An ab initio study of electrochemical vs. electromechanical properties: the case of CO adsorbed on a Pt(111) surface

We have studied electrochemical vibrational and energy properties of CO/Pt(111) in the framework of periodic density functional theory (DFT) calculations. We have used a modified version of the previously developed Filhol-Neurock method to correct the unphysical contributions arising from homogeneous background countercharge in the case of thick metallic slabs. The stability of different CO adsorption sites on Pt(111) (Top, Bridge, Hcp, Fcc) has been studied at constant electric field. The energies are dominated by the surface dipole interaction with the external electric field: a strong positive electric field favors the surfaces with the lower dipole moment (that correspond to the ones with the lower coordination). The Stark tuning slope of the CO stretching frequency for a Top site was calculated for different surface coverages in very good agreement with both experimental and other theoretical results. Finally, we have performed an analysis of the origin of Stark shifts showing that the total Stark effect can be split into two competing components. The first one corresponds to the direct effect of charging on the C-O chemical bond: it is referred as an electrochemical effect. The second is the consequence of the surface dipole interaction with the applied electric field that modifies the C-O distance, inducing a change of the C-O force constant because of C-O bond anharmonicity: it is referred as the electromechanical effect. In the CO/Pt(111) case, the dominant contribution is electromechanical. The electrochemical contribution is very small because the electronic system involved in the surface charging is mostly non-bonding as analyzed by looking at the surface Fukui function.     

X-ray emission spectroscopy of (2 square root of 3 x 2 square root of 3)R30 degrees CO/Ru(0001): comparison to c(2x2)CO/Ni(100) and c(2x2)CO/Cu(100)

The atom specific electronic structure of (2 square root of 3 x 2 square root of 3)R30 degrees CO on hcp Ru(0001) has been determined with resonantly excited x-ray emission spectroscopy. We find that the general features of the local adsorbate electronic structure are similar to the situation of CO adsorbed on the fcc metals Ni(100) and Cu(100). The interpretation of the surface chemical bond of (2 square root of 3 x 2 square root of 3)R30 degrees CO/Ru(0001) based on the direct application of the local, allylic model from on-top adsorption on the fcc(100) surfaces Ni(100) and Cu(100) explains many aspects of the surface chemical bond. However, also nonlocal contributions like adsorbate-adsorbate interaction and the deviation from upright on-top adsorption on the Ru(0001) surface influence observables like the heat of adsorption and the Me-CO bond strength.     

甲氧基在Rh(111)表面吸附的密度泛函研究

采用密度泛函理论(DFT)的B3LYP方法,以原子簇Rh13(9,4)为模拟表面,在6-31G(d,p)与Lanl2dz基组水平上,对甲氧基在Rh(111)表面的四种吸附位置(fcc、hcp、top、bridge)的吸附模型进行了几何优化、能量计算、Mulliken电荷布局分析以及前线轨道的计算。结果表明,当甲氧基通过氧与金属表面相互作用时,在bridge位的吸附能最大,吸附体系最稳定,在top位转移的电子数最多;吸附于Rh(111)面的过程中C—O键被活化,C—O键的振动频率发生红移。     

CO吸附在过渡金属铂表面的微观动力学研究

建立了处理双原子分子-表面相互作用的推广的LEPS势.借助推广的LEPS势,系统研究了一氧化碳分子在铂低指数表面吸附的动力学特性,重现了低指数表面的分子吸附热、吸附几何及本征振动等实验数据；鉴定了某些不合理的文献信息,预测了实验尚未探测到的重要信息:预测到Pt(100)表面四重洞位的C－O伸缩振动频率为1 962.60 cm－1;预测到Pt(110)表面吸附态的C－O及C－Pt键长分别为115.1、147 pm.     

二甲醚在Pt（100）表面吸附的密度泛函理论研究

采用密度泛函理论(DFT)方法结合周期性平板模型,研究了二甲醚(DME)分子在Pt(100)表面上的吸附.通过对不同吸附位(顶位、空位和桥位)下的几何结构、吸附能和mulliken电荷布局计算发现,吸附后C-O键和C-H键都有不同程度的伸长,top位的吸附能最大,hcp位最小;top位吸附有利于C-O键的断裂,bri位吸附则更利于C-H键的断裂。     

Thermodynamics of carbon monoxide adsorption on polycrystalline titania studied by static adsorption microcalorimetry

The adsorption of CO on polycrystalline TiO2 was investigated by static adsorption microcalorimetry. The initial differential heat of adsorption (qdiff,0) of CO on polycrystalline titania is 40 kJ/mol, and the standard adsorption entropy (Deltas0) is -104 J mol(-1) K(-1). These results are consistent with those derived from temperature-programmed desorption and FTIR results in the literature. The good reproducibility of the isotherms and the stable qdiff indicate that the lattice oxygen and hydroxyl groups on titania surface are basically not reactive to adsorbed CO.     

