Na‐site energy of P2‐type NaxM O2 (M = Mn and Co)

P2‐type Na_xM O₂ (M = Mn and Co) is a promising cathode material for low‐cost sodium ion secondary batteries. In this structure, there are two different crystallographic Nai (i = 1 and 2) sites with different Coulomb potential $ (\varphi _i)$ provided by M^4–x and O^2–. Here, we experimentally determine a difference ${(\rm \Delta }\varepsilon \equiv \varepsilon _1 - \varepsilon _2)$ of Na‐site energies ${(}\varepsilon _i \equiv e\varphi {\kern 1pt} _i)$ based on the temperature dependence of the site occupancies. We find that ${\rm \Delta }\varepsilon \;{=}\;56\;{K}$ for Na_0.52MnO₂ is significantly smaller than 190 K for Na_0.59CoO₂. We interpret the suppressed ${\rm \Delta }\varepsilon $ in Na_0.52MnO₂ in terms of the screening effect of the Na⁺ charge. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Carbon‐Encapsulated Tube‐Wire Co3O4/MnO2 Heterostructure Nanofibers as Anode Material for Sodium‐Ion Batteries

This study presents a general approach for the synthesis of carbon‐encapsulated wire‐in‐tube Co₃O₄/MnO₂ heterostructure nanofibers (Co₃O₄/MnO₂@C) via electrospinning followed by calcination. The as‐synthesized Co₃O₄/MnO₂@C is investigated as the sodium‐ion batteries anode material, which not only exhibits a high reversible capacity of 306 mAh g⁻¹ at 100 mA g⁻¹ over 200 cycles, but also shows a cycling stability of 126 mAh g⁻¹ after 1000 cycles at a high current density of 800 mA g⁻¹. The excellent electrochemical performance can be ascribed to the contribution from carbon‐encapsulated outer‐tube Co₃O₄ and inner‐wire MnO₂ heterostructures, which offer a large internal space and good electrical conductivity. The present work can be helpful in providing new insights into heterostructures for sodium‐ion batteries and other applications.     

Facile Fabrication of Bicomponent CoO/CoFe2O4‐N‐Doped Graphene Hybrids with Ultrahigh Lithium Storage Capacity

A facile strategy is developed to fabricate bicomponent CoO/CoFe₂O₄‐N‐doped graphene hybrids (CoO/CoFe₂O₄‐NG). These hybrids are demonstrated to be potential high‐performance anodes for lithium‐ion batteries (LIBs). The CoO/CoFe₂O₄ nanoplatelets are finely dispersed on the surface of N‐doped graphene nanosheets (CoO/CoFe₂O₄‐NG). The CoO/CoFe₂O₄‐NG electrode exhibits ultrahigh specific capacity with 1172 mA h g^?1 at 500 mA g^?1 and 970 mA h g^?1 at 1000 mA g^?1 as well as excellent cycle stability due to the synergetic effects of N‐doped graphene and CoO/CoFe₂O₄ nanoplatelets. The well‐dispersed bicomponent CoO/CoFe₂O₄ is responsible for the high specific capacity. The N‐doped graphene with high specific surface area has dual roles: to provide active sites for dispersing the CoO/CoFe₂O₄ species and to function as an electrical conducting matrix for fast charge transfer. This method provides a simple and efficient way to configure the hybridized electrode materials with high lithium storage capacity.     

Strong visible‐light photovoltaic effect in multiferroic Pb(Fe1/2V1/2)O3 bulk ceramics

The multiferroic Pb(Fe_1/2V_1/2)O₃ (PFV) bulk ceramic was fabricated by a conventional ceramic sintering method. The strong visible‐light photovoltaic effect in Sn‐doped‐In₂O₃(ITO)/PFV/ITO structure capacitor was observed. The open‐circuit voltage was up to ～0.7 V, which was much higher than the value (～0.3 V) in BiFeO₃ film. The photo‐excited electric current is almost proportional to the incident light illumination intensity. The good visible‐light photovoltaic makes PFV ceramic a potential candidate for practical application in solar cell devices.

     

Co3O4 Hollow Nanoparticles and Co Organic Complexes Highly Dispersed on N‐Doped Graphene: An Efficient Cathode Catalyst for Li‐O2 Batteries

Rechargeable Li‐O₂ batteries are promising candidates for electric vehicles due to their high energy density. However, the current development of Li‐O₂ batteries demands highly efficient air cathode catalysts for high capacity, good rate capability, and long cycle life. In this work, a hydrothermal‐calcination method is presented to prepare a composite of Co₃O₄ hollow nanoparticles and Co organic complexes highly dispersed on N‐doped graphene (Co–NG), which acts as a bifunctional air cathode catalyst to optimize the electrochemical performances of Li‐O₂ batteries. Co–NG exhibits an outstanding initial discharge capacity up to 19 133 mAh g^?1 at a current density of 200 mA g^?1. In addition, the batteries could sustain 71 cycles at a cutoff capacity of 1000 mAh g^?1 with low overpotentials at the current density of 200 mA g^?1. Co–NG composites are attractive as air cathode catalysts for rechargeable Li‐O₂ batteries.     

