Flexible X‐ray detector based on sliced lead iodide crystal

A promising flexible X‐ray detector based on inorganic semiconductor PbI₂ crystal is reported. The sliced crystals mechanically cleaved from an as‐grown PbI₂ crystal act as the absorber directly converting the impinging X‐ray photons to electron hole pairs. Due to the ductile feature of the PbI₂ crystal, the detector can be operated under a highly curved state with the strain on the top surface up to 1.03% and still maintaining effective detection performance. The stable photocurrent and fast response were obtained with the detector repeated bending to a strain of 1.03% for 100 cycles. This work presents an approach for developing efficient and cost‐effective PbI₂‐based flexible X‐ray detector.

     

Nanosphere lithography with variable deposition angle for the production of one‐directional transparent conductors

The production of high quality and cheap transparent electrodes is a fundamental step for a variety of optoelectronic devices. We present a method for the production of transparent conducting films optimised for electrical conduction in one direction. The deposition of a metal film through a perfectly aligned nanosphere‐lithography mask at variable incidence angle gave origin to parallel nanowires with thin interconnections. This structure showed excellent conductivity in one direction and high optical transparency.

Glass substrates under the crystalline areas of the polystyrene‐nanospheres mask.     

Al‐density variation as one driving force for void formation in PERC solar cells

The reduction of void formation in local Al contact structures is of high interest in studies dealing with passivated emitter and rear contact (PERC) solar cells. So far, several processing parameters and their impact on local contact formation were investigated in detail. However, up to now density variation of Al in dependence on temperature and Si content in the melt were not taken into account as a principal reason for void formation. In this context the current assumption of a constant volume of the Al paste particles is discussed in more detail. Based on the results of energy dispersive X‐ray spectroscopy, void formation implies either an expansion of paste particles or their burst during contact formation.

     

Investigation of strain‐induced phase transformation in ferroelectric transistor using metal‐nitride gate electrode

In this work, we report a ferroelectric memory with strained‐gate engineering. The memory window of the high strain case was improved by ～71% at the same ferroelectric thickness. The orthorhombic phase transition (from ferroelectric to anti‐ferroelectric transition) plays a key role in realizing negative capacitance effect at high gate electric field. Based on a reliable first principles calculation, we clarify that the gate strain accelerates the phase transformation from metastable monoclinic to orthorhombic and thus largely enhances the ferroelectric polarization without increasing dielectric thickness. This ferroelectric strain technology shows the potential for emerging device application.

     

High‐temperature ferroelectricity and strong magnetoelectric effects in a hybrid organic–inorganic perovskite framework

A Cu‐based organic–inorganic perovskite framework exhibits high‐temperature ferroelectricity with strong magnetoelectric effects. Both electric field control of magnetization and magnetic field control of polarization are realized. Theoretical calculations suggest that a new mechanism of hybrid improper ferroelectricity arising from the Jahn–Teller distortions of magnetic metal ions and tilting of the organic cations are responsible for the peculiar multiferroic behaviors.

     

A high efficiency 3D photovoltaic microwire with carbon nanotubes (CNT)‐quantum dot (QD) hybrid interface

An innovative hybrid QD sensitized photovoltaic carbon nanotubes microyarn has been developed using thermally‐stable and highly conductive carbon nanotubes yarns (CNYs). These CNYs are highly inter‐aligned, ultrastrong and flexible with excellent electrical conductivity, mechanical integrity and catalytic properties. The CNYs are coated with a QD‐incorporated TiO₂ microfilm and intertwined with a second set of CNYs as a counter electrode (CE). The maximum photon to current conversion efficiency (η_AM1.5) achieved with prolonged‐time stability was 5.93%. These cells are capable of efficiently harvesting incident photons regardless of direction and generating photocurrents with high efficiency and operational stability.

     

Localization of π‐electron density in twisted bilayer graphene

In bilayer graphene, mutual rotation of layers has strong effect on the electronic structure. We theoretically study the distribution of electron density in twisted bilayer graphene with the rotation angle of 21.8° and find that regions with AA‐like and AB‐like stacking patterns separately contribute to the interlayer low‐energy van Hove singularities. In order to investigate the peculiarities of interlayer coupling, the charge density map between the layers is examined. The presented results reveal localization of π‐electrons between carbon atoms belonging to different graphene layers when they have AA‐like stacking environment, while the interlayer coupling is stronger within AB‐stacked regions.

Charge density map for bilayer graphene with a layer twist of 21.8° (interlayer region).     

