高的迁移离子浓度和更开放的晶体结构，表现出更好的离子导电性‘’‘．由于卢”－AI。O。为介稳结构，需要加入如Li。O、MgO等作为稳定剂才能稳定存在．以Li对稳定的产”－al。O。烧结较容易，P”－AI。O。相转化率高，但以MsO为稳定剂制备的”－AI刃。其显微结构和抗吸湿性能更为优越．LJLi对和MgO共同稳定的产”－AI。O。可以…     

动力学—压电石英晶体传感器测定水中微量汞的研究

基于涂银压电石英晶体对ＣＮ＾－离子的灵敏响应，应用汞对六氰合铁酸钾与邻二氮杂菲反应的动力学催化作用，建立了动力学－ＰＱＣ传感器单面触液测定微量汞的新方法。研究了ＰＱＣ传感器对汞的响应机理，响应曲线，实验条件及共存离子干扰情况。     

单柱离子排斥-阳离子交换色谱法测定酸雨组分

采用单柱离子色谱系统和电导检测的方法,首次以ＤＬ－苹果酸－甲醇水溶液为淋洗液,简便、有效地同时分离、检测了溶液ＳＯ＾－２４、Ｃｌ＾－、ＮＯ＾－３、Ｆ＾－、Ｎａ＾＋、ＮＨ＾＋４、Ｋ＾＋、Ｍｇ＾２＋、Ｃａ＾２＋９种离子。研究了ＤＬ－苹果酸浓度、甲醇浓度、流速和温度对各离子保留时间的影响。方法用于上海部分地区降水中的阴、阳离子分析,并与其它方法对比,结果良好。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.