Surface‐enhanced Raman scattering of 4‐mercaptopyridine on sub‐monolayers of α‐Fe2O3 nanocrystals (sphere,spindle, cube)

We report surface‐enhanced Raman scattering (SERS) spectra from 4‐mercaptopyridine (4‐Mpy) adsorbed on sub‐monolayers of α‐Fe₂O₃ nanocrystals (sphere, spindle, cube). The maximum enhancement factor has been estimated to be about 10⁴ compared to that of 4‐Mpy in solution. A possible mechanism has been proposed that the charge transfer between the α‐Fe₂O₃ nanocrystals and the 4‐Mpy molecules is most likely responsible for the observed enhancement of Raman intensity of adsorbed 4‐Mpy molecules as surface plasmon resonances have not occurred. Copyright © 2009 John Wiley & Sons, Ltd.     

TiO2 coating of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries

TiO₂-coated LiNi_1/3Co_1/3Mn_1/3O₂ materials were prepared by the hydrolyzation of Ti(OBu)₄. The impact of TiO₂ coating on the structure and electrochemical properties of LiNi_1/3Co_1/3Mn_1/3O₂ was investigated using X-ray diffraction, scanning electron microscope, and charge–discharge tests. The results indicated that TiO₂ coating did not affect the lattice of LiNi_1/3Co_1/3Mn_1/3O₂, but exhibited obvious effects on its discharge capacity and cycling stability. As coated TiO₂ increased from 0.0 to 2.0 mol%, the initial capacity of samples decreased slightly, but the cycling stability over 2.5∼4.3 V increased remarkably. The capacity retention reached 99.5% at the 50th cycle at a coating amount of 2.0 mol%.     

A High‐Performance Anode Material for Li‐Ion Batteries Based on a Vertically Aligned CNTs/NiCo2O4 Core/Shell Structure

3D vertically aligned carbon nanotubes (CNTs)/NiCo₂O₄ core/shell structures are successfully synthesized as binder‐free anode materials for Li‐ion batteries (LIBs) via a facile electrochemical deposition method followed by subsequent annealing in air. The vertically aligned CNTs/NiCo₂O₄ core/shell structures are used as binder‐free anode materials for LIBs and exhibit high and stable reversible capacity (1147.6 mAhg^?1 at 100 mAg^?1), excellent rate capability (712.9 mAh g^?1 at 1000 mAg^?1), and good cycle stability (no capacity fading over 200 cycles). The improved performance of these LIBs is attributed to the unique 3D vertically aligned CNTs/NiCo₂O₄ core/shell structures, which support high electron conductivity, fast ion/electron transport in the electrode and at the electrolyte/electrode interface, and accommodate the volume change during cycling. Furthermore, the synthetic strategy presented can be easily extended to fabricate other metal oxides with a controlled core/shell structure, which may be a promising electrode material for high‐performance LIBs.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

ZrO2 coating of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries

ZrO₂-coated LiNi_1/3Co_1/3Mn_1/3O₂ materials were prepared by hydroxide precipitation. The structure and electrochemical properties of the ZrO₂-coated LiNi_1/3Co_1/3Mn_1/3O₂ were investigated using X-ray diffraction, scanning electron microscope, and charge–discharge tests, indicating that the lattice structure of LiNi_1/3Co_1/3Mn_1/3O₂ were unchanged after the coating but the cycling stability was improved. As the coating amount increased from 0.0 to 0.5 mol.%, the initial capacity of the coated LiNi_1/3Co_1/3Mn_1/3O₂ decreased slightly; however, the cycling stability increased remarkably over the cut-off voltages of 2.5~4.3 V and the capacity retention reached 99.5% after 30 cycles at the coating amount of 0.5 mol.%. ZrO₂ coating also improved the cycling stability of LiNi_1/3Co_1/3Mn_1/3O₂ over wider cut-off voltage of 2.5~4.6 V.     

CuO/Al2O3、CuO/CeO2-Al2O3和CuO/La2O3-Al2O3催化剂中CuO物种被CO氧化的比较

用浸渍法制备了CuO/Al2O3 (Cu/Al)、CuO/CeO2- Al2O3 (Cu/CeAl)和CuO/La2O3-Al2O3(Cu/LaAl)催化剂. 通过原位XRD、Raman和H2-TPR方法， 对催化剂中的CuO物种以及CuO-Al2O3的固-固相反应进行了表征. 结果表明，对于Cu/Al催化剂，CuAl2O4存在于CuO与Al2O3层之间，CuO以高分散和晶相两种相态存在于催化剂的表层；对于Cu/CeAl催化剂，除了少量高分散和晶相的CuO存在于表层外，大部分CuO迁移到了CeO2的内层，     