CO在Ni(100)面吸附模式的研究

本文首次将McGreery的推广LEPS法用于异核双原子分子的吸附势能面.设CO在Ni面上的吸附位置有3种(图1).取Sato参数为0.5,所得典型的势能面示于图2、图3.当C—O键平行于表面并接近Ni面上的3种吸附位置时,各势能面均与图2类似,先进入一势阱,然后越过势垒进入第二势阱.发生解离型C及O的原子吸附时,共有4种模式.各势能面上表征吸附的参数列于表1,吸附模式见图1.在4种吸附模式中最稳定的是C模式,即对角相邻5CN上的解离双原子吸附,R_(c-o)=6.65a.u.,它是R_(c-o)(平衡)=2.17a.u.的三倍多.当CO键与表面垂直且接近Ni面上3种吸附位置时所得势     

基于密度泛函理论计算的CO2在SrTiO3(100)表面的吸附

通过密度泛函理论的第一性原理,模拟了CO2分子在SrTiO3(100)表面TiO2-和SrO-位点上的吸附行为,获得了CO2在几种不同吸附模型下的结构参数及表面吸附能,进而研究了吸附机理和结构稳定性.计算结果表明,当CO2的C原子吸附在SrTiO3(100)表面SrO-及TiO2-位点的氧原子上时,吸附结构较稳定,尤其是C、O原子共吸附在TiO2-位点时最稳定,而其余吸附模型则不稳定.对吸附稳定模型的Mulliken布局数及态密度分析显示:CO2分子在SrTiO3(100)表面吸附主要是由于SrTiO3(100)面的电子跃迁至CO2分子,CO2分子得到电子形成弯曲的CO2-阴离子结构,并伴随着C-O键的伸长,从而达到吸附活化CO2的目的.     

First-principles Periodic Density Functional Study of CO Adsorption on Spinel-type CuCr2O4 (100) Surface

The catalytic properties of CuCr2O4 with the cubic normal spinel-type structure were discussed by means of studying CO adsorption on the CuCr2O4 (100) surface in the framework of density functional theory. The results of geometry optimization show that CO prefers to adsorb at a Cu site with the adsorption energy of 133.2 kJ/mol. The adsorptions at all sites lead to a decrease in C-O stretching frequency, an increase in C-O bond length and a net positive Mulliken charge for the CO molecule. Population analysis indicates that the charges transfer from the CO molecule to substrate. The density of states for CO molecule before and after adsorption are also computed to discuss the bonding mechanism of CO.     

Consistent approach to adsorption thermodynamics on heterogeneous surfaces using different empirical energy distribution models

Adsorption on heterogeneous surfaces with three basic energy distribution models (uniform model, exponential model, and normal-like model) is studied. Exact analytical solutions of the adsorption isotherms and the heats of adsorption are derived for the uniform and exponential models, and, with these solutions including a numerical solution for the normal-like model, the behavior of the differential heat of adsorption and the "apparent" standard adsorption entropy concerning the overall surface is described as a function of coverage and temperature. The approximations underlying the isotherms and heats of adsorption in the Temkin, Freundlich, and Langmuir-Freundlich types of adsorption are rationalized. By comparing these empirical formulas to the exact solutions, the level of these approximations is found to be identical, which is similar to the "condensation approximation". Their preconditions are that either the temperature is low enough, or the surface is strongly heterogeneous. Generally, they are suitable for the middle coverage range. The exact solutions provide a method to obtain more information on the heats, entropy, and heterogeneity of the catalyst surface from the calorimetric measurement of the heat of adsorption.     