True nature of active layers in organic solar cells fabricated by sequential casting of donor and acceptor layers

The operation characteristics of nominal bilayer (BL) organic solar cells (OSCs), the active layers (ALs) of which consisted of sequentially casted bottom P3HT donor and top ICBA acceptor layers, resembled those of OSCs with bulk heterojunction (BHJ) ALs. Optical analysis and device simulations showed that such resemblance can be attributed to a similarity in the micromorphology of ALs; as‐deposited BL‐type ALs transformed spontaneously into BHJ‐type ALs. The inclusion of P3HT nanowires (NWs) in the donor layers resulted in different AL micromorphology and consequently a larger power conversion efficiency. Separate assessment of the exciton generation and charge–carrier transport and/or extraction showed that the contribution of P3HT NWs was more prominent in optical effects.

     

Ab initio prediction of a new allotrope of two‐dimensional silicon

Silicene, a promising candidate for future electronic devices, has been fabricated only on supporting substrates as silicon atom prefers to form the sp³ hybridization structure. Therefore, it's important to search more stable two‐dimensional (2D) silicon allotropes and several 2D silicon allotropes have been proposed recently. In this work, we predict a new type of 2D silicon allotrope (called OTDS) based on ab initio structure, phonon‐mode and molecular dynamics calculations. OTDS has the in‐plane octagonal tiling (OT) pattern with dumbbell‐like structures and silicon atoms in OTDS are four‐ and three‐coordinated. OTDS is a semiconductor with a large band gap (about 1.5 eV by HSE calculation) and the band gap can be tuned effectively by the in‐plane strain.

Perspective and side views of the atomic structure of OTDS.     

Delayed phase separation in growth of organic semiconductor blends with limited intermixing

Binary mixed thin films of picene (C₂₂H₁₄, PIC) and pentacene (C₂₂H₁₄, PEN) consist of crystallites with a statistical occupation of the lattice sites by either PEN or PIC and unit cell parameters continuously changing with the mixing ratio. For high PIC ratios a PIC phase forms which corresponds to a limited intermixing of the two compounds. The growth behavior of these mixtures is investigated in situ and in real‐time using grazing incidence X‐ray diffraction. We observe a delayed phase separation in PIC‐rich blends, i.e. complete intermixing in the monolayer range and the nucleation of a pure PIC‐phase in addition to the intermixed phase starting from the second monolayer.

Growth scenario of picene‐rich pentacene‐picene blends.     

Impact of strain induced by polymer curing in benzocyclobutene embedded semiconductor nanostructures

Polymers such as benzocyclobutene are commonly used as embedding materials for semiconductor nanostructures. During the curing process of the polymer up to 250 °C, a significant impact of strain can be induced on the embedded semiconductor material due to different thermal expansion coefficients. This strain has been revealed by X‐ray diffraction in free‐standing GaAs nanowires grown on a silicon substrate, embedded in a polymer matrix. It will be shown that this strain is released during the X‐ray irradiation if additionally an external static electric field is applied.

     

Numerical modeling of photovoltaic efficiency of n‐type GaN nanowires on p‐type Si heterojunction

In this Letter, we investigate the photovoltaic properties of heterojunction solar cells based on n‐GaN nanowire (NW)/ p‐Si substrate heterostructures by means of numerical modeling. Antireflection properties of the NW array on the top of Si substrate were studied theoretically to show an order of magnitude enhancement in antireflection properties in comparison to the pure Si surface (2.5% vs. 33.8%). In order to determine the optimal morphology and doping levels of the structure with maximum possible efficiency we simulated its properties. The carried out simulation showed that the maximum efficiency should be more than 20% under AM1.5D illumination. The proposed design opens new perspectives and opportunities in the field of heterojunction tandem solar cell researches.

     

On the assessment of CIGS surface passivation by photoluminescence

An optimized test structure to study rear surface passivation in Cu(In,Ga)Se₂ (CIGS) solar cells by means of photoluminescence (PL) is developed and tested. The structure – illustrated in the abstract figure – is examined from the rear side. To enable such rear PL assessment, a semi‐transparent ultra‐thin Mo layer has been developed and integrated in place of the normal rear contact. The main advantages of this approach are (i) a simplified representation of a rear surface passivated CIGS solar cell is possible, (ii) it is possible to assess PL responses originating close to the probed rear surface, and (iii) a stable PL response as a function of air exposure time is obtained. In this work, PL measurements of such structures with and without rear surface passivation layers have been compared, and the measured improvement in PL intensity for the passivated structures is associated with enhanced CIGS rear interface properties.