Template‐Free Fabrication of Mesoporous Hollow ZnMn2O4 Sub‐microspheres with Enhanced Lithium Storage Capability towards High‐Performance Li‐Ion Batteries

In this work, we rationally designed an efficient template‐free synthetic strategy to fabricate hierarchical mesoporous hollow ZnMn₂O₄ sub‐microspheres (HZSMs) constructed entirely from nanoparticle (NP) building blocks of size ≈15 nm. The well‐known inside‐out Ostwald ripening process was tentatively proposed to shed light on the formation mechanism of the mesoporous hollow nano‐/microarchitecture. In favor of the intrinsic structural advantages, these resulting HZSMs exhibited superior electrochemical lithium‐storage performance with high specific capacity, excellent cyclability, and good rate capability when evaluated as an anode material for advanced Li‐ion batteries (LIBs). The excellent electrochemical performance should be reasonably ascribed to the porous and hollow structure of the unique HZSMs with nanoscale subunits, which reduced the diffusion length for Li⁺ ions, improved the kinetic process and enhanced the structural integrity with sufficient void space for tolerating the volume variation during the Li⁺ insertion/extraction. These results further revealed that the as‐prepared mesoporous HZSMs would be a promising anode for high‐performance LIBs.     

Bulk superconductivity in single‐phase Bi3O2S3

We report the synthesis of single‐phase Bi₃O₂S₃ sample and confirm the occurrence of bulk superconductivity with transition temperature at 5.8 K. The Bi₃O₂S₃ superconductor is categorized as typical type‐II superconductor based on the results of both temperature and magnetic field dependences of magnetization. Hall coefficient measurements give evidence of a multiband character, with a dominant conduction mainly by electron‐like charge carriers. The charge carrier density is about 1.45 × 10¹⁹ cm^–3, suggesting that the system has very low charge carrier density.

     

Synthesis of spherical LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries

Spherical LiNi_1/3Co_1/3Mn_1/3O₂ was successfully prepared by controlled crystallization. The preparation started with the spherical coprecipitate of Ni_1/3Co_1/3Mn_1/3CO₃ from NiSO₄, CoSO₄, MnSO₄, NH₄HCO₃, and NH₃·H₂O, followed by pyrolysis of Ni_1/3Co_1/3Mn_1/3CO₃ at 600°C for 3 h. The X-ray diffraction analysis showed that the homogeneous cubic (Ni_1/3Co_1/3Mn_1/3)₃O₄ was obtained after the pyrolysis. Spherical LiNi_1/3Co_1/3Mn_1/3O₂ was obtained by sintering of the mixture of as-obtained (Ni_1/3Co_1/3Mn_1/3)₃O₄ and LiOH·H₂O at 900°C for 6 h in air. As-prepared spherical LiNi_1/3Co_1/3Mn_1/3O₂ presented initial discharge capacity of 162.9 mA h g⁻¹ and capacity retention of 98% at 50th cycle.     

Pb(Sc_(1/2)Nb_(1/2))O_3中有序-无序转变和铁电相变的Raman光谱研究

采用wolframite前驱物法制备了Pb(Sc1/2Nb1/2)O3陶瓷。通过调节陶瓷烧结工艺,获得了三种具有不同B位离子有序度的PSN陶瓷。测量了三种陶瓷样品在室温至160°C范围内的Raman光谱随温度变化。结果表明,随着温度的升高,三种不同B位有序度的陶瓷样品中,Raman光谱中位于530 cm-1的F2g模的峰位和半峰宽分别在100°C,85°C和80°C发生了突变,表明陶瓷分别在100°C,85°C和80°C三个温度点发生了铁电-顺电相变。上述结论得到了介电温度谱测量数据的支持。     

Hierarchically Porous NaCoPO4–Co3O4 Hollow Microspheres for Flexible Asymmetric Solid‐State Supercapacitors

A template‐free hydrothermal method is developed to prepare hierarchical hollow precursors. An inside‐out Ostwald ripening mechanism is proposed to explain the formation of the hollow structure. After the calcination in the air, hierarchically meso/macroporous NaCoPO₄–Co₃O₄ hollow microspheres can easily be obtained. When being evaluated as electrode materials for a supercapacitor, the hierarchically porous NaCoPO₄–Co₃O₄ hollow microspheres electrode shows a specific capacitance of 268 F g^?1 at 0.8 A g^?1 and offers a good cycle life. More importantly, the obtained materials are successfully applied to fabricate flexible solid‐state asymmetric supercapacitors. The device exhibits a specific capacitance of 28.6 mF cm^?2 at 0.1 mA cm^?2, a good cycling stability with only 5.5% loss of capacitance after 5000 cycles, and good mechanical flexibility under different bending angles, which confirms that the hierarchically porous NaCoPO₄–Co₃O₄ hollow microspheres are promising active materials for the flexible supercapacitor.