铑催化合成气制乙醇反应中CO断键途径的研究

利用程序升温表面反应─红外（ＴＰＳＲ－ＩＲ）动态技术考察ＣＯ吸附物种对氢的反应性能并检验表面反应生成的中间物，结果表明线式ＣＯ对氢的反应性能高于桥式ＣＯ，即线式ＣＯ更可能是活性吸附态；表面反应生成了ＨＣＯ、ＣＨ２等中间物．用键级守恒（ＢＯＣ）－Ｍｏｒｓｅ势方法计算比较了ＣＯ→ＣＨ２过程中各可能基元步骤在Ｒｈ（１１１）面上的反应活化能和反应热，结果表明ＣＯ经其部分氢化物种（如Ｈ２ＣＯ、ＨＣＯＨ）的氢解反应断裂Ｃ─Ｏ键在能量上最有利．根据这些实验结果，提出铑基催化剂上合成气转化反应主要按缔合式机理进行；ＣＯ的优势断键途径为先部分氢化，而后氢助断键．     

Adsorption of Carbon Dioxide on Activated Carbon

The adsorption of CO2 on a raw activated carbon A and three modified activated carbon samples B, C, and D at temperatures ranging from 303 to 333 K and the thermodynamics of adsorption have been investigated using a vacuum adsorption apparatus in order to obtain more information about the effect of CO2 on removal of organic sulfur-containing compounds in industrial gases. The active ingredients impregnated in the carbon samples show significant influence on the adsorption for CO2 and its volumes adsorbed on modified carbon samples B, C, and D are all larger than that on the raw carbon sample A. On the other hand, the physical parameters such as surface area, pore volume, and micropore volume of carbon samples show no influence on the adsorbed amount of CO2. The Dubinin-Radushkevich (D-R) equation was the best model for fitting the adsorption data on carbon samples A and B, while the Preundlich equation was the best fit for the adsorption on carbon samples C and D. The isosteric heats of adsorption on carbon samples A, B, C, and D derived from the adsorption isotherms using the Clapeyron equation decreased slightly increasing surface loading. The heat of adsorption lay between 10.5 and 28.4 kJ/mol, with the carbon sample D having the highest value at all surface coverages that were studied. The observed entropy change associated with the adsorption for the carbon samples A, B, and C (above the surface coverage of 7 ml/g) was lower than the theoretical value for mobile adsorption. However, it was higher than the theoretical value for mobile adsorption but lower than the theoretical value for localized adsorption for carbon sample D.     

CO和H2分子在Cu(111)面的吸附和溶剂化效应

采用广义梯度近似(GGA)密度泛函理论(DFT)的PW91方法结合周期性模型, 在DNP基组下, 利用Dmol3模块研究了CO和H2在真空和液体石蜡环境下在Cu(111)表面上不同位置的吸附. 计算结果表明, 溶剂化效应对H2和CO的吸附结构参数和吸附能的影响非常显著. 在液体石蜡环境下, H2平行吸附在Cu(111)表面是解离吸附, 而CO 和H2在两种环境下的垂直吸附都是非解离吸附. 相比真空环境吸附, 在液体石蜡环境中, Cu(111)吸附CO时, 溶剂化效应能够提高CO吸附的稳定性, 同时有利于CO的活化. 在真空中, H2只能以垂直方式或接近垂直方式吸附在Cu(111)表面. 当Cu(111)顶位垂直吸附H2, 相比真空环境吸附, 溶剂化效应能够提高H2吸附的稳定性, 但对H2的活化没有明显影响. Cu(111)表面的桥位或三重穴位(hcp和fcc)垂直吸附H2时, 溶剂化效应能明显提高H2的活化程度, 但降低H2的吸附稳定性; 在液体石蜡中, 当H2平行Cu(111)表面吸附时, 溶剂化效应使H—H键断裂, 一个H原子吸附在fcc位, 另一个吸附在hcp位.     

Structures and vibrational frequencies of CO adlayers on Rh(111) surface

The adsorption of carbon monoxide on single-crystal transition metal surfaces has been the subject of numerous studies, because it has served as a model system for the adsorption of small molecules on transition metal surfaces, and its industrial importance is obvious in such areas as catalytic reaction. The bonding of carbon monoxide to rhodium is of special interest since this metal catalyzes the hydrogenation of CO to produce hydrocarbons in both heterogeneous and homogeneous media, and it …     

Activation of the C-O bond on the surface of palladium: An <Emphasis Type="Italic">In situ</Emphasis> study by X-ray photoelectron spectroscopy and sum frequency generation