     

Localized states emission in type‐I GaAsSb/AlGaAs multiple quantum wells grown by molecular beam epitaxy

As an important candidate for novel infrared semiconductor lasers, the optical properties of GaAsSb‐based multiple quantum wells (MQWs) are crucial. The temperature‐ and excitation power‐dependent photoluminescence (PL) spectra of the GaAs_0.92Sb_0.08/Al_0.2Ga_0.8As MQWs, which were grown by molecular beam epitaxy, were investigated and are detailed in this work. Two competitive peaks were observed from 40 K to 90 K. The peak located at the low‐energy shoulder was confirmed to be localized states emission (LE) and the high‐energy side peak was confirmed to be free‐carrier emission by its temperature‐dependent emission peak position. It is observed that the LE peak exhibited a blueshift with the increase of laser excitation power, which can be ascribed to the band filling effect of localized states. Our studies have great significance for application of GaAsSb‐based MQWs in infrared semiconductor lasers.

     

Sulfur impregnation of multi‐walled carbon nanotubes via SF6/NH3 plasma exposure

Plasma treatments are established methods to functionalise carbon nanotubes (CNTs) and modify their surface structure. This paper presents a mild glow‐discharge plasma treatment of aligned arrays of multi‐walled carbon nanotubes employing sulfur hexafluoride (SF₆), ammonia (NH₃), and their mixtures as process gases. For the latter, sulfur was detected at the tip and sidewalls of the nanotubes via energy‐dispersive X‐ray spectroscopy, while electron microscopy served as method to verify the structural integrity of the CNTs after the plasma treatment. This approach provides the basis for an easy and quick alternative to existing sulfur functionalisation methods of MWCNTs. Furthermore, the proposed method can conveniently be applied to carbon nanotube arrays on substrate while preserving their structure and alignment.

SEM‐EDX map of SF₆/NH₃ plasma‐treated multi‐walled carbon nanotubes on substrate. Green, yellow and red correspond to silicon, carbon and sulfur signals, respectively.     

Hole‐extraction layer dependence of defect formation and operation of planar CH3NH3PbI3 perovskite solar cells

Three planar CH₃NH₃PbI₃ (MAPbI₃) solar cells having the same structure except a hole‐extraction layer (HEL) showed distinctive difference in operation characteristics. Analysis of frequency‐dependent capacitance and dielectric‐loss spectra of the three MAPbI₃ devices showed two types of recombination‐loss channels with different time constants that we attributed respectively to interface and bulk defects. Discrepancy in defect formation among the three devices with a HEL of PEDOT:PSS, NiO_x, or Cu‐doped NiO_x was not surprising because grain‐size distribution and crystalline quality of MAPbI₃ can be affected by surface energy and morphology of underlying HELs. We were able to quantify interface and bulk defects in these MAPbI₃solar cells based on systematic and simultaneous simulations of capacitance and dielectric‐loss spectra, and current–voltage characteristics by using the device simulator SCAPS.

     

Graphene screen‐printed radio‐frequency identification devices on flexible substrates

Despite the great promise of printed flexible electronics from 2D crystals, and especially graphene, few scalable applications have been reported so far that can be termed roll‐to‐roll compatible. Here we combine screen printed graphene with photonic annealing to realize radio‐frequency identification devices with a reading range of up to 4 meters. Most notably our approach leads to fatigue resistant devices showing less than 1% deterioration of electrical properties after 1000 bending cycles. The bending fatigue resistance demonstrated on a variety of technologically relevant plastic and paper substrates renders the material highly suitable for various printable wearable devices, where repeatable dynamic bending stress is expected during usage. All applied printing and post‐processing methods are compatible with roll‐to‐roll manufacturing and temperature sensitive flexible substrates providing a platform for the scalable manufacturing of mechanically stable and environmentally friendly graphene printed electronics.

     

Thermally‐activated post‐growth dewetting of fullerene C60 on mica

Understanding and controlling the growth and stability of molecular thin films on solid surfaces is necessary to develop nanomaterials with well‐defined physical properties. As a prominent model system in organic electronics, we investigate the post‐growth dewetting kinetics of the fullerene C₆₀ on mica with real‐time and in situ X‐ray scattering. After layer‐by‐layer growth of C₆₀, we find a thermally‐activated post‐growth dewetting, where the smooth C₆₀‐layer breaks up into islands. This clearly shows that growth is kinetically limited before the system moves over an activation barrier into an energetically favored configuration. From the temperature‐dependent dewetting kinetics we find an effective activation barrier of 0.33 eV, which describes both the temperature‐dependent macroscopic changes in the surface morphology and the microscopic processes of inter‐ and intralayer diffusion during dewetting.