An in situ study of the adsorption of CO on atomically smooth and defect Pd(111) surfaces was performed over wide ranges of temperatures (200–400 K) and pressures (10^–6-1 mbar) by X-ray photoelectron spectroscopy and sum frequency generation. Both of the techniques indicated that CO was adsorbed as three-fold hollow, bridging, and terminal species to form well-known ordered structures on the surface. In the course of the in situ experiments, no signs of CO dissociation or of the formation of carbonyl structures (Pd(CO)_n, n > 1) were detected. The mechanism of C-O bond activation in the course of methanol decomposition on the surface of palladium was considered. It was found that the adsorption of methanol on the surface of palladium essentially depends on pressure. Along with the well-known reaction path of methanol dehydrogenation to CO and hydrogen, a slow process of methanol decomposition with C-O bond cleavage was observed at elevated pressures. In this case, the formation of carbon deposits finally resulted in the carbonization and complete deactivation of the surface. A mechanism for C-O bond activation on the surface of palladium was proposed; the geometry of adsorption complexes plays an important role in this mechanism.__________Translated from Kinetika i Kataliz, Vol. 46, No. 2, 2005, pp. 288–301.Original Russian Text Copyright © 2005 by Kaichev, Bukhtiyarov, Rupprechter, Freund.     

Adsorptive denitrogenation of indole from model fuel oil over Co-MAC: Adsorption mechanisms and competitive adsorption

The present research article depicts the adsorptive denitrogenation of indole-containing model oil using cobalt-incorporated acid-activated carbon (Co-MAC). The active metal incorporated acetic acid-activated bio-sorbent showed a significant adsorption capacity for indole from model fuel oil than mere activated carbon. In a batch study, maximum 96% indole removal was achieved with an initial indole concentration of 500 mg/L, catalyst dose of 10 g/L, time of 4 h, and reaction temperature of 303 K. The non-linear regression analysis was opted to fit the experimental equilibrium data into various adsorption isotherms, including Langmuir, Freundlich, Temkin and Redlich, and Peterson. Thermodynamic parameters of adsorption were investigated, and the entropy and heat of adsorption change were determined to be 0.26 kJ/mol K and 57.31 kJ/mol, respectively. Besides, a plausible adsorption mechanism of indole was also explored.     

Rh2CO2/Al2O3上H2吸附及CO和H2共吸附

CO加氢反应机理一直是许多化学工作者感兴趣的课题．Rh催化剂因其优良的性能而被用于 CO加氢机理研     

CO分子在不同类型Al2O3表面的吸附构型和电子结构

采用基于赝势平面波基组的密度泛函理论方法对CO分子在α-Al₂O₃（0001）以及γ-Al₂O₃的（100）、（110C）、（110D）表面上的吸附构型和电子结构进行系统研究.计算结果表明,CO倾向于选取C端吸附在表层Al原子上,并主要通过其5σ轨道与表面发生作用,吸附后部分电子从CO转移到底物,导致各Al₂O₃表面功函均发生不同程度的下降,与气相相比,吸附后CO分子的C-O伸缩振动频率均发生蓝移.通过对比CO在各表面上的吸附情况,可以看出CO可作为检测Al₂O₂不同类型表面活性中心的有效探针分子.     

A DFT Study of CO Adsorption on the Cu2O（111） Surface with Oxygen Vacancy

First-principles calculations based on density functional theory （DFr） and the generalized gradient approximation （GGA） have been used to study the adsorption of CO molecule on the Cu2O（111） oxygen-vacancy surface. Calculations indicate that the C-O bond is weakened upon adsorption compared with that over perfect surface. In addition, with the density increase of the defective sites, the adsorption energies of the defect-CO configuration increase whereas the C-O bond nearly remains constant.     

Computational study of the adsorption energetics and vibrational wavenumbers of NH3 Adsorbed on the Ni(111) Surface

The structure and stabilities of NH(3) adsorbed on different sites of a Ni(111) surface are compared based on density functional, plane-waves calculations within a periodic framework. The surface has been modeled by 4- and 5-layer slabs with 2 x 2 and 3 x 3 unit cells. Calculated results are in good agreement with available experimental data, confirming the atop adsorption site to be the most favorable, with no preferred azimuthal orientation for the H atoms. For NH(3) adsorbed at the atop site, the one-dimensional potential energy profiles along the N-H and N-Ni bonds and the coupling between adjacent N-H bond oscillators have been calculated and fitted to an analytical expression using an accurate anharmonic potential model. Variational calculations have been performed to obtain frequencies for the N-H and N-Ni stretching vibrations and N-H stretching line widths. The model for calculating line widths has also been tested with CO adsorbed at the hcp hollow of the Ni(111) surface.